Freezing Rows and Columns Question

In a spreadsheet I have Row 1 Frozen as a Header row for descriptions and headings of different columns of expenses
Is it possible to Freeze the very bottom row of all the totals? I am imagine that you could scroll up and down all the rows in between, but always see the decriptions at the Top Header Row and the Totals at the Bottom Row
Is this possible?
thanks
MS

Trackpad vs Mouse is just a matter of getting used to using the one you will use.
Your profile indicates OS X v10.8 (Mountain Lion), so this answer applies to Numbers '09.
With a trackpad, start by selecting the columns or rows you want to move. Click any cell to activate the table, then position the pointer over the tab of the first column to be selected. If the pointer changes to a vertical line crossed by a double headed arrow, shift it slightly until it changes bck to the selection pointer (black arrow pointing up and left). Then click and drag across the column Header tabs to select the columns.
When the columns are selected, move the mouse pointer to a position just to the left of the letter labeling the first selected column. With the pointer positioned there, use your thumb to press and hold the mouse button/trackpad down, then use a finger to drag the columns down until they 'detach' from the table. Change the direction of drag to move the detached columns to the location where you want them. When the boundary showing where you want to places the columns changes to a thick blue line, release the mouse button/track pad (lift your thumb, but not your finger) to drop the columns into position.
Rows:
Change:
"vertical line crossed by a double headed arrow" to "horizontal line..."
"Drag across the column tabs..." to "Drag down the row tabs..."
"Drag the columns down until..." to "Drag the rows right until..."
Otherwise the same instructions.
Regards,
Barry

Similar Messages

SSRS Report Freezing row and column while scrolling Issue

Hello,
I have created the report and i have freezed the row and column of the report while scrolling [To Freeze made the changes in tabulex property of the table "Keep Header visible while scrolling"]
meade the changes in the property [Advaned Mode]
Fixed Data= true
Keep Together=true
Keep with group =After
Report on new page=true
When ever i will scroll down my report my all column headder will remains same. after that if i scroll to right my first freeded column headder will not display [group column or freezed row headder].
COuld you please suggest me for the same issue.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to freeze row and column in JTable

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Trouble Freezing Row and Column Headers

I have created a report in HFR that is rather large. I need to freeze the row and column headers so that when I do a web preview, they are frozen and I can still see the headers when I scroll right or left or up and down. I have clicked on "Freeze Grid Headers" under the General tab on the Grid Properties sheet, but it only freezes my row headers and not my column headers. How do I get the column headers to freeze as well?
Any help is greatly appreciated.

there is nothing to do with servelts to solve thisCorrect. You may use IFRAME element on your page.

Freezing rows and columns.

I need to know how to freeze the top row and the left column so when you scroll down or left to right that row and column of information stays visible. Can't seem to find in user guide. Thanks in advance.
Dave

As the feature is unavailable, it is normal that it is not described in the Help or in the User Guide.
Some users wrote that we may mimic it activating the mode: "Show Print View".
I'm not sure that it is really what you want.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE dimanche 28 décembre 2008 16:28:33)

To freeze row and column in a view.

Hi,
Can anyone advise that is there any way where we can freeze a row and a column in a view.
Many Thanks,
Kate

JTextArea has a replaceRange method.
John

Report Writer Row and Column Format

Hi
Was wondering if there is a possible solution to this :-
Understand that column format is controlled by format groups. This means that all figures in the same column will take the same format (such as scaling and decimal place).
Scenario is ->
                    Colunn #1 -> column set as displaying no decimal point
Rev                  120
OP                      5
OP margin %     4.2 -> how to set this to 1 decimal point. Any formula syntax that I can use?
Regards.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Table name input. and output i need all rows and columns using procedures

hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To All

An example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
                                     ,p_dir IN VARCHAR2
                                     ,p_header_file IN VARCHAR2
                                     ,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val     VARCHAR2(4000);
v_n_val     NUMBER;
v_d_val     DATE;
v_ret       NUMBER;
c           NUMBER;
d           NUMBER;
col_cnt     INTEGER;
f           BOOLEAN;
rec_tab     DBMS_SQL.DESC_TAB;
col_num     NUMBER;
v_fh        UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
    CASE rec_tab(j).col_type
      WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
      WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
      WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
    ELSE
      DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
    END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
    v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
    UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
    v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
    v_ret := DBMS_SQL.FETCH_ROWS(c);
    EXIT WHEN v_ret = 0;
    v_finaltxt := NULL;
    FOR j in 1..col_cnt
    LOOP
      CASE rec_tab(j).col_type
        WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
                    v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
        WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
                    v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
        WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
                    v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
      ELSE
        v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
      END CASE;
    END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
    UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.

Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Row and column headings

How can I keep my row and column headings fixed on the screen while I scroll through the rest of a large spreadsheet?

Choose Freeze Header Rows in the Table Format pane.
Jerry

Hiding row and column headings in excel

How do I head the row and column headings in excel in docs to go? I have a Q10 and there just isn't enough screen space to also have the letters across the top, and the numbers down the side. How do I get rid of them so I just have the actual spreadsheet itself?
Desktop excel does have this functionality.
David

Choose Freeze Header Rows in the Table Format pane.
Jerry

Arrays[][] - row and column

Evening All...
Just a quick question regarding arrays. My program is working but I am trying to tidy it up.
public class Arrays{
static int firstArray[][]= new int [][] {{8,5},{9,3}};
static int secondArray[][]= new int [][] {{1,7},{4,8}};
static int thirdArray[][]= new int [][] {{0,2,4},{9,6,8}};
     static int fourthArray[][]= new int [][] {{2,1,0},{6,2,3}};
public static void main(String[] args)
     multiply(secondArray,firstArray);
     multiply(firstArray,thirdArray);
     public static void multiply( int[][] x, int[][] z)
     int array2[][] = new int [3][3];
     int 1r = x.length;
     int 1c = x[0].length;
     int 2r = z.length;
     int 2c = z[0].length;
     //for(etc...)
//      (Rest of program)
I want to edit the array.--------int array2[] = new int[3][3]; (up 9 lines)
Instead of specifying it as [3][3] for size.
I would like to say new int - length of row and column - im pretty sure it is similar to
the ints below - but cant seem to get the correct combination.
Thanks in advance for any help folks.

- you can use variables to specify array dimensions
- you can get the (1D) dimension of an array by using the "attribute" theArray.length . Knowing that a 2D-array is indeed an array of arrays, you can indirectky get the size oif the second dimension too:
public static void multiply( int[][] x, int[][] z)
int array2[][] = new int [x.length][x[0].length];
}Of course this shoud be robustified to protect against x or x[0] being null (but in this case the multiplication is probably doomed anyway).
Regards,
J
Edited by: jduprez on Mar 14, 2011 10:45 PM
And please, in the future, use tags around code text, when posting code

Freezing Rows and Columns Question

Similar Messages

Maybe you are looking for