6110 All-in-one sometimes will not print multiple copies

I have had this problem for sometime now. I searched the forum and found the Mopier solution for laserjets, but the 6110 does not have this setting. The same question regarding the 6110 went unanswered in the only post I found for it.
I am using the 6110 on WinXP Pro and connected by USB
Often times when I try to print multiple copies of a document (MS Word or MS Works as examples) I check 2 copies in the selection box but the printer only prints one copy. I then have to click Print again. What is strange is, sometimes it performs fine and others it will not print more than one copy at a time. Sometimes it SEEMS that if I change the "collate" checkmark it works, but proper functioning does not seem to be able to be recreated every time.
I do not get any error messages, the darn thing just acts like I have 1 copy selected rahter than two. I notice that when this happens and I go to print a second copy, the dialogue box has reverted back to 1 copy, but in those few times when it DOES print 2 copies, if I go back and select Print, it still shows 2 for the number of copies.
Any ideas? Thanks in advance

Hi there,
To make sure the software side of the house is in order lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

HP Deskjet all-in-one F4440 will not print

My HP Deskjet all-in-one- F4440 will not print. I have put in a new color and a new black cartridge. It clanks loudly when it moves back and forth. Finally it stops and then pulls plain paper through as though printing on it - does this two or three times. then it pulls plain paper halfway through and stops. I have to tug and carefully pull halfway paper back out towards front to remove.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? Are there any error messages or flashing lights? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Deskjet All in ONe L7650 will not print black only --

Started doing this with previously working black cartridge, updated software--prints, but blank page comes out when set to black ink only; prints other colors.
Changed black print cartridge and still will not print black. Diagnostic page prints other colors.
Printhead health shows good for all colors.

What brand of printer cartridges (not printhead) did you use the last time you changed them? I don't know if it was because one or both of my printer cartrdiges went dry, but I put new cartridges in (not printhead) and it improved somewhat--I kept trying to clean the printheads but it seemed to never get resolved.
I refuse to have to buy new printheads. I tried several cycles of "align printheads" "clean printheads" and never got a decent print out, but I did get to the point of all the colors printing although magenta printhead makes printing errors and so I never know what I am going to get with color anymore.
It seems to be at its worst when printing in "draft" but in normal or best (with more ink coming through) it seems better--the higher ink volume seems to cover some of the problems with the printheads.
So, I am justing using it "as is" and not replacing the printheads--because it is a waste and yes, could almost get a new printer for this cost.
I wish I had never gotten this All in One and just stuck with the old 970 csi and the old UMAX scanner, which was a better scanner, but thought I would "save some space" by getting this since it scans legal, which I needed.
Just keep trying to reseat the printheads (also trying to reclean them, which seems to make it worse) and keep printing out those "tools" alignment and cleaning procedures.
But no help from HP.

Hp all in one F2400 will not print!!

my printer will not print, all it will do is feed multiple pieces of paper through and print nothing and eventually getting jammed also the printer cartlidge goes back and forth making loud noise. i have no idea what could be wrong, it worked fine a few days ago. any suggestions would be appreciated.

I would try running the HP Print Diagnostic Utility. Go to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...= and see what part fails.
The PDU checks the connectivity, spooler condition, online status, device manager, print queue, ports, driver, conflicts, and default printer.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

Officejet Pro 8600 will not print multiple copies

When I first set up my HP Officejet Pro 8600 I could print multiple copies. Not sure when, how, or why but I can no longer print more than one copy of any document at a time regardless if it is one page or 100 pages. I tried to update the drivers but the update failed as it said it could not uninstall the printer. When I did the error reporting it said there was no solution.
My OS is Window XP Home
The printer is connected via network.
I print mainly from MS Word 2010 and Adobe PDF files and I have the same issue from either program.
This question was solved.
View Solution.

Since the drivers and software refuses to update automatically, force it to. Uninstall all of the printer software and install it back using a fresh download. That will ensure that you have the latest driver and software for the printer installed and eliminate the need for updates for a while. I'll link them below. If that doesn't fix the problem with multiple documents not printing, try using an alternate driver for the printer. I'll link those instructions below. Let me know what happens.
HP Officejet Pro Full Feature Software and Driver
How to Assign Alternate Print Drivers in Different Versions of Windows
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP printer will not print multiple copies of docs using new HP Pavilion HPE Series PC.

I purchased a new HP desktop computer with Windows 7. I connected my existing HP laser jet printer to the new PC and the drivers installed successfully. When I want to print multiple copies of a document the printer only prints one copy and stops. I can print multiple copies on my Kodak color printer from the new PC. I did not have this problem with my old PC. The issue only exists between the new PC and the existing HP laserjet printer. I have checked all printer preferences and settings to no avail. Any suggestions for further trouble-shooting?

printer model? is your win 7, 32 bit or 64 bit?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

My deskjet All-in-one F300 will NOT print copy docs, or from My Docs or attachments

This printer will only print e-mails or direct from HP essentials screen but nothing else. Ink cartridges are ok.
Need help ...David Mullin

Are you printing it directly from a website? what is your computer's OS?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

My HP Photosmart all in one C4480 will not print from PC

I can't get my printer to print from my computer. Everything shows it's hooked up fine and ready to go. Yet when I try to print, nothing happens! Driving me crazy. Not sure if this is simply a bad printer or what. I've tried everything from unplugging, unhooking, rebooting, reinstalling, updating drivers and everything else. I've run out of ideas. Any new ideas would be appreciated.

