Free jabber disconnect after call for 10-20 sec
I try to use Free Jabber call to my system via DNS SRV record. It can connect to system but It will disconnect after call for 10-20 sec.
All case which call via DNS SRV record, I checked and found
-The problem happen only call to TPS (via conductor).
-If call to endpoint, It's working fine.
-If call to MCU (registered with VCS), It's working fine.
I see log files which new INVITE is sent by TPS to VSC-Exp, VCS-Exp tries to send it out and then TCP connection fails.
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,239" Module="network.tcp" Level="ERROR": Src-ip="172.18.7.8" Src-port="25297" Dst-ip="199.19.190.28" Dst-port="5060" Detail="TCP Connection Failed"
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,240" Module="network.sip" Level="DEBUG": Action="Sent" Local-ip="172.18.8.8" Local-port="7001" Dst-ip="172.18.8.20" Dst-port="25008" Msg-Hash="5130918937689017019"
SIPMSG:
|SIP/2.0 408 Request Timeout
I try to use Free Jabber call to my system via DNS SRV record. It can connect to system but It will disconnect after call for 10-20 sec.
All case which call via DNS SRV record, I checked and found
-The problem happen only call to TPS (via conductor).
-If call to endpoint, It's working fine.
-If call to MCU (registered with VCS), It's working fine.
I see log files which new INVITE is sent by TPS to VSC-Exp, VCS-Exp tries to send it out and then TCP connection fails.
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,239" Module="network.tcp" Level="ERROR": Src-ip="172.18.7.8" Src-port="25297" Dst-ip="199.19.190.28" Dst-port="5060" Detail="TCP Connection Failed"
2015-02-09T12:45:04+07:00 DC-VCSE tvcs: UTCTime="2015-02-09 05:45:04,240" Module="network.sip" Level="DEBUG": Action="Sent" Local-ip="172.18.8.8" Local-port="7001" Dst-ip="172.18.8.20" Dst-port="25008" Msg-Hash="5130918937689017019"
SIPMSG:
|SIP/2.0 408 Request Timeout
Similar Messages
-
i paid for the single after effects cc app and I used the same account with the expired free trial . so after paying for after effects, i try downloading it but it brings up a screen saying that i need to purchase after effects to continu
Activation Stuff
Mylenium -
Call FM destination often disconnected after calling failed
Dears,
when i call RFC registered in .net with sap connector, it is often disconnected auto. after calling failed.
then we should re-start RFC server in .NET, and the connection (RFC destination)will be ok then
what tools could i use to trace these and any advice ?
BRHi,
when i execute RFC with empty table parameters, it is ok.
But it give error 'data not received' when set some data in the table parameter and then the connection is shutdown.
ths for your tool . -
Error -63043: FPGA disconnects after running for a few seconds
Hello,
I face the following problem whenever I try to run a FPGA VI directly from my host PC onto my PXI 7831R through the ethernet.
Initially, MAX shows my remote PXI system as 'Connected', and the FPGA VI compiles fine.
But when I hit the 'Run' button, the VI seems to run fine for 3-4 seconds, after which it hangs (screenshot attached). A couple of seconds later, it returns the following message :-
" LabVIEW FPGA called another software component and that component returned the following error
Error code: -63043
NI-RIO FPGA Communications framework: The session is invalid. The target may have reset or been rebooted. Check the network connection and retry the operation. "
The VI continues to run on the FPGA, but I can't control it anymore from my host-PC. Even MAX shows the remote system as disconnected, after this error occurs. All I am left to do is to reboot my host-PC as well as the remote PXI target; to reach the beginning of this problem.
I have checked the NI-RIO settings. Both my host-PC as well as remote PXI system have the same NI-RIO 3.0.0 version installed. I am running LabVIEW 8.6 .
Can anyone help ?
Attachments:
Error Screenshot.JPG 89 KBHi everyone, I have the same problem regarding the 63043 error code
I´ve simplified my FPGA vi up to a simple write and read program of a port, as shown in the attachment, but I still have the same error.
