Functionality in SAP to allow you to print multiple copies of a form

I've been asked by a SD functional team member how to:
This is the table and field names for Number of Messages functionality in SAP which should allow you to print multiple copies of a form at one time.
Program Name:SAPMV13B
Screen #:0211
Transparent Table: NACH
Field Name: ANZAL
Data Element: NA_ANZAL
How do I go about setting up this functionalilty?
Thanks,
Laurie

Hi Laurie,
   There are three possible ways -
   1. Predefined number of copies - You can define number of copies in the print parameters while creating condition record. Ask you functional team member how they are setting up condition records. You have an option to setup print parameters on condition record screen. This is the only option if you are using output determination.
   2. If you have an isolated print program then you can choose to let user enter print parameters by using parameter " DIALOG = ' ' " in "open_form".
   3. If you have an isolated print program and do not want to let user control other print parameters you can take input from user ( or hard code ) number of copies and use that in parameter " OPTIONS " in "open_form".
Cheers,
Sanjeev

Similar Messages

HOW DO I PRINT MULTIPLE COPIES OF ONE PHOTO ON A SINGLE PAGE?

Since Apple has not made this feature available, I am not able to print multiple copies of a single photo on one page. HELP suggested I download Portraits and Prints which I could use for free. However, I have downloaded this and note that DEMO watermark will appear on all photos unless I purchase the program. Is there a way to print without the DEMO watermark using this program or is there another free program that will allow me to print multiple copies of a single photo on a single page? Please help as I have spent 2 hours on the phone with Apple and it has gotten me no closer to a solution - something I could easily have done on the older versions of I Photo. Thanks!

Sadly, I have no pull down menu when I click on Customize or settings? I am using IPhoto 08 vers. 7.0.1. I was told by Apple HELP that this feature is not yet available, even though the instructions say to do exactly what you have said. But there is no pull down menu and no option to print multiple photos. It says print a single photo and it is clicked and I cannot unclick it. Any help would be appreciated. Do you actually have a pull down menu with Print Multiple Copies of One Photo as an option? What version of IPhoto provides this? Apple seems to think it is not available and it certainly isn't available on my system. Any help will be appreciated. Thanks.

How do you get rid of white space when you are printing multiple pages to one sheet of paper?

How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
Thanks

Take a look at Quite Imposing.

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen it but cannot find it again. Help.

How do I get to the screen in Mail that allows you to delete multiple "Previous Recipients" from the list? I have seen this screen but cannot find it again. It shows all of the "Previous Recipients" in a long list. You can edit the list by selecting multiple names or all names with the command key and delete. Help.

Launch the Mail app on your Mac and go to Window>Previous Recipients.

Hello, I'm wondering if any of you know whether or not there's an App that allows you to watch multiple video formats online (like online TV series, movies etc) Thank you so much

Hello, I'm wondering if any of you know whether or not there's an App that allows you to watch multiple video formats online (like online TV series, movies etc) Thank you so much

SgtChevelle wrote:
how do you decide which structures to use?
Trial and error.
I wish I had a better answer for you, but that pretty much encapsulates it. There is some, but not much, good wisdom out there, but it takes a significant amount of experience to be able to recognize it. The software development community if currently afflicted with a case of copy-and-paste-itis. And the prognosis is poor.
The solution is to be brutal to yourself and others. Focus on what you need and ignore everything else. Remember that other people have their own needs and methods and they might not be applicable to you. Apple, for example, can hire thousands of programmers, set them to coding for six months, pick the best results, and have the end-users spend their own time and monety to test it. If you don't have Apple's resources and power, think twice about adopting Apple's approach. And I am talking from a macro to a micro perspective. Apple's sample and boilerplate code is just junk. Don't assume you can't do better. You can.
Unfortunately, all this takes time and practice. You can read popular books, but never assume that anyone knows more than you do. Maybe they do and maybe they don't. It takes time to figure that out. Just do your best, ignore the naysayers, and doubt other people even more than you doubt yourself.

I am unable to print multiple copies on 1 page

I have a macbook and I used to be able to print multiple copies on 1 page. It had a selection on the bottom right. Now something has changed with the format. It allows me to select multiple copies, but only prints one.

Hi,
In order to print multiple documents on one page, you may follow the steps mentioned below:-
Press Command+p- Select multiple pages or booklet
If you are not getting these options, please send us a screenshot to better understand the issue.
Regards,
Nakul

Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all worked well with the PCL6 driver and that is the only driver that was used
They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
The pcl 5 driver prints one page and then stops printing, no errors.
When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
I have not tried the PS driver with the mopier disabled.
The PCL6 driver stills returns the pcl xl error with the mopier disabled.
The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
Anybody else have a similar issue and got theirs fixed?
Thanks in advance.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

In iPhoto 9.5.1, how do I print multiple copies of the same photo on a sheet ?

In iPhoto 9.5.1, how do I print multiple copies of the same photo on a sheet ?
I am somehow missing the "settings" which allowed me to do this in earlier versions.
Grateful for any hints. Thank you. Znon

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
You can only do it by duplicating the photos "n-1" times to make "n" prints and selecting all copies then print
LN

6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Printing multiple copies per page, not multiple pages per sheet

How can I print multiple copies of page per sheet of paper?
I've got an image or PDF that I'd like to print 4 or more of per sheet of paper. But it can easily fit on one sheet. When I choose to print 4 copies and in the Layout section choose 4 copies per page what I get is for pages printed out with the image scaled down to a quarter of a page.
What I'd like is the one image scaled down and printed 4 times on a single piece of paper.

