Function modules to open a CRM activity

Hi all,
What are the Function modules available to open a CRM activity ( in change or display mode) when we have the GUID of the activity.
The "BAPI_ACTIVITYCRM_CHANGEWDIALOG" is working from a standalone program but it is not working when I am already in the activity through a transaction.
Regards,
Nag

Try using function module
BAPI_BUSPROCESSND_CHANGEDIALOG

Similar Messages

Can generic function module extractions possible with CRM data sources.

Hi Friends,
can generic function module extractions possible with CRM data sources.
90% extractions are generic function module extractions.
How is it possible without BW adapters..
It's very urgent ...Please.
Thanks,
Basava Raju

Hi Madhu,
Just curious ... if you already have a generic FM extractor then just go into it and find out where it is reading the data from. If its reading data from the CRM system then thre is no need for any BW adapter ... just in case you need any ABAP help ... post here ... I may be of use to you.
Best regards,
Kazmi

Debugging RFC function module from ECC to CRM

Hi All,
My requirement is to debug an RFC function module present in CRM(7.0) system from ECC(6.0) system. A report program in ECC will call CRM custom FM. I found many posts in SDN with the same issue and tried to implement suggestions provided there. But I couldn't succeed. The approach I followed is:
I logged in to ECC report program and kept an external breakpoint just before the function module call.
I logged in to CRM system, opened the function module and kept an external breakpoint there.
In both the systems I provided the dialogue userid( id through which I log in to SAPGUI) in the system->settings->debugging option.
In CRM I activated the external break point in transaction SRDEBUG.
Now when I execute the report program in ECC, control stops at the breakpoint. If I press F5 at the function call, control is not going to the external break point set in the CRM FM. I am getting output of FM directly.
I tried with different settings like turning on the check box for IP matching and session breakpoint active immediate, switching to classic debugger etc. I also tried to provide the RFC user id instead of dialogue user but system throws exception saying only dialogue userids are allowed. I found that by inserting an infinite loop statement, control goes inside the RFC CRM FM but I prefer not to change the code.
Please let me know if I missed anything.
Thanks and Regards,
Naren

Hi,
Debug RFC calls
When an RFC function module is called it is usually not possible to debug the call, using the below techniques we can achieve the same. For this example we are calling an RFC enabled FM in ECC system from CRM system.
Scenario 1: Calling a custom RFC FM
STEP 1: Add an infinite loop in the remote custom Function Module (adding a u201CDO. ENDDO.u201D statement at the start of the FM would be enough).
STEP 2: Execute your program in the CRM system. The execution stops at the RFC call, because of the infinite loop.
STEP 3: Now login to the ECC system and go to transaction SM51 select the process which is executing the RFC and navigate to the menu: u201CProgram/Session->Program->Debuggingu201D this triggers the debugger session in a separate window.
Scenario 2: Calling a Standard RFC FM
When we are debugging a standard program we cannot add the infinite loop, hence we cannot go to SM51 and debug the work process. The RFC destination for the ECC system has a User specified, the RFC function module gets executed using this users credentials. Usually the basis team set up the RFC user as non Dialog user, this does not allow debugging. Contact your Basis team and get this changed to a dialog user enabling you to debug RFC function calls via the normal debugger.
Note: User name configured in the RFC destination (transaction SM59)
Note: User type for the RFC User (transaction SU01D)
Hope this will be helpful..

Function module for open sales order and open PO

hi all,
can anyone please tell me that is there any function module to get open sale order and also for open purchase order?
regards saurabh.

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Function Module for open Purchase Order & Sales Order?

Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.

hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen

Function module for Open Sales Orders.

Can u any one tell me is there any standard function module to
retrieve OPEN-SALES orders. I tried to debug VA05 but not of use...
Thanks in advance,
Sanjay.

hi
you can get open sales orders from vbuk and vbup
    SELECT
         A~VBELN
         A~GBSTK
         B~GBSTA FROM VBUK AS A
         INNER JOIN VBUP AS B
         ON AVBELN = BVBELN INTO TABLE T_OPENS
         FOR ALL ENTRIES IN T_VBELN WHERE A~VBELN = T_VBELN-VBELN
        AND A~GBSTK IN ('A','B')
         AND B~GBSTA IN ('A','B').
in t_vebeln table is haveing sales orders by user selection you can get it like this
regards,
varma

Function Module to open a new session displaying a method of a class

Hello All,
I have a method A of class B.
Now, in my current session, I have a button. When the user clicks on this button, what I expect is that a new session be opened and in the new session method A of class B be displayed.
This is similar to the debugger, wherein, in the debugging mode, we can bring up the context menu in the Source Code (Edit Control) tool, and then select "Go To Source Code".
So basically, I am looking for a Function Module which does the same.
I came across Function Module CC_CALL_TRANSACTION_NEW_TASK, however, this will only create a new session.
I could specify the transaction as SE24, but it then opens a new session with this transaction. That is it.
My objective is to display the method of a class in a new session.
Is there any Function Module in this case?
Regards,
Mithun
Edited by: Mithun Kamath on Aug 9, 2011 5:35 PM

