Freeze, Memory error led notification

Hello hp community.
Before writing here i have researched for similar problems of other users. I did everything what were suggested.
The problem is that after 1 or more hours of use my laptop freezes and it doesnt respond to anything, all i can do is hold power button to turn it off and then try to start again. When i turn it off after that it never starts at once and caps lock led notification flashes 3 times. it takes about 2-5 times to turn it off and on again before windows starts normally.
I have tried to do different things. I have read that the most common thing is a bad RAM memory stick so i have replaced it. I took a working RAM stick from same 4330s working laptop but it gave no results. I have tried different RAM slots.
Also tried to clean RAM slots on mother board using compressed air.
What else i were thinking about is that my BIOS cant be updated because it locked with bios password. And i cant enter BIOS aswell.
I would like to hear from you if there any other solutions.
Laptops serial number is: [Personal Information Removed]
BIOS version: F.09 -05/13/2011

Hello, i will appreciate any help!

Similar Messages

  • Led notification error

    Sir i have bought my lenovo s650 few months before,but after updating rom from system update my led notifiacion is not running..only when i put my phone on charge then the red led is showing bt no led notification is showing for calls,messages,whatsapp and other social networking apps...plzz solve my querry..
    SW-
    Model no.-S650
    Android-4.4.2
    Baseband version-S650.ROW.V109,2015/01/21 11:33
    BUILD NO.-S650,ROW_S308_150121
    PLEASE HELP ME

    Hello, i will appreciate any help!

  • Windows 8.1 RDP Virtual Memory Error

    I just upgraded to Windows 8.1 and am encountering the same problem as mentioned here:
    http://social.technet.microsoft.com/Forums/lync/en-US/068228a3-78da-4bcf-acb5-3cf5c63dee48/windows-81-preview-remote-desktop-failing-with-low-virtual-memory-error?forum=w81previtpro
    I am trying to use RDP desktop version to connect to a site (which uses RD Gateway). It says "Initiating Connection" and then fails with no error or any notification (there is nothing in the event viewer)
    If I try changing settings (removing sound from RDP, reducing resolution) I eventually get this message:
    [Window Title]
    Remote Desktop Connection
    [Content]
    This computer can't connect to the remote computer.
    The problem might be due to low virtual memory on your computer. Close your other programs, then try connecting again. If the problem continues, contact your network administrator or technical support.
    Connection worked fine on Windows 8 - is this a known 8.1 bug? It is pretty critical for me!
    Thanks

    Hi,
    Since I cannot repro this issue, I considered that following factors may cause this issue:
    Paging file value setting is too low.
    RAM issue
    First, I suggest we try following steps to check the issue:
    Step 1: Increase page file size:
    How to Change The Size of Virtual Memory (pagefile.sys) on Windows 8 or Windows Server 2012
    http://blogs.technet.com/b/danstolts/archive/2013/01/07/how_2d00_to_2d00_change_2d00_the_2d00_size_2d00_of_2d00_virtual_2d00_memory_2d00_pagefile_2d00_sys_2d00_on_2d00_windows_2d00_8_2d00_or_2d00_windows_2d00_server_2d00_2012.aspx
    Step 2: Run Memory diagnostic tool:
    From Start, type mdsched.exe, and then press Enter. Normally, text that you type on Start is entered into the Apps Search box by default.
    Choose whether to restart the computer and run the tool immediately or schedule the tool to run at the next restart.
    Windows Memory Diagnostic runs automatically after the computer restarts and performs a standard memory test. If you want to perform fewer or more tests, press F1, use the up and down arrow keys to set the Test Mix as Basic, Standard, or Extended, and
    then press F10 to apply the desired settings and resume testing.
    When testing is complete, the computer restarts. You’ll see the test results when you log on.
    If this issue still persists after above steps, I recommend you helping to do following test and let me know the results:
    Start Windows in Clean boot mode, and open Remote desktop and see what’s going on:
    How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
    http://support.microsoft.com/kb/929135  
    Keep post.
    Regards,
    Kate Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Keep getting Out of Memory error on InDesign CC 2014

    I work with 5 documents on a daily basis that can have over 150 images imported each. When I try to move around the document, it either freezes up and the wheel keeps turning or it comes up with an Out of Memory error message and locks up. It also will just quit.
    I had seen somewhere about being able to "assign" a certain amount of memory to the software using the "get info" panel, but I can't find any reference to memory on the "get info" panel.
    Any help would be greatly appreciated.
    Thanks
    CJ

    I inherited the file from a previous employee and they had lots of embedded files. I am slowly replacing them with linked as they are updated. Are linked or embedded better?

