Email (mail form) response tracking in Campaign Management

Hi ,
There is a requirement in my project where we need to track the reponse of a campaign .
We are executing campaigns through mail forms which are being sent to a selected  target group.
We want  to track the number of people in the target group who have read the mail form and send a confirmation mail back to the sender.
Can it be done through PRCu2019s (Personal Response Codeu2019s ) or Repsonse Id's .
Could please guide  me  ?Any suggestions would be welcomed.
Regards,
Maroof

Hi Satish
Can you help me out with regard to redirection of URL as i am stuck with the same scenario as you explained in your answer, where i have to use Intermediate site option for sending links in email for the tracking for customers. I hvae done the config settings, it is works fine Internal nework, but i am not sure how i can do the re-direction of the URL. Can you please explain me
example:
I am sending email with following link
https://www.xxx.com/customersupply/xxx.html (External Link)
i need to re-direct to to our CRM system which is
http://hxxxx.com:8000/ (CRM System)
Thank you in advance
regards
shankar

Similar Messages

  • Campaign Code in Mail forms and Marketing Planner - Campaign

    Hi Experts,
    What is the purpose for campaign code field? How to generate this field value in Mail forms?
    Why it appears in marketing planner - campaign.
    Anybody please help.
    Thanks in Advance,
    Suvitha

    Hi Dipesh
    Thanks for your reply. I want to know how this campaign code is related to the product order number?
    Where you will specify which product you are offering discount?
    when u execute the campaign Campaign Code will be read from campaign. -- Can you explain me in detail this statement
    Thanks in advance
    Regards
    Suvitha

  • Mail form in SAP CRM campaign

    Hi Experts,
    I want to create a MailForm in CRM WebUI .It must be possible for receivers of emails regarding a campaign/event to automatically unsubscribe via e.g. a browser.
    I want to implement News Letter Functionality.
    Could you please suggest me how to do it?
    Thanks

    Hello Majid,
    Since you seem to be using CRM 2006s (CRM 5.1 / CRM 5.2) the easiest solution -- which is actually an out of the box solution -- is to use the ERMS Push functionality provided by SAP. With the ERMS Push solution you first send the emails from the third-party contact center software into the SAP SAPconnect interface (which ERMS uses) instead of into the SAP ICI interface (which real-time push emails normally use). Once inside ERMS you have a chance to use all of the standard functionality like auto-acknowledge and auto-prepare. Then instead of using ERMS to route the email to the Agent Inbox, you pass the email back to the third-party contact center software for routing. A special ERMS action called ERMS Push sends the email back to the ICI interface where it is pushed real time to an agent using the normal routing rules defined by your third-party conctact center software! Then the agent receives the email via real-time push just like normal. When the agent clicks reply in the Email Editor, the system automatically inserts the defined email template (standard response) as defined in the ERMS Auto Prepare action paramter and linked Category Modeler categorization!
    Currently I think only Genesys has implemented the ERMS Push interface. However, SAP BCM is also on the way to support this feature. And other vendors such as Avaya and others would also do so on request. Who is your vendor???
    Warm regards,
    John

  • Form responses/tracker. How to re-sync after OS upgrade?

    Hi,
    I'm using Adobe Acrobat 9 Pro Extended. About 10 days ago I distributed a form via acrobat.com and was receiving responses in the usual file *_responses.pdf.
    Since then I upgraded my XP x64 to Windows 7 x64, and reinstalled all software.
    Now tracker doesn't sync and my  *_responses.pdf, when I open it, doesn't show the answers I had already received for my questionaire.
    Not only can I not access the responses I had already received, but I can't figure out how to access any new ones people may send as a reply.
    I have entered my acrobat.com account in my reinstalled Adobe Acrobat 9 Pro Extended, but no change.
    Opening the resposes file shows it to be empty of replys.
    What can I do to at least access whatever responses people may be sending now?

