Form 10g with image cause FRM-40105, after FRM-92101.

I have a form with image.
I open another form in new window.
When return to first form, clicking in image, causes this error.
If click in another field, the error is not shown.
does solution exist?
tks.
Martonio.
Edited by: martonio on 15/10/2009 14:33

Hi!
Is there any when-mouse-click or when-new-item-instance on your image-item?
Regards

Similar Messages

FRM-92101: Load Balancing Forms 10g with Web Cache

Hi,
IÂ´m having some problems with Oracle Forms and Webcache 10g and I was wondering if you
could help.
Machines: (Pentium IV 2.6 GHz; 2GB RAM; 80GB HD)
A. Red Hat Linux AS 2.1
Oracle AS 10g - Infrastructure Installation
B. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
C. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
I didnÂ´t apply any Patchsets of Oracle AS 10g. My current version is 9.0.4.0 .
Goal:
Use Oracle Webcache 10g on machine B for Load Balancing an Oracle Forms Application
on machines B and C.
Facts:
The Oracle AS 10g installation on the 3 machines was made without problems.
The Forms Applications are running without problems on both Forms servers in machine B and C.
Symptoms:
IÂ´m getting the following error when I try to acces the forms application through Webcache:
FRM-92101: There was a failure in the forms server during startup.
This could happen due to invalid configuration.
Please look in the web-server log file for details.
But, this error happens ONLY when BOTH OC4J_BI_Forms instances (machines B and C) are
running.
When just one of the OC4J_BI_Forms is running everything works fine.
Webcache Configuration:
IÂ´ve followed Metalink note 207668.1: Configuring Web Cache as a Load Balancer for Application Servers
step by step to make the configuration of the following components:
1. Configuration of the origin servers
2. Configuration of Site definitions
3. Configuration of Site to server mapping
After that, IÂ´ve follwed the Metalink note 229900.1: Integrating and using Web Cache with Forms 9i for Load Balancing
step by step to make the configuration of the following components:
4. Session Binding
Then I try to test the Load Balancing and I got the error FRM-92101 when both OC4J_BI_Forms
instance were running.
IÂ´ve searched Metalink and found note 268830.1: Webcache Won't Load Balance 2 Forms Instances.
Following the note instructions I did the following changes:
Added these lines at the end of HTTPD.conf (machine B):
CookieTracking On
CookieName myformscookie1
Added these lines at the end of HTTPD.conf (machine C):
CookieTracking On
CookieName myformscookie2
In Webcache configuration:
IÂ´ve Changed the default session binding from JSESSIONID to "ANY SET COOKIE" for the
site's session binding.
But even after these changes IÂ´m getting FRM-92101 error on the same conditions.
How can I solve this problem ?
Thank you in advance.
Marcus Santos.
([email protected])

Just ran into this problem last Tuesday, Nov.30 and applied the changes today.
My configuration is similar to yours: 9.0.4 web cache on machine A, 9.0.4 10gAS forms and reports standalone on machine B and C (not a cluster, no infra).
I appended the Cookie lines you mentioned in httpd.conf located in $ORACLE_HOME/Apache/Apache/conf in both machines B and C.
One important thing you may have missed. After changing httpd.conf in each 9iAS instance, you need to make the change known to dcmctl so issue:
dcmctl updateConfig -ct ohs
Then do the following for each 9iAS instance and it should be ready for webcache:
dcmctl stop
dcmctl start
Setup Any-set-Cookie in webcache instead of JSESSIONID and the whole thing should now work. You can run a form through machine A which will load balance to either machine B or C (which can both be up). Then, try shutting down 9iAS on machine B or C and run a form again. They now all work.
HTH,
Raffy

