FTPS on PI for Sender & Receiver
HI ALL,
my sender and reciver system are FTP servers we are using PI 7.1
customer wants make this a secure connectivity ,we are trying to FTPS option.
Query
1)How & from where i can find out the exsisting FTP Server supports FTPS .. ?
2)for the sender FTP server ,do we have to give the certificates from PI ..or FTP server admin has to give certifiactes and we have to import them in PI..and what is that cartifiate
3) For the receiver FTP system ,do we have to give the certificates from PI or FTP server admin has to and we have to import them in PI. ?
4)can we achive FTPS without using certificates .. ? if we are using creaticates User ID and Pwd is required or not .. ?
thanks
Souz
Hi,
If you select FTPS as connection security,its uses SSL and Transport Layer security internally.as per my knowledge you no need to provide any certificates,PI uses stadard internet security standards.
If you selected FTPS for Connection Security, then enter the following details:its same for sender and receiver.
1) Under Command Order, specify the sequence of commands used to authenticate and secure the connection.
Retain the default setting. Only adjust the sequence of commands to match those expected of the FTP server if you encounter problems with the FTP connection. For information about the correct setting, see the documentation for the FTP server.
2) If you want the adapter to authenticate itself to the FTP server by X.509 certificate and public key cryptography, select Use X.509 Certificate for Client Authentication.
The corresponding key/certificate pair must be saved in a keystore view of AS Java.
3) Enter the Keystore and the X.509 Certificate and Private Key.
refer below link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/658ac3344a4de0e10000000a1553f7/frameset.htm
Regards,
Raj
Similar Messages
-
Hi all,
We are on PI 7.4 AEX SP 7. We are trying to get the following scenario working: Inhouse warehouse management system (JMS) --> PI --> ECC (IDoc)
Sender is configured as 3rd party technical system system with business system maintained in SLD
business system has logical system assigned in SLD
adapter specific identifiers show logical system in ID / NWDS
logical system is defined in receiver (ECC system)
partner profile is created in ecc for this very logical system (inbound parameters)
No mapping of EDI_DC40 node in ESB (complete node disabled)
no header mapping in ID / NWDS
receiver IDoc AEE adapter is configured to not enforce control record (Control Record in IDoc XML = Not Mandatory)
no Identifiers specified in receiver IDoc AEE adapter
My guts feeling is that this should work, however, it doesnt't. Failing with "The Configuration for Sender/Receiver Partner Number/Port is incorrect. Enter proper values in Sender/Receiver Component"
Any thoughts are highly welcome.
Cheers
JensHi,
The error mentioned by you is not related to the port..but its related to the Application ...
IDoc 51 means idoc has been received in R/3 client and when it tries to process it ended in error..
Check with the functional consultant for the error you have received..
HTH
Rajesh -
Data types for Sender/receiver JDBC
HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,refer these blogs for better informations on jdbc data types
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252bto%252bjdbc
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/jdbc%252b2%252bjdbc (for reciever JDBC)
JDBC Receiver Adapter -- Synchronous Select Step by Step -
Set of subVIs for sending/receiving SMS written in LabVIEW
I've just post a set of programs for GSM modem on the following site:
https://sites.google.com/site/tstalevski/labview-send---receive-sms-message
With these subVIs you can send, receive, delete and list SMS meseges. Also you can easily test AT commands.
If you have some questions regarding to using programs do not hesitate to contact me by e-mail.
Trajan Stalevski
[email protected]Hi
There is no need to develope mobile application for
sending SMS from the PC.
n general, there are two ways to send SMS messages
from a computer / PC to a mobile phone:
Connect a mobile phone or GSM/GPRS modem to a
computer / PC. Then use the computer / PC and AT
commands to instruct the mobile phone or GSM/GPRS
modem to send SMS messages.
Connect the computer / PC to the SMS center (SMSC) or
SMS gateway of a wireless carrier or SMS service
provider. Then send SMS messages using a protocol /
interface supported by the SMSC or SMS gateway.I would like to know how do you set up the whole thing. What are AT commands and Where do i get thm and how do i use them. i am sorry for asking so many question but i am really interested in knowing this. I am doing my school project which requires me to send sms from my PC.
Please help!!!!
