Free Goods Automatically triggered in PO

Dear all SAP experts,
I want to handle the free goods in PO. First, I have set the exclusive free goods through MBN1 for specified vendor & material and its normal gross price condition.
Just say BUY every 10 pc of Material A can get 1 pc of material B. And the min. purchasing qty for material A is 10 pc.
However, during PO creation, there is no new item(material B) pop up when I input the material A in 10 pc. ? WHY?
Do I miss some configuration steps??
Do I need to create a new condition type NR00 and assign it to calculation schema RM0002? I have tried but it is not working...
Thanks in advance for any reply.

Hello Boris,
You can achieve this with Inforeord maintainence (ME12).
Follow the steps:
- Go to ME12
- Give the Vendor and material combination'
- Go for condition data
- Select the validity range
- Click on "Gift box" icon, and execute the transaction
- it will give you the list where you can maintain the base material and the free goods material number in "Free goods" column
Hope this helps.
Regards
Arif Mansuri

Similar Messages

Free Goods - Not showing in sales order as subsequent item

Dear Gurus,
I have created a Free Goods procedure determination and maintained it at Customer/ Material level in VBN01.
The procedure is inclusive as follow:
For every 100 units purchased, the customer gets 10 units free
However at sales order level there is no indication at all that the Free Goods are being triggered.
When I check the pricing procedure, the condition record NA00 that I have used doesn't show-up.
There is no subsequent item in the sales order under the main item showing the Free-Goods discount.
Could you please help me go through the customizing process to correct the error?
Many thanks for your help
Chris

