Frieght Charges not added up during invoice

Hi Everyone
My client is not able to find the freight charges while doing an invoice, how ever the freight charges are included while creating a sales order.
Its only when while doing an invoice the freight charges does not show up
Please advice as how to proceed further
Thanks

Dear Srinivasan,
Please check the pricing procedure in the invoice and in the sales order is it defferent from the sales order then you need check the copy comtrol settings between delivery and invoice through VTFL transaction.
Go to VTFL transaction here you select your delivery and billing types then go in to the item level settings by selecting itemcategory here you can find the field Pricing type check the settings in this field.
If you want same price should be carrry out to invoice maintain as D -Copy pricing elements unchanged
I hope this will help you,
Regards,
Murali.

Similar Messages

Reg. WIP Charges not added with Raw material cost

Dear Sir
In BOM Header material SEMIFINISHED(CUTPCS) is attached and component material FABRIC -Raw material is attached,and then in MIGO using 261 Mvt type we are issuing fabric against production order,next using 101 Mvt type receiving CUTPCS now the cutting charge is not added with FABRIC only FABRIC cost is coming during Goods receipt. this is our serious problem.
Please help me.
Thanks
Rajakumar.K

Not answered

Reg.Debite note alert message during invoice

Dear Experts
We want an alert message during Invoice against Purchase order that "Debite note is raised" if I created debit note advise in F-41. what I should do. Pls advise.
Thanks
Rajakumar.K

Dear All
I solved my problem myself. Thanks
I made an entry in MIRO with the option "Credit memo" and made payment to vendor the balance amount only will come deducting the debit amount from vendor.
Thanks
Rajakumar.K

Reg.Debite note alert message during invoice MIR7

Dear Experts
We want an alert message during Invoice against Purchase order that "Debite note is raised". what I should do. Pls advise.
Thanks
Rajakumar.K

Dear Expert
I have one idea,but I don't know how far it is ok,
in vendor master one option is there that Payment block where if I select blocked for payment during control the debit note. If I do so,I will get the message during invoice that the payment is blocked like then, then I have to change the Payment block to Free for payment.
I changed the Payment block to Blocked for payment which was not working while invoice.
Pls advise
Thanks
Rajakumar.K

Add frieght charges to a pro forma invoice

How do you add freight charges to a pro forma invoice?
Thanks,
Sean

HI,
Generally Freight charges are determined in delviery document and then from here it will be copied into billing if you want.
But directly if you want to add into proforma billing then u need to maintain these condition types in proforma pricing procedure and make a setup in copy contol picing type field then redetermine the pricing in proforma invoice..
Regards
sankar

A/P invoice is not adding!

My client is working on SAP B1 8.81 PL05 which was upgraded few days back from 2007B PL14,Since than A/P invoice is not adding and giving the following error message "Enter valid Currency: 4310040000 ms2-173-57)
Please suggest me!
Thanks.........

Hi.......
Welcome to SAP Business One Forum.......
or your solution, You need to set the GL Account Currency to All Currencies.
Do one thing make all the GL Account Currencies in Charts of Account Master as All Currencies. This may solve your problem.
Before finally implement just try it in test DB.......
Regards,
Rahul

Vendor Text / Internal notes during Invoice creation

Hello,
We can create user ID for a Vendor contact using "Employee for Business partner" under "Manage Business partner" option.
With this user ID, while trying to create an Invoice, Vendor text / Internal notes drop down does not appear under "Document tab" at item level. We only see one option "Comments from Vendor".
But during invoice creation by a regular user , we see the drop down for "Vendor Text / Internal notes". We dont see the option "Comments from Vendor"
Question : Is it possible to have the "Vendor Notes / Internal notes" drop down made available for Vendor Contacts just like reuglar users?
FYI - We are using Standalone scenairo.
Thanks for your reply in advance.
Regards,
UM.

Hi Jon,
Like said Yann, try to use BBP_DOC_CHECK badi.
In this badi You can use FM BBP_PD_SC_GETDETAIL.
Example:
call function 'BBP_PD_SC_GETDETAIL'
    exporting
      i_guid     = iv_doc_guid
    importing
      e_header   = wa_e_header
    tables
      e_item     = e_item
      e_account = e_account
      e_longtext = e_longtext
      e_messages = e_messages.
This FM show You all longtext attached in document.
Regards,
Marcin Gajewski

Frieght charges include for particular customer and also include in invoice

Hi,
How to include frieght charges for the particular customers towards freight charges recovered from them. Credit into Freight Charges received (GL account No: 310010 ).
Frieght amount should shown in invoice also.
How to do that above issue.
Please help me to resove this issue.
Thanks,
Suresh

Hi,
maintain condition type kf00 for fright in your pricing procedure as a manual condition and maintain condition record for combition customer in vk11 or give in sales order manually.
g/l account part u need to maintain separate g/l account for fright in vkoa transaction.
Best regards
Srinivasyadav

Frieght Charges Booking

Dear Friends,
we created PO and added fright Charges for a vendor for Rs. 100. and GR/IR also done while doing MIRO with Vendors Bills showing the Frieght Charges is Rs. 200/- how will settle this.
please advice
Thanks
Rajesh G

Hi,
please try posting the MIRO document with the variant planned delivery costs (since you created the PO with frieght conditions) then system will only take the frieght , if the variant is items+delivery costs it will take the entire amount.please check wheather you have posted the MIRO with the second option.
If you want to post additional frieght other than there in the PO, post them as unplanned during MIRO.If not you can post them by subsequent settlement.
Regards,

