Fsck output - is this fixable

So, my wife's iMac G3 is having issues, and I have not found a way to fix it. fsck is producing the following:
Invalid extent entry
(4, 2965)
Incorrect size for file InfoPlist.strings
(It should be 4096 instead of 4294967760)
Invalid node structure
(4, 10019)
Thanks for the help,
Eitan

Hi Eitan,
Not certain about that nessage, but if the HDD is really messed up that way, , your best bet is DiskWarrior, you need the CD though.
http://www.alsoft.com/DiskWarrior/

Similar Messages

  • Systemd-fsck output

    Hallo,
    i have some questions about systemd-fsck output shown in the console during the system boot. it looks like this:
    /dev/mapper/vg-root: clean, 82501/1310720 files, 647916/5242880 blocks
    systemd-fsck[234]: /dev/sda2: clean, 337/64000 files, 88881/256000 blocks
    systemd-fsck[233]: /dev/mapper/vg-home: clean, 30217/5283840 files, 961660/21116928 blocks
    systemd-fsck[232]: /dev/mapper/vg-var: clean, 19485/851968 files, 846527/3407872 blocks
    systemd-fsck[238]: fsck.fat 3.0.20 (12 Jun 2013)
    systemd-fsck[238]: /dev/sda1: 251 files, 3820/403266 clusters
    is it actually running any test?
    assuming the above shown output means something like "ok" or "there is no problem", i then want to hide it, so i created a file /etc/systemd/system/[email protected]/custom.conf with the content:
    # dont show systemd-fsck results in the console, if everything is ok
    [Service]
    StandardOutput=journal
    StandardError=journal+console
    this seems to work pretty nice, but there is one line remaining in the console, the very first one about the root partition. it seems somewhat different to the other lines, in that it misses the prefix systemd-fsck and it can't be found by journalctl
    how could i hide this first line?
    Is it right, that in case systemd-fsck detects any file system error it still would output these on the console because of the setting StandardError=journal+console?

    When you remove the fsck hook from the initramfs, you aren't hiding the output. Rather the test is not being run. Personally, I think that not running an important check on the integrity of your file systems simply to hide a few lines of output on the console reflects rather weird priorities but obviously that's up to you.
    For whatever it is worth, I have had cases in which stuff has gone wrong and fsck has identified the need to look at the file system journal. In every single case, the automated routine has examined, repaired and mounted the file system correctly. It has never prevented booting and I have seen almost no file system corruption with the exception of something on a fat 32 system which is obviously not journalled. Given that my system was for a while routinely shutting off in the dirtiest way possible, I think this reflects the robustness of both the file system and the associated maintenance tools like fsck and I would put up with a great deal more than a few lines of text on the console in exchange for this sort of security. My data is the most important thing on the computer and I will use whatever means are reasonably available to me to protect it.
    Of course, if nothing like this has (yet) happened to you, you may not (yet) appreciate the system's robustness. But sooner or later, you almost certainly will. (Unless your data is unimportant to you, of course. That would be different.)

  • Directing fsck output to syslog and screen in real-time

    Hello,
    I have the following under Debian 6. The procedure should check and automatically repair the file system and write the result to the user's screen and also to syslog.
    #!/bin/bash
    output=`fsck -y /dev/disk/by-label/oracle-xe; retval=$?`
    logger -is "$output"The procedure seems to work, but I don't see the output until the fsck command has completed. Is there a possibility to write the output to syslog while presenting the fsck output in real-time?
    Kind regards.
    Edited by: Dude on Jan 30, 2012 6:44 PM

    I make some progress:
    outfile=/tmp/`date +%N`
    retfile=/tmp/`date +%N`
    (fsck -y /dev/disk/by-label/oracle-xee; echo $? > $retfile) | tee $outfile
    logger -i < $outfile
    retval=`cat $retfile`
    rm $outfile
    rm $retfileThe above gives me the results I was looking for
    I also tried
    logger -is "`fsck -y /dev/disk/by-label/oracle-xee`"But it the syslog output in this case is just one long line of text without any newlines
    If there is a better way, please let me know.
    Edited by: Dude on Jan 30, 2012 6:57 PM