I don't completely believe that this is completely
due to the drivers from the printer manufacturer.
Nor did I say that it is. The software from which the doc is being printed is
even more important re page layout options.
Your statement of "It is a function of the printer driver..." is what led to that misunderstanding.
I completely agree that the idea of 'print to PDF' is misleading and that I was mislead that all the print dialog options (like the quartz filters that do work in outputting to PDF and the # of copies that do not) should apply to creating PDF files using the print dialogue. It now says 'save to PDF' in 10.4 instead of 'output' or 'print'. I think some of my confusion is carrying over from UI decisions in 10.3.
Obviously it wasn't designed to work this exact way
or it would work this exact way.
I have no idea what this statement means.
It's stating the obvious in reply to your statement of the obvious ("the feature you are trying to use isn't designed to work that way."). If it were designed to work in the manner that I was wanting it perform I would have never posted a question about it.
You can say it's not commonly done and that would
apply to anything other than printing off one full
sized copy of any single page. Using Quartz filters
isn't "commonly done" but it's available.
Not true... mailing labels, multipage spreads, thumbnails, reductions/
enlargements, ad infinitum are far more frequently done than printing
the same content on the same sheet multiple times. As I said, however,
there are provisions for doing so when the need arises.
You missed the point. Functionality is presented that is far less utilized than what I was desiring to do on this platform/set of applications as compared to other platforms/sets of applications. This is why I specifically mentioned the quartz filtering. I have personally met only one other person who uses quartz filtering yet I know over a dozen that want to print in the manner I originally posted about.
I'm sure you have seen such results & I have done
the exact same type of output hundreds of times on
both Windows & Mac platforms as well as others...
but not in the manner you are attempting to get it
done. As you've found out, that just doesn't work.
And I've seen it performed in the manner I was attempting, furthering the frustration.
In any program you typically do specify page layout
before number of copies... in fact, that is the cruxt of the
issue. But getting the same content to repeat on a single
page is not a matter of page layout and is not a function
of the print operation unless you're dealing with commercial
devices.
I guess I've just been spoiled by those big office Xerox machines. I never thought of that functionality being at all special in any way.
Thank you for the assistance.
PowerMac G4 Digital Audio, iBook G3 500, iPod, radioShark Mac OS X (10.4.3)

Printer issue - could not print multiple copies

Hello Gurus,
Good day!
We not able to print multiple copies (2 or more) in SAP level but we were able to print multiples copies using non SAP applications (i.e word, excel).
I already checked in UNIX level and I dont see any stuck spools.
Can you please help me on how can I resolve this issue.
Appreciate your help.
Thanks!

Hi,
In order to get multiple copies of prints from SAP you need to make following configuration.
go to SPAD
select the printer, from which you need to get multiple copies of prints.
Double click on it,
Now you will see the details of the printer with tabs like
Device Attributes , Access method , output attributes , Tray Info.
now select output attributes
there you will see Copy Counter with drop down selection. in that select
PASS COPIES AS SEPARATE OUTPUT REQUEST(IN SAP SYSTEM)
Please let us knwo if you have any other issues,
Regards,
Ravi

Printing multiple copies of 3 page BOL in Duplex mode-

Hi Gurus!
I have created a smartform to print the BOL on front side and terms and conditions on back side. I used the duplex mode to print and it works perfectly fine. When I have a BOL with 3 pages of information , it prints the items on the front side and terms and conditions on the second side and it does everything absolutely correctly.
At our organization we always print 5 copies of any BOL and that is when the problem arises. When we do a printing of the BOL form with number of copies set to 5 , it prints very akwardly with the settings. First it prints page 1 front and same thing on the back, then again the first page on the first and its back and then front on the third side , then similarly 5 sides of terms and conditions and then followed by 5 sides of page 2 items and followed by 5 sides of terms and conditions, which is very akward. Actually it should print first set with page 1 and TC on back of it , then Page 2 and TC on its back and page 3 and TC on its side like it does when I make a single copy.
Is there any settings that I am missing thats making the above happen when I print multiple copies of the BOL?
Please suggest.

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

Print Multiple copies of report, and resetting Page number for each copy.

Dear frnds!
i am using developer 6i reports i have a problem.
i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
1 - for user copy
2- gate copy
3- accounts office
4- office copy
any body please tell me the solution "i am using oracle 9i and developer 6i"
Thanx
Ibrar

Hi,
I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
<?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
<?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
HEADER
PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
PSN Detail: <?$G1/PickSlipNumber_ID260?>
Page 1 of 3
<?start:body?>
BODY
<?$G1/LineNumber_ID6?>
<?end body?>
FOOTER
<?end for-each?>
<?end for-each-group?>
XML:
<R5542520>
<Pick_Slips_Detail_Lines_S24>
<Header_Custom_Section_S24>
<Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
<PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

Printing Multiple Copies of Same Image on Multiple Pages

I have Photoshop Elements 11 on a Windows 8 platform. I can NOT get it to print multiple copies of the same file on multiple pages. I need one file printed on one page multiple times. I have tried the CTRL-ALT-SHIFT and nothing changes. It still just prints one and is done.
I use this for label printing, so I need it to print more than one copy at a time. It also is not saving the settings, so everytime I hit print, I have to readjust the print requirements. This just is not going to work when you need to print a few hundred copies at a time.

You can create your own picture package, if none of the options in the PSE print window>Type of Print work for you. Just make a blank file, copy/paste your image and alt drag it to make multiple copies. You can use the move tool to position things as you want them.
Generally speaking, though, for something like label printing, it's simplest to use PSE to create the image, then use your word processing/desktop publishing program to print the actual labels.

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

Functionality in SAP to allow you to print multiple copies of a form

Similar Messages

Maybe you are looking for