  • Out of Memory Error - not a RAM issue

    I'm using Flash 8 and am getting an out of memory error
    simply trying to copy and paste text in Flash. The error tells me
    to allocate more memory to flash by getting info on the app in the
    finder. This seems strange to me because I thought this was an OS9
    function (I'm running OSx 10.4.9). When I get info, there is
    actually a twirl down menu for Memory, but everything is grayed out
    so I can't change it (it's currently set to 512kb). I don't have
    Flash open at the time.
    Does anyone know what might be going on?
    Thanks ahead of time.
    David

    The application is downloaded from a server Tomcat and launched by Java Web start.
    The settings of the JVM are :
    <j2se version="1.6.0.4+" java-vm-args="-Xms20m -Xmx256m -XX:MinHeapFreeRatio=30 -XX:MaxHeapFreeRatio=50" href="http://java.sun.com/products/autodl/j2se" />
    So the heap can increase up to 256 Mbytes, which I think is sufficient for the application.
    Sometimes the test scenario, which sends the same messages periodically without ending, doesn't cause any problem to the application : the amount of heap it uses remains stable. The application seems to be able to run indefinitely (I let it run for a week without stop).
    Sometimes, with the same scenario, after a few runtime hours, the amount of heap used by the application increases suddenly (in a lapse of 2 or 3 minutes). The GC throws an OOM error and the application freezes. The only solution is to re-launch it.
    The behavior of the JVM and the GC is beyond understanding to me.
    Should I change the tuning parameters of the JVM ?
    Would it be a solution to set the Xms and Xmx parameters to the same value, for example 246 MBytes.
    Are there other parameters of the JVM that could improve the running of the application ?

  • Possible "Out of memory" error  during XSLT ?

    Hi ,
    I am working on 11gR1.
    In my project I am reading a file in batches of ten thousand messages.
    The file is getting read and archived and I can see expected number of instances getting created in the console.
    But nothing useful is visible inside the instance as the link for BPEL process is not appearing.
    (I have kept audit level as production but even in this case, atleast link should appear)
    When I checked the logs , it indicated that transaction was rolled back due to out of memory error.
    Just before this error, there is a reference to the xsl file which I am using :
    [2010-12-13T08:42:33.994-05:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.bpel.engine.xml] [tid: pool-5-thread-3] [userId: xxxx] [ecid: 0000InVxneH5AhCmvCECVH1D1XvN00002J,0:6:100000005] [APP: soa-infra] [composite_name: xxxx] [component_name: xxxx] [component_instance_id: 560005] [composite_instance_id: 570005] registered the bpel uri resolver [File-based Repository]oramds:/deployed-composites/xxxx_rev1.0/ base uri xsl/ABCD.xsl
    [2010-12-13T08:46:12.900-05:00] [soa_server1] [ERROR] [] [oracle.soa.mediator.dispatch.db] [tid: oracle.integration.platform.blocks.executor.WorkManagerExecutor$1@e01a3a] [userId: <anonymous>] [ecid: 0000InVuNCt5AhCmvCECVH1D1XvN000005,0] [APP: soa-infra] DBContainerIdManager:run() failed with error.Rolling back the txn[[
    java.lang.OutOfMemoryError
    My question is , is there any limit on how much payload can oracle's xslt parser handle in one go ?
    Is decreasing the batch size only possible solution for this ?
    Please share your valuable inputs ,
    Ketan
    Is there any limit on how many number of the elements xslt parser can handle ?
    I am reading a file in batch of 10 thousand messages per file. (Each recordsa has some 6-8 fields)
    The file is getting picked up but the instance does not show anything.

    > I'm getting out of memory errro during system copy import for Dual stack system (ABAP & JAVA).
    >
    > FJS-00003  out of memory (in script NW_Doublestack_CI|ind|ind|ind|ind, line 6293
    > 6: ???)
    Is this a 32bit instance? How much memory do you have (physically) in that machine?
    Markus

  • A FIX for error message: When I try to open Snood (it's a game) I get this message.  Not enough memory {Error # :: 0, in sound.cp@line 101  Can you help?

    After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
    with 4 GB of memory when opening Snood:  Not enough memory {Error # :: 0, in sound.cp@line 101
    My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
    Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
    I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
    They thought the issue was in Mac's system preferences/ Sound. It was.
    I didn't realize that my sound input and output devices were gone.
    The fix was resetting the PRAM. I found this advice on MacFixIt.com.
    MacFixIt help with volume:   http://reviews.cnet.com/8301-13727_7-10415659-263.html
    Resetting the PRAM is on Apple support:   http://support.apple.com/kb/HT1379
    My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
    Thank you to Snood, MacFixIt and Apple.
    Happy new year all!

    Good work, nice post/tip, thanks!

  • Acrobat XI Pro "Out of Memory" Error.

