FTP rename?

Is it possible to issue a ftp rename command after the ftp put command when using ftp protocol to send files using X12 over Generic Exchange? Van I am communicating with requires this action to process edi file. Just wondering if there is a way to add the rename cmd after the STOR cmd
FTPAgent.putFile() begin ...
Host name is 'ftphost'.
Host ftphost FTP command: USER xxx
FTP Command: USER, reply:
331 Need password.
host = ftphost FTP command: PASS
FTP Command: PASS, reply:
230 xxx logged in, proceed
host ftphost FTP command: CWD /send
FTP Command: CWD, reply:
250 CWD command successful.
Host ftphost FTP command: TYPE I
FTP Command: TYPE, reply:
200 Command okay.
Storing data to server 'ftphost' in file test.dat
Host ftphost FTP command: PASV
FTP Command: PASV, reply:
227 Entering Passive Mode. (xxx,xx,xxx,xxx,x,xxx)
Passive: ip = xxx.xx.xxx.xxx, port = 1147
Connecting to ftphost:1147
Host ftphost FTP command: STOR test.dat
FTP Command: STOR, reply:
125 Data connection already open; transfer starting.
Created file 'test.dat' at server 'ftphost'.
FTPAgent.putFile() completed.
[IPT_FileSendPutCompleted] /send/test.dat is transferred successfully via FTP or File System..

I was wondering of the creator of this message thread was able to find a solution? I am needing the same thing.

Similar Messages

How to invoke the FTP rename operation?

Does anybody know whether it is possible and how to invoke the 'rename' operation from the FTP Adapter (using ESB)?
Thanks in advance,
Jeroen van Schaijk

Hi,
Please use the below code for your Web Service Call
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:cus="urn:crmondemand/ws/odesabs/customrecordtype/" xmlns:data="urn:/crmondemand/xml/customrecordtype/data">
<SOAP-ENV:Header>
          <wsse:Security xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext">
               <wsse:UsernameToken>
                    <wsse:Username> USERNAME </wsse:Username>
                    <wsse:Password> PASSWORD </wsse:Password>
               </wsse:UsernameToken>
          </wsse:Security>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<cus:CustomRecordTypeUpsert_Input>
<data:CustomRecordType>

<data:Name>myname</data:Name>

<data:SingularName>myname</data:SingularName>

<data:PluralName>myname</data:PluralName>

<data:ShortName>myname</data:ShortName>

<data:IconName>myname</data:IconName>
<data:ListOfCustomRecordTypeTranslations>

<data:CustomRecordTypeTranslation>

<data:LanguageCode>?</data:LanguageCode>
<data:SingularName>?</data:SingularName>
<data:PluralName>?</data:PluralName>
<data:ShortName>?</data:ShortName>
</data:CustomRecordTypeTranslation>
</data:ListOfCustomRecordTypeTranslations>
</data:CustomRecordType>
</cus:CustomRecordTypeUpsert_Input>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Hope that helps!
Thanks & Regards
Sablok Kumar

FTP ReceiverChannel and OS commands help

Hi,
I'm trying to execute an Operating System Command after processing.
I want to move *.dat files from the "ccc" Folder to the temp folder on the FTP server.
The command line looks like this "move \ccc\*.dat \temp"
Can any one help.
Live long and prosper
Frank Hinrichsen

I have an Receiver FTP adapter.
After Message Processing,I would like to move the file on the FTP server.
Under "Run Operating System Command After Message Processing" in the command line I write
<b>"ftp rename /Folder/filename.xml /newFolder/filename.xml"</b>
I think this is the right syntax.
I'm using permanently connection. so there should be no login issues.
But the rename on the FTP server is not done. The User is autorized to execute the rename command.
I have succesfully used the above command in DOS prompt.
Hope this makes my problem clear to you .
Regards Frank

Rename file name & format using ftp sender

Hi all,
This is regarding the renaming of file at sender file(FTP) communication channel and placeing the same file in the same folder.
At FTP server at sender side (i.e.clients place) is in .txt format.But now .txt file has to rename and change into .sav foramt with below required name convention of file.
client format is : SAP_Order.txt (Pervious file name).
We need to change the file in to "SAP_Order_yyyymmddThhmmss.sav" format..
How can i achieve this requirement?
Can please suggests me solutions ASAP.
Best Regards,
satya,

Hi,
if your requirement is to pick the existing file in the FTP folder...and send as idoc to the target and place the renamed file to FTP folder...
then its simple...
use two receivers instead of one , one for point to target and other for sender itself... (second receiver is for changing the file name format....)
Hope the above understanding is correct...if not provide more details of your requirement...
HTH
Rajesh

