Form responses/tracker. How to re-sync after OS upgrade?

Hi,
I'm using Adobe Acrobat 9 Pro Extended. About 10 days ago I distributed a form via acrobat.com and was receiving responses in the usual file *_responses.pdf.
Since then I upgraded my XP x64 to Windows 7 x64, and reinstalled all software.
Now tracker doesn't sync and my *_responses.pdf, when I open it, doesn't show the answers I had already received for my questionaire.
Not only can I not access the responses I had already received, but I can't figure out how to access any new ones people may send as a reply.
I have entered my acrobat.com account in my reinstalled Adobe Acrobat 9 Pro Extended, but no change.
Opening the resposes file shows it to be empty of replys.
What can I do to at least access whatever responses people may be sending now?

If I go on to the Apple TV and tell it to add a shared library, I see the aTV show up in my iTunes devices list so.........
Not sure that should happen if the the primary library is linked properly, the itunes library can't be linked as a primary AND a secondary library. Perhaps your only option is to relink the library and the tv.
(Please excuse my unsupported nomenclature)

Similar Messages

Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

Hi we setup ISE in our lab. We have 2 PSN registered but one of the node is out of sync after I upgraded form 1.1 to 1.2

For out of sync issues, which most likely are due to time changes or NTP sync issues, you must correct the system time and perform a manual sync up through the UI.
For certificate expiry issues, you must install a valid certificate and perform a manual sync up through the UI.
For a node that has been down for more than six hours, you must restart the node, check for connectivity issues, and perform a manual sync up through the UI.

How setup LDAP Sync After Install in OIM 11g ver, 11.1.1.5.0

Hi guys, I'm trying to find how to setup LDAP Sync After Install in OIM 11g (ver, 11.1.1.5)....
I found on Metalink an interesting article "*How to Setup LDAP Sync After Install in OIM 11g [ID 1272682.1]*", but inside there is a Note that says:
Note: This article is applicable to OIM version 11.1.1.3 only. Steps for 11.1.1.5 are not the same, and product manual has documented steps to setup LDAP sync after install.
So, that the steps for 11.1.1.5 are not the same, it's clear.....
and I tried to look for these steps in the manual:
Oracle® Fusion Middleware Quick Installation Guide for Oracle Identity Management
11g Release 1 (11.1.1)
Part Number E10033-06
but I didn't still find nothing for the specific 11.1.1.5.0 version....only for the 11.1.1.3.0 version
Can anyone help me to find where these steps are ? I need this information as soon as possible ti start the development
Thanks in advance for the help
Alex

If you are creating Before and After Create Opeation script, you would be able to access all the variables in the process form. Now obvious question, what are the names of these variables? The answer is: the name of the variable is same as that mentioned in the "decode" column of the provisioning attribute map lookup or in other words, the variable name is same as the AD attribute name. In the example mentioned in the documentation, the variable "%givenName% was used in the script. On the similar lines you can use other variables like "sn", "samAccountName", etc.
Hope the information helps.

Is the data automatically synced after you do the original setuop or do you have to do something to make it sync? How are changes synced after the original setup?

How is the information synced after the original setup? Is it done automatically or do you have do do something? And if so, what?

After you setup Firefox Sync, you do not have to do anything else. It will automatically sync your data in the background. <BR><BR>
See these articles for more information:<BR>
[[How to sync Firefox settings between computers]]<BR>
[[What is Firefox Sync?]]

Email (mail form) response tracking in Campaign Management

Hi ,
There is a requirement in my project where we need to track the reponse of a campaign .
We are executing campaigns through mail forms which are being sent to a selected target group.
We want to track the number of people in the target group who have read the mail form and send a confirmation mail back to the sender.
Can it be done through PRCu2019s (Personal Response Codeu2019s ) or Repsonse Id's .
Could please guide me ?Any suggestions would be welcomed.
Regards,
Maroof

Hi Satish
Can you help me out with regard to redirection of URL as i am stuck with the same scenario as you explained in your answer, where i have to use Intermediate site option for sending links in email for the tracking for customers. I hvae done the config settings, it is works fine Internal nework, but i am not sure how i can do the re-direction of the URL. Can you please explain me
example:
I am sending email with following link
https://www.xxx.com/customersupply/xxx.html (External Link)
i need to re-direct to to our CRM system which is
http://hxxxx.com:8000/ (CRM System)
Thank you in advance
regards
shankar

How to restore sync after reset?

