Front panel sound.. please help

hi,
My motherboard is MSI 915G Combo. It has CMEDIA AZALIA sound chip which supports multistreaming functionality. The sound output can be taken from frontpanel as well as backpanel audio connectors. But the frontpanel connectors are provided as pins in this motherboard. I got a Mercury KM08 ATX cabinet which has frontpanel ports. But how can I connect the pins?? The cabinet have wires to connect the pins to frontpanel.
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
In my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
Please help me to connect the pins to the frontpanel connectors of the cabinet!!!!
also whats are jack sensing pins?? what are they used for??

Jack Sensing is a feature that allows the codec to choose what kind of device (mic, speaker or line-in) you're plugging into the jack by sensing its impedance. It's of no use here for your front panel chassis.
What I would try is to match the PORT 1L/1R with your Line Out FL/FR, and PORT 2L/2R with LineOut RL/RR. There is no MIC connection I guess from the pin names.

Similar Messages

HT3986 i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

i installed win 7 on my mac book, and the sound driver was installed successfully, but i don't hear any sound, please help

Is the volume muted? Click on the volume icon in the system tray to see if it shows as muted. If that's the case, I know of a workaround to fix this because if you unmute the speakers now, the condition will come back when you reboot your computer. I don't know the exact steps off the top of my head at the moment as I'm not in front of my machine. Check this first and reply if muting was the problem and I will detail the steps needed to fix the problem.

Front panel sound not working

Front panel sound not working* Hello everyone,
I've just bought a PCI Express X-Fi Titanium. So far everything works great with my 5. sound system, but I have problems with my front panel audio.
My case only supports AC97 front panel audio, but has all individual connectors (so 7 single connectors, not one with 0 pins).
I've already tried only connecting 5 pins (the two AC97 return pins unconnected) and connecting all 7 pins. In both ways the microphone works, but sadly not the headphone output. I also tried changing the two options in the driver but that changed nothing.
I did some Google searching and found many reports where the sound itself works with an AC97 front panel on an HD soundcard, just no jack detection.
Any ideas why that isn't working for me?

! Try here for pinouts of your jacks. I have a Cooler Master case that has AC97 and INTEL HD front panel jacks, but here is the kicker. The AC97 jacks come from the front panel first and then about fi've inches from this jack is an INTEL HD jack. A few wires are changed but perhaps these will help...
http://www.intel.com/support/motherboards/desktop/sb/CS-0585.htm
Cheers,
Jerry Macguire

I have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

i have one of the old macbooks and wish to hook it up to my tv. do i need a mini dvi to hdmi adapter plus a 3 rca phono lead with a jack for the sound. please help as im useless at this stuff. cheers

First we need to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.

Asus Xonar DGX no rear sound / mic. Front panel sound/mic ok. [SOLVED]

Hi guys,
I have a ASUS Xonar DGX PCI-E GX2.5 sound card since my onboard audio crapped out on my motherboard. I just did a first time install on my desktop and the rear portion of my card refuses to work. If I connect up my speakers to my analog output in the back I don't have any options in my sound manager for the analog output to just be a 2.0 system. I get 4.0, 4.1, 5.0, 5.1. All of which do not work obviously. Also my microphone doesn't work plugged into the actual card. If I plug them into the front panel audio, both the microphone and headphone out work. I did some searching, and it seems like a likely cause has something to do with amixer being multichannel. I tried several commands but wasn't successful in getting the audio to work through the back. Any help would be useful, I'm still trying to learn a lot about Arch while doing all this. Thanks in advance!
Solution. Using Alsamixer in terminal and selecting the analog out as stereo headphones, instead of stereo headphones (fp).
Last edited by 15goudreau (2014-08-04 21:56:36)