Thanks
Kholi -
Why cant select phone number for Send & Receive on iMessage
I want to select my phone number for send and recieve on iMessage but it is only letting me click my e-mail adresses. How do I go about solving this? It only happened when I switched over to the 5C from my 5 on iOS 7. Help!
On your Mac, start Messages > Preferences... > Accounts
Make sure your Apple ID is selected and enabled
You can be reached for messages at:
Your iPhone number is checked (Yes, it's grey out) -
File adapter - how to make shure a file is complete for sender/receiver?
Hi everybody,
I want to use the file adapter and a question arises for both sender and
receiver:
On the sender: How does the PI know when a file is complete for reading?
Can this be a problem (PI starts reading the file when it is not complete?)
On the receiver: How does the receiver know when a file written by
PI is complete? Does PI support some kind of write to tmpfile then rename
schema?
Thanks for any suggestions
Best regards
StefanHi Stefan,
On the sender: How does the PI know when a file is complete for reading?
Can this be a problem (PI starts reading the file when it is not complete?)
Yes, it could be a problem: Have a look at below from help.sap
Advanced Mode
To specify additional parameters in the adapter configuration, set the Advanced Modeindicator.
● Msecs to Wait Before Modification Check
Enter the number of milliseconds that the adapter must wait before it checks whether the files have been changed.
This parameter is not available if you have selected File Content Conversion as the Message Protocoland then made an entry under Recordsets per Message that splits an input file into several messages.
This parameter is applicable only for the File adapter. If you enter a value in this field when configuring the sender FTP adapter, it will have no effect.
Regards,
Carlos -
Multiple FTP server files for sender File adoptor
Hi,
we have a requirement to pick files from different FTP servers and send it as a proxy message to ECC.File structure format for both FTP server locations is same and I need to send as a same proxy message.
Please let me know how to achieve this. Thanks.
Regards,
RajeshHi Rajesh,
Here you are having two FTP Server to pick the files so that you need to create below list of objects.
For two different FTP Server you need to create two different sender systems
2 sender File channels
2 sender agreements
2 receiver determinations
2 interface determinations(use single inbound interface in both interface determinations)
2 receiver agreement
If you want to use single sender then
2 sender File channels
2 sender agreements
2 receiver determinations
2 interface determinations(use single inbound interface in both interface determinations)
1 receiver agreement
thanks,
madhu -
Solution for sending/receiving multiple accounts via Mail and web Gmail
I don't know why I haven't seen this before, especially since I've posted about this with no solutions, but I just discovered I can now do the following:
I have multiple email accounts from multiple domain names, and can send and receive from all accounts through Apple Mail as well as only one Gmail web client.
At the gmail.com web client, I go to Settings: Accounts and Import and click on Send mail from another address. I fill in the obvious info for each email account I want to add, choose 'Send through Gmail', and follow instructions to verify.
At the Apple Mail client, after configuring my Gmail account (instructions on how to do this are all over the web), I go to Preferences: choose the Gmail account: Account Information: Email Address and add in all the email addresses I want to use separated by commas (ie [email protected], [email protected], [email protected])
Now when I send to or from any of these emails, it sends and receives with the correct From: and To: emails, as well as replies to the correct emails.
As for the iPhone, I just add accounts for each of the emails I want to send from and put in wrong info for the incoming mail (ignoring the initial 'can't connect' pop-ups). I receive all mail just fine and can send.
Again, this didn't work a few months ago, but it does now. Maybe I'm missing something without realizing it yet.godaddy accounts sometimes like port 80 vs 587 as well. just to piggy back on your thread.
-
Configuring Multiple domain Email addresses in Exchange server 2013 for Send/Receive
I've setup an exchange server 2013 , I have an requirement to setup email addresses for multiple domain account.
For example - My primary email addresses - [email protected] however i need to setup multiple domain email account for single AD user.
Example
[email protected]
[email protected]
[email protected]
I was able to setup account to receive email from different users to single mailbox users however how can i send mails from other domains email address apart from primary domain email
Thank you
BenhurHello,
Come back and mark the replies as answers if they help and unmark them if they provide no help.
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Cara Chen
TechNet Community Support -
JDBC Adapter can be used for sender / receiver for MS Access ?
Hi Experts
I want to communicate with MS Access by using JDBC sender and receiver
adapter ? How to set up ?