It´s interesting that the program runs, note in the jpg file that the while loop counter suddenly stops at Numeric=10, it means the program ran 10 iterations. Also the input port succesffully read the pin value, this meas that the program ran properly, but the SBRIO rebooted when Numeric was 10 and the target device disconnected from the project, i wonder why?
The target device is an sbRIO-9632 , serial number 01452AC3 with the following software installed:
NI-RIO 3.4.0 - January 2010
DataSocket for LabVIEW Real-Time 4.7.0
EPICS Server I/O Server 1.6.1
LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
LabVIEW Real-Time 9.0.1
Language Support for Japanese 9.0.1
Language Support for LabVIEW RT 1.0.0.3
Modbus I/O Server 1.6.1
NI-RIO 3.4.0
NI-Serial RT 3.3.4
NI-VISA 4.6
NI-VISA Server 4.6
NI-Watchdog 4.0.1
Network Variable Engine 1.6.1
Run-Time Engine for Web Services 2.0.1
SSL Support for LabVIEW RT 2.0.1
System State Publisher 1.1.0
Variable Client Support for LabVIEW RT 1.6.1
Web Server for LabVIEW RT 2.0.0
Available add-ons:
LabVIEW Control Design and Simulation 9.0.1
However, if I run a program in the RT processor without referencing any vi on the FPGA it runs without problems, it´s only when a file is loaded into the FPGA that the system reboots and the error message appears.
Please help me
leito
Attachments:
error-63043.jpg 264 KB -
Ios 5.1 worst iphone 4s incoming call no audio for caller for 3-5 sec
i bought iphone 4s (ios 5.01) jan 2011. for the date of purchase i had problems form the date of purchase. There was no service (network issue) and i thought it would be my new sim card. but i tried it on my wife's mobile it worked well(no issue). i gave to showroom and booked for a complaint and after 2 weeks they called me and said they have updated to ios 5.0.1 (9a405). i had no more issues with the network but i had issues in outgoing calls. Whenever i call someone they wont be able to hear me for first few seconds(2-4 secs) and i stared to talk after 3 secs regularly(since the customer care is worst here i dont want to give and wait for another 3 weeks where i wont get right solution too). Later i had a ios update (ios 5.1) meesage while my phone was connected to wifi. i thought it will solve the issue (after reading some reviews) and updated to ios 5.1 which is what i am using right now. But now i have more issues than before.
1. The screen goes blank(dark screen) when i try to call back (i.e after call busy) 2-3 times. then i have to press home button and once again i have to open call button(green layer which will be on top just like on call) and hang up and try once again.
2. Sometimes my network drop zero then start searching network display no service for few second and then the network once again appear while on call(no issue with network provider i checked with other phone which is working well)
3. Now when there is incoming call there will no audio for caller(not me) for 2-5 sec (i did a count..ha..ah) they wont be able hear.
i did try reset to factory setting, no other apps installed. did try everything and nothing helped..i am also lazy to write this but no way to find a solution..pls do help and sort the issues permanently..
iphone is costly only because its an apple product and for its ios which is faliure now. so i suggest them to reduce the price and shouldnt say they are the trend setter or innovative anymore..worst ios and i have read many reviews and i know there are people who dont want to waste time/lazy by writing the review..but they need soultion..i am ashamed of my iphone which i bought 45000 rs when compared to 15000rs samsung product with no issues like these..i have 3 problems listed below while using iphone 4s with ios 5.1 version
1. The screen goes blank(dark screen) when i try to call back (i.e redialing 2-3 times). then i have to press home button and once again i have to press call button(sometimes green layer which will be on top of the screen) and press red button to close the call and try once again.
2. Sometimes my network drop zero then start searching network then display no service for few second and then the network once again appear (no issue with the network provider i checked with other phone which is working fine)
3. When there is incoming call the people on the other end of the call (caller and not me) cant hear for first 2-5 sec (i did a count..ha..ah) they wont be able hear.
Is it clear now buddy.... -
Outbound call doesn't disconnect after call end
Have you ever seen something like it:
I make a call from my ip phone (3911 or 6921) to an external phone (ex: cell phone: 084645727) and the call works fine, but when cell phone turned off the call, on my ip phone the call still connected, ip phone show me on display that the call still active, the call is just disconnect when I put the phone onhook.
