SSRS Report Freezing row and column while scrolling Issue

Hello,
I have created the report and i have freezed the row and column of the report while scrolling [To Freeze made the changes in tabulex property of the table "Keep Header visible while scrolling"]
meade the changes in the property [Advaned Mode]
Fixed Data= true
Keep Together=true
Keep with group =After
Report on new page=true
When ever i will scroll down my report my all column headder will remains same. after that if i scroll to right my first freeded column headder will not display [group column or freezed row headder].
COuld you please suggest me for the same issue.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Report Writer Row and Column Format

Hi
Was wondering if there is a possible solution to this :-
Understand that column format is controlled by format groups. This means that all figures in the same column will take the same format (such as scaling and decimal place).
Scenario is ->
                    Colunn #1 -> column set as displaying no decimal point
Rev                  120
OP                      5
OP margin %     4.2 -> how to set this to 1 decimal point. Any formula syntax that I can use?
Regards.

Hi Vinay,
Based on my research, freezing row and column headers are different in table and matrix.
In a table, if we want to freeze column header, we should make the changes in the first Static row group in Row Groups pane with Advanced Mode as you said. If we want to freeze row header, the table should have a group ahead, then we can enable “Repeat header
rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
In a matrix, if we want to freeze column header, we can enable “Repeat header columns on each page” and “Keep header visible while scrolling” options in Column Headers in Tablix Properties dialog box. If we want to freeze row header, we can enable “Repeat
header rows on each page” and “Keep header visible while scrolling” options in Row Headers in Tablix Properties dialog box.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Trouble Freezing Row and Column Headers

I have created a report in HFR that is rather large. I need to freeze the row and column headers so that when I do a web preview, they are frozen and I can still see the headers when I scroll right or left or up and down. I have clicked on "Freeze Grid Headers" under the General tab on the Grid Properties sheet, but it only freezes my row headers and not my column headers. How do I get the column headers to freeze as well?
Any help is greatly appreciated.

there is nothing to do with servelts to solve thisCorrect. You may use IFRAME element on your page.

Freezing rows and columns.

I need to know how to freeze the top row and the left column so when you scroll down or left to right that row and column of information stays visible. Can't seem to find in user guide. Thanks in advance.
Dave

As the feature is unavailable, it is normal that it is not described in the Help or in the User Guide.
Some users wrote that we may mimic it activating the mode: "Show Print View".
I'm not sure that it is really what you want.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE dimanche 28 décembre 2008 16:28:33)

How to freeze row and column in JTable

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Hi,
I need to freeze first two rows and columns in a large JTable. I found ways to freeze either a row or a column, but not both at the same time.
Can any of you help ?
Found this code which allows freezing a col. Similar method can be used to freeze column
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JViewport;
import javax.swing.table.DefaultTableModel;
import javax.swing.table.JTableHeader;
import javax.swing.table.TableModel;
public class FrozenTablePane extends JScrollPane{
public FrozenTablePane(JTable table, int colsToFreeze){
super(table);
TableModel model = table.getModel();
//create a frozen model
TableModel frozenModel = new DefaultTableModel(
model.getRowCount(),
colsToFreeze);
//populate the frozen model
for (int i = 0; i < model.getRowCount(); i++) {
for (int j = 0; j < colsToFreeze; j++) {
String value = (String) model.getValueAt(i, j);
frozenModel.setValueAt(value, i, j);
//create frozen table
JTable frozenTable = new JTable(frozenModel);
//remove the frozen columns from the original table
for (int j = 0; j < colsToFreeze; j++) {
table.removeColumn(table.getColumnModel().getColumn(0));
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
//format the frozen table
JTableHeader header = table.getTableHeader();
frozenTable.setBackground(header.getBackground());
frozenTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
frozenTable.setEnabled(false);
//set frozen table as row header view
JViewport viewport = new JViewport();
viewport.setView(frozenTable);
viewport.setPreferredSize(frozenTable.getPreferredSize());
setRowHeaderView(viewport);
setCorner(JScrollPane.UPPER_LEFT_CORNER, frozenTable.getTableHeader());
}

Freezing Rows and Columns Question

In a spreadsheet I have Row 1 Frozen as a Header row for descriptions and headings of different columns of expenses
Is it possible to Freeze the very bottom row of all the totals? I am imagine that you could scroll up and down all the rows in between, but always see the decriptions at the Top Header Row and the Totals at the Bottom Row
Is this possible?
thanks
MS

Trackpad vs Mouse is just a matter of getting used to using the one you will use.
Your profile indicates OS X v10.8 (Mountain Lion), so this answer applies to Numbers '09.
With a trackpad, start by selecting the columns or rows you want to move. Click any cell to activate the table, then position the pointer over the tab of the first column to be selected. If the pointer changes to a vertical line crossed by a double headed arrow, shift it slightly until it changes bck to the selection pointer (black arrow pointing up and left). Then click and drag across the column Header tabs to select the columns.
When the columns are selected, move the mouse pointer to a position just to the left of the letter labeling the first selected column. With the pointer positioned there, use your thumb to press and hold the mouse button/trackpad down, then use a finger to drag the columns down until they 'detach' from the table. Change the direction of drag to move the detached columns to the location where you want them. When the boundary showing where you want to places the columns changes to a thick blue line, release the mouse button/track pad (lift your thumb, but not your finger) to drop the columns into position.
Rows:
Change:
"vertical line crossed by a double headed arrow" to "horizontal line..."
"Drag across the column tabs..." to "Drag down the row tabs..."
"Drag the columns down until..." to "Drag the rows right until..."
Otherwise the same instructions.
Regards,
Barry

To freeze row and column in a view.