After a troubleshooting re-set on my windows pc my sync is no longer active. when i try to reactivate it on the tools drop-down i see two options: 1) "set up sync" which gives me the options of "create a new account" or "i have an account") or 2) tools --> options --> options --> sync which gives me the choices "set up firefox sync" or "pair a device." on my existing/previously paired device (a mac) the tools menu shows only a "sync now" choice. none of the available choices seem to fit so how do i proceed to get an existing sync account working on my windows pc? the instructions, if any, on doing exactly this are vague. i do have my sync account email, password and recovery key. sorry if i am missing something here. thank you.

Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Tools > Options > Sync" or "Firefox > Set Up Sync"
# click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
# click "I Have an Account" : Connect
# click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key)
# click the "Sync Options" button at the bottom to select what to sync
*https://support.mozilla.org/kb/how-do-i-set-up-firefox-sync
*https://support.mozilla.org/kb/add-a-device-to-firefox-sync
*https://support.mozilla.org/kb/how-do-i-manage-my-firefox-sync-account
*https://support.mozilla.org/kb/firefox-sync-troubleshooting-and-tips

Some WMA/DRM files won't sync after firmware upgrade on Zen Touch

I downloaded an eaudio book from my library, which grants a 2 day license. Prior to upgrading the firmware (to the latest available) on my Zen Touch, I was able to upload this book and play it while walking, etc.
At the same time, I was able to upload several other books I had downloaded and licensed. All are WMA/DRM.
After upgrading the firmware, I was able to resync some of the books I'd downloaded to my Zen Touch. Several, however, yield error messages--no matter how I try to upload them (WMP, Creative MediaSource, Zen Touch Media Explorer). All refuse to let me upload.
These books previously uploaded/played just fine. Note: they still play fine using WMP and Creative's software. But, it's a bit difficult to lug my desktop around when walking/running through the woods.
Any idea what the problem might be? All MediaSource says is:
<IMG src="http://herb.thetysons.org/images/CMC-error.jpg">
WMP0 tells me that "an unknown error" has occurred. Neither event is significant to make it to the system's application event log.
Any ideas on why these files--which could be tranferred before--can't be transferred now? The licenses are still valid, and the file format is identical to those that transferred without incident.

OK, my update. After reading the recent responses (thanks!), I performed the following experiments.
1) Reverted to the original v2.0 via factory restore, relinked to the Mac. ATV immediately copied over my entire library (one movie, lots of music) from the Mac, because I have iTunes checked marked for Automatic Sync ("iTunes automatically chooses the audio and video to sync, etc.").
*I consider this to be normal and expected behaviour.*
2) Downloaded and installed the 2.1 update (again...). After reboot the ATV was still on my network and still linked to my Mac. However there was no longer any media content on the ATV (as before).
*I do not consider this to be normal, expected behaviour. Nor, for that matter, is wiping user content acceptable.*
3) Cancelled and relinked ATV to Mac. As soon as the linking code was entered, automatic sync started. Only the one movie was copied, but no music.
*I do not consider this to be normal, expected behaviour.*
4) When that sync was completed I went and checked all the songs in one album in iTunes as a quick test, then sync'd again. That song was promptly copied to the ATV.
Progress!
5) Checked all songs, initiated a new sync and they're being copied as I write.
Success!
So v2.1 requires music to be manually selected in iTunes in order for automatic sync to work. Anyone not spot a contradiction in terms? Furthermore that was certainly not the case in software versions prior to 2.1, nor was this change communicated in any way I'm aware of to the user.
My conclusion is that this is either a bug, or else sheer thoughtlessness on Apple's part.
But my sincere thanks to those who've helped me to restore proper function to the ATV (well, fingers crossed), a device that I've become very fond of.
Neil