    If I go on to the Apple TV and tell it to add a shared library, I see the aTV show up in my iTunes devices list so.........
    Not sure that should happen if the the primary library is linked properly, the itunes library can't be linked as a primary AND a secondary library. Perhaps your only option is to relink the library and the tv.
    (Please excuse my unsupported nomenclature)

  • Dynamic graphic in Mail forms

    Hi All,
    I have a mail form which has been created in transaction CRMD_EMAIL. I have been asked to enhance it with a dynamic graphic image.
    There will be uploaded 1 image pr customer in transaction SE78.
    And for each document I must find the corresponding image.
    In normal smartform I can choose between 'Fixed value' and 'Dynamic field value' for graphichs name. And I can see that it works when I create a global variabel eg. 'TESTNAME' and assign it the value '123456'. if I then enter &TESTNAME& as dynamic graphic name, and test print it works fine and prints graphical image 123456.
    But in with the mail forms in CRMD_EMAIL, this is not available. If I enter a variable the field disaperes and in test mode i get the error 'Graphic cannot be displayed' - This is identical to the error I get in smartforms if I enter a name that does not exist.
    Does anybody knows if this is possible to do in mail forms. Or if I can use the smartforms instead of the Mail forms when working with campaigns.
    Best regards
    Dennis Lybecker

    Hi Gregor,
    Thanks for your quick response.
    The document was ment to include a technical drawing regarding the specific installation for the customer/prospect.
    It looks like we are going to include this drawing in a different document, which should be created in smartform.
    If anybody come up with a way to do this - please let us all know.
    Best regards
    Dennis

  • Mails forms in Campaign Management

    Hi Experts,
    I need to create a new mail for for the camapaign management.
    I have created a new mail form for the campaign, using the Attributes, Address and BP NO
    In Campaign creation under the Channel, Communication is selected as Email and in the Form: my mail form is displaying. When I try to execute,Error : TREX is not configured.
    please let me know how to configure this mail forms in sap crm 7 in campaign mgt, or whether some steps has been missed out  by me.
    regards.
    karthik
    Edited by: Karthik J on Feb 19, 2012 12:20 PM
    Edited by: Karthik J on Feb 19, 2012 12:24 PM

    Hi Karthik,
    In case of HV segmentation, may be you can check whether the TREX settings are maintained for the object ID : BPARTNER
    Path :CRM ->Marketing->Segmentation->High Volume Segmentation ->Define RFC Destination and Settings for TREX Index
    Hope this helps to resolve the error.
    Regards,
    Rashmi

  • Hi Email Campaign Management without automation.

    Hi,
    I am working on Email Campaign management. Where we have created a survey ,Mail form, and a campaign. This Survey goes to the customer via email in form of URL.
    How we can capture the responses of the customer. Based on which leads can be created?
    Ability to capture survey response in CRM system without using Campaign automation Functionality ??
    I am looking for a solution without using the Campaign automation Functionality as it is out of scope of my project.
    Regards
    Rajiv Sharma

    Hi Rav,
    I would suggest that you start configuring SCOT as described in:
    <a href="/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface">Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface</a>
    Then you can go further on as described in the:
    <a href="http://help.sap.com/bp_crmv340/CRM_DE/BBLibrary/Documentation/C22_BB_ConfigGuide_EN_US.doc">Best Practice CRM Campaign Management - Configuration Guide</a>
    Regards
    Gregor

  • Campaign Response tracking

    Hi All,
    How can we track responses from an Email based survey campaign in CRM 7.0 campaing automation? 
    I am using Mail form to send a survey to an target group and would like to track the responce for all the BP's. We can do it using Response ID in mail form? If yes, what all setting / config we need to use response ID functionality?
    Thanks,
    Nitin

    Hi Nitin,
    Following are thesteps to track response for mail sent through a campaign,
    1. Generate URL for Survey and insert the Survey URL in Mail form.
    2. While inserting the Survey URL system gives you 3 option to select
         a. track via target site (used for URLs generated in SAP CRM)
         b. track via intermediate site (used for external URLs )
        c.  Without tracking. (if no tracking is required)
    3. Choose Option a. via target site to insert the Survey URL in mail form
    4. Assign the mail form and target group to a Campaign and execute.
    5. On getting response to Survey we can get response details through two standard reports Marketing Cotact List and Marketing Contact Summary based on the campaign.
    Regards
    Mallikarjun