I use CUCMBE: 7.1.3(SU2)
Cisco 2821 : c2800nm-spservicesk9-mz.124-20.T4.bin
debug vpm signal
BHEGV1#R2 Got Event R2_ALERTING
*Nov 25 07:42:36: show voice call status
CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers
0xD8803 20E8 0x48177B78 0/1/0:0.3 0/1:1 *2125463737 g711ulaw 7500/40
0xD8847 1C9D 0x48177B78 0/1/0:0.1 0/1:3 7434 g711ulaw 1/7500
0xD88B2 26E8 0x48177B78 0/1/0:0.28 0/1:5 *087068998 g711ulaw 7500/30
0xD88B6 27E8 0x48177B78 0/1/0:0.27 0/1:2 *084645727 g711ulaw 7500/30 (it is my call)
0xD88BD 1D22 0x48177B78 0/1/0:0.2 0/1:4 7491 None 1/7500
0xD88C0 28E8 0x48177B78 0/1/0:0.22 0/1:6 *084743874 g711ulaw 7500/30
After cell phone turned off the call, the debug vpm signal just show me it:
*Nov 25 07:42:50: htsp_process_event: [0/1/0:0(27), R2_Q421_OG_ANSWER, E_DSP_SIG_1100]
Does anybody could help me !
Regards.Hi All
I had this issue with Oi and EBT, not sure if this is the same, but i had an issue where the Voice channel in clearfwd - I was facing the Bug CSCtd74470, there a workaround but the upgrade of the GW to Version 15 works properly, the output of the "sh vo po sum | include clearfwd" will confirm if this is your case.
Also in others situations I solved my issue applying the command timeouts call-disconect 3, under E1 Port
Please rate this post
Cheers
Bruno Rangel
"Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
Renato Russo -
Wifi disconnects after connecting for a few seconds [SOLVED]
I have an interesting situation and perhaps you guys can give me a hand.
I'm installing Arch on a system that only has a WiFi; no big deal.
So, I get the live CD and
1. Start it and choose the network install (that's the only choice for this CD)
2. Go to tty2 and issue the following commands:
a. ifconfig wlan0 up
b. iwlist scan and I get:
wlan0 Scan completed :
Cell 01 - Address: 00:17:3F:93:05:63
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=38/70 Signal level=-72 dBm
Encryption key:on
ESSID:"ITTwo-wifi"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=00000010fe6584f5
Extra: Last beacon: 60ms ago
IE: Unknown: 000A495454776F2D77696669
IE: Unknown: 010482848B96
IE: Unknown: 030101
IE: Unknown: 2A0104
IE: Unknown: 32080C1218243048606C
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD07000C4303000000
That's a good sign
3. Issue the command to link
iwconfig wlan0 mode managed essid ITTwo-wifi key "s:bbR\:\)cri2rr" retry 7
4. Test for association with iwconfig wlan0:
wlan0 IEEE 802.11bg ESSID:"ITTwo-wifi"
Mode:Managed Frequency:2.412 GHz Access Point: 00:17:3F:93:05:63
Bit Rate=1 Mb/s Tx-Power=20 dBm
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:6262-525C-3A5C-2963-7269-3272-72
Power Management:on
Link Quality=39/70 Signal level=-71 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:1 Invalid misc:0 Missed beacon:0
looks good so I do : dhcpcd wlan0
and it fails, over and over and over ...
Then after much testing I realized that if I issue the iwconfig wlan0 say 5 seconds apart on the first one it shows, as above, that is connected
and in the second one
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry limit:7 RTS thr:off Fragment thr:off
Encryption key:6262-525C-3A5C-2963-7269-3272-72
Power Management:on
It's not associated !!!
I have exhausted testing options to no avail?
Am I missing something obvious ... or not so obvious?
Any help/ideas will be appreciated.