IPod classic will not sync after iTunes upgrade

After upgrading to the latest version of iTunes - 10.6.1.7 - yesterday, my iPod classic is not recognized and I cannot sync it.
The iPod does appear as a drive on my computer (with Windows XP). The screen message on the iPod states that it is synching with iTunes, the iTunes message states it is synching with the iPod - but the iPod does not download anything new from iTunes and it does not appear as a device on iTunes.
I've gone through the steps for troubleshooting; I've tried syncing the iPod on two different computers - unfortunately both of which have been upgraded to the latest version of iTunes - with the exact same results.
It worked fine before I upgraded iTunes and I'm at a loss on how to fix this. Is there some way to uninstall the upgrade and reinstall the old version?
Suggestions are most welcome. Thanks much.

I am also having this problem. I have a 160gb classic that I bought last fall. I have a work computer I've used for my iTunes synch base due to broadband access. The system had worked well enough with 64 bit XP and a few registration tweaks to calm itunes about working in that old environment. Forward to 2 weeks ago - I copy my library to the network drive so that IT can scrub the computer and upgrade me to Win 7. Computer is back up, install the newest version if iTunes, seems to come up fine. Several rounds of re-importing the library after it kept entering all the songs twice. Go to re-synch the ipod - get the 'this is a new device, erase *EVERYTHING* and re-synch. Yep yep. Sits there for nearly two hours saying it's re-uploading stuff. Then on the way home, I see - hey, a ton of stuff isn't there, lots of missing podcasts. Go check, everything is checked, new stuff downloaded, can listen to it on the PC with headphones. Then go synch the iPod - get the same 'things are updating..... synch finished'. And nothing has up- or down-loaded. Tried unchecking stuff, nada. Import new stuff, nada. Nothing Plus it looks like pretty much every CD i ripped into itunes for the past 4-5 months failed to move - maybe iTunes was saving it somewhere else than the My Music folder. PITA-factor of that aside, I'd really like to get at the last 3-4 weeks of podcasts. Any help on getting the system to actually do a real sy
My other changes in the last few weeks are getting a new iPhone to replace an old non-iPhone, so there is another devicee on the account. I don't see my iPod listed amongst my devices in the iTunes store - not sure if that's only for wireless stuff.
Help!!

IPhone Doesn't Finish Sync After Mavericks Upgrade

I have a 4S that is running iOS 7.0.3. When connected to the Mac two things fail to happen:
1 - iTunes doesn't launch and I have to manually do so
2 - The Sync is stuck in "Finish Sync" and the only way out without quitting iTunes is to tell the app to run a backup
Any thoughts
--Mitch

OSX Mavericks It's true that 'SyncServices' feature in OS X Mavericks is no longer availible but you can still use CardDAV servers, CalDAV servers, and servers that utilize the Exchange ActiveSync protocol to get the job done.Like · Reply · 2 hours ago
David S. Kapp I DONT HAVE ANY SERVERS! I AM ONE GUY WITH AN IPHONE AND A IMAC COMPUTER THAT IS NOW AS USEFUL AS A BOAT ANCHOR! YOU HAVE JUST COMPLETELY ****** UP MY OFFICE AND MY LAW PRACTICE. HOW ABOUT A HELPFUL RESPONSE!?!?!
<Link Edited By Host>

How to do recovery after my upgrade to Mountain Lion.

After upgrading to Mountain Lion from Snow Leopard, I found that I couldn't access Apple Works 6 or my saved DVDs from work travels. Does anyone know how to fix this? It represents 10 years of work.