  • Email Response Tracking

    Hello friends,
    I have a requirement to implement Email Response Tracking.
    When a email campaign is executed, I would like to see the response like how many people accessed the link, How many did buy the product using the link, How many people did not open the mail/did not open the link?
    I have come across Response Tracking. Please see the below link
    http://help.sap.com/saphelp_crm60/helpdata/en/2b/a85bd37c854cdebfaca00bcae6c4cb/frameset.htm
    I am little confused with the process like how to insert the PRC in the mail form?
    How the Implemetation of the Badi CRM_MKT_PRC_CONVERT will be called?
    Please share your ideas on how to achieve this, If any one of you have implemented this/have knowledge on this.
    Many Thanks,
    Srinivasu

    Hello experts,
    Can you please tell me how to use and get the details like how many people have actually opened the mails and how many are bounced using response ID and Response code. I can see the insert Response ID Response Code fields in the mail form Web UI.
    I need to work alone on this. We don't have a BW consultant. Guide me if there is any need for the BW configuration to make this work.
    Lets say that the number range has been created for the Response ID.
    Does the system automatically convert the Response ID to Alpha numeric form? or do we need to implement a BAdI?
    How will get to know how many people have opened the email in which the respose ID has been inserted?
    I have not found much details about the response tracking?
    If you can help me fix this, It would be of great help.
    Many Thanks,
    Srinivasu

  • How make ERMS mail form avail as a std response 7.0

    I have the mail form created in CIC Manager, in the ERMS email response  I can find the form in the search and insert it.
    I just want mail form to be in the std response so the agent does not have to do a search for it each time.
    Is this doable?
    I'm not trying to make it default in the email response automatically but just easier for the agent to find it without going to "More" and doing a search each time.

    Hi Glenn,
    You need to add the mailform ID to a so-called Standard Response Group (transaction CRMC_IC_RESPNGRPX) via IMG menu path: Customer Relationship Management - Interaction Center WebClient - Basic Functions - Communication Channels - Define Standard Response Groups. Its a bit screwy, you you need multiple line entries (with the same Std Response Group ID) for each mail form you want to add to a given profile.
    Then you have to add the Standard Response Group profile to your agent-facing Business Role obviously.
    Best regards,
    John

  • Mail Form In Campaign

    Hi,
    We are using CRM 7.0 (Marketing module).
    I have created Attribute Context for Mail Forms in the IMG and it is also appearing in the Web UI.
    Nothing is appearing in Attributes when I'm selecting "Insert Attributes".
    Could anyone provide me the configuration steps for creating Mail Form?
    Reply awaited.
    Regards,
    Sri...
    Edited by: Srinath Devarshetty on Jun 25, 2010 12:06 PM

    Hi Srinivas,
    I want to give some customer attributes to make the users able to insert them when they create mail forms.
    For example, I would like to proved the attributes like Current Service ticket ID, current IBSE reference etc.
    I read in SAP help and created a structure in SE11. then created attribute context ZSERVICE and added the created structure to it.
    But in WEB UI, when i am creating mail from and click on attribute button, I do not see ZSERVICE in the attribute category drop down. It always contains only following 5 option
    1, Business Partner
    2. Campaign
    3. System
    4.Marketing attributes
    5.Additional attributes ( this has no attributes in it )
    Could you please advice me on how to get custom attributes on mail forms ? I will be very much grateful to you as i am struggling a lot from last few days for this.
    Also, My requirement is nothing related to marketing or campaign management. This is generic to give all IC AGENT some custom attributes to add when they create mail forms as per their needs.
    Please advice.
    Thanks & Regards,
    Suchita

  • Accents donu00B4t appear in mail form (Mailing Campaigns)

    Hi Gurus,
    When we execute mailing campaigns there are some not common characters that don´t appear. These are characters with accent, €, ..., ñ, ...
    guía and the result in the customer mail is gua
    € and appears #
    ... and appears #
    ñ and appears nothing
    I´ve been cheching OSS in French, Russian... but without success because our language is Spanish
    Luis Angel Fernández