    We just received a new Dell T7600 workstation (Win7, 64-bit, 64GB RAM, 8TB disk storage, and more processors than you can shake a stick at). We installed the Adobe CS6 Master Collection which had Acrobat Pro X. Each time we open a PDF of size greater than roughly 4MB, the program returns an "out of memory" error. After running updates, uninstalling and reinstalling (several times), I bought a copy of Acrobat XI Pro hoping this would solve the problem. Same problem still exists upon opening the larger PDFs. Our business depends on opening very large PDF files and we've paid for the Master Collection, so I'd rather not use an freeware PDF reader. Any help, thoughts, and/or suggestions are greatly appreciated.
    Regards,
    Chris

    As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

  • Acrobat XI Pro "Out of Memory" error after Office 2010 install

    Good Afternoon,
    We recently pushed Office 2010 to our users and are now getting reports of previous installs of Adobe Acrobat XI Pro no longer working but throwing "Out of Memory" errors.
    We are in a Windows XP environment. All machines are HP 8440p/6930p/6910 with the same Service pack level (3) and all up to date on security patches.
    All machines are running Office 2010 SP1.
    All machines have 2GB or 4GB of RAM (Only 3.25GB recognized as we are a 32bit OS environment).
    All machines have adequate free space (ranging from 50gb to 200gb of free space).
    All machines are set to 4096mb initial page file size with 8192mb maximum page file size.
    All machines with Acrobat XI Pro *DO NOT* have Reader XI installed alongside. If Reader is installed, it is Reader 10.1 or higher.
    The following troubleshooting steps have been taken:
    Verify page file size (4096mb - 8192mb).
    Deleted local user and Windows temp files (%temp% and c:\WINDOWS\Temp both emptied).
    Repair on Adobe Acrobat XI Pro install. No change.
    Uninstall Acrobat Pro XI, reboot, re-install. No change.
    Uninstall Acrobat Pro XI Pro along with *ALL* other Adobe applications presently installed (Flash Player, Air), delete all Adobe folders and files found in a full search of the C drive, delete all orphaned Registry entries for all Adobe products, re-empty all temp folders, reboot.
    Re-install Adobe Acrobat XI Pro. No change.
    Disable enhanced security in Acrobat XI Pro. No change.
    Renamed Acrobat XI's plug_ins folder to plug_ins.old.
    You *can* get Acrobat to open once this is done but when you attempt to edit a file or enter data into a form, you get the message, "The "Updater" plug-in has been removed. Please re-install Acrobat to continue viewing the current file."
    A repair on the Office 2010 install and re-installing Office 2010 also had no effect.
    At this point, short of re-imaging the machines (which is *not* an option), we are stumped.
    We have not yet tried rolling back a user to Office 2007 as the upgrade initiative is enterprise-wide and rolling back would not be considered a solution.
    Anyone have any ideas beyond what has been tried so far?

    As mentioned, the TEMP folder is typically the problem. MS limits the size of this folder and you have 2 choices: 1. empty it or 2. increase the size limit. I am not positive this is the issue, but it does crop up at times. It does not matter how big your harddrive is, it is a matter of the amount of space that MS has allocated for virtual memory. I am surprised that there is an issue with 64GB of RAM, but MS is real good at letting you know you can't have it all for use because you might want to open up something else. That is why a lot of big packages turn off some of the limits of Windows or use Linux.

  • Memory Error Neo2 Pt 4*512 DDR 400 or even 333

    Ok, this board has started giving me a lot of problems. 1 week ago all was fine, and suddenly I started getting BSODs. Last friday the computer shut off after a BSOD, while I was just browsing the internet.
    Affter that it failed to start and gave a BSOD on every boot.
    Then it started automatically again. And woked well.
    On sat the system wont start and gave long beeps, indiicating memory error.
    4*512 Ballistix default spd.
    so I reset my BIOS, upgraded bios to 1.A ballistix edition, as syar suggested.
    Computer ran well / rebooted well.
    but when I did a cold start sunday morning I got long beeps again. Even resetting the BIOS did help. Got long beeps.
    I took 1 module out and the system started well. went into the bios and manually set bus to 333 rather than 400, default spd timings.
    Computer started well. I put the 4th module back in, and all worked well till I did a cold boot today, and back to continuos beeps.
    Now the only way the computer works if I just use 2 memory modules.
    I tried manual voltage, manual timings, spd timings, timings on crucial's site, voltage on crucials site. No luck.
    currently i am on 2*512 dimm 1-2, default spd and voltage and system seems to work.
    whats the prob ? Is my memory bad, which I am not too sure off, bcos I tried running 2 modules at a time from the 4 matched pair, and tey seem to work.
    Only the all 4 wont work, and 3 in also gives problem.
    is this motherboard messed up ?
    bcos I am really thinking of switching to a diff platform as since day 1, less than 1 month ago, this mobo is giving me probs with X2 dual core.

    https://mywebspace.wisc.edu/phora/web/cpuz.htm
    Alright, I updated the BIOS to the latest beta, modded by side effect.
    put back the 4 modules in, and they are running now
    2-2-2-7 DDR 400 2.8V
    though the HT is 3x unlike all previos times when it was 5x...anything to do with the probs ?
    anyways, I still dont know how long this config will last, for I have has successful bootups in the past, but they end up failing later.

