Free case issue - very limited info of cases :(

Very limited info/spec/images are available for various cases for iPhone 4. It is pathetic that companies don't bother to publish more info when they are reaping millions by selling their cases. It wouldn't take more than an hour to publish more info online. Unhappy with this lethargic behaviour.
I guess Apple should pressurize some of these companies.
If any one can give info/inside story/pics/review about following, it would be great!!
1 Incase smoke & clear - Does smoke have plastic material or rubber? What about scratches?
2 belkin shield micra (except that single image which keeps floating everywhere)
3 Griffin motif diamond/smoke - has anyone used it?
Pixelskin HD has very good videos on youtube and hence so many people might have opted for it.

The MimeMessage constructor you're using needs to copy the entire message from the server. It uses the Message.writeTo method, writing the message content into a pipe that is read by the constructor. It was a bug in previous releases that the writeTo method wasn't fetching the data in chunks, as it does in other cases. Setting partialfetch=false will revert to the old behavior for writeTo, and for all other accesses of the message content.
It looks like both 1.4.4 and 1.5.1 are fetching the message content using a single FETCH command when you set partialfetch=false, according to your message. If they're both sending the same commands to the server, I can't explain why it would be fast in one case and slow in the other.
I did similar testing using my Exchange 2010 server. Fetching a similar size message took less than 20 seconds. Setting partialfetch=false brought it down to less than 5 seconds. Something's clearly wrong in your environment, but I don't know what.
Finally, I'm sure you understand that you only need to use that MimeMessage copy constructor in special circumstances, and you should probably avoid using it unless it's absolutely necessary. Even in the best case it's wasting time and memory.

Similar Messages

Free cases issue + question

I just watched the PC, and Steve said that we would receive free cases. He said that next week Apple would have a site up that allowed you to choose which case you wanted to get for free. Bumpers aren't the only ones that are being given away. There will be some other cases from other brands that will be available. This is due to the factory not being able to produce the bumpers quickly enough.
Hope that clears up some questions.
Here's a question of my own. Will we be able to input, say, an order number and be able to register for a case and have them send the case together with the phone or will we have to register after the phone is sent?

Thanks for the info!! The cheap (|) case I have does not work very well as it
comes off every time, but it works great as I haven't had too many dropped calls. Funny thing is most of my dropped calls is because I am in part of a crappy area for AT&T.

Case flaw - Very Disappointed by Apple Technicians at Apple Retail Store

IIn the last month I have purchased approximately $12,000 worth of Apple computers all with AppleCare.
Among them is an Apple MacBook Pro 15" Glossy (S/N: RM8193*** <Edited by Moderator>), which is the subject of this posting. When it arrived I felt that the bottom half its case was mildly flawed. To be precise:
i) The left speaker grill is slightly bubbled;
ii) There is a more than acceptable gap between the keyboard bezel just left of the left speaker grill and the bottom case;
iii) All visible case screws (4 on the left, 4 on the right, 2 on the back, and 4 on the bottom) are counter-screwed rather than flush. In addition, the screw heads look slightly indented, in my opinion due to a bad screwdriver.
This MacBook Pro was ordered on May 11, 2008 and was delivered on May 15, 2008. I reported the flaws and my concerns to AppleCare via telephone on May 19, 2008. The support representative apologized for my inconvenience and told me that he could set up an appointment for me to go to the store to see an Apple Genius. I told him I was unable to go immediately but perhaps next week. He further, advised me that I have AppleCare until May 2011 and that I could logon to the Apple website to setup an appointment.
Anyhow, yesterday (June 15, 2008) I went to the Apple retail store at Alderwood Mall in Lynnwood (WA) and spoke to a technician, Jared, who told me that since I bought a refurbished MAcBook Pro (directly from Apple, might I add) there are going to be some flaws. Now if I had known about this in the very beginning, I probably would have spent another few hundred dollars to buy a brand new computer or might have insisted on exchanging back on May 19, when I discovered the flaws.
Hearing Jared made me a bit upset and I asked to see his supervisor. Lead Technician, Steven, came out inspected my MacBook Pro and told me that he believes that in his opinion everything looks within tolerance; though he agreed that the screws are slightly sunk-in (over-tightened). However, he declined to fix it stating that this is not a functional problem and more so an aesthetic issue. In my opinion, Apple products have a lot to do with aesthetics. If I wanted a functional notebook with low quality control I would have purchased Dells.
For my (your customer’s) satisfaction, I need you guys to replace the bottom case, the keyboard bezel and all case screws.
Hope to hear from you folks soon. It is a clear issue of Quality Control & Customer Relations.
Thank you!
Message was edited by: Omer (WA)

Hi Omer;
You are NOT talk to Apple here. You are talking to other users just like yourself. So there is absolutely nothing we can do for you. I would suggest you call Applecare and ask to speak to Customer Support. They might be able to help you with your problem.
Allan

The hardest forum ive entered, and no remedy for the problem. where are my films ive paid for?? sorry for lack of upper case, just very angry with YOU apple

the hardest forum ive entered, and no remedy for the problem. where are my films ive paid for?? sorry for lack of upper case, just very angry with YOU apple

We are all itunes users just like you.
No idea where your films are as you provide no information at all about your situation.
If you want, help, then please explain your issue.