Hi,
FYI
Free goods can be configured in SAP by following two methods.
(1) Manually
(2) Automatically
Manually: By specifying higher level item category for a line item we can determine free goods as a free of charge
items during sales order processing.
Automatically: System proposes free of goods automatically in the sales order. In automatic free goods
configuration system follows two methods.
(1) Exclusive
(2) Inclusive
Exclusive: System configures free goods in exclusive option like free goods quantity is going to be excluded in
order quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 10 + 1.
Inclusive: System configures free goods in inclusive option like free goods quantity is going to be included in order
quantity. Ex: For 10 items 1 item is free. Then system configures free goods as 9 + 1.
NOTE: In exclusive method other items also can be given as a free of charge items for order item.
Configuration steps: INCLUSIVE
SAP follows condition technique to configure free goods automatically.
Maintain pricing procedure
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Maintain pricing procedures
Choose free goods procedure NA0001 and select it
Click on copy icon on application tool bar and rename it Ex: SRI001
Condition type is NA00 and Access sequence also NA00
Save it and Exit
Activate free goods determination
Path:
IMG
Sales and distribution
Basic functions
Free goods
Condition technique for free goods
Activate free goods determination
Go to new entries
Specify our sales area, document pricing procedure, customer pricing procedure and specify our free goods
procedure Ex: SRI001
Save and Exit
Control free goods pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Control pricing for free goods item category
Choose item category TAN from position button
Specify the pricing as X = Pricing standard
Choose item category TANN from position button
Specify pricing as B = Pricing for free goods (100% discount)
Save and Exit
Maintain condition type for 100% discount
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain condition type for 100% discount
Check whether condition type R100 is available or not (R100 = is 100% discount)
Exit
Maintain pricing procedure for pricing
Path:
IMG
Sales and distribution
Basic functions
Free goods
Control free goods pricing
Maintain pricing procedure for pricing
Choose our pricing procedure form position button and select it
Click on control data icon under dialog structure
Include condition type R100 between the steps of discounts.
Specify requirement = 55 and Routine No: 28 (100% discount) in Alt. CBV.
Save and Exit
Requirement 55: The Routine No. 55 is assigned to condition type R100. If the user wants to look both revenues
and sales deductions for the free items since the product that we are going to give as a free of charge item can be
sold separately in the same sales order. Then the item category of free goods TANN has the pricing value as B.
Then the system calculates value of the free goods as 100% discount as we discussed above the same material [that
is going to be given as a free of charge item]. Some times the same item is going to be given as a normal item.
Then system calculates price for normal item and system should not calculate price for same item [free of charge
item]. So as to perform this calculation we have to assign Requirement/Routine 55 is to assign condition type
R100.
Alt CBV = 28: [100% Discount] Condition type R100 should be taken as a ZERO value. The formula 28
calculates condition type R100 value as a ZERO.
Set Transfer of cost to Main item: [Copy control]: Transaction code: VTFL
Copy control is a concept by which the system copies the data from source document to target document.
Path:
IMG
Sales and Distribution
Basic functions
Pricing
Free goods
Control free goods pricing
Set transfer of cost to main item [copy control]
Choose Billing type F2 Delivery document type LF from position button
Select it and click on itemicon under dialog structure
Choose item category Ex: TAN
Click on details icon
Click on display or change icon
Choose item category as TAN again
Select it and click on details icon
Check cumulative cost
Save and Exit
Cumulative cost controls whether the cost value (VPRS) is to be copied from relevant sub items into main items.
Sub items cost are not relevant for billing.
Maintain copying control: Transaction code: VTAA
Path:
IMG
Sales and Distribution
Basic functions
Free goods
Control free goods pricing
Maintain copying control
We maintain copy control at item level category for free goods. In this field we can control whether the
free goods should also be transferred when we copy from one document to another document.
Choose source document type as QT and target document type as OR from position button
Select it and click on item control button under dialog structure
Choose AGN item category from position button
Click on display or change button
Again click on AGN
Click on details icon
Check Re u2013 explode structure/Free goods
Save and Exit
This indicator controls whether the free goods are copied from source document to target document or redetermined
again.
Maintain condition records for Free goods [INCLUSIVE]: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions
Free goods
VBN1 u2013 Create
Specify condition type NA00
Click on key combination
Specify all the data
Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the Material No., Minimum order quantity (Ex: 10), Specify [from] the free goods quantity (Ex:
10), Unit of measure u201CEAu201D (Each), Free goods (are free goods) as u201C1u201D.
Calculation procedure: We can specify the Routines for calculation procedure as 1 or 2 or 3
1 = Pro u2013 Rata (Proportionate): Ex: If the customer places order for 100 cases of material u201CXu201D, then customer
receives 20 cases of same material as free. That means, the business can say that buy 100 and get 20. If the
customer orders for 162 cases, then system automatically grants 32 cases as a free of cost (162x20/100 = 32 Cases).
2 = Unit of reference: When customer orders for 100 cases of material u201CXu201D, then the customer receives an
additional 20 cases as a free of goods. That means business can say that buy 100 get 20 free by granting 200 free
for every full of 100 cases. The customer places order for 162, then system automatically grants only 20 cases
(100x20/100=20).
3 = Whole unit: When a customer places order for 100 cases of material u201CXu201D, then the customer receives additional
20 cases of material u201CXu201D as a free of goods item. The business can say that buy 100 and get 20 free of charge items.
If the customer orders for increment of 100 that means 200 (100 + 100) items, then he gets 40. If he placed the
order for 101 u2013 199 items he gets only ZERO.
Save and Exit
Condition record for EXCLUSIVE: Transaction code: VBN1
Path:
Logistics
Sales and Distribution
Master data
Conditions free goods
Specify the discount type u201CNA00u201D
Click on key combination
Click on Choose inclusive by clicking the INCLUSIVE/EXCLUSIVE push button
Specify the sales organization, distribution channel
Specify customer number and validity periods, material, minimum quantity, order quantity, unit of
measure, calculation procedure, free goods (3)
Specify additional material free goods (if other goods is going to be given as a free of charge item.
Save and Exit
Go to VA01 and raise the sales order for INCLUSIVE and EXCLUSIVE.
See the Free Goods effect.
Condition type NRAB = Free goods: Requirement = 59, Alt CBV = 29: [only for INCLUSIVE purpose]
Requirement 59: We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases
of product u201CXu201D, then he receives 10 cases of the product free. If the user would not like the additional line item in
the sales order for free goods rather than the discount of the 10 cases is represent in the same line item as other 90
cases. If the free goods discount should not apply on credit for returns that do not make reference in the previous
document.
Alt CBV 29: The condition type NRAB is to be assigned with 29 formula to support inclusive free goods
agreement where the user would have to apply the discount to the order item rather than having a sub item
generated for the free quantity.
Ex: The customer orders for 100 cases of product u201CXu201D, 10 cases are free instead of having a free sub item generated
b the system to represent the free 10 cases, the user would like to have a discount applied to the 100 cases line item
equal to the value of the 10 cases.
NOTE: Free goods can only be configured on document category type u201CCu201D (OR). That means we cannot configure
free goods on Inquiry and Quotation.
Header Conditions
SAP has delivered two kinds of condition types: (1) Header conditions
(2) Item conditions
Header conditions: The value of the header condition applies to the whole items in the sales document.
Header conditions do not have any access sequence.
So that, value of the header conditions should be maintained manually.
Ex: HA00, HB00
Configuration settings:
Include condition types HA00, HB00 in V/08 in between the discount condition types.
Go to VA01 and raise the sales order
Select line item and go to Go to button
Header Conditions
Include condition type HA00 HB00 with values [HA00 is percentage discount and HB00 is absolute
discount]
If HA00 = 1%, then system applies 1% on base value on all items in the sales order.
If HB00 = 100/- Rupees, then system applies 100/- Rupees proportionately to all items in the sales order. If sales
order has two items, then system applies 50/- Rupees to each item.
Click on activate button
Go to item condition screen
Check how system applied header conditions for line items
NOTE: Make sure that sales order contains more than one item.
Condition Scales
We can maintain scales for each and every condition type. So that we can determine pricing conditions values
depending upon the range of the order quantity.
Ex: If you maintain condition record for PR00 for material one as a 100/- Rs. For 1 material, then we can maintain
scales for this material like below:
From Quantity Price
1 u2013 10 1000
11 u2013 20 999
21 u2013 30 998
31 u2013 40 997
Configuration settings:
Go to VK11
Maintain condition record for PR00
Select line item and click on scales icon on the application tool bar
Maintain scales and scale rates accordingly
Save and Exit
Go to VA01 and raise the sales order
Enter the order quantity according to the scale and see the scale effect
Regards,
Siva