Links/screen shots/etc..........
Adv thanx
regards
rakeshHi Rakesh ,
>>>> Why the driver is : jdbc:odbc:Driver={Microsoft Access Driver
(*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb ?
if your test data base file is TestDB.mdb you need to give the absolute path of the file to get access to JDBC adapter set so you can replace the file path with the corresponding path on your test system .
Please place the data base file in a directory where the XI system has share access.
Regards,
Nanda -
Keyboard shortcut for send/receive in Entourage?
Hi,
Does anyone know if you can refresh your inbox in Entourage by way of a keyboard shortcut?
Thanks,
ChrisI found out it's command-K.
-
Question about send/receive data in as3
hello
i want to ask : how can i send data from flash to php using as3 and receive data from php using flash .
and another question : how can i upload files using as3 .
thank you .Look into URLLoader documentation for sending/receiving and FileReference for uploading:
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/URLLoader.html
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/FileReference.html -
Sending & Receiving SO electronically
Hello,
I have one scenario.I will be receiving the customer PO electronically i.e through IDOC. I will make sales order & send the Order confirmation to my customer electronically i.e through IDOC.
Now my question is how to configure inbound & outbound IDOC in the system. As far I know this involves more from technical side but I want to know what are the programs to be used for sending & receiving IDOCs. what is the logic by which one can send & receive IDOCs.Please provide me in detail.
Regards,
Naveed Ansari.Hi there,
To send / receive the IDOCs to / from SAP, you will need to have the partnwer profiles defined in WE20. You will define the sending / receiving systems as partners in WE20.
Then you will define the IDOC message types in WE30. There you can also specify what segmenst you need & what data needs to go in the segments.
Then you will assign the message type to the inbound & outbound paramaters in WE20. Every message type will have a relevant IDOC posting / processing progs. You will have to asign them to the message types.
For eg: When a PO is created, SAP will receive the IDOC from an external system. The IDOC posting prog will be called which will post the information into the SAP application doc. Here PO or SO.
When the sales order is created, the IDOC O/p will be created. The IDOC processing progs will send the IDOC into the partner recciver port. It will call an RFC which will post an application doc into the external system.
All the posting progs are developed by the ABAP. So contact your ABAPer & explain the functionality. But partner profiles are defined by func consultants.
Regards,
Sivanand -
How send/receive sms in j2me
Hi Friends,
I am very new to J2ME.I need source code for sending/receiving sms with J2ME as application.
Can you give the guidence.
Thanking you.
Cheers,
Sateeshyea google is ur friend. also try and get the documentations from jcp.org
what you need is JSR 205 -
IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send
Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
Sender:
- RFT
- Idoc-Interface
- urn:sap-com:document:sap:idoc:messages
Reciever
communication party = space
communicatin component = ZTEST_COMP
Configure Reciever:
There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
-RFT
- Idoc-Interface
- urn:sap-com:document:sap:idoc:messages
Reviever:
ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.
Maybe you are looking for
-
Preventing the creation of direct PO
Hi there experts, I would like to know if there is some way to prevent the creation of direct PO. I want that the PO is always created with reference to a PR or a contract. Tanks in advance
-
HT3622 Problem with iTunes recognizing 2 different iPod Nanos.
I have an original 2GB Nano Silver (2nd Gen), and recently acquired a new 16 GB Nano (6th Gen). After using iTunes to install Playlists on the new 16 GB Nano, and accepting the software update for the iPod, it now refuses to recognize my old Nano. I
-
My iPod Touch 5th Generation is severely cracked
I shattered my screen even though it was in an otterbox case. I was wondering where I could take it or send it off to and how much it would cost to get it fixed. Also, would I get to keep my same iPod but with a new screen or would I have to get a re
-
Youtube video file format in iphone
Hi, I have yourtube accout, and I uploade the video in (.flv)(.mov)(flash)(.mp4)(.avi), but non of them not working in iphone youtube, but they working in my computer.please tell me which format is working in youtube inside the computer and iphone yo
-
Release Strategy or work flow in BI Content
Hi ! Do we have Release Strategy or work flow in BI Content of BW Release 3.5 ? I have to display a history of purchasing requisitions and orders that was uploaded from SRM. Thanks !!! Zelda