Search for vid and pid combination, ergo 13f6:8788 in your case. This should be one of the search terms, vid and pid could be also separated, other search terms could include oxygen, sonar, dgx and so on. Simple google search should turn something up.
Edit: The point is to locate a thread/post where the support for this card was implemented/talked about. It could provide some further insight.
The simplest approach would be to download linux-rt sources from aur with yaourt, modify PKGBUILD, compile and then install.
yaourt -G linux-rt
cd linux-rt
Copy this into PKGBUILD replacing the original:
# Maintainer: Joakim Hernberg <[email protected]>
# Contributor: Ray Rashif <[email protected]>
# Contributor: timbosa <[email protected]>
# Contributor: Tobias Powalowski <[email protected]>
# Contributor: Thomas Baechler <[email protected]>
pkgbase=linux-rt
pkgname=('linux-rt' 'linux-rt-headers' 'linux-rt-docs') # Build realtime patched -rt kernel
#pkgname=linux-custom # Build kernel with a different name
_kernelname=${pkgname#linux}
_basekernel=3.14
_releasever=12
_rtpatchver=rt9
pkgrel=1
_pkgver=${_basekernel}.${_releasever}
pkgver=${_basekernel}.${_releasever}_${_rtpatchver}
arch=('i686' 'x86_64')
url="http://rt.wiki.kernel.org/"
license=('GPL2')
makedepends=('xmlto' 'docbook-xsl' 'kmod' 'inetutils' 'bc')
options=('!strip')
source=("https://www.kernel.org/pub/linux/kernel/v3.x/linux-${_basekernel}.tar.xz"
"https://www.kernel.org/pub/linux/kernel/v3.x/patch-${_pkgver}.xz"
"https://www.kernel.org/pub/linux/kernel/projects/rt/${_basekernel}/patch-${_pkgver}-${_rtpatchver}.patch.xz"
# the main kernel config files
'config' 'config.x86_64'
# standard config files for mkinitcpio ramdisk
"${pkgname}.preset"
'change-default-console-loglevel.patch'
'0001-Bluetooth-allocate-static-minor-for-vhci.patch'
'0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch'
'0003-module-remove-MODULE_GENERIC_TABLE.patch'
'0006-genksyms-fix-typeof-handling.patch'
'0007-asus-xonar-dgx.patch')
md5sums=('b621207b3f6ecbb67db18b13258f8ea8'
'89a5af1f3609d0c27e63fea298dd80ed'
'2aa3614e488efa939007a1c428406c30'
'a8126ad28c0a902a575397cacd099db2'
'843119a441c942efc5ec4b73c3c6ced5'
'eb14dcfd80c00852ef81ded6e826826a'
'6623d69fdc936d707990ca060dabd2ce'
'6839ddec74a5300beff1709a81b0e4f3'
'706549e8a05f33f7fc697f28c0ca71d2'
'd23fc66be93ebce698bd7da844789de1'
'16a161979f846b049e90daea907c35dd'
'SKIP')
prepare() {
cd "${srcdir}/linux-${_basekernel}"
# add upstream patch
msg "apply patch-${_pkgver}"
patch -p1 -i "${srcdir}/patch-${_pkgver}"
# add realtime patch
msg "applying patch-${_pkgver}-${_rtpatchver}.patch"
patch -p1 -i "${srcdir}/patch-${_pkgver}-${_rtpatchver}.patch"
# add latest fixes from stable queue, if needed
# http://git.kernel.org/?p=linux/kernel/git/stable/stable-queue.git
# set DEFAULT_CONSOLE_LOGLEVEL to 4 (same value as the 'quiet' kernel param)
# remove this when a Kconfig knob is made available by upstream
# (relevant patch sent upstream: https://lkml.org/lkml/2011/7/26/227)
msg "change-default-console-loglevel.patch"
patch -p1 -i "${srcdir}/change-default-console-loglevel.patch"
# Fix vhci warning in kmod (to restore every kernel maintainer's sanity)
msg "0001-Bluetooth-allocate-static-minor-for-vhci.patch"
patch -p1 -i "${srcdir}/0001-Bluetooth-allocate-static-minor-for-vhci.patch"
# Fix atkbd aliases
msg "0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
patch -p1 -i "${srcdir}/0002-module-allow-multiple-calls-to-MODULE_DEVICE_TABLE-p.patch"
msg "0003-module-remove-MODULE_GENERIC_TABLE.patch"