FRM-92101: Load Balancing Forms 10g with Webcache

Hi,
IÂ´m having some problems with Oracle Forms and Webcache 10g and I was wondering if you
could help.
Machines: (Pentium IV 2.6 GHz; 2GB RAM; 80GB HD)
A. Red Hat Linux AS 2.1
Oracle AS 10g - Infrastructure Installation
B. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
C. Windows 2000 Server - Service Pack 4
Oracle AS 10g - BI and Forms Installation (Using Infrastructure on machine A)
I didnÂ´t apply any Patchsets of Oracle AS 10g. My current version is 9.0.4.0 .
Goal:
Use Oracle Webcache 10g on machine B for Load Balancing an Oracle Forms Application
on machines B and C.
Facts:
The Oracle AS 10g installation on the 3 machines was made without problems.
The Forms Applications are running without problems on both Forms servers in machine B and C.
Symptoms:
IÂ´m getting the following error when I try to access the forms application through Webcache:
FRM-92101: There was a failure in the forms server during startup.
This could happen due to invalid configuration.
Please look in the web-server log file for details.
But, this error happens ONLY when BOTH OC4J_BI_Forms instances (machines B and C) are
running.
When just one of the OC4J_BI_Forms is running everything works fine.
Webcache Configuration:
IÂ´ve followed Metalink note 207668.1: Configuring Web Cache as a Load Balancer for Application Servers
step by step to make the configuration of the following components:
1. Configuration of the origin servers
2. Configuration of Site definitions
3. Configuration of Site to server mapping
After that, IÂ´ve follwed the Metalink note 229900.1: Integrating and using Web Cache with Forms 9i for Load Balancing
step by step to make the configuration of the following components:
4. Session Binding
Then I try to test the Load Balancing and I got the error FRM-92101 when both OC4J_BI_Forms
instance were running.
IÂ´ve searched Metalink and found note 268830.1: Webcache Won't Load Balance 2 Forms Instances.
Following the note instructions I did the following changes:
Added these lines at the end of HTTPD.conf (machine B):
CookieTracking On
CookieName myformscookie1
Added these lines at the end of HTTPD.conf (machine C):
CookieTracking On
CookieName myformscookie2
In Webcache configuration:
IÂ´ve Changed the default session binding from JSESSIONID to "ANY SET COOKIE" for the
site's session binding.
But even after these changes IÂ´m getting FRM-92101 error on the same conditions.
How can I solve this problem ?
Thank you in advance.
Marcus Santos.
([email protected])

Did you ever Get this to work?
I am having some problems trying to load balance with Oracle Forms, Discover and reports Oracle Application Server Release 10g (9.0.4.0.2) and I was wondering if you could help. Has any one ever got this to work consistently? We are an ERP product written mostly in forms (904) and are trying to implement are largest customer there performance issue so we need the load balancing to work. Will also accept other recommendation as cost effective as solutions.
Site 1:
A: SERVER
     Host as1.xyzco.local
     Version 10.1.2.0.2
     Installation Type Identity Management and Metadata Repository
     Oracle Home E:\oracle\inf_1012
     Farm as1db.xyzco.net
o     HTTP_Server
o     Internet Directory
o     OC4J_SECURITY
o     Single Sign-On:orasso
o     Management
B SERVER
     Host as2. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o     Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
C SERVER
     Host as3. xyzco.local
     Version 9.0.4.0.2
     Installation Type Business Intelligence and Forms Discoverer and Reports
     Oracle Home E:\oracle\mid_904
     Farm as2db. xyzco.net
o      Discoverer
o     Forms
o     home
o     HTTP_Server
o     OC4J_BI_Forms
o     Reports Server
o     Web Cache
o     Management
All servers Are:
     Windows 2003 Standard Server with current service packs
     Xeon Dual Processor with 4GB ram
     Raid 0 drives 2 for OS and 2 for Oracle
Daniel Brody
[email protected]

Forms 10g menu image

Hii,
I am using forms 10g in which i am having a image showing my application information. I want this image to be displayed all the time. Is there ant thing such as menu can be having image.
One solution i have that is i am using a form in full size which is having image and i am displaying this form with no close allowed property.
But when i am opening a another form and i clicks on the form with image the form i have opened hides behind this form with image. How can i handle this situation.
please help