'Unable to connect' the number of free accounts can be enabled on this case has been reached

hello ! please someone help me
when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please

hello ! please someone help me
when i sign in icould ...'Unable to connect' the number of free accounts can be enabled on this case has been reached' heelp please
iPhone 5s, iOS 7.1.1

DVD Case Issue

I posted an issue concerning a new Macbook Pro I purchased the week before last and Apple have removed the post from this forum claiming it was not of a technical nature. I advised people to check their new Macbook Pro 17" under the area of the DVD as I found the lower case indented. I have had two occassions now where the DVD has not ejected but can here a noise which sounds likes its trying an meeting resistance. Apple service advised me yesterday the lower metal case is not covered by warranty and yet from a techincal standpoint the indentation may be causing the DVD intermitent problem. As this is a "fit to use" technical issue I think it is appropriate to be highlighted in the forum and perhaps someone can help by suggesting another way I can determine if the DVD is having an issue. I think Apple do not want the lack of claim on the lower case to be public knowledge. The Apple service centre stated they cannot help me even though I purchased the laptop just recently. So perhaps there is another technical solution to sorting out the DVD problem and manufacturing case issue?
Message was edited by: Host

They don't come with dented cases, so who dented it? You must have. I can see a dent near the slot affecting its performance. Buy an external firewire DVD drive and gain a ton of speed and save a ton of money vs. the repair which they rightfully say you are responsible for.

How do I move my large iTunes collection from a case-sensitive hard drive to a case-insensitive hard drive?

I currently keep my iTunes media on an external hard drive because it takes up too much space on my machine. I recently discovered that it was formatted as case-sensitive when I bought it, and now months later I'm having issues. When attempting to back up my files on a case-insensitive hard drive, the operation failed due to conflicting file/folder names (Artist and artist are now considered the same file name and one would have to overwrite the other). I now have a large iTunes file collection that is stuck on the case-sensitive hard drive, and I want to save a backup on a case-insensitive drive.
Is there a way to identify all cases where multiple files/folders have the same title/album/artist but different spelling so there will be no conflicts? The folder/file names would have to be crossed referenced to highlight any cases where File/fiLe/file would cause a problem.
I imagine there is a way to do this using iTunes script or Automator or a command in terminal or something rather than going through and checking/fixing all the information for thousands of songs by hand. I'm at the limits of my minimal development skills, so any help would be appreciated.

You should be able to use either "Carbon Copy Cloner" or "SuperDuper" (free for this purpose) to copy your case-sensitive volume to an empty case-insensitive one. Make at least two such copies on different drives. One is not enough to be safe.
If there are any name conflicts—that is, files in the same folder with names that differ only in case, such as "File" and "file"—then you will either get an error or one of the files won't be copied. You must ensure either that no such conflicts exist, or that the consequences are not important. How you do that is up to you. Unless you went out of your way to create conflicts, they probably don't exist.
Then erase the source volume in Disk Utility as case-insensitive. This action will remove all data from the volume.
Restore from one of your backups using the same application you used to create it, or use the "Restore" feature of Disk Utility, which will be faster. Search its built-in help for the term "duplicate" if you need instructions.

Free busy issue outlook 2010

I am sorry if i am posting this in the wrong place.
We have exchange 2010 sp3 in 3 sites ( US , UK and Africa)
Users in UK start complaining they are not able to See free busy of US users but can see free busy of UK and African users.
We later identified this could be due to the more no of groups which result in increased token size, so we removed 1 users couple of group membership and he was able to see free busy of other users in US.
Then we have done a registry change in all CAS server to set MAX token zize
Create the following registry keys on all CAS servers ( Exchange Server 2010 SP1 CAS servers) in the Active Directory site:
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value data: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value date: 16777216
But now users start complaining that they now cant see free busy of africa and US users, This affected only 5 users and all user outlook 2010.
P.S: No luck with OWA also for these users.
Please suggest.

First check free busy issue does exist in OWA, if its not affected in OWA and only in outlook follow
steps below
have you tried with start--> run --> "Outlook.exe /cleanfreebusy" switch
try the below step also.
Start Outlook.
Hold down the Ctrl key, right-click the Outlook icon in the notification area, and then click
Test E-mail AutoConfiguration.
Verify that the correct email address is in the
E-mail Address box.
In the
Test E-mail AutoConfiguration window, click to clear
the Use Guessmart check box and the
Secure Guessmart Authentication
check box.
Click to select the
Use AutoDiscover check box, and then click
Test.
Check auto configuration test reports
4.
Try to change outlook profile of affected users
Check in Tools--->Options and Delegates tab if there is any other account try to remove.
Close issue as you have
http://social.technet.microsoft.com/Forums/exchange/en-US/c01aa88e-ee4a-4187-9686-ab3494eb181b/single-user-cannot-view-freebusy-or-open-automatic-replies-ooo
follow the article: http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
also I suggest you to remove cached exchange mode.
Moved the mailbox to another database

Airport Utility 6.0 where are Printers settings? Disks settings are very limited.