R
Edit:
The card is a Linksys and the chipset is recognized as : Linksys WUSB54GC v3 802.11g Adapter [Ralink RT2070L]
Last edited by ralvez (2011-02-09 01:08:29)Thank you for the reply guys!!
@treysis, In the logs I got an error something like "<eissid> deauthenticated (reason 6)" or something to that effect and I was wondering what that means... I suppose you are correct and that the system is trying to tell me that I need to use wpa_supplicant. I hope that's part of the install CD
I'll give it a try and I'll report back .
Thanks for the help and ideas.
R.
edit : bad typing
Last edited by ralvez (2011-02-08 19:37:49) -
T400- Wired shows "disconnect" after undock for more than 1 hour
Have T400 running Win7 Enterprise x64. When I undock and take it to meetings, and use my Wireless connection, when I return to dock it, it stays connected to Wireless always. When I look at the wired connection is shows 'disconnected'. If I switch off the Wireless, I then have no connection at all. If I 'disable' then 're-enable' the wired adapter, then it immediately connects to wired, and works fine.
My desired experience is when undocked, use Wireless, when Docked always use Wired. I have rebuilt the OS recently thinking this may fix it, but I get the exact same results. Are there anythings I can do to make this work correctly, as desired? Wired network at my company is so much faster, and I work with large data sets, so I am hoping to get this more seemless.
Thanks in advance.
T400 (2768 KC7)
Win7 x64 Enterprise
Bios 3.18 5/17/2010Have T400 running Win7 Enterprise x64. When I undock and take it to meetings, and use my Wireless connection, when I return to dock it, it stays connected to Wireless always. When I look at the wired connection is shows 'disconnected'. If I switch off the Wireless, I then have no connection at all. If I 'disable' then 're-enable' the wired adapter, then it immediately connects to wired, and works fine.
My desired experience is when undocked, use Wireless, when Docked always use Wired. I have rebuilt the OS recently thinking this may fix it, but I get the exact same results. Are there anythings I can do to make this work correctly, as desired? Wired network at my company is so much faster, and I work with large data sets, so I am hoping to get this more seemless.
Thanks in advance.
T400 (2768 KC7)
Win7 x64 Enterprise
Bios 3.18 5/17/2010 -
Please find below the "Call for Demos" for the
IPTComm 2008
http://iptcomm.org
Heidelberg, Germany,
July 1-2 2008.
Please feel free to circulate this call for demos to interested colleagues, mailing lists, forums and blogs.
==============================================================
Call for Demos:
IPTComm2008 (as already IPTComm2007) features a special session for demonstrations. Topics of interest cover all aspects of Services and Security for Next Generation Networks, as outlined in the main conference call for papers. Demos will be held as closing session on July 2 at the main conference venue. All demonstration submissions should include a title, a short description of the system, a summary of its novel characteristics, the list of functions and features to be demonstrated, and state the significance of the contribution relevant to the conference themes. Submissions must be in English and must not exceed four pages. We encourage authors to include in their submissions a link to a set of screenshots and/or mockups and/or animations of the proposed demonstration where possible. Submissions will be evaluated on the basis of their innovation, practical value, relevance and presentation. Accepted submissions will be published on the Conference website. Priority will be given to submissions that have industrial relevance and have a demonstrable impact on products in the short-medium term. The demo session is seen as an opportunity for researchers to come together with developers and industry to discuss practically oriented topics. Submissions are to be sent as email attachments (PDF format) to [email protected]
Deadlines:
Submission deadline: May 15, 2008
Notification: June 1, 2008
Demo: July 2, 2008
Demo Committee
Dorgham Sisalem - Tekelec
Ali Fessi - University of TubingenI am afraid I don't know how to make this Sticky... Maybe someone can email me the answer ?? [email protected]
As far as sharing material, ASUG has a non-disclosure agreements, which prohibits me from sharing the materials to the world at large. I agree that it would be nice to share ASUG presentations with everyone here at SDN/BPX, but I am not allowed to do so.