There is a solution in MetaLink. See Subject: "Drop Downs Don't Work With Dual Monitors (Extended Desktop)".
Symptoms
When Forms application is dragged from a monitor to another in a dual monitor system, the drop down lists stops working
Cause
This issue was caused both by the lack of Multi-screen Setup Support in Java versions prior to JDK1.2 and by Bug 2772796 - Apps6: Drop Down Menus Invisible When Using Dual Or Multiple Monitor Setup
The bug is fixed in Forms 10.1.2.2 and beyond. It allowed the bounds to be calculated fine across the now available displays.
Solution
If using Forms version 9.0.4.3 then you can apply Patch 2772796 on top of it.
If using Forms 10.1.2.0.2 then upgrade to Forms version 10.1.2.2 or beyond.
Note: If using Oracle Applications 11i, please consult the solution rather in the Note 430179.1 - Drop Down Menus Invisible When Using Dual Or Multiple Monitors

How to read a Value from Excel Cell into Oracle Forms 10g with Java

Did any one Implamented a Java PJC to integrate Excel on Oracle Forms 10g?
I Open Excel Applikation.
Open a File like c:\import_test.xls
read a number 05 from A:1 (i get it as return value).
Save a number in a variable in Forms 10g
Can any one help my please?
Thanks

why don't you use webutil.
it has package client_ole2 which allows you to have programmatic interface with excel application.
this is especially useful if the excel to be read is available in the client.

Forms 10g with MS Access

Hi Guys,
I m developing one s/w in forms 10g. my old data is in MS Access 97. I like to manipulate data in access as wel as in oracle. I installed oracle 9i database with Tramparent gateway to use non oracle database. I can manipulate data from sqlplus in MS access. But when i tried the same statement in Forms 10g and try to compile , it gives error and close the program. (Illegal Operation ).
Could any one help me to connect to the MS access from forms 10g?.
Thanks in advance.

Look for a file called oca_info.pdf on your install. This is the file which tells you about connecting to non oracle dbs.
Regards
Grant Ronald
Forms Product Management

Error running forms 10g with OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Did you save the form before running it, in the context of the builder? there is a known bug in this area.
Patrick.

Is it possible to use Oracle Forms 10g with Oracle 10g Lite Database?

Hi All,
We are in process of migrating our forms from 6i to 10g environment.
We have two kinds of applications, one set run on general Oracle 11g database and the other set of forms run at the client machine using Oracle lite database.
We dont have any problem with Forms 6i to connect to Lite database as it allows to connect through ODBC:DSN names. When we try to connect to a lite database (10gR3) from Forms 10g through ODBC/DSN, it's not allowing and throwing the below error.
ORA-03121 : no interface driver connected - function not performed
Can someone tell me if there is something wrong in our approach? Also advise how to use Oracle Lite database with Forms 10G.
Sincerely,
Praveen Manthena

Hi,
I have experience with 6i with lite database 10g. There are two version of lite database one is multi language support and other one in english. There lang problem in connectivity with multi language 10g lite database. I done connectivity with single language connectivity of 6i with 10g lite database. You should try this one with forms 10g.
Regards,
Naveed Ali

Opening message with image causes Mail to quit

In the last few days Mail has started to quit when I open certain messages with images attached. I can't think of anything I have done differently in the last few days to cause this. Any ideas?

When an application crashes (i.e. quits unexpectedly), the system writes information about the state of the application at the moment of the crash to a log file. That information is called a crash report and it makes troubleshooting much easier. In order to find and paste the relevant part of the crash report here, proceed as follows:
1. Open ~/Library/Logs/CrashReporter/Mail.crash.log. The whole Mail crash log appears in a Console window (you can also open that file with any text editor). It may contain many crash reports. We only want the latest, which is located at the bottom of the file.
2. Look for a line that begins with "Date/Time:" as close to the bottom as possible, and another that says "Thread N Crashed:", where N is a number. Select everything from the "Date/Time:" line to the lines immediately following "Thread N Crashed:". Copy that text and paste it here. Do not post the whole crash log, and do not include anything beyond the lines immediately following "Thread N Crashed:" either, just the relevant part.
Take a look at the following thread for examples of what a crash report looks like:
http://discussions.apple.com/thread.jspa?threadID=466701
Note: For those not familiarized with the ~/ notation, it refers to the user's home folder, i.e. ~/Library is the Library folder within the user's home folder.

