Funds center does not exist in FM area MOF1 and fiscal year

Hi Consultants,
I have configured the derivation strategy in FM and other relevant configurations. When trying to post a GL transaction in FI, This error message came up;
Funds center 0000412000 does not exist in FM area MOF1 and fiscal year 10/13/2010
What did i not get right.
Please reply.
Thanks.
Ekemini
Moderator: I believe, the error message speaks for itself. Please, avoid asking basic questions

Hi,
That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
Regards,
Eli

Similar Messages

  • Funds center 000000 does not exist in FM area  and fiscal year 15.06.2009

    Hi Expert,
    When I tried to cancel Invoice via MR8M, I get Error message "Funds center 000000 does not exist in FM area  XXX and fiscal year 15.06.2009"
    Please tell me what is wrong here.
    Thank you.
    Regards,
    Henry

    Hi,
    That's the message from Funds Mangement component. You have to check whether the derived fund centre is the right one and if yes, create it via FMSA transaction.
    Regards,
    Eli

  • Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

    Dear Expert,
    We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
    Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
    Message No-F6580
    Also when ever we are trying to post an FI document the same error message is coming.
    Please advise with T-Code.
    Regards,
    Alok

    Dear Mr Srinu,
    The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
    1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
    2. No Funds center entered /derived in item 00010(1020/302401/)
    Pl help,
    Regards,
    Alok

  • Error message FI 759: Fund does not exist in FM area

    Hill!
    I have to make a distribution in CO-OM (tr KSV5) according to fund
    But if I customize fund as sender, choose fund from the fund catalog  and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

    Hi Irina,
    As per the note 489315, you must choose a layout that contains the exact data for the active objects.
    When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
    If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
    Once you add the field Fund and set it to optional you should be able to use planning.
    Note 555134:
    3.  The fields of the Funds Management are defined as 'Required entry
        fields' in the standard layouts, in other words depending on the
        permissibility of the initial value for a field an entry is always
        demanded. To prevent this there are two options:
        a) Copy the desired standard layout into an own (transaction KP65,
           KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
           set the corresponding field to 'Optional". Then, add this layout
           to your planner profile with transaction KP34.
        b) Implement the attached program ZK555134 (correction instruction
           461025). After the entry of planning area and layout all fields
           of the Funds Management are set depending on your selection of
           'Optional' or 'Not optional' (standard system). Like this you can
           also change standard layouts. The check for the fields for which
           'initial' is not a valid value is still carried out.
    If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
    If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
    If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required  entry field in CO, FI-AA and HR for all company codes in the client concern.
    Please also refer to notes 625262 and 659086.
    or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
    I believe this will resolve your issue.
    Best Regards,
    Vanessa.

  • Cost Center does not exist for a particular period - Solution

    We have encountered an error in the subject,
    COST CENTER does not exist for a particular period
    Solution:
    1) Either extend the Posting period for the invoicing  date
    2) Or enter the Cost Center as PO number in Sales Order
    Please do add your comments if there are different ways to solve this error

    The Post contains a solution

  • Profit Center does NOT exist on 08/24/2010 (Message KM700)

    Hello,
    I am using resource related billing.
    I am adding a Contract Line Item to an existing contract.
    In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
    of 01/01/2011.
    The Contract Header has a document date of 08/24/2010
    After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
    Profit center ###/##### does not exist for 08/24/2010
    Message no. KM700
    ###/##### = Controlling Area/Profit Center
    Is there a setting that can be switched off so that the warning is NOT displayed ?
    Thanks
    Ermanno.