patch -p1 -i "${srcdir}/0003-module-remove-MODULE_GENERIC_TABLE.patch"
# Fix generation of symbol CRCs
# http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=dc53324060f324e8af6867f57bf4891c13c6ef18
msg "0006-genksyms-fix-typeof-handling.patch"
patch -p1 -i "${srcdir}/0006-genksyms-fix-typeof-handling.patch"
msg "0007-asus-xonar-dgx.patch"
patch -p1 -i "${srcdir}/0007-asus-xonar-dgx.patch"
msg "All patches have successfully been applied"
if [ "${CARCH}" = "x86_64" ]; then
cat "${srcdir}/config.x86_64" > ./.config
else
cat "${srcdir}/config" > ./.config
fi
# if [ "${_kernelname}" != "" ]; then
# sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"${_kernelname}\"|g" ./.config
# sed -i "s|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|" ./.config
# fi
# set extraversion to pkgrel
#sed -ri "s|^(EXTRAVERSION =).*|\1 -${pkgrel}|" Makefile
# set localversion to pkgrel-rt
sed -i "s|CONFIG_LOCALVERSION=.*|CONFIG_LOCALVERSION=\"-${pkgrel}${_kernelname}\"|g" ./.config
# don't run depmod on 'make install'. We'll do this ourselves in packaging
sed -i '2iexit 0' scripts/depmod.sh
# get kernel version
make prepare
# load configuration
# Configure the kernel. Replace the line below with one of your choice.
#make menuconfig # CLI menu for configuration
#make nconfig # new CLI menu for configuration
#make xconfig # X-based configuration
#make oldconfig # using old config from previous kernel version
# ... or manually edit .config
# rewrite configuration
yes "" | make config >/dev/null
# stop here
# this is useful to configure the kernel
#msg "Stopping build"; return 1
build() {
cd "${srcdir}/linux-${_basekernel}"
make ${MAKEFLAGS} LOCALVERSION= bzImage modules
package_linux-rt() {
pkgdesc="The Linux Kernel and modules (with realtime preemption)."
#groups=('base')
depends=('coreutils' 'linux-firmware' 'kmod' 'mkinitcpio>=0.7')
optdepends=('crda: to set the correct wireless channels of your country')
# provides=("kernel26${_kernelname}=${pkgver}")
# conflicts=("kernel26${_kernelname}")
# replaces=("kernel26${_kernelname}")
backup=("etc/mkinitcpio.d/${pkgname}.preset")
install=${pkgname}.install
cd "${srcdir}/linux-${_basekernel}"
KARCH=x86
# get kernel version
_kernver="$(make LOCALVERSION= kernelrelease)"
# _basekernel=${_kernver%%-*}
# _basekernel=${_basekernel%.*}
mkdir -p "${pkgdir}"/{lib/modules,lib/firmware,boot}
make LOCALVERSION= INSTALL_MOD_PATH="${pkgdir}" modules_install
cp arch/$KARCH/boot/bzImage "${pkgdir}/boot/vmlinuz-${pkgname}"
# add vmlinux
install -D -m644 vmlinux "${pkgdir}/usr/src/linux-${_kernver}/vmlinux"
# set correct depmod command for install
cp -f "${startdir}/${install}" "${startdir}/${install}.pkg"
true && install=${install}.pkg
sed \
-e "s/KERNEL_NAME=.*/KERNEL_NAME=${_kernelname}/" \
-e "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/" \
-i "${startdir}/${install}"
# install mkinitcpio preset file for kernel
install -D -m644 "${srcdir}/${pkgname}.preset" "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
sed \
-e "1s|'linux.*'|'${pkgname}'|" \
-e "s|ALL_kver=.*|ALL_kver=\"/boot/vmlinuz-${pkgname}\"|" \
-e "s|default_image=.*|default_image=\"/boot/initramfs-${pkgname}.img\"|" \
-e "s|fallback_image=.*|fallback_image=\"/boot/initramfs-${pkgname}-fallback.img\"|" \
-i "${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset"
# remove build and source links
rm -f "${pkgdir}"/lib/modules/${_kernver}/{source,build}
# remove the firmware
rm -rf "${pkgdir}/lib/firmware"
# gzip -9 all modules to save 100MB of space
find "${pkgdir}" -name '*.ko' -exec gzip -9 {} \;
