Full Stock Removal & Full Stock Placement
Assume, in the source storage bin "B1" we have stock of 100 qtys. (Storage type "S1") and the destination storage bin is "B2" (Storage type "S2").
Suppose, a process order has been created for 75 qtys. and corresponding to that a TR generated for 75 qtys..
So, material has to be transfered from source bin BIN "B1" (Storage type "S1") to destination bin "B2" (Storage type "S2").
So, when we create a TO for this TR & confirm the TO, system picks only 75 qtys. from the source bin "B1" (storage type "S1") & transfers 75 qtys. to the destination storage bin "B2" as per the TR qtys.. (instead full 100 qtys. is to be transfered)
Now, the clients requirement is that, complete 100 qtys. is to be transfered from the source bin "B1" (Storage type "S1") to destination bin "B2" (Storage bin "S2").
In the configuarion settings for Storage type 'S1', "Full stock removal is activated" and "Retun stock to same bin is active" (SU Mngt. is active. ). As the SU Mngt. is active, we are not able to un-check the indicator "RETURN STOCK TO SAME BIN".
But even though the above setting is active, while stock removal & placement, the system is considering only 75 qtys.and transering the 75 qtys. from "B1" to "B2", instead at the time of stock removal system should consider the full 100 qtys. & full stock 100 qtys. is to be transfered to the destination bin "B2".
Also, if i check the indicator "OVERDELIVERIES" for movement type 319, we are able to transfer the full 100 qtys. to destination bin "B2", but we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
So, Please help me, how can we achieve the "FULL STOCK REMOVAL & FULL STOCK PLACEMENT" .....
What STATERGIES to be selected & any other configuration is invovled in this....please let me know.
Thanks & Regards,
Pavan CN
Edited by: cn_pavan on Jul 25, 2009 7:19 PM
Hi,
Please check this thread:
Re: Issue on complete stock removal
remark:
we have a situattion not to check this indicator for movement type as this will effect for all the warehouse numbers as well as all the storage types.
As I remember (I'm not before SAP, so maybe I'm mistaken) you can define movement type WH-specific.
Regards,
Csaba
Edited by: Csaba Szommer on Jul 26, 2009 7:59 AM
Similar Messages
-
SAP Scripts for Stock Removal and Stock Placement ?
Hi All,
Can you please let me know what are the SAP script names and Transaction codes for Stock Removal and Stock Placements ?
Thanks,
RajHi
Tcode is MIGO only (select Goods receipt) and mvt type as
Putaway (305, 315, and so on)
Stock removal (303, 313, and so on)
Transfer posting (301, 311, and so on)
regards
Yogesh -
WM - Stock Placement and Stock Removal Strategy
Hi Gurus
Need yr expertise..
What would be the ideal stock placement strategy if need to store standard pack in one location and partial quantity in another location?
example:
standard pack for material A is 100pcs
if GR 250 pcs, TO need to be created for 200pcs at location A (since it is standard pack) and
50pcs at location B (sicne it is partial)
The same logic aplly for stock removal strategy. If customer order of 200pcs, system need to pick
from location A (since it is standard pack). If customer order 50pcs, system need to pick from
location B. What will be the ideal stock removal strategy?
Please advise
Rgds..Sanjayyu can make use of the small/large stock removal strategy and for the concerned material in WM 2 view you can give the control quantity like if the requirment is of >200 pc then storage type 0002 should be used to pick the goods otherwise if required quantity is less then system should search for storage type 0001
this is a standard strategy -
User Exit for Stock Placement for Next Empty Bin Strategy
Hi Techi's
I have got one requirment for stock placement in Warehouse Managment as below:
If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
And if they use the "Next Empty Bin" strategy then the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
Now what my client wants is that to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
Please please help me.
Thanks in Advance.
-=Maddu=-Hi All,
Please help me for this. I am heavyily stuck on this. -
User Exit for putting own stock placement logic in WM (Warehouse Managment)
Hi Techi's,
I have got one requirment for stock placement in Warehouse Managment as below:
If client uses the standared strategy for putting stock in Storage Bin as "Addition to Stock" Then the self life of the coming material is being replaced by the existing material's seft life.