Free goods determination from material determination.

Hi experts,
I have one issue for you,
My scenario is:
we issue freee goods 1:1. i configured free goods setting and maintained VBN1 (condition records for free goods). i even maintained material determination configuration settings and maintained VB11 (condition records for material determination). The problem is system proposing free goods automatically when i process sales order without material determination list, if i go through material determination list system not determining free goods nor giving any message. what is the system behaviour if we go through material sustitution list to free goods. the main item (for free goods)will be existed in the substitutiion list. plez help. any suggestion will be highly appreciated.
thanks,
sada

Hi
Please consider the two issues separately. Don't club both the issues. If you have records for both material determination and free goods.,
1. Whether the material substitution is happening perfectly (as per the records created in VB11) or not.
Next.,
2. check whether the free goods are determined for the material in the sales order line item (as per the records created in VBN1) or not.
Please check and post the result.
Sometimes the freegoods will be determined in the sales order but will not create any second line item(as sub item) because while creating the records in VBN1 if you select the option 'Free goods Inclusive without line item generation. In this case NRAB condition type will be determined instead of R100.
So, also check the conditions tab and see whether the entire quantity is priced or not.
Thanks,
Ravi

Steps for free goods, purchase order and sales order

Hi all,
I am just starting to learn SAP and would appreciate it anyone can guide me along with navigation/steps for the below questions:
1) can we create free goods automatically when purchase order is generated?
2) Can we duplicate data from the purchase order to the inputs of sales order?
Thank you so much for your help!

Hi Experts,
I set Free Goods determination Inclusive Calculation Rule 1=Pro Rata and Cal Rule 2=Unit reference both are working fine.
When trying for cal Rule 3 it gives error message "The system determined free goods with quantity 0 for item 000010
Means for 10Ton of A product 10% means 2To are free. If I apply quantity in multiple of 10 i.e.10, 20 30 free goods are determined, delivery & billing is working well.
But if I apply 25Ton or 38ton, it is not even giving minimum discounts say for 25ton, it should give atleast 20ton equivalent fre goods. I checked in rounding rule OB90 where my company code3000 is giving 10 2 digit for USD currency. I set like this. When I checked pricing for condition type R100 it says requirement 055 not fulfilled. However I have maintained Req 055 & BaseType 28 in pricing procedure.
For cal rule 3 what else setting I should check.
Early reply with detail steps shall be highly appreciated.
Thanks

Inclusive Free Goods Determination ?

Hi,
   Can someone dend me the config. steps for inclusive free goods determination .
Regrds,
Binayak

dear B B
please gothough this
FREE GOODS:
     It can be configure in SAP by following two methods
A)     Manually          B)     Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
     a) Exclusive          b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001-   free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2:     Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3:     control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
     Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value   = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as   a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid     periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A-   (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula:     100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
-- Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards pls
siva

Create Free Good item with Action profile assigned to item category

Hi,
I want to create a free good for an item in a CRM sales order only during a certain period with an action ie if the main item is entered in a sales order during a certain period, a sub-item which is different from the main item should be created as a free good automatically.
How should I define the action and the condition ?
Regards,
Meenakshi

Maintain your entries in " Determine Item Category For Free Goods Item"
For the combination of Order Type-ItemCatgrp(ERLA)-Usage(Free)-Item Category(Tan)
Lets see if it works for you.