  • RoboHelp 9 gives an out of memory error and crashes when I try to import or link a Frame 10 file or

    I have Tech Suite 3. If I start a new RoboHelp project and try to import or link Frame files, RoboHelp tries for a while, then I get an Out of Memory error and the program crashes.
    I opened one of the sample projects and was able to link to one of my frame files without any problem, so it seems to be an issue with creating something new.
    Any suggestions?

    It happens when I create a new project and then try to import or link frame docs to make up the content. It starts scanning, then crashes. I did get it to the conversion setting page once, but no further.
    It does not happen if I open one of the supplied example projects and link a file. But then it doesn't let me choose, during import, any style mapping. And I can't delete the sample project fold
    Twice now it has told me when I tried to import (not link, but import) that my .fm file could not be opened, and told me to verify that Frame is installed (it is) and that the file is a valid frame file (it is).
    The docs and project are in separate folders on my C: drive.

  • Low memory errors.

    When I ty to play Destination Treasure Island I get a low memory error message. Is this bad? Could my iPad be bad? If I reboot the iPad it starts and lays but I haven't played for hours at a stretch yet either.
    Should I be concerned?
    Thanks.

    Multi-tasking happens in 4.2, it's not something that can be switched on/off (which not everyone likes). The only thing that you can do is go into the task bar (double-click the home button) and close other apps manually (press and hold one of them until they start to shake, then press the '-' in their top left corenr; press home, or touch the non-taskbar part of the screen when finished closing them). The task bar shows recently used apps as well as those that are running, so even if an app appears there it doesn't necessarily mean that it is active.

  • Low memory error message - shut down app

    Last 2 days, I keep getting low memory error message and asking me to close CS Suite application, or it closes on me.

    Details, OS, RAM, free disk space, scrach disk space, etc.

  • Memory Error in Bridge while running a script with multiple moveTo()'s.

    I have written a script to create folders based on the names of assets in the parent folder, then move the assets with matching names into the appropriate folders. The script runs perfectly up to somewhere between 1,000 to 1,500 images moved and then I receive a memory error from Bridge.
    I have been running this on folders with an excess of 25,000 assets in them. My work around was to put a simple counter in the script to let me know when 1,000 assets had been moved, throw up an alert, and then I would view the Task Manager to let me know when the CPU usage had dropped below 50% and would ok the alert, then it would run the next 1000 assets.
    My question, is it possible in scripting to monitor your memory usage to allow a pause in the script so Bridge processing can catch up?

    Don't do that!
    $.sleep() doesn't "sleep". ExtendScript is not multi-threaded. $.sleep just waits on the $.sleep() command to execute. It actually blocks all processing rather than free up the processor to do things like garbage collection.
    First try the $.gc() command. To my knowledge there is no way to track ES' memory usage.
    If that doesn't work, try scheduling a task...
    Let's say that you find that after 1000 moves, it takes 60 seconds for the processor to cool off:
    doAThousandMoves = function() {
    // execute 1000 moves
    app.scheduleTask( "doAThousandMoves()", 60000, true );
    The way I would actually code this is to scan the folder tree and create a global array that contained all of the files to be moved.
    I would then move them 1 at a time, shifting them off the array. Something like this:
    var mover = {}; // global object declaration
    mover.init = function() {
    mover.files = new Array();
    // fill mover files with the file objects to be moved.
    app.scheduleTask( "mover.move()", 10 );
    mover.move = function() {
    var i = 0;
    while ( i++ < 1000 ) {
    file = mover.files.shift();
    // move file
    if ( mover.files.length > 0 ) {
    app.scheduleTask( "mover.move()", 60000 );
    In fact, you should probably break this into chunks of about 10 or so at a time (you can reduce the gap between calls). Doing so will make the operation appear to be running as a background process.
    Regards
    Bob

  • Memory error when executing package through SQL Server Agent.

    Hi!!
    I have a problem with a package (SSIS) when run on SQL Server Agent.
    The job is configured
    with the proxy and the account has the
    required privileges. Runs perfectly
    if the job runs manually, but if I let it
    run on schedule I get a memory error.
    Also if I run the
    package through DTExec.exe or VS2008,
    everything runs smoothly.
    I am using SQL2008R2.
    If someone has something similar happened
    and have found how to fix it please i need
    to know how.
    Thank you.

    This is most likely your issue:
    http://support.microsoft.com/kb/824422

Maybe you are looking for