Thanks for the pointer about stickiness. -
CME Jabber on iPhone disconnects after 10 Secs
Hi all, have a problem on my jabber clients that they disconnect after 10 seconds when making outbound calls. Router 2921 - c2900-universalk9-mz.SPA.151-4.M4.bin runing CME 8.6. iPhones running Jabber 8.6.5.18781. All other devices (CIPC, 7945's etc. (SCCP)) are working fine and are able to make outgoing and incoming calls.
please assist.
this is what I get from the CME
un 8 15:10:43.459: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Jun 8 15:10:43.459: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Jun 8 15:10:43.459: //1158/E2B9A9F18216/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SPI_EVENT
Jun 8 15:10:43.459: //1159/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060;user=phone;transport=udp SIP/2.0
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK4291EAA
From: "Dave-iPhone" <sip:[email protected]>;tag=BDEC6C-1325
To: <sip:[email protected]>;tag=gf97ll6v-CC-24
Date: Fri, 08 Jun 2012 15:10:25 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1339168243
CSeq: 103 BYE
Reason: Q.850;cause=102
P-RTP-Stat: PS=539,OS=16170,PR=894,OR=17880,PL=0,JI=0,LA=0,DU=10
Content-Length: 0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK4291EAA
From: "Dave-iPhone" <sip:[email protected]>;tag=BDEC6C-1325
To: <sip:[email protected]>;tag=gf97ll6v-CC-24
Call-ID: [email protected]
Timestamp: 1339168243
CSeq: 103 BYE
Content-Length: 0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x313A9000
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 7477
Called Number : 0114674466
Source IP Address (Sig ): 192.168.244.250
Destn SIP Req Addr:Port : 192.168.244.10:5060
Destn SIP Resp Addr:Port : 192.168.244.10:5060
Destination Name : 192.168.244.10
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729r8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 192.168.244.250
Source IP Port (Media): 17620
Destn IP Address (Media): 192.168.244.10
Destn IP Port (Media): 20040
Orig Destn IP Address:Port (Media): [ - ]:0
Jun 8 15:10:43.495: //1159/E2B9A9F18216/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 102
Disconnect Cause (SIP) : 200
Jun 8 15:10:43.587: //1158/E2B9A9F18216/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 192.168.1.1:5060;branch=z9hG4bK428F1C;received=192.168.10.1
From: <sip:[email protected]>;tag=BDF344-F6
To: "Dave-iPhone" <sip:[email protected]>;tag=000000000000007f731c4248-4443c002
Call-ID: [email protected]
Date: Fri, 08 Jun 2012 15:18:20 GMT
CSeq: 101 BYE
Server: Cisco-SIPIPCommunicator/9.2.1
Content-Length: 0
Jun 8 15:11:01.471: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_OUTBOUND_REGISTER
Jun 8 15:11:01.471: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:192.168.244.10:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK42A3FA
From: <sip:[email protected]>;tag=BE7960-2177
To: <sip:[email protected]>
Date: Fri, 08 Jun 2012 15:11:01 GMT
Call-ID: 38930D6E-B0AF11E1-81BCB8F2-331935B0
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1339168261
CSeq: 11 REGISTER
Contact: <sip:[email protected]:5060>
Expires: 3600
Supported: path
Content-Length: 0
Jun 8 15:11:01.487: //1160/000000000000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 400 Bad Request
Via: SIP/2.0/UDP 192.168.244.250:5060;branch=z9hG4bK42A3FA
From: <sip:[email protected]>;tag=BE7960-2177
To: <sip:[email protected]>;tag=v7vgdted
Call-ID: 38930D6E-B0AF11E1-81BCB8F2-331935B0
Timestamp: 1339168261
CSeq: 11 REGISTER
Warning: 399 - "SoftX3000 R601-MSG Error ID:[259] LiteFME Tg register ,get Wll param error "
Content-Length: 0
Thanks
DavidJust in case you haven't solved this yet, the issue is detailed below.
Workaround
Bind all SIP traffic to a single interface, ideally the voice vlan interface.
voice service voip
sip
bind all source-interface gigabitEthernet 0/0
Cisco Mobile 8.1 integrated w/CME 8.6. On outgoing calls from Cisco mobile the call will connect, get 2 way audio and then disconnect after
15-20 seconds.