Free good in promotion

what is the process to give the free goods one product with other product.
Ex.pen with notebook
amit

Transaction *VBN1* for free goods condition record.
Free Goods determination:
FREE GOODS:
It can be configure in SAP by following two methods
A) Manually B) Automatically
A) Manually:
By specifying higher level item category for a line item, we can determine free goods as a free of charge items during sale order processing.
B) Automatically:
System proposes free of goods items automatically in the sale order. In automatic free goods configuration system follows two methods
a) Exclusive b) Inclusive
Exclusive:
System configures free goods in exclusive option by free goods quantity is going to be excluded in order quantity ex: 10 items, line item is free, then system configures free goods as a ten plus one.
Inclusive:
System configures free goods in inclusive option by free goods quantity is going to be included in order quantity ex: for 10 items, one item is free, and then system configures free goods as Nine plus one
Note: In exclusive method, other items can be given as a free of charge items for order item
Configuration steps:
Inclusive:
SAP follows condition techniques to configure free goods automatically
Maintain pricing procedure:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  maintain pricing procedure
Choose standard pricing procedure NA0001- free goods (SD) and click on copy as button and re-name it.
Condition type NA00; access sequence -- NA00
Step 2: Activate free goods determination:
IMG  SD  Basic functions  Free goods  Condition technique for free goods  Activate free goods determination
Go to new entries and specify our sales area, specify document PP- as A, customer PP as one and assign free goods procedure ex: NA0001.
Step 3: control free goods pricing:
Control pricing for free goods item category
Choose item category TAN and specify the pricing as a X (pricing standard)
Choose item category TANN and specify the pricing as B (100% discount)
Step 4: Maintain condition type for 100 % discount:
Choose condition type R100 (100% discount)
Step 5: Maintain pricing procedure for pricing:
Choose our PP from position button , select it and click on control data icon and include condition type R100 between steps of discounts & specify requirement = 5 and specify item no: 28 as a 100% discount in alternative formula for condition base value (AltcBV)
The requirement = 55 can be assign to condition type R100. If the user wants to look both
Revenues and sales deductions for the free item since the product that we are going to give as a free of charge item can be sold separately in same sales order the item category of free goods (TANN) has the pricing value as a B then the system calculate value of free goods as 100 % discounts . As we discussed above the same material (that is going to be given as a free of charge item). Some times the same item is going to be given as a normal item, then system calculate price for normal item, system item ( free of charge item ) so here to perform this calculation we have to assign requirement = 55 for condition type R100
Alternative Condition Base Value = (100% discount)
Condition type R100 should be taken as 0 value the formula 28 calculate condition type R100 values as a 0
Set Transfer of cost to maintain (copy and control)
IMG  SD  Basic functions  Free goods  Control free goods pricing  Set transfer of cost to maintain (copy control)
Copy control is a concept by which the system copies the data from source document to target document.
Choose billing type as F2 and delivery document type LF,
Select it & click on item icon & choose item category TAN, click on details icon and
Click on display-change icon and choose item category TAN again select it & click on details icon and check cumulate cost.
Cumulate cost controls whether the cost value (VPRS) is to be copied from relevant for sub-item into main items sub-item cost are not relevant for billing. Save & exit
Maintain copying control:
IMG  SD  Basic functions  Free goods Control free goods pricing  Maintain copy control
We maintain copying control at item level category for free goods. In this field, we can control whether the free goods should also be transferred when we copy from one document to another document.
Choose source document type as a QT & target document type as a OR &
Select it & click on item control button under dialogue structure
Choose AGN item category from position button & click on display or change button, again click on AGN & click on details icon and
Checks re-explode structure/ free goods (this indicator controls whether the free goods are coped from source document to target documents or determined again.)
Save and exit.
Maintain condition records for free goods:
Logistics  SD  Master data  Conditions  Free goodsVBN1 (create)
--Specify condition type NA00 & specify sales org. distribution channel, customer number, valid periods and
--Chose option as inclusive.
--Specify the material number and
--Specify the minimum order quantity,
--Specify the quantity from which the free goods should be applied
--Specify the unit of measure and
--Specify free goods (are free goods) as a one.
Calculation procedure:
We can specify the routines for calculation procedure as a A- (1- pro- rata- proportionate)
A) Pro-rata:
Ex: if the customer places order for 100 cases of material A, that customer receives 20 cases of same material is free. That is the business can say that buy 100 and get 20.
If customer orders for 162 cases, then the system automatically calculate 32 cases as a free of cost. 162 *20/100 = 32.
B- Unit of reference:
When customer order for 100 cases of material A , then the customer receives additional 20 cases of A as a free of goods items that is the business can sign that buy 100 and get 20 free, by inventing 20 free for every full of 100 cases.
If the customer places order for 162, then system automatically grants only 20 cases.
Formula: 100*20/100 = 20
C- Whole Units:
When customer places order for 100 cases of material of A, then customer receives additional 20 cases of material A that is business can say that buy 100 and get 20 free of charge items.
If customer order for increment of 100 that is ex: for 152 items, he get only 20 . If place the order 200 items, the he gets 40 that inclusive.
Condition records for exclusive:
--Specify the discount type NA001 &
--Click on exclusive option and
--specify the sales organization, distribution channel, customer number, validity periods and materials, minimum quantity, order quantity, unit of measure, and calculation procedure, free goods and
--Specify additional material free goods (if other goods are going to be given as free of charge item) save it and exit.
--Go to VA01 and raise the sales order for inclusive and exclusive and see the free goods effects
Condition Type: NRAB free goods; requiremet-55; AltCBV-29(only for inclusive)
When the customer doesnt want physically fee goods and the free goods price should be deducted from total price ten we can use condition type NRAB, which hides free goods line item in the sales document
Settings:
Pricing for inclusive free goods w/o item generation
--Choose our pricing procedure
Include condition type NRAB with requirement 59 and alternative formula for condition base value- 29 between discount condition steps.
--Go to VBN1, maintain condition record for free goods with Inclusive method and make sure that free goods category should be 3( inclusive rebate w/o item generation)
--save it
--Go to VA01, raise the sales order and check NRAB condition type effect.
Requirement 59:
We have to assign requirement 59 to the condition type NRAB. If the customer buys 100 cases of product A then we receives 10 cases of product free.
If the user would not like the additional like items in the sales order for free goods rather than he discount of 10 cases be represented in the same line item as the other 90 cases. If the free goods discount should not applied as credit for return that doesnt make reference previous discounts.
Alt formula for condition base value-29:
The condition type NRAB is to be assigned with 29 formulas to support inclusive free goods agreements where the user would have to apply the discount to the order item rather than having a sub-item generated for the free quality. Ex: the customer having a free sub-item generated by the system to represent the 10 free cases. The user could like to have a discount applied to the 100 cases like item equal to the value of the 10 cases.
Note: Free goods can only be configuring on only document type C that means. We cant configure free goods inquiries in quotations.
rewards if useful.