# make room for external modules
ln -s "../extramodules-${_basekernel}${_kernelname:--rt}" "${pkgdir}/lib/modules/${_kernver}/extramodules"
# add real version for building modules and running depmod from post_install/upgrade
mkdir -p "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}"
echo "${_kernver}" > "${pkgdir}/lib/modules/extramodules-${_basekernel}${_kernelname:--rt}/version"
# Now we call depmod...
depmod -b "$pkgdir" -F System.map "$_kernver"
# move module tree /lib -> /usr/lib
mv "$pkgdir/lib" "$pkgdir/usr"
package_linux-rt-headers() {
pkgdesc="Header files and scripts for building modules for linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-headers=${pkgver}")
# conflicts=("kernel26${_kernelname}-headers")
# replaces=("kernel26${_kernelname}-headers")
install -dm755 "${pkgdir}/usr/lib/modules/${_kernver}"
cd "${pkgdir}/usr/lib/modules/${_kernver}"
ln -sf ../../../src/linux-${_kernver} build
cd "${srcdir}/linux-${_basekernel}"
install -D -m644 Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Makefile"
install -D -m644 kernel/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile"
install -D -m644 .config \
"${pkgdir}/usr/src/linux-${_kernver}/.config"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include"
for i in acpi asm-generic config crypto drm generated keys linux math-emu \
media net pcmcia scsi sound trace uapi video xen; do
cp -a include/${i} "${pkgdir}/usr/src/linux-${_kernver}/include/"
done
# copy arch includes for external modules
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/x86"
cp -a arch/x86/include "${pkgdir}/usr/src/linux-${_kernver}/arch/x86/"
# copy files necessary for later builds, like nvidia and vmware
cp Module.symvers "${pkgdir}/usr/src/linux-${_kernver}"
cp -a scripts "${pkgdir}/usr/src/linux-${_kernver}"
# fix permissions on scripts dir
chmod og-w -R "${pkgdir}/usr/src/linux-${_kernver}/scripts"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel"
cp arch/${KARCH}/Makefile "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
if [ "${CARCH}" = "i686" ]; then
cp arch/${KARCH}/Makefile_32.cpu "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/"
fi
cp arch/${KARCH}/kernel/asm-offsets.s "${pkgdir}/usr/src/linux-${_kernver}/arch/${KARCH}/kernel/"
# add docbook makefile
install -D -m644 Documentation/DocBook/Makefile \
"${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# add dm headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
cp drivers/md/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/md"
# add inotify.h
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/linux"
cp include/linux/inotify.h "${pkgdir}/usr/src/linux-${_kernver}/include/linux/"
# add wireless headers
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
cp net/mac80211/*.h "${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/"
# add dvb headers for external modules
# in reference to:
# http://bugs.archlinux.org/task/9912
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core"
cp drivers/media/dvb-core/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-core/"
# and...
# http://bugs.archlinux.org/task/11194
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
cp include/config/dvb/*.h "${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/"
# add dvb headers for http://mcentral.de/hg/~mrec/em28xx-new
# in reference to:
# http://bugs.archlinux.org/task/13146
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
cp drivers/media/dvb-frontends/lgdt330x.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