The problem is that when the call connects the CME sends a 200 OK to the Cisco Mobile app. The Cisco Mobile app fails to send an ACK to CME, so CME keeps sending 200 OK messages until it times out and ends the call.
The problem is related to CME using a different source IP address for SIP traffic than what was used for the endpoint to register. The IP used as the source address under Voice Register Global is what the TCP connection is set up to for an outgoing call. However the CME uses the best address to source traffic from when it is not bound. As these devices are on the WiFi network (not the wired voice network), the CME uses a different address to source the SIP traffic for these calls than what is defined under the voice register pool. This causes an error in the Cisco Mobile App, which is why it fails to return the ACK.
We bound SIP traffic globally under Voice Service Voip to the same IP that was defined under the voice register global. After this the calls worked fine.
Reference this Junked bug as well:
CSCtu05278 CME Call from Cisco Mobile to IP phone disconnects after
20 seconds -
Why does my phone disconnect after 4 hours of call time
why does my phone disconnect after 4 hours of call time? Is there anyway I can change this?
You mean that you're on a single call for 4 hours continously, and then it disconnects?
If so, contact your wireless carrier. That's a cellular connection issue. -
I talk breifly on my phone and it is hanging up or disconnecting the call. I am not touching anything and have plenty of bars for service? Whats going on?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Call is getting disconnect after 3 min when the caller is in queue
Hi,
I am using icm 7.0 with ip ivr 7.0. when all the agents are busy and caller is in queue,call is automatically getting disconnected after 3 min with the message " We are experiancing system problem and unable to process the call. please try again later" .
Icm and ivr script are attached
Regards,
Dinesh JoshiHi Chrish,
you are right. the timer was for 180 sec only. now things are working fine after increasing the timer.
Thanks a lot for your reply.
Regards,
Dinesh Joshi -
Why I get disconnected while calling after 3 minutes?
Why I get disconnected while calling after 3 minutes?
I wish I could put 1 more quarter and solve the problem. And yes, it happens in every call that goes beyond 3 minutes, local or international. To make it worst, I bought an iPhone 4 for my wife and has exactly the same issue, we are both from the Philippines. Thinking that they might be selling us over here the over runs or defective gadgets to my surprise my sister in law who lives in Texas is experiencing the same issue. I was looking in the apple store for support and found out that there is a batch of iphones that came out with that issue and that needs some kind of fix. The problem is that apple endoreses you to your network provider and here our network provider does not know what to do.. Have you heard of this fix? Kindly advice
-
Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows
Hi,
I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
Problem Faced -
I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
Can you please let me know if any of you guys have faced a similar issue.
Please let me know if you need any information regading the configuration used.
Looking forward for your valuable comments.
Thank you.
Regards,
Joseph Chirayath.Hi Will,
I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
Please do let me know if you need any further information.
Thank you.
Maybe you are looking for
-
Static when turning up or down volume on Klipsch 2.1
just hooked up my "Klipsch 2.1" speakers on my iMac (late '13). I used these on my mid '11 mac mini with no problem. but so far I've tried listening to K-Love radio and I'm getting static when I turn the volume up or down. I've tried turning down
-
Hello out there, I've seen other people ask about these error messages on encoding with DVDSP4 but never seen a satisfactory answer. On the record: does anyone know what these error messages mean, and even more importantly, how does one resolve the i
-
Header condition in invoice for calculating pallet cost
Hey, Based on the number of handling units in the delivery we would like to invoice the customer for this. We have set up an header/item/group condition (fixed rate) for this. In the calculation schema we have assigned a formula to the condition. The
-
How to make a VGA monitor vertically display under an Intel GMA950?
I have a Philips LCD Monitor (200WS8) attached to my thinkpad X41, and wanna use it vertically to display content while the internal screen of X41 have a normal display. But without success, the Philips LCD can get rotate 90 degree clockwise but poor
-
Html file in web page composer
hi expert, i have create one html file. the html file contain jsp script. the output is very well when i run it on my pc but when i put it in container of web page composer, the output is not display. why its happen?how can i use the html file that c