Rename and move files on remote FTP server

Hello,
We have a scenario where XI transfers a file to a remote FTP server at partner end using File Receiver Communication channel.
These files are huge,so there is a risk of picking up incomplete files at their end when XI is still writing the file on their server.
Hence,we have decided to follow the approach which is already mentioned a number of times on SDN that XI would place a file with different name and in a different folder on partner's FTP server.
This would then be renamed and moved to the required folder on the same server.
This could easily be managed using a script at partner end but there are some problems when they are not able to do this.
Is there a possibility to achieve this using 'Run OS command after Message Processing' in XI when Source and target folders both are on partner's FTP server?
If yes,can anybody please provide code for such a script and corresponding setting for this parameter in XI Communication channel?
Thanks a lot in advance.
Best Regards,
Shweta

Hello,
Thanks for the reply.
But this has to be done in FTP session because the source and target directory both are on remote FTP server.
Instead,in SAP documentation,I found a parameter :
ftp.putSafe=YES|NO
Use this specification to define whether a transferred file is first created with a temporary name and only renamed once the transfer is complete (YES), or whether it is created with its final name at the start of the transfer (NO). The latter case can lead to problems if an application on the FTP server accesses the file before the transfer is complete. If you specify YES, this problem is avoided because the file only becomes visible with the search name when the transfer is complete.
The default value is NO.
Doesn't it serve the same purpose?Do we still need to write scripts?
I have tried to include this in Additional Parameters in Advanced Mode as:
ftp.putSafe YES
but I can't check in test system whether it is really working or not.I would like to confirm if it helps.
First of all,I would like to know if this setting works for XI3.0 SP17.
Can anyone please help.
Thanks.
Regards,
Shweta

FTP send to VAN process generates error after rename attempt on file already moved to an archive.

I am sending an EDI file to a server managed by a VAN (This same process handles multiple other FTP locations, first VAN), what is happening is that after the file is dropped the FTP adapter does a rename and tries to add the file extension .edi to the file.
The problem is that the VAN moves the file as soon as it is received to an archive and by the time the adapter tries to rename the file is gone and an error is sent back to BizTalk.
The file is in the VAN fine and according to them they don't care about missing a file type.
The problem is that I start getting the suspended messages in BizTalk and I have a manual process that tries to resend suspended messages causing duplicate files to be sent.
I tried to issue a "QUIT" on the "AFTERPUT" property but this did not work, how do I stop BizTalk from trying to rename the file or tell BizTalk not to send a "fail" message back.
Thanks
Bico Bielich

Duplicate thread, see here:
https://social.msdn.microsoft.com/Forums/en-US/e7130b69-22c9-45b3-b369-9a207cbc16b5/error-renaming-file-being-dropped-in-ftp-server-of-a-van-?forum=biztalkgeneral

Can't delete or rename folders when I FTP

Hi
Hope someone can help me with this!!
When I connect to a webserver using FTP with dreamweaver, it
won't let me delete or rename any folders.
It's nothing to do with the persmissions becasue the user has
full permissions and can delete or rename when I FTP using a
different client. Any ideas?? Is there a setting that I am
missing??
Thanks in advace for any help
Cheer

Do you run a mac?
I had this problem at the last company that I worked for. I
was on a Mac
then; not sure if that had anything to do with the problem.
I could sometimes connect with Dreamweaver but I could always
connect with
another ftp client. At one point, when the problems started,
I used
Dreamweaver to rename folders on the server. Instead of
creating them on my
own system, I created files and renamed folder directly on
the server
through DW. After that, I had problems. At one point, all the
files got
changed so that they were locked down.
Occasionally, I thought I isolated the problem. At times,
recreating the
entire site worked. At other times, it helped for the server
to be rebooted.
At times I thought it was because of the firewall or content
filter that was
doing it. I think it was a Windows Server that I had the
problems with. I
don't remember if the other servers gave me problems.
I never really resolved it. Now I'm at a different job and I
have but a
passing interest in what it might be.
Sorry I don't have anything solid.