Unplanned delivery cost to material through G/L account during Invoicing

Hi,
We have a problem of capturing unplanned delivery cost to material
The scenario is as follows
We are not sure of few conditional value's during Purchase Order creation.
We come to know only during Invoice verification,
These conditions might be many, like labor Charges,Unloading Charges etc which should go to material.
Though we can post it to material directly with reference to PO,we will not be knowing the purpose of posting,as the client wants the complete landed cost including these.
And if we post it to a G/L account it does not go to material,Even if we set up UPF key, it still goes to G/L account only.
Is there any way to post to material via G/L Account,as we want to give G/L account as reference to those conditions.
Thanks and Regards
W.Raghuram

hi
there r two options either the cost will distribute to the items or it will come to some different acct
now u can set this
Spro > MM >Logistic Invoice verification > Incoming Invoice > Configure how unplaned delivery costs are posted.
here select appropriate option
if u want it to be loaded on material then select distibute among line items
if u want diff acct then chose 2nd option
if u want diffrent gl acct for diff types of delivery cost then u can directly activate the direct posting to gl acct
Spro > MM >Logistic Invoice verification > Incoming Invoice > Activate Direct Posting to G/L Accounts and Material Accounts
then u will find a G?L acct tab
here u can directly debit a amount to an acct
regards
kunal

Rg: Frieght Charges

Hi all,
Below is the requirement for freight
After creating a PO without frieght charges (because they do not know what will be the mode of transport), each transport cost are different and the delivery of po make take 3 months.
The mode of shipment can be known during shipement notification which we enter during vl31n or during goods receive. Based on the mode of transport,like half truck load cost less, where as full load cost more.
How we can track this freight charges apart from po..i think just condtions types in po won't work.
Your input will be helpful for me.
Thanks & Regards,

Hi,,
Thanks for the input.
But the real probelm is that we need to maintain them in shipement notification. i.e we need to track this all way along inventory.
we nned to know which type of movement it is allowed.
Will the shipment VT01n will work.
Thanks & Regards

Error on adding A/P Invoice

Hi Experts,
I have encountered some problem on adding A/P Invoice (copy from Goods Receipt-PO). The error is u201CInventory Account is not defined, u2018ITEM001u2019 [Message 173-77]. This item 'ITEM001' is Set by GL Account by ITEMGROUP (at ITEM Master). I have already checked the Item Group that attached on this item and we don't see anything wrong on our configuration. And this specific item only have problem on adding AP Invoice.
The ItemGroup that attached on item ITEM001 have Inventory Account and Allocation Account entry already. Please help me guys how to solve this issue....
Thank You So Much.
Jon

Hi Jon,
Check also in
1. Administration->Setup-> Financial->G/L Account Determination
2. Administration->Setup-> Inventory->Warehouses-> Accounting Tab (your selected warehouse in transaction)
3. Administration->Setup-> Inventory->Item Groups-> Accounting Tab
Thanks
Sachin

Excise Part-2 is not getting updated during the MIGO

Dear Experts,
When I am doing GR (MIGO), I am selecting the Excise posting transaction in "Excise" header tab as "Capture & Post Excise Invoice".
But, here after posting the GR, only Part-1 is getting updated. Part-2 is not updating. Moreover, if I try to post the same vendor excise invoice in J1IEX, it is giving the error as " Part-1 not yet posted even though Part-1 is updated. Can any body suggest what is the root cause for the same?
One more thing is, once I select "Only Capture Excise Invoice" during GR, in the normal process Part-1 is updating and I'll be able to post the Part-2 in J1IEX. There is no issue. But, I can't be able to post the Part-2 during GR.
Note: I am receiving the goods against with the STO. And, we are paying the customs against with the STO. After paying the Customs Invoice, we are receiving the goods into our manufacturing Plant from logical plant.
Thanks in advance for your action!!!!
Regards,
Satya
Dear

Hi Ashok,
I went through the above note. It explains the causes that why the posting is not happening in J1IEX.
And, as per the solution that is in that note, if we change the status of that excise invoice from 'P' to Blank in the table J_1IEXCHDR, then Vendor excise invoice will be cancelling.
So, I guess this can't resolve my issue. Because, my issue is if I select "Only Capture Excise", the Part-1 is updating in MIGO and I am able to post the Part-2 in J1IEX. But, If I select "Capture & Post Ecxise Invoice" in MIGO, then only Part-1 is updating and even I am not able to post the Part-2 in J1IEX also as the status of the Excise Invoice is "Posted".
And, this is happening frequently during MIGO while selecting "Capture & Post Excise". So, I guess the Function Module / BADI which updates the J_1IPART2 is not getting triggered during MIGO. Once it triggers in MIGO, then Part-2 will be posting in GR itself.
Could you please let me know the standard FM / BADI which updates the Excise Invoice Part-2 (J_1IPART2). So that I'll check with my ABAPer whether it is triggering or not during the MIGO.
Thanks,
Satya

Restrict A User From Changing A Payment Term While Adding A/R Invoice

Dear Experts,
We want to restrict our users from changing payment terms while adding A/R Invoice.
We use SAP B1 2007 b.
Thanking you
Pradnya

Hi,
try below code in transaction notification procedure:
if (@object_type = '13') and (@transaction_type IN ('A', 'U'))
BEGIN
IF exists (select T0.DocEntry FROM OINV T0 Inner Join OCRD T1 on T0.CardCode=T1.CardCode Where T0.GroupNum !=T1.GroupNum and T0.DocEntry =@list_of_cols_val_tab_del)
          Begin
               SET @error = 30
               SET @error_message =N'You are not authorized to change payment terms'
          end
END
for how the transaction notification works or how to use :
check How to use Transaction Notification
Thanks,
Neetu

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

Frieght Charges not added up during invoice

Similar Messages

Maybe you are looking for