If they use the "Next Empty Bin" strategy than the obove issue is not coming but system always searches for the full empty bin only thus wastage of the existing bin's which already has some space.
Now what my client wants is to use the "Next Empty Bin Strategy" so that self life is not being overwritten but along with system should not search the complete empty bin for placing the stock rather it should search the bin's which already has some space then later move to the empty bin's.
For good reciept they are using MB01.
In summary its a mixture of "Addition to Stock and Next Empty Bin" Strategy.
Please suggest me the Exit for this if available or tell me the code if already has implemented it. Friends its going very hot.
Please please help me.
Thanks in Advance.
-=Maddu=-Hi Maddu,
If I undertstand it correctly,
System should search for the available Bin Capacity, and if there is space available the next incoming stock also need to be placed in the same Bin (system should suggest the Bin).
Now, let us consider the Physical process involved. Let us say, System suggested Bin A1001 and stock of Material A 500 Qty has been placed in some part of the Bin. Now, next time for the same material while incoming, system let us assume for time being suggested A1001 Bin due to available capacity. The operator should place the stock in the same bin, right. Assume that you have two quants in the Bin so that in system Shelf life date (GR Date) is different for these two different receipts. However, while Issuing even if system suggested Bin based on Shelf Life date, how the Operator will physically identify between the above two stocks. Hence, there should be physically some more identification parameters.
Under this case, either you can have Batch Management, (two have multiple quants) or Storage Unit Management. In this way, system will suggest the Identifier based on GR Date or Shelf life Exp date, also physically some labels placed to identify the different stocks in the same Bin.
I hope, it clarifies your doubt.
Last but not the least, user Exit will not solve your purpose.. instead operation process change involved along with Batch Identifier or Storage Unit Identifier.
Please reward points, if it helps.
Thanks & Regards,
Ramkumar -
Hi
Two quries
The scenario is -On receipt of stock need to first fill the Fixed bin in the Fixed storage type and if the capacity reached max in the fixed bin then the reserve bins in the reserve storage types are to be filled.Only one fixed bin is maintained for a material.
(1) Wat stock placement strategies need to be maintained for the storage types Fixed and reserve storage types.
(2) Iam trying using Stock placement strategy for fixed storage type as "F" (fixed bin ) and in the reserve storage types as "K" (near picking bin).Defined Storage type search sequence first fixed and next reserve storage type.In the Near picking bin stock placement strategy activation expect "Search width per level" and "Assign shelves to the aisiles" all other configuraion are done.
Pls tell me the impact of not using these two steps in detail. (a) Search width per level(b) Assign shelves to the aisiles .Is it mandatory to use this two steps for the near picking bin strategy .
help me to solve these quriesHi Kumar,
I suppose you have maitained capacity check for the storage type 231 .
Based on the SUT's and u r strategy P, the system will allcate the numbers.
usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
the special characters gets assigned after the placement.
hope this helps !!! -
SAP WM -Stock Placement-Near Picking bin
Hi
Two quries
The scenario is -On receipt of stock need to first fill the Fixed bin in the Fixed storage type and if the capacity reached max in the fixed bin then the reserve bins in the reserve storage types are to be filled.
(1) I trying using Stock placement strategy for fixed storage type as "F" (fixed bin ) and in the reserve storage types as "K" (near picking bin).Defined Storage type search sequence first fixed and next reserve storage type.In the Near picking bin stock placement strategy activation expect "Search width per level" and "Assign shelves to the aisiles" all other configuraion are done.
Pls tell me the impact of using these two steps in detail. (a) Search width per level(b) Assign shelves to the aisiles .Is it mandatory to use this two steps for the near picking bin strategy .
(2) Is their any other solutions can be followed for the above said scenario.
help me to solve these quries
Regards
KumarHi Aktar
We maintained
Stoarge Type Stock palcment Strategy:Addition to exsisting Stock
SUT Active,SU Active ,Addition to exsisting stock Active
In Mixed stoarge :Mixed Storage Not Allowed.
(Mixed stoarage Type Indicator "A" is not allowed when we are using stock palcement startegy as 'Addition to exsisting stock").