cp drivers/media/i2c/msp3400-driver.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/i2c/"
# add dvb headers
# in reference to:
# http://bugs.archlinux.org/task/20402
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb"
cp drivers/media/usb/dvb-usb/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/usb/dvb-usb/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends"
cp drivers/media/dvb-frontends/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb-frontends/"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners"
cp drivers/media/tuners/*.h "${pkgdir}/usr/src/linux-${_kernver}/drivers/media/tuners/"
# add xfs and shmem for aufs building
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}/mm"
cp fs/xfs/xfs_sb.h "${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h"
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p "${pkgdir}"/usr/src/linux-${_kernver}/`echo ${i} | sed 's|/Kconfig.*||'`
cp ${i} "${pkgdir}/usr/src/linux-${_kernver}/${i}"
done
chown -R root.root "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}/usr/src/linux-${_kernver}" -type d -exec chmod 755 {} \;
# strip scripts directory
find "${pkgdir}/usr/src/linux-${_kernver}/scripts" -type f -perm -u+w 2>/dev/null | while read binary ; do
case "$(file -bi "${binary}")" in
*application/x-sharedlib*) # Libraries (.so)
/usr/bin/strip ${STRIP_SHARED} "${binary}";;
*application/x-archive*) # Libraries (.a)
/usr/bin/strip ${STRIP_STATIC} "${binary}";;
*application/x-executable*) # Binaries
/usr/bin/strip ${STRIP_BINARIES} "${binary}";;
esac
done
# remove unneeded architectures
rm -rf "${pkgdir}"/usr/src/linux-${_kernver}/arch/{alpha,arc,arm,arm26,arm64,avr32,blackfin,c6x,cris,frv,h8300,hexagon,ia64,m32r,m68k,m68knommu,metag,mips,microblaze,mn10300,openrisc,parisc,powerpc,ppc,s390,score,sh,sh64,sparc,sparc64,tile,unicore32,um,v850,xtensa}
package_linux-rt-docs() {
pkgdesc="Kernel hackers manual - HTML documentation that comes with the Linux kernel (with realtime preemption)."
# provides=("kernel26${_kernelname}-docs=${pkgver}")
# conflicts=("kernel26${_kernelname}-docs")
# replaces=("kernel26${_kernelname}-docs")
cd "${srcdir}/linux-${_basekernel}"
mkdir -p "${pkgdir}/usr/src/linux-${_kernver}"
cp -al Documentation "${pkgdir}/usr/src/linux-${_kernver}"
find "${pkgdir}" -type f -exec chmod 444 {} \;
find "${pkgdir}" -type d -exec chmod 755 {} \;
# remove a file already in linux package
rm -f "${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile"
# vim:set ts=8 sts=2 sw=2 et:
Then create the file '0007-asus-xonar-dgx.patch' with the following content:
--- a/sound/pci/oxygen/oxygen.c 2014-08-01 20:45:20.299191180 +0200
+++ b/sound/pci/oxygen/oxygen.c 2014-08-01 20:46:11.179947117 +0200
@@ -105,7 +105,7 @@
{ OXYGEN_PCI_SUBID(0x10b0, 0x0219), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0001), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x13f6, 0x0010), .driver_data = MODEL_CMEDIA_REF },
- { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_CMEDIA_REF },
+ { OXYGEN_PCI_SUBID(0x13f6, 0x8788), .driver_data = MODEL_XONAR_DGX },
{ OXYGEN_PCI_SUBID(0x147a, 0xa017), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
/* Asus Xonar DG */
Finally run makepkg, should there be errors try removing the src dir first 'yes|rm -r src', then run makepkg again. Should there still be an error post here.
As for the patch, should there be no real difference there is also MODEL_XONAR_DG, might be worth trying out.
Last edited by emeres (2014-08-01 22:34:05)