How to connect oracle forms 10g with oracle 10g express database?

Hi all,
I have downloaded and installed oracle forms 10g and oracle database 10g express, when I open net configuration assistant to test local net service, I tested the default service (EXTPROC_CONNECTION_DATA) BUT THE RESULT IS "ora-28547 connection to server failed probable oracle net admin error"
How can I solve this issue?
My tnsname.ora is located in c:\DevSuiteHome\network\admin\tnsnames.ora, and its contents is:
# tnsnames.ora Network Configuration File: c:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = nour-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
Edited by: user10228498 on Jan 21, 2011 11:37 PM

I copied the contents of C:\oraclexe\app\oracle\product\10.2.0\server\NETWORK\ADMIN\tnsnames.ora and appended it to C:\DevSuiteHome\NETWORK\ADMIN\tnsnames.ora
and tried net configuration management to test local net service, the test was ok, thus the first problem resolved.
but the login problem in forms developer still exist and it claims that: ora-12154 tns could not resolve the connect identifier specified.
any ideas?

Form 10g with windows mobile 10g

i want to run oracle forms 10g on windows mobile 6 does anyone have an idea how to do this?
Is there is any jinitiator for windows mobile or jre to install it?
sincerely.

Neither Forms (Developer Suite or Application Server) or Jinitiator is supported on any mobile platform. Please refer to the following for a list of supported platforms. The list applies to both Application Server and Developer Suite:
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html

Why does double-click when trace on causes FRM-92101

Hi:
We have approximately 10 users for which we turned trace on. For some reason, when this user community double-clicks on a forms open space (i.e. on a non-item's canvas pixel), the sessions crashes and gives the following error:
FRM-92101: There was a failure in the Forms Server....
When you click the Details button you see the Java stack associated as follows:
Java Exception:
oracle.forms.net.ConnectionException: Forms session <115> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
Can somebody shine some light on this?
Is it the forms code?
Is it the back end?
Is it a connection to a website where we are trying to get something from?
Thanks,
Thomas

OK - I found the culprit. It seems that the Answers.com '''1-Click Answers''' utility had changed its behavior. In its Options on the Activation tab is an option to activate it when using double-click in a browser. I don't remember turning it on, but it ''was'' on. When I turned that option off, the problem went away. Apparently it is not compatible with FF8, since double-click was apparently intercepted, but 1-Click Answers was not activated - the double-click simply became a no-op.
Now that I've turned off that option, double-click in FF8 is back to the way it's supposed to work for quickly selecting a whole word or sentence.
If anyone else encounters this problem, I hope this information will help to resolve it.

Running report from forms 10g with parameters

db and dev 10g ,
hi all , my report displays "sal and ename" columns of scott/tiger schema .
i've seen a lot of articles talking about this but i want you to help me to get it :
1- i want to run report by assigning a value to the "report other" property of the report object .
i've tried it like so , i wrote sal = 800 or ename = 'SCOTT' in that property "report other" . and it did not work .
2- and i want to how to do the same with "set_report_object('myrep',report_other,..........) ;
3- i did it before with a parameter list by creating a parameter in the report builder called "p_sal" and p_ename then
created a parameter list with :sal and :ename text_items as parameters then added the parameter list to
run_report_object('myreport',pl) and it did not work too .
please clarify these to me
thanks a lot