Material we are not tracking by batch number ,but SLED will be maintained at the time of receipt.
When we receive New stock ,system is adding to the BIN which already has the same Material ,System is adding the new stock to the exsisting SU Number(Not creating the New SU Number) and SLED information even though different for the Incoming New stock ,system over writes with the exsisting stock SLED.
Pls help ,how to solve this
Regards
Kumar -
Report MCL1: Analysis Stock Placement and Removals: Selection
Hello,
I want to use report by T.Code MCL1- Analysis Stock placement and Removals. This is standard SAP report. When i am putting my warehouse no and execiting it it is saying no data for selection.
I want to know to run this report whether any SPECIAL customization setting is required and what will be the output of this report.
Regards,
ShaileshHello,
This is an older post.
In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
Tables are:
S090 WM: Stock placements/removals
S091 WM: Quantity flows
Regards
Waza -
MCL9 Mat stock placements and removals report
I'm trying to find a good report that shows the material stock placements and removals. I tried MCL9 but i get a message indicating no data exists. why would that be? Thank you
Hello,
This is an older post.
In SPRO for LIS >Updating Control>Activate Update-->Inventory Controlling / Warehouse Management
Tables are:
S090 WM: Stock placements/removals
S091 WM: Quantity flows
Regards
Waza -
Stock placement strategy via user exit
Hello,
I'm tring to change putaway strategy by using a user exit.
In customizing i enter:
Logistics Execution u2013 Warehouse Management u2013 Strategies u2013 Putaway Strategies u2013 Define strategy for fixed bins.
Table V_T301S.
When i enter one of the movements i can put V next to User exit act.
How can I make the connection between the strategy and the user exit?
Thank you,
Lilah.Hi,
In the ST masterdata (config: WM - Masterdata - Define ST) you must activate the User Exit field for putaway and/or removal for the specified ST you want to use with a user exit. See view: V_T3010-USEIN or Table T331-USEIN. When this indicator is set and you go through the TO creation log, you will see that at some stage there will be an entry where is states that you are using an user exit to place/pick stock.
Cheers,
Hein -
i maintain the storage bin structure for automatic creation
warehouse number storage type sequence
ZWM ZEL 001
ZWM ZEL 002
ZWM ZEL 003
Material Like RM01_A, RM01_B, RM01_C
RM01_A RM01_B RM01_C
0A-01-01 0B-01-01 0C-01-01
0A-01-02 0B-01-02 0C-01-02
0A-01-03 0B-01-03 0C-01-03
0A-01-04 0B-01-04 0C-01-04
0A-01-05 0B-01-05 0C-01-05
0A-01-06 0B-01-06 0C-01-06
0A-01-07 0B-01-07 0C-01-07
0A-01-08 0B-01-08 0C-01-08
0A-01-09 0B-01-09 0C-01-09
0A-01-10 0B-01-10 0C-01-10
Example
Our process is each material (RM01_A) has allocated the particular bin series like from A-01-01 to A-01-10.
other material RM01_B has particular series from B-01-01 to B-01-10.
If it is bin is not have space means system should moving to other series of available of bins
System is should give preference to allocated bin only. If bin is full means stock is move to available bin
pls help me ,iam doing implementation . i need your help
With regards
dinesh
Edited by: code acess on Jul 5, 2011 4:39 PM
Edited by: code acess on Jul 5, 2011 4:41 PMHi,
Mainitain the search sequence in statergy. SPRO>LE> WM > Strategies> Activate storage type search-->Define search sequnece.
If you have defined 3 storage type 001, 002 and 003 for ZWM where house, then maintain search sequence like this
Wh NO St type Ind Storage Type 1 2 3
ZWM 001 001 002 003
ZWM 002 002 003 001
ZWM 003 003 001 002
Rgds,
Vinay -
SAP WM-Stock Placement Strategy "P"
Hi Gurus
While using stock palcement strategy "P" "by storage Unit Type" we are dividing bins to section like
Stoarge Type Section No of itms
231 A 3 1 2 3
is this code need to append to the storage bin co ordinate
like 002-001-A/1 002-001-A/2 002-001-A/3
If so when i create the storage bin co ordinate through Ls01n by defining the Storage bin co ordinate as 002-001-A/1 system throw error "The special character "/" must not be used in the storage bin name".