Hi,
Can anyone advise that is there any way where we can freeze a row and a column in a view.
Many Thanks,
Kate

JTextArea has a replaceRange method.
John

Keeping row and column headers while scrolling inside a Web Dynpro table

Hi,
I have to display a 2x2 matrix with storage location names on the x-axis (i.e. as Column Headers) and material names on the y-axis (i.e. row headers). The table data represents the quantities of a particular material in a particular storage location.
I am using dynamic UI generation to create this table. It can contain as many as 150 columns and almost as many rows. I dont want a page level scrollbar, and hence, have placed my table inside a scroll container UI element with a fixed height and width.
I need a way to let the users use the scrollbars inside the scroll container, but still let them see the row and column headers. Is there a way that I can do this in Dynpro for Java?
Thanks,
Navneet Nair.

Hi Kenn,
You are probably better off posting this request in this forum User Interface Development in ABAP as you are more likely to get a response.
Cheers,
Neil.

Lock rows and columns header in a table view report. It is possible?

hi,
I have a Dashboard that displays a report in "Table View" with many rows and columns.
Is it possible to set a lock on the rows and columns like Excel?
This would have blocked such headers that contain attributes and measures and to browse the report (eg with a scroll bar) had always viewed the headers.
Can you help me?
Thanks

hi,
please go through this discussion
Re: SCROLL BAR to FREZZ HEADERS
thanks,
saichand.v

XL reporter error occurred while executing report! Rows: 25203 Columns: 30

An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny

Navigation on row and column total in pivot report

Hi All,
I have created a pivot report with 2 dimension columns and one measure and defined row and column total. Now, users wants to have a navigation report on the row/column total so that once he clicks on total value, he can see the detail report. While doing this, he also wants to pass on the 2 dimension column values to detail report.
Is there any workaround for this?
Thanks in advance.

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Report with multiple dimensions in Row and Column with EvEXP

Hi
We are currently running BPC 7.0 SP3 and try to create the report(or schedule) with more 2 x 2 dimensions in the row and column.
e.g.
row dimension : Outer row is Entity, Inner row is Account
column dimension : Outer column is Time, Inner row is Category
We created the report with 2 x 2 dimensions like above e.g. with EvEXP and EvNXP, NOT EvDRE
based on default dynamic template:Template13.xlt(Nested Row, 2 x 1 dimensions defined by EvEXP and EvNXP formula).
However, when expanding the dimension with double click these dimensions or change CV of the report with 2 x 2 dimensions defined by EvEXP and EvNXP formula,
error occurs on EvEXP and EvNXP formula and can't retrieve the result correctly.
[Question]
Can't we create the report with more 2 x 2 dimensions in the row and column using EvEXP and EvNXP function ?
We understand that we can make the report with more 2 x 2 dimensions in the row and column if using EvDRE.
Thank You in advance
Kenya

Thank you for your advice.
I understand that we should use EvDRE when creating the report with multiple dimension in the row/column　because EvEXP have some erros, poor performance, etc.
Then, we have two questions.
1)
>plus they had some errors in the designs.
what kind of errors they have as an example?
2)
>If you must build the EVEXP and EVNXP, I would suggest building the template from scratch
We built the simple template with just 2 x 2 dimension from scratch.
But this report doesn't work well when double-click the dimension or changing CV...
Would you please check the following template?
<https://sapmats-de.sap-ag.de/download/download.cgi?id=RCZE1ME4YSORY3DCDO4NNMANZLBL1L5ZBUOB2F71YVNVS8XDJW>
It would be greatly appreciated if you could give me your advice for the template.
Thank you again
And my best regards,
Kenya

Limitation of row and column in FR report

Hi all,
i want to know what is the maximum number of row and column that we can display in FR report.
and is there any possibility to increase the number of row and column in FR reports,if yes then how?
Thanks in advance.

Hi Andy,
I think your asking if this or something similar could be used to go to another page rather than as a popup? The answer is yes. since you have already done the decode in your query, you can just go to the Report Attributes tab (I'm using version 2.2.1.00.04) and click the edit button for the column. Then, you can simply go to the
HTML Expression [Insert column value] text area and insert:
<!--
<b>#A#<b>
This will give you everything that is in the column link section, but I find it easier to work with since it's all together (personal preference).
I reread your post and realized that you wanted to pass the A as a value and not the summary value of the column. I simply removed the #'s. I think this should work. I also kept the summary value using the #A# as the link. I belive that you can copy and paste this into each column (replacing the A with the appropriate column header of course...).
If I were doing this I might create a CASE statement in the query and evaluate for null before creating the link. Here is an example of using that approach:
CASE WHEN "STATUS" = 'U' AND ("CREATEDBY"=:APP_USER OR :APP_USER='MY_USER')
THEN ''
|| '<img src="#WORKSPACE_IMAGES#edit.gif" border="0" alt="Click here to Edit">'
|| ''
ELSE ''
END LINK,
Neil

Row and Column Template in Hyperion Reporting

Hi
Whenver I am trying to save a column of a report as a template , it is giving an error :
"The selected columns contain one or more of the items below that cannot be included in templates:
Invalid Input "
I am not sure what does this mean. Though I have already deselected the "Link to Source Object". Can anyone suggest ?

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

SSRS Report Freezing row and column while scrolling Issue

Similar Messages

Maybe you are looking for