newbi_egy wrote:
SET_REPORT_OBJECT_PROPERTY(ro,REPORT_OTHER, 'p_deptno='||:dept.deptno||'paramform=no');
     v := run_report_object(ro) ;
     web.show_document('http://rocky:8889/reports/rwservlet/getjobid'||substr(v,instr(v,'_')+1)||'?server=rocky','_blank') ;
     end ;
when i press the button , FRM-41214 shows up in the form , and REP-52251 ,and i still can not run it .
do i miss something ?
by the way , when i typed this in the address bar :
http://rocky:8889/reports/rwservlet/showjobs?server=rocky , then clicked "x" button , then
i got this
<br>REP-300: invalid number where deptno = : ==> p_deptno finished with error
thanks
Hi,
You can not check the second link i provided where parameter passing issue is clearly mentioned. you should give space before all parameter.
Check the second link, it will help you. And for your correction
SET_REPORT_OBJECT_PROPERTY(ro,REPORT_OTHER, 'paramform=no p_deptno='||:dept.deptno);Hope you understand...
Hamid

Running Forms Https (forms 10g with A/S and webcache)

I'm trying to implement Credit Card processing for applications in our agency. The environment is in the subject. There will be two types of applications that need to process credit cards:
1. Users coming in through our external website running java applications.
2. Internal users running Oracle Forms (against another App Svr deployment)
I'll be using a payment gateway accessible via a web service to authorize the card. I can talk to this via a java w/s client proxy w/o a problem. Here's the problem though:
I've been told that when forms are running https, ALL forms running on the application server, regardless of application will now be running https. I'd like the Credit Card entry Oracle Form to be running https, but don't see how this affects all the other forms in our environment (hundreds of them). Can't one screen (http) call a CC screen (this one only running https), and they can enter the card into that? From the reading I've done this should be possible.
I'm not the Application Server admin. This is what I've been told, and I cannot configure the environment. I've been told that Forms will now have to call a JSP CC entry screen that I write and that screen would now invoke the web service. Of course, my concern is that the oracle form and the jsp screen are now asynchronous, and one won't be able to tell when the other is done (unless I poll on the form, or go the route of PJCs and javascript - I've seen an article for this already --- HOWEVER, this was shot down as well.)
My question boils down to:
1. Can I run all my other forms http, and then this CC screen https (via a web.show_document), and then it can hit the web service directly via a java imported client proxy rather than me writing extra methods, and another screen/conf page that's specific to forms users?
[I need to run forms https since the default 40-bit encryption is not enough.]
Here are my related questions/threads to this one:
Forms Client Side Encryption and invoking external Secure Service via URL
Forms Client Side Encryption and invoking external Secure Service via URL
encrypting creditcard for "in-transit"
encrypting creditcard for "in-transit"
loadjava sunrsasign.jar
loadjava sunrsasign.jar
As always, help is very much appreciated, and a very big thannks for any answers/suggestions.
Eric

Eric,
You may want to ask your question in the App Server forum.

Forms 10g: error FRM-92101: There was a failure in the Forms Server during

AS10g (9.0.4.1) on windows 2000 with 2 GB of ram
We have an application with 10 - 15 users. Sometimes,when users exit from forms with the command exit_form, in a randomic way the form hangs with the error FRM-92101: There was a failure in the Forms Server during startup.....
After the users have to close the browser and open another sessione of explorer.
In the same time other users work fine.
The problem happens more then 10 times a day.
Is there a solution ?

I have also run into similar problem.
In my case, this problem has been carried over from Forms 6i to Forms 10g. In forms 6i it wrote an error file in the same folder where *.fmx file was stored.
For 10gAS, look into <ORACLE_HOME midtier>\forms90\trace folder for a file *.trc. Open it up in notepad. It will tell you which trigger was being executed when the form failed.
Put any comment in the PL/SQL of that trigger, recompile the form and the problem will go away.
I usually put something like:
dummy statement for FRM-92101.
I do not know why it works but in my case it has.
Good luck !!!
Would like to know if it works for you.
Suresh

Form 10g with image cause FRM-40105, after FRM-92101.

Similar Messages

Maybe you are looking for