After update to Airport Utility v.6.0 on my Airport Extreme I found that new versions has no Printers settings at all. I can see my printer on my Macs as well I can manage it from another Mac having older Airport Utility version, but not from a new one....
Additionally, new Airport Utility version has very limited settings for managing disks connected to it.
I even, at the beginning, was thinking that it put Airport Express firmware to my Extreme.
Firmare update works fine. An update on Express was not smooth, as it lost conncectivity with my Extreme, but after reset it - I got it back (the upgrade changed network name that an Express is talking to an Extreme by removing brackets from its wifi name)

My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
~~~~~~~~~~~~~~
I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer.
1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
http://support.apple.com/kb/DL1483
2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
"Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
3) The HELP has some WRONG information. Here we go:
3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
"An error occurred while updating the firmware. -6721"
Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
6) Miscellaneous changes in Airport Utility 6:
6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
6d) MAC address filtering for Airport devices is GONE.
6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
/System/Library/CoreServices/W-Fi Diagnostics
6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
--> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

Case management: Partner confirmation and subsequent case creation

Hi,
When i confirm a partner and then click case, the partner number does NOT reflect when the case details open. Is this the standard functionality or am I missing to activate or configure something here. For instance when i create a lead, the partner confirmed before gets automatically reflected in the lead details. In this issue of case, I am right now manually adding the partner. Please clarify on this.
My second query is about triggering an action (mail) to the related partner when i 'save' the case. Any input here would be appreciated.
Thank You,
Amar.

Hello Amar,
I'm afraid that I can't add much additional value here. For your second point about emails I would normally suggest OneOrder PPF (Post Processing Framework) actions. But I assume that these only work in One Order documents and not for the case. Perhaps someone else can confirm?
And I am not aware of any additional enhancements to Case Management, except for some Investigate Case Management functionality rolled out in CRM 7.0 targeted at the public sector (e.g., government and law enformance agencies). My recommendation would be to look at the new IT-IL based Incident/Service Request IT Service Management functionality available in CRM 7.0 which provides a lot more power and flexibility than the old Case Management (or Service Ticket) functionality.
Best regards,
John

I HAVE ADOBE PREMIERE ELEMENTS 10. I used to have many options on the "Disc Menu" to set up my DVD.. and now it is very limited..almost no templates. I try to sign in to my account through Premiere and it will never sign on. Anyone have any thoughts??

I HAVE ADOBE PREMIERE ELEMENTS 10.
Problem #1 I used to have many options on the "Disc Menu" to set up my DVD.. and now it is very limited..almost no templates.
Problem #2 I try to sign in to my account through Premiere and it will never sign on...just keeps acting like its trying to but never connects. Anyone have any thoughts??

JEN-E-FER-FER
With versions earlier than 11, there is no more Sign In. If you get any message to that effect, ignore and cancel out of them. You should be able to move forward to your import, editing, and exports using the program nonetheless.
As for the disc menus, those marked photoshop.com plus members only are no longer available to you in versions of Premiere Elements earlier than 11. You may see the thumbnails for those members only items, but they are no longer available to you in Premiere Elements earlier than 10.
Interestingly, many of them are found in Premiere Elements 11, 12, and 13 as part of the program with no need to purchase them or have any special membership in anything. Adobe has promoted Adobe Revel as a replacement for photoshop.com, but that has no impact on this disc menus issue.
This all has to do with Adobe discontinuing photoshop.com and photoshop.com plus et al.
If you need to download regular disc menus for Premiere Elements 10, please review the following
ATR Premiere Elements Troubleshooting: PE 7, 8, 9,10: Content Download
Bottom lines:
1. No more Sign In for Premiere Elements 10
2. No access to photoshop.com plus (members only) disc menus
Any questions or need clarification on anything written, please do not hesitate to ask.
Thank you.
ATR

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

HT1311 I live in Indonesia and the iTunes store is very limited . Can i use the australian store with my current iTunes log in ?

Hi , Ilive in Bali Indonesia and my online itunes account is very limited .. How can i keep my apple id and use a different countries store to buy music etc ?

You can only buy content from your own country's store - to be able to buy from the Australian store you need a valid billing address in Australia and be in Australia when buying from it. Do you have access to other music purchase download sites ?

Free goods issue field to add in KE30 report

Dear All,
I need to add one colum under the lead column FREE GOODS ISSUE in KE30 report.
In current report product wise sales report is like below in KE30.
Lead Column                                     amount
Gross Sales Valume                               6
Gross Sales Vlue                                 1100
Sales Return                                             0
Freight/surcharge                                     50
Rebates Accruals                                      0
Net Sales                                              1050
Total Cogs sd                                      1534
Other Income &Exps                                 160
Here i need to add the field FEE GOODS ISSUE next to Sales Return colum.
Pls help me on this.
Best Regards,
Venkat.

dsgsd

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Free case issue - very limited info of cases :(

Similar Messages

Maybe you are looking for