Free goods Delivery charge

Hi,
I wants to add the Delivery costs to Free flaged Purchase order
pls help me on this
thanks,
Mohan

Hi Mohan,
In SAP free goods means it is obsolutly free of charge....
If you want to customize your requirment, means you want to include the delivery cost to the product...
you need to do some coustomising in codition...
in Standard condition type FRA1, FRB1 ...etc are the item level conditions...When you make the PO for free goods, automatically in item level condition tab will disappear ( no price will come in line item). so you can't give the fright charge here...
Now you need to coustomixze new condition type (ZFR1) coping from FRA1 and in that tick as Header condition...
Now you create the PO fro free goods and tried to give the ZFR1 in the header condition of the PO..
I hope this will solve your question.
Regards
Anand

Free goods tick mark coming automatically in PO?

Hi Gurus,
While creating PO, free goods tick mark coming automatically in PO if i m entering net price..
I have checked material master as well as vendor master.Nowhere free good maintained in both.
Then, why it is picking automatically in PO?
Pls help..

Hi
The meaning for invoice receipt check box under invoice tab for any line item is that Po is expected Invoice for that line item.
If this check box is not set then PO considered free items with no invoice
So generally Invoice Receipt Check Box are kept in display mode through OMJ4 so that end user can not modify it
Edited by: Sanjay Shah on Feb 4, 2010 10:17 AM

Free Goods Indicatior setting automatically for a matl and vendor combinati

Hi, When i create a PO ( doc type NB) for a particular material and vendor combination, m finding Free Goods Indicatior is setting automatically. Can anyone please tell me, where we will configure this?
Thanks nd Regards,
Nagaraj

hi
check ur material will be non valuated or u have not maintained the accting view for the material
also check for inforecord for material and vendor combination
regards
kunal

Automatically adding free goods in SO

I have a finished good that I would like to sell with a third-party free good. I have set up both materials in MM. How do I link the 2 together such that when I create a SO for the finished good, the free good will be added automatically? Is there any special settings to do in MM for the free good? I have set the free good item category to BANS (3rd party item) and external procurement.

