Format of line above split footnote
hi, i have formatted footnotes in my document the way that footnotes start below a 0,5pt line which is of the same width as the text frame. but with long footnotes which must be split the problem is that i can't apply the same format to the line above the footnote which is split, the line is formatted automatically as a 1pt line with a length about three fifths of the the witdth of the text frame. how can i apply the same fotmat to all lines above footnotes?
thanks
Does the paragraph style you have set for your footnotes have a paragraph rule applied to it? You can see this in the Paragraph Style Options panel under "Paragraph Rules"
Similar Messages
-
How to remove the lines above and below header in sqlplus report
I run a sql*plus report whch i want to be outputted to XLS file. But the format is not matching. I am using data->texttocolumns feature of excel , which is manual .
As the headers are coming dynamically from query . i CAN NOT set header off.
So first of all ,
I want to get rid of the first blank line above the hearder.
i want to get rid of the dotted line below header .Hi,
You are not being clear here,
As the headers are coming dynamically from query . i CAN NOT set header off. You are saying that you have SQL*Plus script but can't use the SET command?
Besides, that I thing you want SET PAGES 0, instead of SET HEADER OFF.
If you could paste your SQL*Plus script here (Perhaps replacing the actual query with a very simple one, then perhaps we can help.
Regards
Peter -
Line item split in FF_5 before posting based on business transcation type
Hi,
I have a requirement where in while executing FF_5 with BAI format, I have to split line items and post different documents for specific business transaction type. Please provide your inputs to achieve,if it is possible.
Regards
HariHi,
I have searched forum but did not get any appropriate solution. Please provide your inputs for this requirement. -
Lines above and below the total values
Hi All,
This is for an invoice. I display line items and then the totals. I want to draw lines above and below the total values. i am able to underline the total values using the paragraph formats but that will give only lines below the values. how can I get the lines above and below the values in correct proportions? Please give me some ideas on how to do this.
Thank you,
Prathima.Prathima,
You should not be using ULINE and VLINE commands here. Instead you have to declare boxes.
/: BOX FRAME 10 TW
/: BOX XPOS '3.0' CM WIDTH 0 TW FRAME 10 TW
/: BOX XPOS '6.0' CM WIDTH 0 TW FRAME 10 TW
/: BOX XPOS '9.0' CM WIDTH 0 TW FRAME 10 TW
/: BOX XPOS '12.0' CM WIDTH 0 TW FRAME 10 TW
Using boxes is advantageous in a lot of ways as you can specify the x and y positions exactly.
Thanks
Aneesh. -
Regarding the color of the line of the footnote
Hi I'm using pages 09, - love it!
I'm currently doing a major repport, in where I need to have a specific coloscheme. It works quite well in all aspects, except regaring the black line that occurs when I put in a foot note. So my problem is, how can I change the color of the standardized black line?
Just to sum i up, I have no problem whatsoever of drawing a line in my colorscheme it's only regarding the black line which seperates your acctual text from your foot notes.
Looking forward to hear from you all,
regards
DenmarkCThere isn't any setting regarding the footnote line. What you can do is use a line shape and position it above the footnote line. Copy it and past it on the next page with a footnote and so forth.
-
Read line and split into different fields
I have a flat file with space (multiple spaces between different fields) as a delimiter. The problem is, file is coming from 3rd party and they don't want to change the separator as comma or tab delimited CSV file. I have to load data in ODS (BW 3x).
Now I am thinking to load line by line and then split data into different objects in Transfer rules.
The Records looks like:
*009785499 BC 2988 244 772 200
*000000033 AB 0 0 0 0
*000004533 EE 8 3 2 4
Now I want data to split like:
Field1 = 009785499
Field2 = BC
Field3 = 2988
Field4 = 244
Field5 = 772
Field6 = 200
After 1st line load, go to 2nd line and split the data as above and so on. Could you help me with the code pleaseu2026?
Is it a good design to load data? Any other idea?
Thanks.Hi Mau,
First capture the data into the internal table (say itab).
Loop at itab.
it_final-field1 = itab+1(9).
it_final-field2 = itab+12(2).
it_final-field1 = itab+16(4).
it_final-field1 = itab+21(3).
it_final-field1 = itab+25(3).
it_final-field1 = itab+29(3).
