FRM-40010 error: Cannot read from .... .fmx

FRM-40010 error: Cannot read from ......... .fmx
Hi everyone,
In my formsweb.cfg file, i have an entry
[iapp]
userid=login/login@db
form=Invlogin.fmx
I attempted to launch my application from the desktop by clicking an icon that points to the URL
http://myapp:8888/forms90/f90servlet?config=iapp
and i received a FRM-40010: "Cannot read from Invlogin.fmx" error.
When i moved the file Invlogin.fmx from my development folder to the
C:\Ora9iDS\forms90 folder, the form is displayed.
What's going on and how do i get the f90servlet to look in a particular location and not just C:\Ora9iDS\forms90 as it appears to be doing.
I have included the path to my development folder in the FORMS90_PATH setting both in the registry and in the default.env file but no luck.
Thanks.

Stephen,
does your development folder has a name with a blank in it (or one of the parent directories?). If yes then locate it in a path with no blanks. There is a know problem with blanks in path names.
Frank

Similar Messages

Recovery Disk Error : cannot read from source file or disk HOW TO FIX ISSUE

I have had my satellite L655-S5096 for some time now.. I had to switch out hard-drives the other day and installed windows 7 home on it from my own disk. I tried to download all the drivers needed, but the graphics and wifi drivers never worked, so I pulled out the old toshiba disks to start from new with this harddrive.. It gets to asking me for the second disc, then the second disc gives me the the "cannot read from source file or disk PREINST8.SWM" This is from the "out of the box" setting, which is recommended. I do not know how to fix this issue besides reinstalling windows 7 from my disc and trying to get the drivers to work again.. however I shouldn't have to since I have the Toshiba recovery disks.. do I need new disks?
Yes, I also had the hard drive drivers and all of that installed.. my toshiba reads the HDD just fine.
~Drew

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

While starting up portal server gateway I get an error "cannot read from rp.keystore, unable to read the PKCS key".

The OS is solaris 8 and portal server 3. The first installation went through properly and we had installed many other applications also along with portal server. Then we had to ship the machine to some other city and restarted with same IP address, host address and domain, and also made a LAN without hooking onto the main network. From then on we are facing this problem. Even tried reinstallation a couple of times, after uninstall and deleting/renaming rp.keystore. The main problem looks like gateway not being able to read rp.keystore. The password required for reading it is the admin password which works fine the admin console.By invoking certstore also I am getting the same error.

There is a couple of things I can think of here, one is the permission, you need to install the gateway as root , make sure the gateway and relevant files are installed as root and have the right access permissions.
There should be file called .rppass and this contains the password and this should match the same password that you have used for the admin console.
I would recommend you to use 3.0sp3a instead of 3.0 for better performance and scalability.
HTH ..

Error: cannot read from the source file ....... the file cannot be accessed by the system. (Exception from HRESULT: 0x80070780)

I have sync toy set up to sync my Skydrive with some folders on my local drive.
I'm running windows 8.1, 64 bit
I can copy files from my local drive to the Skydrve folder with no problems,
but if I add files to my Skydrive, and then when Sync Toy runs it will not copy the files from Skydrive to the local drive and throws up the error in the title.
I have tried changing permissions on both folder pairs with no luck.
Any ideas?

Try making the OneDrive files available offline.
See
http://windows.microsoft.com/en-gb/windows-8/onedrive-online-available-offline?woldogcb=0.

Cannot read from menu file!

Hi All,
When I put the menu property for some form, the form shows this error:
cannot read from menu file
How to solve it?

Make sure the Forms exists in OS PATH if u r calling without the complete path like \\appserver\forms\Myform.fmx
put \\appserver\forms in ur PATH
also check
Check the calling form spelling
Baig,
[My Oracle Blog|http://baigsorcl.blogspot.com/]

BRGUI: Connect WindowsXP to AIX: BR0255E Cannot read from standard input

Hi,
I configure brgui.properties and seam everything ok:
brgui.remote-0=D11 (rsh aixd11 -l orad11)
It connect to server, but in the footer of 2nd BRGUI screen (after login screen) it appears "Error: Cannot read from standard input" in red.
And some seconds later the application closes.
I see the log and it has the following:
BR0651I BRTOOLS 7.00 (16)
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0656I Choice menu 1 - please make a selection
BR*Tools main menu
1 = Instance management
2 - Space management
3 - Segment management
4 - Backup and database copy
5 - Restore and recovery
6 - Check and verification
7 - Database statistics
8 - Additional functions
9 - Exit program
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR0662I Enter your choice:
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0255E Cannot read from standard input
BR0280I BRTOOLS time stamp: 2008-04-15 16.30.10
BR0654I BRTOOLS terminated with errors
Can anybody help? Maybe is it related with AIX files authorizations?
Thanks a lot!
Rui

Hi Rui,
Please take note on the following important points.
When you use the remote option, ensure that the environment on the
remote host is fully configured to use the BR*Tools, and that the remoteuser has the relevant database rights. You should also ensure that the
relevant environment files are actually called up during the remote
access.
and
In some cases, BrGui does not work with the Remote Shell rsh from from
Microsoft Windows XP Service Pack 2 or Microsoft Windows Server 2003
Service Pack 1. See Microsoft Support Article ID 896336. Microsoft
offers a hotfix for this purpose. As a workaround, use the rsh from the
previous Service Pack. This is located in the uninstall directory after
the Service Pack has been installed. You can also enter the complete
path in the relevant remote call.
Hope the above information helps.

