Front firewire not working in Antec Sonata case

Hi
I have a 865PE Neo2-FIS2R in a Antec Sonata case, and I haven't been able to get the front firewire port to work.
I've double check all my pin configurations and tested all of the ports tho no luck w/ any of them.
my configuration is:
P4 2.4GHZ 800 FSB W/ hyperthreading
1 x 512 MB Kingston PC3200
Sapphire 9600 PRO
Maxtor 20GB
IBM Deskstar 60GB
PLEXTOR 40/20/40A
PIONEER 16X DVD
Winxp pro (no sp1)
any ideas?

i discovered that what the problem was is that the wires from the connectors from the case were mislabled. the TPA+ and the TPA-, as well as the TPB+ and the TPB- were switched around (the plus was actually a minus)
after switching that around it worked w/o a hitch
thanks

Similar Messages

Iphone 6 plus front camera not working in whatsapp

iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

It seems the facetime camera does not work for whatsapp only it works normally.

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Help front camera not working on my sons iPod touch 5g

Help front camera not working on my sons iPod touch 5g

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Front camera not working

Hi, I was wondering if anyone else has had the same problem as myself in regards to the front camera not working. All I seem to get is a black screen! I'm not sure if I need to activate it somehow or it's just not working? Thanks Ross

UPDATE: After the intial Factory Data Reset, the camera work fine for one day. Now it's back to the same blank screen in the front camera. Also now my video camera isn't working either. I get an error msg "Recording in progress in another app. Cannot record". I know some folks were having issues with the "OK Google" app. I checked mine and all is unchecked. Spent most of the day talking with Sony and Verizon and neither was able to help me other than Verizon offered a refurbed phone. No thank you, my phone is new. **bleep** Sony? If anyone can help, it would be greatly appreciated.

Front audio connection on Antec Sonata case

I'm building a new system with K8N Neo Platinum and Antec Sonata. It's more or less working now execpt for bits and pieces here and there. I've been scratching my head over the audio connection all afternoon. The only way I can get audio signal to come out at all is to unplug the front audio line, put the jumpers back and get it out of the back.
Did anybody manage to get the front panel audio connection on the Sonata working at all? The pinout for JAUD1 on page 2-20 of the Neo Platinum manual looks exactly the same as front audio header header pin assignment on page 20 of the Intel Front Panel I/O Connectivity Guide. On the Sonata side, page 4 of the Sonata manual says "If your motherboard supports Intel's standard onboard audio connector, you can plug the 10-pin connector directly onto the board". So far so good. Then the Sonata manual goes on to say on page 5:
8. Rear Right Speaker Out Pin: Connect the RET-R connector to this pin.
9. Reat Left Speaker Out Pin: Connect RET-L connector to this pin.
Note: Your motherboard may not support rear speaker output. In this case, you do not need to connect RET-R and RET-L.
This last part makes no sense at all. According to the Intel document, those RET lines are signals returning from the front panel. They have nothing to do with rear channel, and they must be connected or you won't get anything from the rear line out jack. So what's really going on? Any insight would be greatly appreciated.
Andy

Those 8, 9 and the notes only apply if your motherboard does not have the Intel compatibile IO connectors. So you should ignore those lines.