If you need AppleWorks then you are going to have to return to 10.6
The easiest way to do that is to restore the back you took before the upgrade
Pages can open AppleWorks text documents and Number can open AppleWorks spreadsheets
Allan

Can't sync after computer upgrade

Hi,
Friday night I got a new MacBook pro. Yesterday I used the transfer function to move all of my files from my old MacBook to the new one.
This morning, I can't sync my iPad. My iPod does sync, so it isn't the ports on the MacBook or the cables.
I tried restarting both the iPad and the MacBook, and it still won't sync.
The iPad charges off the wall adaptor and when the cable is first plugged into the MacBook comes up with the charging screen, so it doesn't look like the iPad connector is broken.
Any suggestions on how to get them to sync?
Thanks,
Frank

Hi,
I have the same problem since I upgraded my OS from 10.5 to 10.6. Both my iPad and iPhone 4 are no longer detected by iTunes. I uninstalled iTunes and removed the Apple Mobile Device as described in http://support.apple.com/kb/HT1747 and that worked fine. both devices were detected and sync. However, the same problem came back the next day. I followed the same steps and once again I could sync. As you would have guessed, today it is no longer detected... looking for a permanent solution

IPhone will not sync after OSX upgrade

I have a iPhone 3GS (iOS 5.1) which I bought at the same time as a MacBook Pro. Last week I upgraded the operating system on the laptop to OS 10.9.4 (Maverick). I have had a heap of minor issues of things not working as they used to, but I have now discovered that the phone isn't synching. Nor is it sending an error message - it just exits the sync program.
I bought all Apple gear because I believed that I would avoid this problem. What has gone wrong?

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

ICal not Sync after Leopard upgrade

Since Lepard, iCal doesn't sync anymore with my iPod Touch nor with me.com
NB. Address, Videos, Music, Fotos and other things are working good. Only iCal calendars are NOT SYNC anymore!?
iCal is working fine in local on my iMac, I have 10 different calenders but only 2 are sync on iPod Touch!!
I have try everything possible: stop me.com sync; delete and reinstall iCal; force to delete and re-sync Calenders on IPod touch via iTunes. I have even asked for help to some experts in Apple Centers... no solutions
Please HELP

OK SOlution from MobileMe.com CHAT
http://www.apple.com/support/mobileme/mailchat/
I had to REST the LOGS of SYNC within the Preferences of the Utility iSync!!
After that everything was easy to set back to normal.
max

IPhone won't sync after iTunes Upgrade

I was prompted to upgrade to iTunes v8.1, which I did over the weekend. When trying to install it I get this error message:
“The software you are installing for this hardware:
DVD/CD-ROM drives
Has not passed Windows Logo testing to verify its compatibility with Windows XP … “
The install will then carry-on. When go into iTunes I get this error message:
“The registry settings used by the iTunes drivers for reporting and burning CD and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.”
(I had installed other CD burning software, but had deleted it before trying the upgrade). It will let me into iTunes, but when I plug my iphone in, it will charge it, but won’t sync. When I plug the phone in, my laptop does open a box asking me which camera software I want to use.
I’ve tried re-installing iTunes several times (including deleting ‘Apple Mobile Device’), but it hasn't made a difference. My laptop is Windows XP
Jedzi

Wasted hours on this. Solved it in the end & thought the solution might be useful for others. There were 2 problems:
1. The Gear software drivers were missing / incorrect. Had to re-install them. That didn't work straight away so I then had to edit a registry setting.
2. The iPhone still was only appearing as an imaging device, not under USB Controllers in Device Manager. I eventually found out that I had to reinstall the drivers. Couldn't find them at first. Finally found them in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
This all happened when I upgraded to iTunes v8.1.
Jedzi

Imprting cd tracks shuts my computer down after Itunes upgrade

Updated to the latest Itunes 6.5. Anytime I try to rip songs and add them to my playlist, it shuts my computer down. Was not a problem on previous version of Itunes. I've tried 10 different cds and each one does the same thing. Any suggestions, or anyone know how to download an older version of Itunes? I searched the site, but it keeps sending me to the download page for Itunes 6.5. Thanks

Sounds like some conflict in your system. Try going to the PC makers site, MANUALLY looking for updates to your model and downloading all updates they offer, especailly BIOs, chipset and firmware for the CD ROM.
I say to manually look because some PC makers have some kind of "Auto update" software on the PC or there web site and they usually can not pick up the BIOs and things like it so even if theres an update you need it won't show it
Do you get any flash of a blue screen with an error code when this happens?

Form responses/tracker. How to re-sync after OS upgrade?

Similar Messages

Maybe you are looking for