Getting FRM-40010 Error While opening new form .fmx

Hi,
Oracle apps : 11.5.10.2
Forms : Forms 6.0
I'm creating a custom form by using one oracle apps table.I created a basic form by using template.fmb and then saved it to directory "/dir1" and run this form by connecting to oracle apps database.
When I try to open .fmx from this directory ('/dir1') I'm getting FRM-40010 error.When I checked FORM60_PATH = It's showing /u01...../au/11.5.0/resource.I don't see "/dir1" in that path?
Do I need to modify forms60_path ?
Do I need to register this form before running as it's using table from Oracle apps schema?
Thanks,
Kiran

When I try to open .fmx from this directory ('/dir1') I'm getting FRM-40010 error.When I checked FORM60_PATH = It's showing /u01...../au/11.5.0/resource.I don't see "/dir1" in that path?You need to set FORMS60_PATH and include /dir1 in this path.
https://forums.oracle.com/forums/search.jspa?threadID=&q=FRM-40010+&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Do I need to modify forms60_path ?Yes.
$ export FORMS60_PATH=$FORMS60_PATH:/dir1
Do I need to register this form before running as it's using table from Oracle apps schema?Yes.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Register+AND+Custom+AND+Form&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Custom+AND+Form&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

After updating I ended up with 4 icons on my desktop - I cannot delete any of them. The error message reads; "Cannot read from the source file or disk".

I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".

Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps.

Cannot export video: AME cannot read from source, Installation Error

Ok, I've seen a lot of people on here talk about this and I have tried using their solutions but nothing has worked.
I cannot export anything from Premier Pro using Media Encoder. When I try, I get an yellow warning sign saying that it cannot read from the source, and when I close out of it I get a message saying that there is an installation error and that I need to make sure it is installed correctly. I have uninstalled and re-installed ALL of my Adobe products about three times this past weekend trying to fix it and nothing has worked. I have tried making sure that there are no blank spaces in my project, I have named it several different things, I have moved it from my external drive to my main drive, to a different external drive, etc.
I am using a Macbook Pro with Snow Leopard, all of my software has been updated, and I am very frustrated.
Help?

Bummer!
Well, it was worth a shot, as externals/network drives have been known to cause similar.
Now, there were issues with Encore and Snow Leopard, but I do not recall all of the details, as I am a PC-guy, and have to admit that first I do not know squat about Macs, and probably do not read Mac threads as closely, as I should. Seems that Apple was working on an update to Snow Leopard, and again from recollection, it seems that that update helped several on the Encore forum. Have you updated Snow Leopard?
Sorry to just sit here guessing, and probably wasting valuable time for you, but until a Mac-user with the "fix" comes along, the PC-community will try to help. Be patient with us though. Our intentions are good ones, but our expertise is lacking - at least in MY case.
Good luck,
Hunt

FRM-40010:can not read form

FRM-40010:can not read form/appstest/cmwprodappl/po/11.5.0/forms/us/nwasa.fmx
how can i resolve this error
please tell me

Ranga,
Make sure the form is there in the correct path.
Error Message: FRM-40010: Cannot read form %s.
Error Cause:
One of the following: 1. You entered a nonexistent form name. 2. You typed an incomplete path. 3. You do not have the proper privileges to run the form. 4. You do not have a compiled copy of the form.Regards,
Manu.

RH 8: Error: Cannot Read RHFrameStyleMappings.apj

We recently upgraded from RH7 to RH8. One of our project files (.xpj) would not open. After clicking Okay to Upgrade to RH8 I got a message "Error: Cannot Read RHFrameStyleMappings.apj". I decided to try copying RHFrameStyleMappings.apj from another project folder into the project folder of the project file that would not open. Then when trying to open the project file again I received this message "Error: Cannot Read RHFrameDoc.apj" and once again I copied it over from another file. I tried opening it again and it worked. I also tried generating the project to make sure it worked and it appears to work as normal. My question is if there is any reason my copying the two .apj files over could cause problems with the project file or if I should consider the problem fixed. Thanks!

Is that not the same problem as running in this thread?
http://forums.adobe.com/message/2311195#2311195
See www.grainge.org for RoboHelp and Authoring tips

LR encountered an error when reading from its preview cache and needs to quit.

I have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
Thank you.

Delete the preview cache from the Lightroom folder in your Pictures folder if you used the default placement. It has the extension .lrdata.
You cannot reset the trial period.

When backing up lightroom 4 catalog, get message "lightroom encountered an error when reading from its preview cache and needs to quit" this occurs during optimization stage of backup

i upgraded from lightroom 4 to lightroom 5 and installed it on a separate hard drive. Initially had no problems util my computer crashed due to the failure of the drive on which Lightroom 5 was installed. Since having my computer rectified, i am unable to use lightroom 5 getting the message "lightroom encountered an error when reading from its preview cache and needs to quit"
I can still use lightroom 4, however, i get the same message when i try to backup the catalog. This occurs during the optimisation phase of backup.
I suspect it is related to Lightroom 5 creating a catalog from the Lightroom 4 files and cannot now locate those files or that they have been corrupted.
Would appreciate any solutions / suggestions.

You need to delete your preview cache and have Lightroom rebuild it. Cache location can be found here.
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic

Cannot read from the source file or disk

I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.

It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter

FRM-40010 error: Cannot read from .... .fmx

Similar Messages

Maybe you are looking for