    Hi Luis,
    In the HTML code that you create in Personalized mail form you have to use entities instead of regular accents. (In the Personalized mail form click on the source and edit there directly).
    List of regular entities for various characters can be found here
    http://www.w3schools.com/tags/ref_entities.asp
    Also, please ensure that the system in which you are viewing email address supports UTF-8 characters. e.g. Eudora email clients do not support UTF-8 and you will continue to get problem of junk characters where you have special characters.
    Regards,
    Deepak

  • Links donu00B4t work in mail forms(Mailing Campaign)

    Hello,
    We have created some links in a mail form and when we execute the campaign, the
    link doesn´t navegate to the URL.
    The code is as follows:
    href="/exchweb/bin/redir.asp?URL=http://www.efeservicios.com
    It happens the same with a sound link, the page doesn´t load, and the defined code is as follows: 
    href="/exchweb/bin/redir.asp?URL=http://www.EFE.com/radio/mkt/copaamerica.asx
    Any solution??
    I´ll reward points!!
    Luis Angel Fernández
    CRM Consultant

    Sorry, the forum created links of my post automatically
    I meant to say:
    Hi,
    Normally, the HTML code should look like this:
    {a href="/exchweb/bin/redir.asp?URL=http://www.efeservicios.com">PUT YOUR DESCRIPTION OF THE LINK HERE</a}
    CHANGE the { to an < and the } to an >
    If your link should point to http://www.efeservicios.com, it should be:
    {a href="http://www.efeservicios.com">PUT YOUR DESCRIPTION OF THE LINK HERE</a}
    again, CHANGE the { to an < and the } to an >
    Hope this helps!
    Jeroen

  • Multi line values in mail forms to send emails

    Hi All,
    Ours is CRM 2007 application, as part of new capability adding to the system, we need to send email to customer with few details once service tickets saved in the system. we decided to use mail forms to create the template and send email to the customer with details. as part of this we need to send multi line values as well in the mail form - email as shown below. example field here is for working hours of the customer office.
    Saturday - Sunday 10am - 4pm
    Saturday - Sunday 10am - 4pm
    (excluding public holidays)
    Can some body tell me how to send the multiline values using mail forms - emails to customers. right now we receive the last line. I dont see any help in mail form documetation as well on this.
    I appreciate any help in this if you already have some solution.
    Regards,
    Srinivas

    Hi,
    Are you using below any FM to send mail ?
    1. CRM_IM_EMAIL_CREATE_SEND_40 2. CRM_IM_EMAIL_CREATE_SEND_51
    if so, then inside this FM there will be call to BADI CRM_IM_ADD_DATA_BADI . This badi will get the data for custom/additional attribute values. Basically it will get one value ( last value ).
    What u might need to do is after this badi call u need to loop ur values and set it . For doing that u might need to make this FM tocustomer name space or look for implicit enhancements.
    We have done similarly for sending mail duringcampaign execution. That was done in different place.
    hope it might help you to analyse more.
    Regards
    Sandeep

  • Campaign File Export via Mail Form

    Hi,
    I created a Mail Form, which is used to export campaign data in case Open Channel is used.
    So a file containing the selected business partners is created after campaign execution and attached to the campaign. When opening this file, the column headers appear like this:
    BAPIBUS1006_HEAD-BPARTNER
    BAPIBUS1006_CENTRAL_ORGAN-NAME1
    and so on
    Does anyone know how I can get rid of the BAPIBUS1006_HEAD- or BAPIBUS1006_CENTRAL_ORGAN- part? I just want to show meaningful columnnames, like BPARTNER and NAME1.
    This concerns CRM 5.0 and CRM 5.2
    Regards,
    Jeroen

    Hi,
    Have you copied this formular from another client/system? Then I know it will not work since I did the same. You have to create the formular again in the system you are working and check then.
    From the campaign, choose test comm. chanel and check in the ringt corner whether it says badi*something. If it does not, create a new formular.
    Regards Camilla

Maybe you are looking for