  • Unable to find the published output for this request - problem

    Hi ,
    In the invoice Payables module i modified a report to be open in xml and not text as it was. The program name of this report iis Print Invoice Notice. I did same thing we normally do to register a xml report in ebs.
    The problem is that when i run the report from the invoice form and from the button wich call this raport i get this error:
    Unable to find the published output for this request.
    No output file exist for the request
    and if i see the log file i get this message :
    Arguments
    P_INVOICE_ID='10243'
    APPLLCSP Environment Variable set to :
    XML_REPORTS_XENVIRONMENT is :
    +/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb+
    XENVIRONMENT is set to  /oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_ALBANIA.UTF8
    +' '+
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.27.0 - Production on Fri Mar 27 02:30:46 2009
    +(c) Copyright 1999 Oracle Corporation. All rights reserved.+
    The thing is that if i run this report from Other ->Request -> Run of the same module this raport runs correctly
    And if i change the output of my report (From concurrent manager) to text its open correctly even from there where i want to open it.
    Can anyone give me any sugestion why i get this error while i try to open this xml publisher report from a button in a form in application?
    PS: i am using ebs 11.5 version
    Thanks in advance,
    Best regards

    Hi,
    REP-3000: Internal error starting Oracle ToolkitThis errors was discussed many times before in this thread, so please search for REP-3000 and fix this error first ( [REP-3000|http://forums.oracle.com/forums/search.jspa?threadID=&q=REP-3000&objID=c84&dateRange=all&userID=&numResults=15] )
    Regards,
    Hussein

  • We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    We are recording 2 voices over an instrumental track. Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases. Is this fixable? We are using Alesis multi mix 8 with 2 microphones.

    Badger33rk wrote:
    Every time there is a rest in the vocal part the volume of the instrumental track noticeable increases.
    turn the Ducking menuItem off

  • HT5557 The ibooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?

    I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........

  • I have recently replaced my iphone 4s front screen and made an error with the logic board. Is this fixable? picture will be linked

    Here is the picture of the logic board with the piece that has been broken off highlighted in yellow.
    https://plus.google.com/photos/118184697040837060146/albums/5873105616394112433
    Is this fixable some where? Or am i s%!t out of luck?

    If something has broken off the logic board, you'll need to get a new logic board.

  • My imac screen has vertical lines in multicolors. is this fixable?

    My imac has multicolored lines on the display.  Is this fixable?

    Yes. Replace the display. Please make a Genius Appointment and take it in for service.

  • Output from this file

    Hi,
    just i want how will atomatically output form this file to todays date file .
    I have create daily report so how will you copu following output to to todays date.txt file copy.
    DATECOMP=`date '+%d%m%Y'`
    DATECOMP1=`date '+%y%m%d%k%M'`
    DATECOMP2=`date -d "-1 day" '+%d%m%Y'`
    mkdir /oracle/${DATECOMP}.txt
    du -sh /oradata/arch
    du -sh /oradata/backup/xyz_backup/${DATECOMP2}.tgz
    du -sh /oradata/dpdump/xyz_${DATECOMP1}.dmp.gz
    du -sh /oracle/product/10.2.0/db_1/admin/xyz/bdump/alert_xyz.log
    du -sh /oracle/product/10.2.0/db_1/admin/xyz/udump
    du -sh /oracle/product/10.2.0/db_1/admin/xyz/cdump
    du -sh /oracle/product/10.2.0/db_1/network/log/listener.log
    du -sh /oracle/product/10.2.0/db_1/network/log/sqlnet.log

    Surely I agree with Pavan here that I amnot able to "exactl" understand the need or question. But I guess you want a daily report sort of thing. Make up a shell script and then configure it with DBMS_SCHEDULER.We don't know that youhave 10g or not but still I am just taking a guess that you have. Than using UTL_FILE ,maintain the o/s file the way you want.
    Aman....