Temporarily freezing audigy 2 and firewire not working - sol

hi,
i had two problems with my audigy 2 using windows xp:
a) my firewire port didnt appear to work. i had only one device using firewire which was my creative jukebox zen. i could only transfer 95% of the first mp3 and then it would say that my mp3 player is not responding.
b) i experienced random and temporary freezes, not only while gaming but even when writing e-mails. everything would hang for a few seconds and then continue to work like if you write text it will appear after the hang.
firewire: i used my audigy 2 in my old pc with windows me and win 2000 without any problems. neither with firewire nor with the eax4 driver patch. under win xp i could only transfer mp3s via usb and that is slow as hell as you can imagine. i first tried if transfers using the firewire port on my mobo worked but it didnt, same prob. i found a fix from microsoft that is not listed in windowsupdate at http://www.microsoft.com/downloads/d...DisplayLang=en (KB885222). that did not solve this issue but maybe you need that too so I mention it here. then i found some new drivers on the creative site. "oh you fool, why didnt you say earlier that you're using old drivers?" someone might say but these drivers dont work or more specifically, its setup routine sux. it quits with "an error occurred". wow cool... but it appears as it unpacks the driver to c:\program files\creative\jukebox3 or something (note, i have a zen and not a jb3...) so I uninstalled everything, rebooted and told the device manager manually to get the drivers from that location. now it works.
freezes: it took me many, many hours to search the internet, but i found absolutely nothing. sure i'm using the latest drivers (yea they actually work), put the card in slot3 and stuff. then i found a post on this board that mentioned that this guy's audigy had a heat problem. it became too hot and hung. hmm. i have 2x 2cm fans sucking heat out of the box through the radiator of my water cooling so heat is actually mostly get rid of through water and whatever else produces heat (harddisc, video card ram etc) is cooled by some really strong air flow. so wth, this card has worked for almost 2 years in my old box. so i opened the case and saw that air circulation around the audigy was impossible as its sandwitched by two other cards. those parts that i was able to touch were not that hot but i dont know how hot the main chip became and i have no clue why a sound card can become too hot from playing an mp3... anyway, i have left my case open and since then i havent had any freezes. now i also know why the freezes suddenly appeared and not since after i setup my box 3 months ago: it was open until i had cut a hole for the radiator...
oh yea, its good that my expensi've creative stuff works and that it was not creative's fault but that of a moron of a user. now honestly, how is an average user supposed to get their product working when the knowledge base is totally outdated and gives advice such as "update your bios, get the latest drivers and dont put your card into the microwave", when mods in this forum give advice like the knowledge base and the driver is not even installable? creative products are not bad at all, they're not cheap at all too. but the support page is absolutely not informati've and the knowledgebase does not give solutions to known issues. i was never ever able to find anything useful there and i'm really really not an average user but a very experienced one. not everyone wants to use a pre-installed dell box with el-cheapo components. i like to put my own high-end rig together and things must be pushed to the limit BUT still be absolutely rock solid. let me list my recent experience with creative products during the past 2 years:
-) bought an inspire 6. surround system and even replaced my audigy with version 2 for it. but unfortunately the subwoofer had a problem. it randomly made a popping noise which was so loud that it pushed your adrenaline level to that of a base jumper. i then found out that the whole batch had some faulty component. at least i got a replacement within a week, so i thought "yea, great support".
-) bought a jukebox zen, 20gb with firewire. it worked great for almost a year. then it died. when i switched it on, only the creative logo appeared, thats it. recovery mode was inaccessible too. it took me 2 months to convince the support lady to let me return this junk. first they sent me a new adapter because maybe it was damaged and the battery was low and therefore it didnt work anymore... then i was told, ok you can have a new one but we dont have firewire versions in stock anymore. you can have a usb one now or you wait until we get the firewire zen again. i said wtf, you produce this so why dont you have them in stock? and the usb version is sure not an equivalent to my firewire player. woot after 2 months i got a new mp3 player... had to rip 250 cds again (i really prefer having originals) and copy them to the player, but ok, i'm happy again. no, i'm not. this one doesnt work properly either. everytime i dont use the player for more than 24 hours i have to rebuild the database and scan the harddisc. that takes about 0 minutes for like 3000 songs!! grr... but i didnt want to argue with the tech support about that, i can li've with that. maybe i can flash to an older bios if i find one somewhere. from what i read somewhere it is caused by the zen going from hibernate into "off power" mode and then it forgets a few things.
and now i had the two issues described above and had to find a solution myself because the support pages dont help at all. sure you can say i should have thought of a heat problem but all important components are watercooled (even the north bridge) and i had some good airflow in general, but not around the sound card. and who knows that the audigy is that sensiti've to heat and that a sound card even gets hot at all. i've never heard of sound card cooling... i'm not that disappointed about the quality of the hardware because it is ok imo, but with the horrible lack of quality of the support and the buggy driver installation. hey, you get free advice by your customers, think about that. they tell you by themselves what the problem is and what they think may cause it. sure many posts are just flames but you should take ppl here more seriously. and if other manufacturers are to blame then put a list together like: msi k8n neo2 platinum - in this case upgrade to bios .2 or in that case install this or turn on/off that.
alright, i hope anyone can use this information. sorry for the length but i wanted to describe things as precisely as necessary. cheers from austria.
(edit: a typo)Message Edited by Temujin666 on 0-05-2005 03:49 AM

Hi folks,?Initially my audigy 2 nx was not working. But after installing the drivers for vista it started to work. But unfortunately, the other application from creative media source is not working. When I press EAX it says '[color="#000099">the application with the device not found'. But the sound card is working fine.[color="#000099">?[color="#000099">I have even mailed creative with the details. They have sent me a mail with the drivers and an application driver. I have installed the application driver too, but still no luck.[color="#000099">?[color="#000099">Kind regards,[color="#000099">Jwell[color="#000099">?