Hello Sandra,
Thank you very much. That was exactly what I was looking for.
However, instead of calling EDITOR_PROGRAM directly, what I instea did was the following:
1) Created a RFC enabled Function module.
2) Inside this function module, I wrote the following code:
SUBMIT tpda_editor_start AND RETURN
   WITH prgm = is_alert_det-program_name
   WITH incl = is_alert_det-include_name
   WITH dynp = space
   WITH line = is_alert_det-line_no.
The parameters above were similar to the one proposed by you.
Borrowed the above from the class CL_TPDA_SERVICES_TOOLS, method NAVIGATE_TO_SOURCE.
The above is basically called in the debugger, when we use the context menu in the editor tool and invoke the "Goto Source Code" functionality. This eventually calls the EDITOR_PROGRAM FM.
The reason why I did this is because when I was testing the FM, it did not allow me to specify the include as CL_TEST=====CM01. I do not know why, probably I was doing it wrong. But it gave me a message saying that the object does not exist in table TADIR.
Anyway, I did the above steps and it worked exactly as I wanted it to.
I would like to thank you again.
Best Regards,
Mithun
P.S. Forgot to add, I called the above RFC enabled FM as a new task.
Edited by: Mithun Kamath on Aug 10, 2011 4:19 PM

Function module to open share drive path

Hello Experts,
Can any one tell me any function module or any solution to open share drive path by pressing F4.
Thanks.

hi,
1. Try defaulting the intial folder with the path like 'IP_address\Folder1\' while opening the file.
2. Utilities->Settings->ABAP-Editor->Editor->Path for Local Editing. try to change and point it to the network drive needed.
Regards,
Akhila Bidare

Function module for Opening Balance day wise

Hi,
I am preparing vendor ledger report for day wise .
For example : i/p fields are : Lifnr , Budat,Bukrs
O/p fields are : Opening balance ( Before the date of lifnr Closing balance ).
                      Debit
                      Credit
                      Closing Balance ( Opening balance + D/C).
For this Opening balance i require the function module .
Please help me .
Regards
Nandan.

Hi,
My requirement is Vendor balance Report according to Posting date wise.
o/p fields are
blart budat augdt belnr openingbalance ClosingBalance Credit Debit
Credit is when schkz is 'H'.
Debit is when schkz is 'S'.
Closing Balance = Opening Balance + Credit / Debit
Regards
Nandan.

Function modules for open quantity

Hi Experts,
I am having requirement,i have to calculate the open quantity for particular item in the range of dates like 01/02/2008 to 28/02/2008 and 05/03/2008 to 05/04/2008(depending on the user input).
I have searched function modules:
MONTHS_BETWEEN_TWO_DATES
FIMA_DAYS_BETWEEN_TWO_DATES
Please suggest me,Which of this function modules suits for my requirement?
Is there any bapi for calculating open quantity for particular period of time?
Regards,
Bharath.

Hi ,
Open Qty of particular item ? is that PO or SO?...
regards
Prabhu

Debugging of ABAP Function Module through ISA Application CRM B2C 4.0

Hi Experts
There is way to Debug ABAP FM through ISA CRM b2c Application by Modifying some XML Files as per Extn Guide.
I tried modifying the <APPLICATION_HOME>\WEB-INF\xcm\customer\modification\modification-config.xml After that I restarted the Application .
But it is not Breaking for Both Statefull & Stateless FM after running my Application.
With Some Help i found that if we try it on Remote System ( Means SAP GUI has to in Same System where CRM is Installed ???????????). but that is not Advisable Right !!!.
So if i am able to Debug ABAP Function Module through ISA Application from any Other remote System.
I think it will be very Useful.
Thanks & Regards
Ravi Sah

Ravi
It is other way around !!!
You should have SAP GUI installed on the machine in which you start(access) your B2C Application. This enables for ABAP Debugging.
We have tried this and works fine for us !!!
Thanks
Jack
Allot points if my post helps !!!

FUnction Module For OPen Reservation

Dear All,
CAn you give me details of a fuction module which will return me details of open reservation items.
deepak

Hi ,
In EKPO Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Purchase Order Qty.
In MSEG Table u select this fields Purchase Document no and Item no of Purchsing Document , Material no , and Qty.
Both Tables having Purchase Document no , So Purchase Doucment no throguh u will get the Material and qty , Finally u Subract the both Material Qty's .
u will get the Open Po For particular Material.
If ur not getting ,Inform me .
Regards ,
Shankar GJ

Error while activating function module

Hi,
I copied a standard SAP function module L_TO_CREATE_DN.
When i activated the function group it throws an error saying that " Field "I_COMMIT_WORK" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement".
All the global data has been copied properly in the TOP include but still while activating the function group we are getting the above said error.
If anyone has encountered same kind of issue.......Please guide.
Thanks and regards,
Ramesh

I was also facing the same issue, when I tried copying just 1 or 2 FM's from that FG L03B.
Finally, I copied the whole function group, including all FM's into Z FG, and FM's, and it got activated w/o any hitches. Looks like there is lot of dependency between the includes and FM's code.
Regards
Deepthi

Function Module to get Active Serial Numbers of Material Stock

Hi Experts,
Do we have any function module to get all the active serial numbers of Material Stock? Or any suggestions on how to get these through SQL Queries?
Thanks a lot for your help!

GET_SERNOS_OF_DOCUMENT

BAPI/Function Module in CRM to create Credit Memo

Hi,
It will be great if some one can help me in finding out whether there is any BAPI/Function Module in CRM to create Credit Memo?
Rgds,
Sam.

Hi Venkatesh,
Thanks you for your post, your post has helped me a ton in my work, Infact I was working on BAPI to
Create Credit Memo request i.e BAPI_SALESORDER_CREATEFROMDAT2 as expected i got the same error as "Unpermitted combination of business object BUS2032 and sales doc. category K" and i tried on other BAPI it worked, Just i need to know BUS2032 doesn't support Credit Memo Request, How we can find it
to what Sales document it support?

Function modules to open a CRM activity

Similar Messages

Maybe you are looking for