  • Getting error "Unable to find the published output for this request"

    1. Created a Data Template
    2. Created a Data Definition using the above Data Template
    3. Created a RTF template and registered the same in XML Publisher Administrator
    4. Created Concurrent program for the data template using 'XDODTEXE' as executable
    5. Ran the above concurrent program and it completed successfully.
    6. When I click the 'View Output' button in Oracle applications it says "Unable to find the published output for this request".
    7. I can see the XML output in the $APPLCSF/out directory.
    8. Also the short name for concurrent program and data definition code and template code are same.
    I assume the Concurrent Manager’s Output Post Processor is not able to setup the layout template to the generated XML.
    Am I missing something here. Can anyone come across this issue.
    I have the XML publisher 5.6.1 patch on the DB. Do I need to take 5.6.2 Patch to fix this issue.
    Thanks

    I tried again after applying XDO 5.6.2. I am still not able to see the output.
    Here is the logfile info. There is no mention of OPP or PUBLISH section:
    XDO Data Engine ver 1.0
    Resp: 21540
    Org ID : 101
    Request ID: 348042
    All Parameters: p_batch_id=7169
    Data Template Code: AUDRPT
    Data Template Application Short Name: XXCUST
    Debug Flag: Y
    {p_batch_id=7169}
    Calling XDO Data Engine...
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 348042
    Number of copies : 0
    Printer : noprint
    Finished executing request completion options.

  • My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

    Try a system reset.  It's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • Unable to find published output for this request

    Hi All:
    I have created a XML report (Data Template and the RTF) in EBS and the program runs fine.
    Then I changed/modified the Data Template and updated the xml file. When I try to run the report after the change
    the report completes normal but have no output and gives me "Unable to find published output for this request"
    I can not figure out what I am missing..
    Please help
    Thanks,

    Hi Octavio:
    Thanks, This was helpful.
    It works after I end dated the RTF template and then run the program again. Now I have the XML with my changes in and then I can modify the RTF and upload it again..
    Thanks
    Edited by: user10800212 on Jan 29, 2009 9:32 AM

  • Water got on screen, now ipad won't even turn on, is this fixable and at approximately what cost?

    Water got onto screen of ipad, now won't even turn on. Is this fixable and at approximately what cost?

    Apple does not repair iPads, but will replace the entire iPad for a flat fee; see the Repair Pricing section here:
    http://www.apple.com/support/ipad/service/faq/
    There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair".
    Regards.

  • Hi having problems with my screen output right this momemt it varies from clear to sgva quality with occasional streaks of purple flashing through it while i am typing this is my screen going bad just updated nothing has been spilled in or on it.

    currently clear and ok.  Could my screen be going bad after only four years?  output resolution this after was poor no better than a PC jr of the 80's went in and recheck my perferences and they seem all in order.  Only thing I can come up with is a video card going bad or screen malfunction.  Going to take in to genius bar.  I Don't think I have any malware on it.  Anybody with any ideas.  Need this machine to complete my college courses in photoshop and illustrator.  Only have 2 gigs of memory but that has worked fine up till today.  Occasionally screen is darken on the edges till I jump into a program or the internet.  Thanks for any suggestions  Douglaswilliams1@mac .com

    currently clear and ok.  Could my screen be going bad after only four years?  output resolution this after was poor no better than a PC jr of the 80's went in and recheck my perferences and they seem all in order.  Only thing I can come up with is a video card going bad or screen malfunction.  Going to take in to genius bar.  I Don't think I have any malware on it.  Anybody with any ideas.  Need this machine to complete my college courses in photoshop and illustrator.  Only have 2 gigs of memory but that has worked fine up till today.  Occasionally screen is darken on the edges till I jump into a program or the internet.  Thanks for any suggestions  Douglaswilliams1@mac .com

  • I had a cheap iPhone 5 charger in my phone, I tried to pull it out gently and it make two metal things come out of my charger port, is this fixable

    My iPhone 5 had a cheap gas station charger in the charging port, the charger then got stuck and I tried to pull it out and now there are two metal things sticking out of my charging port? Is this fixable?

    Make a Genius Bar appointment at your nearest Apple Store and have them look at it.

Maybe you are looking for