Front panel sound ports

Feeling quite pleased with myself because my first build is just about finished ( have a mass of cables to tidy up and tie back) However I do have one minor problem, I can’t get any sound out of the front panel (top panel in this case) headphone socket.
The front panel connector JAUD1 has nine pins and pin 7 is for future use according to the motherboard manual and pin4 is filtered 5V which I don’t have a plug for.
I have one lead with 3 connectors for mic , ground and mic power which go to pins 1,2 and 3. Another lead has right in & right out and left in &left out and ground. These go to pins 6,7,9&10. There is only one pin marked ground and this is already in use. So I haven’t been able to connect this ground. Is this what is stopping it working.
So although it is only a minor problem, it would be nice to have the headphone socket working. Anyone any thoughts?
Jeantech Apollo
Antec True blue 480W PSU
MSI k8N Neo2 Platinum
AMD 64 3500 Winchester
200 GB Seagate SATA HDD
XFX 6800GT
Soundblaster live 24bit
2GB Crucial 3200
Sony DVD/RW
Sony CD/RW/DVD combo
19” Viewsonic VX912

I really can't comment on the wiring exactly without seeing the schematics for the pins out from the motherboard. However, you apparently have a sound card installed so I am wondering what leads you are plugging your front case jacks into? I personally never have two sound capabilities activated in my systems. Since all MBs now come with integrated sound and I always use a sound card, I disable the onboard sound. I know if the onboard is enabled most boards have pins you can connect to the case sound jacks. When that is done you usually lose the sound out from the back panels jacks. So where do you have your front panel leads connected to? I have seen a couple of cases that have a formal mini-plug that you can plug into the card or the MB to bring the sound to the front of the case. Just some things to think about, probably didn't exactly answer your question.

MUFFLED SOUND PLEASE HELP!!!!!!

Hi,
I have put some movies onto itunes on Mac (os x) and can play them fine through itunes.
When i play it through apple tv the picture is there and some of the sound. The actors/actresses voices only come through very quietly and can't hear it.
I have tried everything i have read on these boards including restarting and changing settings! its driving me crazy!!
PLEASE HELP!!
Thanks in advance!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

WEIRD SOUND PLEASE HELP

my mac pro is making a cough-like sound at random times. i think it might be a notification sound but i can't seem to figure out what it is, and it's starting to get really annoying. ANYONE KNOW WHAT THE PROBLEM MAY BE? PLEASE HELP!

You computer model number or year? Version of OS X you're running? You said in the original post that these sounds are at random times, so I'll assume this isn't due to some sound effect setting in System Preferences. Open up the Console (in Launchpad > Utilities assuming you're running Lion) and select All Messages. If there is a common entry that appears in Console at the same time these noises are produced, report back what it is and someone may be able to help you. If not, I'm mystified - hardware problem?

I don't have sound, please, help me !!

I don't have sound , please i need help !! Thank you very much

Hi Mr. Shahid,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if you don't hear sound from your MacBook Air:
OS X Mavericks: If you can’t hear sound from your speakers
http://support.apple.com/kb/PH13841
Best,
Jeremy

How to get dateformat from Control Panel? Please help

Hi,
I need to get the date format as per displayed in the Control Panel's Regional Options tab.
May i know how to achieve this in java?
Please help.

Thanks for the feedback, actually my code is like this:
SimpleDateFormat sdf = (SimpleDateFormat) SimpleDateFormat.getDateInstance(DateFormat.SHORT);
System.out.println(sdf.toPattern());
If i open up my Control Panel and change the "Standards and Formats" to "English(United States), the "Short date" field is now showing "7/9/2010" which is "M/d/yy". This matches the format obtained using (SimpleDateFormat) SimpleDateFormat.getDateInstance(DateFormat.SHORT). However, it still returns me the format "M/d/yy" after i made the following changes:
1. Click on the "Customize" button to open the "Customize Regional Options" dialog window.
2. Select the "Date" tab, from the "Short Date format" drop-down list, choose "MM/dd/yy"
How can I get the exact date format displayed at Regional Options now, which is "MM/dd/yy"? Please advice.