How to ftp and rename file in Unix

Hi Gurus,
I've one requirement where I need to rename the file extension to .xml and read the file.
Here I am pasting my sample code what I've tried
#get the file from remote server
ftp -v -n 10.60.17.111<< EOF
user user user
cd /u01/oratest/gebiz_processed
lcd /usr/tmp
bi
get GEBIZ_ACS_RPO000*.ACK
#mdelete $file
#mv GEBIZ_ACS_RPO000*.* /u01/appltest
#get GEBIZ_SUPP.xml
bye
EOF
echo
cd /u01/oratest/gebiz_processed
file =$(ls -rt GEBIZ_ACS_RPO000*.ACK | tail -1)
if [ -r "$file" ];
then
#HERE ONLY I NEED TO RENAME THE ABOVE .ACK EXTENSION TO .XML
a_file=$(basename $file .ack)
b_file="'$file'"
c_file=$file
echo "Filename: $a_file $b_file" && echo
output=`sqlplus -s /nolog <<-EOT
set pages 0 feed off
whenever sqlerror exit failure;
connect xgbzprod/xgbzprod
exec XGBZ_GLSEGM_XMLTAG_PROC($b_file);
`
echo $output
mv $c_file /u01/oratest/gebiz_inbound
fi
This is my whole script, Steps in this I am performing like :
1> Get the file from another server where the full file name I don't have, since it is suffixed with timestamp, so I called this one like this GEBIZ_ACS_RPO000*.ACK
2> During FTP time, once I copy to my server then I need to delete file GEBIZ_ACS_RPO000*.ACK on that server, I've full permission. How to write that one.
3> Then inside my server I need to change GEBIZ_ACS_RPO000*.ACK to GEBIZ_ACS_RPO000*.XML. How can I write this.
4> Changed extension file name I need to pass in my pl/sql script for processing, which I am taking care.
5> Inside GEBIZ_ACS_RPO000*.ACK, I've xml data only. So I need to change extension of the file to GEBIZ_ACS_RPO000*.XML
I tried to write like above mentioned but I am not getting successful and more over I am not able to rename the file. I know
with command
mv GEBIZ_ACS_RPO000*.ACK GEBIZ_ACS_RPO000*.xml
I can do that but I want it in program way.
Gurus, please help me how to write those steps, and correct me if I am doing wrong above.
Thanks in advance for your help.
Regards
Nagendra
Edited by: 838961 on Mar 30, 2011 12:22 AM

I'd do something like this:
cd /var/tmp
if !wget -c --user=theuser:thepassword 'ftp://10.60.17.111/u01/oratest/gebiz_processed/GERBIZ_ACS_RPO00*.ACK'; then
    echo "FTP fetching failed.' >&2
fi
for fn in GERBIZ_ACS_PRO00*.ACK; do
    new=$(basename "${fn}" .ack).xml
    mv "${fn}" "${new}"
    sqlplus -s /nolog <<-EOF
        set pages 0 feed off
        whenever sqlerror exit failure;
        connect xgbzprod/xgbzprod
        exec XGBZ_GLSEGM_XMLTAG_PROC('${new}');
    EOF
    mv "${new}" /u01/oratest/gebiz_inbound
done
{code}

My iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.

my iWeb image names are incompatible with FTP servers and must be renamed but I can't find the images in iWeb. I can upload to a desktop file and change them there but then I would need to download them to a new site in iWeb to publish them.
What's the answer?
Thanks

Many thanks to responded to my question and sorry not to get back sooner.
Yes, I discovered by this unfortunate experience that the names of photos are a serious issue if the site is to ever go to an FTP server. Apple should discuss this carefully in their "manual".
One more question: I uploaded the website to a folder on my desktop. When I open it, unlike the photos in iWeb, there are folders for each page which have all the photos in them. I went through each folder and changed the names to be FTP compatible. I'm using iWeb SEO Tool which allows one to upload from this local folder to an FTP server but having trouble.
Is this because there is an imbedment in iWeb that uses the old photo names to link to the actual photos and it can't find them because of the name changes?
Thanks again for your help ...
Phil McP

Pure-ftp cosmetic Rename/move error

I found some previous posts and even a TID (7000662) that are similar to an issue I am having but not exactly the same.... I am running OES2SP2 and LUM enabled pure-ftp in a NCS cluster pointing to NSS volumes. Everything actually works just fine but every single transaction reports the following error in the log...
Rename/move failure: Invalid argument
As previously stated, everything actually "seems" to work just fine. In the past, this issue was reported to be caused by the AutoRename option of pure-ftp combined with lack of hard link support on NSS volumes. However, in the past the uploads would fail. As far as I can tell, this is nothing more than excessive log clutter. I already slapped a syslog filter in place redirecting all pure-ftp logging to a dedicated log file and put log rotation in place but it would be nice to make it go away.
Any suggestions? Should we try disabling the AutoRename (which based on the CURRENT description of that option is not preferred) or enable hard links on the NSS volume, or something completely different?
TIA,
Chad