Hi johntan,
As per my understanding, standard functionality does not support free goods determination in sales order for third party processing.
Regards,
Rajesh

Promotions automatically detected free goods (no changable)

Hi,
We want to restrict our users to do any change in automatically free goods detected due to promotions.
if we have promotion of 1 carton on purchase of 10 cartons.
when user create order with 10 cartons two lines are comming.
one is standard 10 carton and second one is with 1 carton free good.
here user can change 1 carton to 5 carton but we want to restric user to do this change.
How can we achive this task.
regards
Malik

Dasaradha thanks for your valuable reply.
there should be some procedure to do through customization without going into
ABAP ( User Exit or Enhancement ).
Any idea.
Regards
Malik

How to include a free goods as gift automatically

hi,
my scenario is like this in order to encourage the customers buying more products i would like to give them a gift article as a free goods which depends on the value the customer buys.
example
for 5000RS of billing i would like to give parker pen as free
for 10000RS of billing i would like to give microwave oven.
these gifts should be automatically come in the sales order once the customer reaches RS 5000 it should prompt for parker pen and for 10000 rs micro wave oven.
where to do the configuration settings /
does it require any user exit?
No manual inclusion of gifts by the end user?
regards
prashanth
Message was edited by:
prashanth goud

u cannot maintain scales values wise. i think u can do it on the price of he material. if the price of matr is 5000 per piece
then ur calculation works there 1 piece 5000 ...pen free
2 piece 10000..micowave
as u know the above can be done by miantaining scales.
that was my idea revert back if i am wrong
cheers
kiran

Free goods is issued, but R100 discount is not triggered in proforma invoic

hi all,
free goods is determined in sales order with 100%discount for the free item, but in the proforma invoice (F5) the free item is coming with price. in copy controls between sales order and proforma invoice(F5) the pricing type is G "copy pricing elements unchanged and redetermine taxes. the item category is pricing with 100% discount.
thanks in advance

Hi
Free goods in sales order is picked mainly from condition type R100 thro your sales order Pricing Procedure( both inclusive or exclusive)
If you go to the details of R100 in V/06 there wont be access sequence
This R100 mainly works on requirement 55 in the pricinig procedure and alternate base value formula 28
that means this works on special ABAP routines
May be these routines might have a link to proforma billing type thro doc category proforma in VOFA details for F8 which makes this R100 as ineffective and hence prices are reflected there
Again these values are not going get carried to any GL accounts as this is a proforma only
Regards
Raja

Free goods determination (Quantity Update)

Hi Experts,
Need your help in below scenario
Company wants if a customer buys 100 tons of cement in a month, 2 tons of cement is given to him free
Kindly suggest how to map this scenario in SAP
I have thought of free goods but donu2019t know how to update the quantity
For example if a customer buys 100 tons of cement in 10 days
10 tons of cement each day on 10th day he should get 2 tons of cement free automatically.
It means if he places the order for 10 tons of cement on 10th day he should get 12 tons of cement
As customer has completed the target of 100 tons of cement and we are giving 2 tons of cement free
Thanks in Advance for your help
Krushnakumar Rathi

hi,
create a schedule agreement to the same. say 100 bags of cement for 10 days = 10 bags per day and at the last day
basing on the quantity it has to pickup 10+ 20 bags as free.
In exclusive free goods access sequence there is a requriment field in which you can assign your own routine for your requriment.
logic:
create a Z table with maintaince view and the fields there inside maintaince view is:
1. line items, order quantity, order date, last day of the sales order creation for eg.
and make it to compare to the order quantity or according to no of line items split. here you need to consider some parameters & give logic to the system that when is the last date of your delivery. for that you need to take last line item or order quantity ends into consideration in that routine.
when ever the scheduling agreement is getting triggered from there only system understands that this is the last day and it will trigger the free goods as expected
then only the exclusive goods that is 10+20 bags has to trigger automatically.
please check teh same in teh system and confirm the fourm
regards,
balajia.

Free Goods Automatically triggered in PO

Similar Messages

Maybe you are looking for