Audigy SB 2 ZS Platinum Front Panel not working-HELP

Hey everybody. I'm new to this forum, but not to computers. I built my computer about 4-5 months ago, and here are my specs:
Ultra MS Blue Dragon
ASUS P5GD
Intel P4 Processor 3.0GHz
GB GeIL RAM
6600 GT 28MB Video Card
Samsung 20GB SATA HDD
Lite-On and NEC DVD Dri'ves
Ultra X-Connect 500 W PSU
Creative SB Audigy 2ZS Platinum
I got the 2ZS platinum from a friend, but I already had a regular 2ZS. I plugged in his front panel to my old 2ZS. The front panel did not work. I then got his 2ZS, just the sound card, and plugged in the front panel. It still did not work. I installed all the software and drivers, and nothing. My sound card works fine, it is just the front panel that doesnt work. Does anyone have any ideas?
Thanks a ton,
Derek
P.S. The AD_EXT Cable fell apart a couple of times, but we put it back together. Could that be a problem? If so, where can I get a new AD_EXT Cable?

ttt

Realtek High Definition Audio, static sound PLEASE HELP

Realtek High Definition Audio
Realtek Semiconductor Corp.
6.0.1.5910
window 7 ultimate x86
why after using window 7 got static sound ???? I am already updated all my driver........please help.......
I also already try installed drivers from HP's site and from Realtek's but still same got the same static sound problem don't know wat the problem , the sound like electic pop sound...........

Hi,
name321 wrote:
Realtek High Definition Audio
Realtek Semiconductor Corp.
6.0.1.5910
window 7 ultimate x86
why after using window 7 got static sound ???? I am already updated all my driver........please help.......
I also already try installed drivers from HP's site and from Realtek's but still same got the same static sound problem don't know wat the problem , the sound like electic pop sound...........
There are a few things you can try.
1) try another outlet in another room (different circuit group) to see if the sound is still present.
2) If you are using a power protection device between your PC and the outlet and it is old replace it with a new one.
Even replacing the motherboard generally won't cure this issue as it isquite likely to be related to a problem in the (earthing) grounding and wiring in your home.
please post your results her in our tread.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

TS2755 Good afternoon my daughter's iPhone sound will not go off when she receives a tax and when I push the volume button on side the speaker shows up with no lines on it but when she gets a call it rings with sound please help...

Please help my daughters iPhone will not make any sound when she gets a tx when I press the button's for volume on the side the speaker shows up but no lines show up on it.. She has the iPhone 4 thank u

First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
From Here
http://support.apple.com/kb/TS3281

Front Panel Audio connection help needed

I own an MSI 790GX-G65 with Realtek HD audio, installed in an NZXT Tempest case.
Using the AC-97 plug from the case into the MB JAUD1 connection I get front panel headphone audio, but no mic input or automatic detection from the Realtek manager.
In short: Which plug(s) do I use on the MB socket JAUD1? I will detail my NZXT front panel connections.
NZXT Connectors:
Maxi Plugs:
HD Audio
AC-97
Mini-Plugs:
MIC-IN
Ground
L-Out
Ret-L
Ret-R
R-Out
MIC-VCC
FYI: I'm using Windows 7 64 bit. OS has been updated to current.
Thanks for your help.
Merry Christmas!
Robert

Ok. I checked and confirmed... I DID use HD Audio in JAUD1. I only thought I was using AC97... The problem still is:
Front Panel Headphones: Okay.
Front Panel Mic: Not detected at all.
Audio driver version is 6.0.1.6316
Audio Controller HD Audio
Audio Codec: ALC889
DX11
Window 7
Thanks for any further suggestions

MOVED: K8t neo fir front panel sound out?

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=117772.0
Was in the wrong board.

Yes they need to be on if front panel is not connected as mentioned in the manual or you will not have have output at the rear connection. If front panel is connected you should have rear panel output if nothing is plugged in on the front panel output.
The jack acts as a switch, nothing plugged in, output to rear which will be the same as if jumpers were on.

Front panel sound.. please help

Similar Messages

Maybe you are looking for