Append it_final.
Endloop.
&*********** Reward Point if helpful**********& -
How do I get it so after initially importing my video the line above the time line will be green instead of red. It stays red until after I render the whole clip. I am importing my video clips from my camcorder. How do you determine the correct project settings if that is the issue?
Thanksfreedog69
How do I get it so after initially importing my video the line above the
time line will be green instead of red.
Not possible as worded. If you have the correct project preset, there will
be no colored line over this Timeline content.
If you do not have the correct project preset, there will be a red line
over this Timeline content.
What version of Premiere Elements are you using and on what computer
operating system is it running? APE 8 Windows XP 3GB of ram Pentium Dual core
Proc 2.41 Ghz
If you are talking "red" line, then you must be working with a version of
Premiere Elements earlier than 11. Assuming that....
If your project preset matches the properties of your source media, then,
when you bring one of those files to the Timeline, you will get no colored
line over the Timeline. But, after that, after you edit that content, a red
line will appear. That is when you render the Timeline content to turn the
line green.Thereafter, that original content will never revert to the no
colored line status as you work through editing that project. It will just go
through the red green color indicator system.
No colored line and green = the program telling you that you now have the
best possible preview of the Timeline content when viewing it in the Edit
Mode monitor playback. Red line = the program telling you that you do not
have the best possible preview of the Timeline content and, if you want that,
then you can press the Enter key of the computer main keyboard to make that
happen.
What are the properites of your source media... Canon HF 10 camera and
Panasonic HV-720
video and audio compression
frame size
frame size
interlaced or progressive
file extension
pixel aspect ratio
General Panasonic HV-720
ID : 1 (0x1)
Complete name : K:\Busters_Tap\New
Matches-CamB\f0069412.m2ts
Format : BDAV
Format/Info : Blu-ray Video
File size : 2.00 GiB
Duration : 58mn 59s
Overall bit rate : 4 854 Kbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=1, N=30
Codec ID : 27
Duration : 58mn 59s
Bit rate mode : Variable
Bit rate : 4 267 Kbps
Maximum bit rate : 16.8 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.069
Stream size : 1.76 GiB (88%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 58mn 59s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -558ms
Stream size : 162 MiB (8%)
Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Duration : 58mn 58s
Delay relative to video : 34ms
General- Canon HF 10
ID : 0 (0x0)
Complete name : K:\Busters_Tap\New Matches
CAM-A\00001.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 1.90 GiB
Duration : 49mn 5s
Overall bit rate : 5 551 Kbps
Maximum Overall bit rate : 13.7 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected] (mailto:[email protected])
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Codec ID : 27
Duration : 49mn 5s
Bit rate mode : Variable
Bit rate : 5 066 Kbps
Maximum bit rate : 12.0 Mbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.109
Stream size : 1.74 GiB (91%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Codec ID : 129
Duration : 49mn 5s
Bit rate mode : Constant
Bit rate : 256 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : -66ms
Stream size : 89.9 MiB (5%)
What brand/model/settings camera provided you will the source media for the
Premiere Elements 10 project. Canon HF 10 and Panasonic HV-720
In a message dated 1/9/2014 5:00:15 P.M. Eastern Standard Time,
[email protected] writes:
Re: Red line above the time line
created by A.T. Romano (http://forums.adobe.com/people/A.T.+Romano) in
Premiere Elements - View the full discussion
(http://forums.adobe.com/message/5998225#5998225) -
I'm working with InDesign CS6, Windows 7.
Is there a way, using paragraph rules, to create a heading with shading behind the text and thin lines above and below the text?
I'd like to create headings that look like these:
Thank you!I have a document where I almost do such, but without the fill. I use a Head Style which Spans Columns for this instance; it allows the haeds to flow and fill the width.
Paragraph Rules above and below are turned on with plenty of offset.
I tweaked my setting to accomodate your need - It required only one instance, not above and below, and changing the stroke to a double stroke.
It may be necessary to create a custom stroke to modify the proportion of stroke vs fill. There is a difference of thin-thin and thick-thick, neither of which seemed perfect but might be dependent on the Character height.