How to solve this ,pls explain the stock palcment through startegy "P" ,where to mention the bin section in the bin coordinate.Hi Kumar,
I suppose you have maitained capacity check for the storage type 231 .
Based on the SUT's and u r strategy P, the system will allcate the numbers.
usually if there are two SUt's ina a bin where it belongs to the storage type 231 then the bin will have 001-02-A/2
the special characters gets assigned after the placement.
hope this helps !!! -
Stock Placement during Return Delivery in Ware house
Hi All,
We have a scenario where client while returning the material to ware house want to place it in different bin. Currently the process is carried out through LT0G but here system is proposing the destination bin (original bin) as the same bin from where the batch stock is picked. Now due to some unavoidable reason before PGI user wants to unload the batch stock and place is it different bin. For this purpose currently we are first confirming the Transfer order created for return of batch stock to original bin and again creating a new TO to place the material from original bin to new destination bin. how can we avaiod cration of this extra Transfer order.
BR
MukeshLT0G provides the option to place the stock in a different bin than it came from, this is even he usual way in our warehouses since the bin where the material was picked from is again occupied by other stock.
The TOs are actually evidence, they shall usually reflect the physical movements in a warehouse.
if you have already moved your material out of its original bin, then you need another TO to get it back or into any other bin. TOs are not even just an evidence, they are instructions, they are the communication method to instruct a warehouse worker to do something.So you should not try to avoid this important step. -
Stock placement into multiple bins
hi,
i configured my put away and stock removal strategy as manual , so end user entering bins in TO, where i need to put stock into different bins like, if i receive 50 items means it should be placed into two bins 25 -25. if i try to give in the TO table it wont allowed me.(throwing error:Total of scheduled quantities exceeds quantity to be placed into storage)but i give that exact quantity only. any configuration i have to give.
Thanks
Muthruaman.DHi Muthuraman,
Could you please check the configuration for the storage type definition. In storage type definition please check the configuration for addition to stock if it is blank it doesn't allow stock to be put in the bin in that storage type.
Kindly check and confirm
Best Regards
Sasibhushan -
Stock placement in multiple bins
hi,
i configured my put away and stock removal strategy as manual , so end user entering bins in TO, where i need to put stock into different bins like, if i receive 50 items means it should be placed into two bins 25 -25. if i try to give in the TO table it wont allowed me.(throwing error:Total of scheduled quantities exceeds quantity to be placed into storage)but i give that exact quantity only. any configuration i have to give.( i maintained palletization inmaterial master also).
Thanks
Muthruaman.DHi,
Check on it:-
http://www.sapfans.com/forums/viewtopic.php?f=6&t=76479
http://help.sap.com/saphelp_40b/helpdata/EN/c6/f844694afa11d182b90000e829fbfe/content.htm
pherasath
Maybe you are looking for
-
How do find Oustanding Sales Report and Collection Report for A/R Invoice
Dear All, I need to find the Sales Outstanding amount and Collection details like Check or Cash Or RTGS this is including A/R Invoice Amount and JE Pending Amount. Is it possible? Kindly any body let me know some idea or if any sql q
-
Often forced to restart ....
Hi, The last few weeks when opening the computer quite a few times gets grey and a display ask me to restart ..... does anyone know what this means and how to change this? Gr. Ron.
-
BW add on. Business Explorer on Mac platform
Hi all, Are all the BW add ons, including Business Explorer, available for the Mac platform? ie: Mac OS X + Excel for Mac. Any help will be appreciated. Best regards
-
Hi, I have the text structure like HDR+col1+col2+... DTL+col1+col2+... DTL+col1+col2+... HDR+col1+col2+... DTL+col1+col2+... DTL+col1+col2+... DTL+col1+col2+... DTL+col1+col2+... HDR+col1+col2+... DTL+col1+col2+... DTL+col1+col2+... DTL+col1+col2+...
-
Advanced Replication of Spatial data is not possible using Oracle 8i. Is it possible with later versions of Oracle DB or perhaps particular patchsets of 8i?