Front Row not working on new MacBook Pro

Hello all,
I cannot get Front Row to work on my new MacBook Pro. I've confirmed that my Apple Remote works using iChat's video preview to see the flashing IR transmitter. I've pressed Cmnd+esc also. I've even tried to double-click on the System >> Library >> CoreServices >> Front Row app to no avail. If someone could help me, I would appreciate it. Many thanks in advance.
2.2 GHz Core2 Duo MacBook Pro Mac OS X (10.4.10) 4 GB RAM

Front Row doesn't usually open if you double-click the application in the CoreServices folder, so that's not unusual. The one troubleshooting step I might try, before calling AppleCare Support since your computer is new, would be to use the Accounts System Preferences to create a new user. Log out and log in as the new user. Can the new user open Front Row with command-esc or the remote? If so, then your original user has a preference file problem. If not, then you may need to re-install Front Row and/or Mac OS X. If your Mac is less than 90 days old, I'd call AppleCare Support and get some help from them to do that (also so they're made aware that a new computer required that in case there's an issue at the factory).
-Doug

Sb X-fi Fatality front module not working in Winwows7 64 Bit

Hello everyone.
I have a little problem since a couple of days. I have my XBox360 connected to my SB XFi Fatality via optical cable. My sound card is equipped with a front panel where the optical cable is connected to. This configuration worked great when i had WinXp on my computer. Now i had to install W7 64 bit and using the latest driver from Creative and -the same cable configuration - is NOT working at all.
I've noticed 2 stuff:
1) in the SPDIF tab of configuration panel, at the "spedif settings" is missing the Dolby option as it is whown at this link http://support.creative.com/kb/ShowA....aspx?sid=2551
2) In the audio devisces is shown the Digital Audio SPDIF device but indicates that the optical cable is located in the rear panel ... it seems like the driver's doesn't recognize the front panel
Does anyone have some ideas ?
Thanx in Advance
Gatto
Ps: sorry for my english ...

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

SB X-Fi Titanium Front Panel not working

Hello,
I would like to fully use the Front Panel, because I own a 5. Surround sound system blocking all the backpanel slots. The problem is, that I simply get no sound from the front panel sound output, while the microfone works just fine. Is there some kind of special option to enable it's
The FP is properly plugged into my SB X-Fi Titanium. And it's also not broken, because the FP works perfectly with my onboard soundchip (though it seems to cause crackling in my headphones, so I cannot use it for it).
... Okay now the Mic FP is not working aswell, eventhough it did when I tried it the last time. I set everything I could, like choosing Headphone Mode, enabling FrontPanel everywhere and all that. So why is it still not working?
RIG: Win XP 32bit
Asus P7p55d
Creative SB X-Fi Titanium
normal Stereo Headset
Thanks in advance for any help!

Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks

USB and Firewire not working

OK I know, I search on forums already and I can't find anything like what I'm experiencing right now.
The only ports working are the ones in front of the Mac. Even the ones on both of my screens are not working.
My question: is there a place to setup a default priority on those ports? I mean, it's surely a setting somewhere that i can't find. It's impossible that all the ports except those in front are down...
Any clue?!?!

PieArson
I'm sorry you feel that way and truly there was no jeering intended. I'm actually trying to help. In your post your rider refers to Lamborgini. This is information you've provided. Remember?
It's not safe to make any assumptions about what you may or may not have tried yourself to resolve the issue. As a consequence advising someone to restart is fairly standard. Amazingly it can and does 'cure' a lot of problems. Occasionally I see a similar issue with my laptop. A simple restart fixes it. If there is a persistent problem with the rear ports and it's consistent regardless of what you connect then perhaps it's time you ran the AHT? Or if this is not available to you take it to your nearest Apple Repair Specialist who should be able to diagnose it further? One thing you could try to eliminate a possible OS problem is to boot from the Installer Disk. Connect to the same ports. Do they work now? If they do, back up and reinstall the OS.
+"It's impossible that all the ports except those in front are down"+
Not really. I also happen to be an Apple Certified Hardware Engineer and - rare that they are - I've seen problems like this before. Depending on the hardware the front panel board can be separate from the ports on the back.
+"is there a place to setup a default priority on those ports?"+
AFAIK No. Unless someone knows different? They either work or they don't.
+"I mean, it's surely a setting somewhere that i can't find."+
There are settings available for the Firewire Ports but only in terms of TCP/IP Networking. You'll find these in the Network Preferences Pane.
Tony

IPhone 4 front camera not working!!

My front iPhone 4 camera is not working. I know for sure its and hardware issue. I I take it to an Apple store, what info will they ask me for, once they find out its an hardware issue. Is it going to be a free replacement? I read previous question and they said they got free replacements, I want to know what information does apple ask for?

maybe it will work on another app camera..

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

IPhone 6 Plus front camera not working or with lines and static?

My iPhone 6 Plus front camera is having problems. Sometimes it doesn't work at all and the camera app freezes. Sometimes it works fine for a little while and sometimes it shows multi color static or lines.
I've tried:
Restoring from phone (without restoring backup)
Restoring from iTunes (without restoring backup)
Deleting ispw and re-downloading iOS 8.1.1 then restore
The phone is less than 2 months old. I noticed it acting weird a week or so after I bought it but thought it was just software. At first it wouldn't work when using the camera app but worked fine using facetime. Now it acts up regardless.
Any advice or opinions will be much appreciated.

Nore wrote:
I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1. I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
Are you a developer? IF so try asking in the developer forum.

Front firewire not working in Antec Sonata case

Similar Messages

Maybe you are looking for