Creating custom strokes is accomplished via the Strokes Panel. -
Sequence clip with red line above
I imported several clips from a Nikon D300s camera into PP, and put on a sequence timeline. 4 show the yellow line above, indicating matching settings, but 2 show red lines, and I don't know what is different. All were done at the same time, and shouldn't have any different settings, to not match like the others. What could be the reason?
Originally, I created the sequence by matching the camera settings, and then imported all the video clips. that's why I don't know why 4 would have yellow lines and 2 red, since they were all from the same source camera and day. All had been put on one sequence.
After finding I could have separate sequences within a project, today, I dragged the original, untrimmed AVI files to the new sequence box so they would match for sure, and then I copied and pasted the same (but trimmed) file to this sequence, so each of the 6 has its own sequence. Still the 2 have the red line. I didn't find any effects to clear either. -
VA05 report exectution Excel format few line items gets automatically skip
Dear,
SAP support Team & Other team Members On SDN.
As we are generating report from VA05 screen for retail sales order list, the report shows full required data but when the report is executed in Excel format few line items gets automatically skipped & further tried generated in TXT format the whole report get properly dragged.
This problem is only in PRD Server, when i am teting the same in DEV Server it is properly Generated in EXCEL with Proper LINE ITEMS.
Please kindly provide me with some Solution regarding the same.
Warm Regards,
Mohammed Hassan Naveed
Deputy SAP Basis ConsultantHi,
Have you tried using VA05N? -
Line item split - open item clearing (FB05)
Hi,
when clearing open items we need to preserve the line item split in clearing document as it was in cleared items. For example if we have two line items with different assignment (ZUONR) system generates only one line item in the clearing document (where amount is equal to sum of amounts from both cleared items). We need one item per assignment in clearing document. Thanks for any suggestions.
Regards,
Michal MajerHi,
You can always go to the "Analysis" button in the Condition Tab of the Particular Line Item and see what has exactly happenned.
Now to understand your setting.... Was that Manual Condition Type .. A Header Condition ....In process... Once you enter a value in the Header Level automatically it will be transfered to the Line Items in the document ???
Regards -
Unable to bold a cell verticle line in Cross-tab Format Grid Lines
Hi
I am unable to bold a random Cell vertical line inside the cross-tab. My cross-tab is having access database which pulls every data correctly,
To elaborate , here is the images to make it clear.
First one is the current output of cross-tab & 2nd one is the desired output :
To make it more clear ,
I am giving the screenshot of Format grid lines option, when I have selected Cell vertical lines , I can change Line options (Like style,width,color) from it. When I change it, it changes all three lines simultaneously. But, in that, I just want to bold only the last line of this grid.
The screenshot as follows (To denote the lines, I have put numbering under the vertical lines, where I want to bold only the third one) :
Please let me know, if any solution to this. I m using CRVS_13.
Thanks in Advance.Hi,
try to do this way..
Right click on crosstab - > crosstab expert -> customize style -> select your particular column then goto Format Grid Lines -> select your particular one based view -> ok..
I hope this not yet possible because select 1 automatically 2,3 vertical lines are selected..
See how it works......Please update ASAP
tHANKS,
dj -
Hi,
In my order we have the process where th line items splits automatically when there is no enough stock.
The issue is we have manual condition type value from the first item is not copied to the second item after split.
Please help to find out where in settings do i need to check to find out why manual price is not copied.
ThanksHi,
You can always go to the "Analysis" button in the Condition Tab of the Particular Line Item and see what has exactly happenned.
Now to understand your setting.... Was that Manual Condition Type .. A Header Condition ....In process... Once you enter a value in the Header Level automatically it will be transfered to the Line Items in the document ???
Regards -
How can I adjust the space between the dividing line of the footnotes and the continuous text?
How can I adjust the space between the dividing line of the footnotes and the continuous text?
I want to extend the space so the dividing line does not stuck to the normal (continuous) text in my thesis. Do you have a solution? That would be perfect. Thanks a lot!
-
[SOLVED] WARNING: bad format of line 333654 of /etc/fstab
Hi everyone,
I know that there are couple of topics concerning my problem but non of them was helpful, because my computer doesn't even boot.