Check out this setting as well as, AutoRename and the hardlinks.
# Set to 'yes' if you don't want your users to rename files.
NoRename no
Neophate wrote:
> I found some previous posts and even a TID (7000662) that are similar to
> an issue I am having but not exactly the same.... I am running OES2SP2
> and LUM enabled pure-ftp in a NCS cluster pointing to NSS volumes.
> Everything actually works just fine but every single transaction reports
> the following error in the log...
>
> Rename/move failure: Invalid argument
>
> As previously stated, everything actually "seems" to work just fine.
> In the past, this issue was reported to be caused by the AutoRename
> option of pure-ftp combined with lack of hard link support on NSS
> volumes. However, in the past the uploads would fail. As far as I can
> tell, this is nothing more than excessive log clutter. I already
> slapped a syslog filter in place redirecting all pure-ftp logging to a
> dedicated log file and put log rotation in place but it would be nice to
> make it go away.
>
> Any suggestions? Should we try disabling the AutoRename (which based
> on the CURRENT description of that option is not preferred) or enable
> hard links on the NSS volume, or something completely different?
>
> TIA,
> Chad
>
>

Rename Filename using FTP adapter

Hi All,
I have a simple file to file scenario with renaming the filename of the file at the target.
Source Filename - ABC
Target Filename (Expected) - ABC_pqr
I am using adapter specific message attributes to generate filename as '%filename%_pqr' as target filename, but only the filename 'ABC' appears in the target filename and additional '_pqr' is neglected.
Is there a way by which this can be achieved? I know, there is a option of using OS Command to rename the file at source and than use the filename.
Are there any other options, by which it can be achieved?
Thanks for your help in advance.
Regards,
Ashish

Hi Ashish,
Use Dynamic configuration. Here is the Code: Map to the target root node.
public String Filename(String a,Container container)
String b; // Target file Name
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyHeader1 = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
b = /* Here the condition to rename the file
conf.put(keyHeader1, b);
return "";
Thanks,

How to rename a XML file using the file/FTP adapter

Dear All,
I am trying to rename a file using VARIABLE NAME SUBSTITUTION.
My structure:
<ns1:MSg xmlns:ns1="http://www.mycomp.inf.br/msr">
<ns1:MSgVal type="A" Id="188549">
    <ns1:cab>
      <ns1:PO>4500000000</ns1:cPO>
      <ns1:BI>90000000011</ns1:cBI>
    </ns1:cab>
</ns1:MSgVal>
</ns1:MSg>
How do I do to get the value 188549 from the field Id that is into the tag MSgVal?
I created a variable var1 and my reference is:
var1 --> payload:ns1:MSg,1,ns1:MSgVal,1,Id@,1
I am getting the error:
Could not process due to error: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var1
Regards,
Fernando

Hi,
Like pinted by Michal, use Adapter Specific Identifers.
In your mapping set the file name using the code in this link and then in your Receivr File Adapter select the Adapter Specific Identifiers --> FileName .
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/content.htm
Regards
Bhavesh

Adapter Module to rename a file at FTP

Hi All
I have to write a Adapter module to change the filename of a file which is at the ftp location.
How can i do this.
Regards
Dheeraj Kumar

you dont need an adapter module for this.
You can easily use dynamic configuration and ASMA to do this.
/people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
By the by for the adapter module refer -
How to create modules -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bdc14e1-0901-0010-b5a9-a01e29d75a6a

RENAME/COPY/DELETE a file using FTP Adapter in 11g using dynamic values

Hi All
We have a requirement to do the above for a client. I was able to find a post\blog that tells you to add the below properties in FTP adapter JCA file and it works but,
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPIoInteractionSpec">
<property name="SourcePhysicalDirectory" value="foo1"/>
<property name="SourceFileName" value="bar1"/>
<property name="TargetIsRemote" value="false"/>
<property name="TargetPhysicalDirectory" value="foo2"/>
<property name="TargetFileName" value="bar2"/>
<property name="Type" value="COPY"/>
</interaction-spec>
The problem is that how to assign these values dynamically (from xpath or bpel variables etc). Can somebody provide me with some pointers? Its very urgent!

Use the below approach to set the directory and file names dynamically.
In BPEL source mode, specify the bpelx:inputProperty. Set the values for these variables in bpel. These can also be accessed as bpel preference values.
<invoke>
<bpelx:inputProperty name="jca.ftp.SourceFileName" variable="SourceFileNameVar"/>
<bpelx:inputProperty name="jca.ftp.TargetFileName" variable="TargetFileNameVar"/>
</invoke>

Rename file at FTP

Hi All
I have written a module in which i am checking wheather the file is duplicate or not -
this is successfully done.
What my new task is i have to include a code in this module that ---
if the file is duplicate rename the file.
How can i achieve this???
Regards
Dheeraj kumar

Hi,
In my opinion rather writing a module for this task if you write a small script which will check the duplicacy of file and at the same time it will either delete one of the duplicate file or rename it (that is as per your requirement).
I do not have any idea about writing scripts but if someone knows then it will be done easly as per my understanding.
Regards,
Sarvesh

FTP rename?

Similar Messages

Maybe you are looking for