Oddly @FlaBoy34, I did not get a notification that you had responded. I do see now that the issue you were experiencing remains. I suggest calling us to discuss your in/out of warranty options.
If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
HP printers generally have a 1 year warranty from their purchase date, you can verify the warranty using the following link if you would like; warranty check.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

After installing McAfee encryption on my XP laptop, my OfficeJet All-in-One 7410 will not print.

I have unstalled the software and now I can not reinstall the software. The diagnostic tool can see the printer, but the install software can not, even when I enter the IP address. I've turned off the firewall. I've connected the printer directly to the router. The only way to use the printer is through the USB which is not acceptable.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Business Inkjet 1200 will not print multiple page jobs

Product Name: HP Business Inkjet 1200
Product Model Number: C8154A
Product Serial Number: TH49M1403W
Service ID: 15148
Firmware version: 20041001 MMR2016W
Regulatory Model Number: SNPRC – 0401 – 01
Date: Sept 22 2004
HP Business Inkjet 1200, XP SP2, connected via Draytek 2710n router USB port will not print multiple page jobs. Will only print 1 page pdf, <3 page word docs.
Produces error - 'this document failed to print'
Works fine printing multiple page jobs from other PCs on the network. Other PCs are configured same.
Configured to use TCP/IP port 192.168.1.1 (router/gateway IP), LPR, Queue "p1"
HP Printer Diagnostic Utility shows no problems.
Tried:
Remove printer and drivers and reinstall. Cleaned temp spools folder. Checked amount of disk space, page file, ram. Reboot variously router, printer, PC. - No luck.
Any response much appreciated, thanks in advance.

I can't print my complete e- mail, only the first page. i have several pages of mail to print with all of the headers but am not able to do it on hotmail. it seems like i was able to do it before. it is import that all of these print because of current issues i am dealing with .
Thanks, Ron

Dell C1765 printer will not make multiple copies in Yosemite

I have installed Yosemite on my mac mini. My Dell C1765 color laser printer will not make multiple copies in Yosemite. It will do so in Windows. Any suggestions?

PS: I forgot to add that my computer is using Windows 7

One document will not print in color - all other docs are printing fine

I just purchased an All Ine One Officejet Pro 8630. It will not print my proposal forms in color - although invoices and every other document that requires color seems to print just fine. The proposal form is formatted in in old Microsoft Access file. Not sure that this would make a difference because I have had no problems with printing it in the past with color. Any recommendations would be appreciated. Thank you.

So when you do print, does it come out in a grey scale with various shades of grey instead of the color or in just solid Black and White format? Also, on the PDF front, you can install either software I mentioned and that will allow you to "Print to a PDF File" and then you can at least view the PDF to see if your printing system from Access is outputing in color or not. Just a troubleshotting idea.

HP all-in-one c301 will not save scanned doc in Mavericks upgrade

I have recently installed the free OS X Mavericks upgrade to my Macbook Pro. My HP all-in-one c301 will scan, but the scans do not save. The saved pdf looks like a bunch of gray lines when I reopen the saved file. Has anyone already found a work around? Unless I missed a webpage, HP does not have drivers or apps for Mavericks at this time.
It seems that nearly everything related to any imaging has stopped working with the new OS. (This situation is not good for someone who uses their system for photography related work only.)

Since maybe 1 in 10,000 are having such experiences, we have to guess that there is something wrong/corrupted in your Mac's Mavericks install. This happens (just slightly) more often, now that everything is downloaded from the internet.
Try some generic repair steps:
1) Restart in Recovery mode and use Disk Utility to repair the hard drive and permissions.
OS X: About OS X Recovery
(Just read the first paragraph about how to get into Recovery)
2) Download and install the 10.9.4 COMBO update (this isn't from Software Update - it replaces all the files from all the updates)
http://support.apple.com/kb/DL1755
3) Reset the Printing System, and re-add the printers (& scanners)
OS X Mavericks: Reset the printing system
You should experiment and see if things improve after each step.

HP photosmart all-in-one C4580 will only print test page

this C4580 has been installed wirelessly on my Toshiba notebook and my Hp desktop and my husband's Toshiba notebook for over a year. We move the printer across the room to a different electrical outlet (no extension cord...directly into wall plug). It will print beautifully from HP desktop and husband's notebook. Will not print from my notebook. Tried uninstalling printer on my notebook and reinstalling (I have done this 3 times so far). After re-installation, the test page prints perfectly but any further attempt to print a page or a document goes nowhere. The devices and printers display shows the printer as ready and with no documents in queue. Anyone know what I should do next? POI: the 2 notebooks are windows 7 and the desktop is XPPRO

Hi I hope you are doing well and very sorry to learn that you are having this issue
If you still having this problem I will do my best to help you.
Please go here and select the operating system to get latest firmware for printer.
GO here
Run this utiliy, http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
Hope I can be of help;
RobertoR
remember ↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Font Book will not print multiple fonts

I am having an issue with Font Book. I can print one font at a time but if I select multiple fonts (from a collection) it will not print, it just locks up and the print dialog box never opens. Does anyone know why or is there another free application that will print fonts?

Font Management in OS X

6110 All-in-one sometimes will not print multiple copies

Similar Messages

Maybe you are looking for