Here's how it started:
I was trying to mount a game for the first time and something went wrong. I got message in terminal saying: the file couldn't be found in /etc/fstab so I pasted the iso image in /etc/fstab. I quit trying to mount and changed the appearance of my desktop (changed the theme, wallpaper the size of the folders etc.) and restarted the computer. When the booting started everything was normal until the message WARNING: bad format of line 333654 of /etc/fstab showed up it started to go on and on and on - the same message with different numbers and it doesn't stop.
What should I do?
I've tried to use my apple laptop to go to my linux Arch pc but I get the message "Host is down"
I also have a Kubuntu 9.10 i386 cd.
I really don't want to re-install. I thought maybe there is a way to somehow get to /etc/fstab and delete the file I pasted.
p.s
I am new in Linux and Arch linux, I am still trying things and often do something silly that I have to find a way to fix
Last edited by Encho (2011-02-27 15:01:42)/etc/fstab exists to be a file system table. It does not and indeed should not contain the contents of an image file such as an ISO. Disk images contain filesystems themselves, so the most you would need to put in /etc/fstab to mount them at boot is a line describing where the image sits and at what place in the filesystem it should be mounted.
That message about not being able to find it in /etc/fstab appeared because you either didn't specify a mount point for the image or the specified mount point did not exist. But, first, you will need a live CD of some sort to fix your boot issue. You could use the Arch installation live CD to do it—I recommend it. Whatever you choose, you need to mount your root partition and edit <mountpoint>/etc/fstab. If you need to figure out what your root partition's name is in /dev/, type blkid. For example, on my system I would do something like this from the live cd to mount my root partition:
# blkid
/dev/sdb1: UUID="06f29dbd-8ce8-4d98-82ee-9e84b7d44758" TYPE="ext2"
/dev/sdb2: UUID="3747c62b-2be0-415e-bdba-58ca44a67f6d" TYPE="swap"
/dev/sdb3: LABEL="roothome" UUID="50f8625e-3eeb-4578-9229-e7030bd2a082" TYPE="ext4"
/dev/sda1: UUID="7CAC3BEAAC3B9D98" TYPE="ntfs" LABEL="System Reserved"
/dev/sda2: LABEL="halite_windows" UUID="92863FB7863F9AA5" TYPE="ntfs"
/dev/sdc1: LABEL="citrine" UUID="35987e49-a4e7-4c5f-81cb-1a4e87373ecc" TYPE="ext4"
# mkdir /mnt/roothome
# mount -t ext4 /dev/sdb3 /mnt/roothome
# vim /mnt/roothome/etc/fstab # to edit the fstab
Once chrooted, edit the /etc/fstab file with your favorite console editor, e.g. vim, nano, emacs, and remove all the stuff you pasted in. It might be helpful to copy the first 20-30 lines of the file – that should be about all your fstab should need – truncate it, and then add the mounts that you copied. (Indeed, it should be possible to use sed or another utility to truncate the file after the last line of the fstab, before the data image begins.)
In the future, if you see a message about not being able to find the file in /etc/fstab, create a mountpoint for it:
# mkdir /mnt/iso
# mount -t iso9660 image.iso /mnt/iso/
Last edited by Snowknight (2011-02-27 15:51:20)
Maybe you are looking for
-
I have seen several posts about problems with the proximity sensor for the 3G. I am finding it works some of the time, but a lot of the time it doesn't, particularly if I an cradling the phone with my neck to my shoulder. This happens even with no ca
-
Where are mail attachments stored?
On my Macbook Pro all attachments are available to be opened when I'm not connected to the internet. I assumed this was true with ipad but could not open attachments on plane yesterday. So, I assume in ipad attachments are stored on server (I use mob
-
Derivation for retraction?
Hi gurus, How can I set derivation for data migration from BW to R/3 (retraction)? I am transfering plan data using FMCYCOPI_BW, but I need derivation for this data. When I use fmbprri for set derivation that does not work. Thank you Gennady
-
MOSS 2007 : Personal Document Library Permissions gone automatically
Hi All, I am using SharePoint version moss 2007. But yesterday permissions for personal document library has disappears and all other users not able to access their folders from same library then I had go back and given permissions manually. Can anyo
-
Itunes audiobooks won't "synch all"
I have many audiobooks (43) all purchased from iTunes, on my iTunes. But only the same 12 will synch to my iPod nanos--both my old old one and my brand new one--7th generation. I have plenty of memory--11.4 GB left on the iPod. Any suggestions? Than