    If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
    Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
    Regards,

  • Wrong error message no. F6556 - Fund Centre does not exist but it do exists

    Hello Gurus,
    I am trying to transfer an Old PO to Funds Centre by changing the delivery quantity in PO but the delivery date in the PO is of June 2014. I have defined the derivation strategy and system is deriving fund centre correctly but it says that Fund Centre does not exists on delivery date which is 30.06.2014. I have created fund centre from 01/01/1900 till 31/12/9999.
    I tried to use FMCN it also gives the error message saying that fund centre does not exist even on current date.
    For testing I posted some FI document to that fund centre and it posted.
    I am not sure why it is giving error only for PO (PO has a account assignment to project/WBS).
    Thanks in advance!
    Regards
    Rohit Goel

    Hello Eli,
    The problem was that WBS was using the wrong cost centre with two leading zeros (User created wrong cost centre in test system with 8 character which means 2 leading zeros as prefix) but as per the cost centre structure it should have only one leading zero and rest nine characters must be numeric. I have created a fund centre with one leading zero and that's why system was giving error when using derivation strategy as it is picking cost centre from WBS master data but fund centre was created with one leading zero hence the error was coming. when I was defualting the fund centre specifically for the WBS it was picking because I was giving the correct fund centre.
    You also recommended something about leading zeros but it was not fully applicable in our case as we have defined the derivation startegy of populating the cost centre in fund centre field and our cost centre is of 9 chararcter (in table it shows with a leading zero to make it full 10 character) but when it gets populated in fund centre field it gets populated with leading zero means it takes a leading zeros into consideration when it gets derived from cost centre. For example if my cost centre is '123456789' the fund centre gets populated as '0123456789'
    But I got the clue to my problem from your hint of leading zeros.
    Thanks Once again!
    Regards
    Rohit Goel

  • Getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING

    Hi Champs,
    I am getting Cost Center Does not exist error when executing BAPI_ACC_GL_POSTING_CHECK.
    But when I checked for the particular Cost center, it is mapped to the same company code the program has got executed.
    Example:
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist
    Cost center 1000/150402 does not exist on 17.11.2009.
    Cost center 1000/150402 does not exist on 17.11.2009.
    Please let me know if you have any guess on this. It is very critical issue for me.
    Thanks for all your help in advance.
    With Best Regards,
    Ravi kanth Yechuri

    Use 0000150402 not 150402 .
    Rob

  • Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, an

    Hi,
    i am creating schedule agrement or 1 st april 2009 getting error
    Commitment item 233000 does not exist in FM area ZK01, fiscal year 2009, and variant

    Hi
    Try
    u can do one thing create commitemnt item for the year 2009. public sector management - Create commitmen titem
    then u assign commitment item to GL in Fmderiver Transaction code
    then u post
    Reagards
    Roobal

  • Error : Profit Center does not match with Business Area. Message no. ZGLTFI

    Hi Everyone,
    Error occurs when doing inbound PGR. Processed done so far are the following:
    Normal PO created & released.
    Inbound created
    Transfer order created and confirmed.
    When doing PGR via VL32N > click Post Goods Receipt error occurs
    Profit Center does not match with Business Area
    Message no. ZGLTFI0001031
    Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
    The same Profit Center was maintained in material master.
    The Plant used was assigned to proper division and business area.
    Any other ways to check?
    Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
    Tried to do other transaction involing the material, plant and profit center all give the same error.
    Any info shared is much appreciated.
    Thank you.

    this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit.  Please find the user exit, or talk to FI Team and ask what they check

  • Cost Center does not exist

    Hi,
    I have called "BAPI_GOODSMVT_CREATE" to have the goods issue, the posting period of MM and FI are opened but the it returned a message Cost center XXX /1101019 does not exist on DD.MM.YYYY .
    Any transaction I need to run for the cost center?

    Hi Chung,
    Check if that Cost center exists. i think CC is 1101019.
    Use txn code ks03 to display the cost center. If its there..then check the validity date for that cost center.
    Hope it will give u some idea.
    Cheers,
    Vikram
    Pls reward for helpful replies!!

  • KP90 error - KI222 - Cost Center does not exist.

    Hi gurus,
    While executing KP90, I got an error message saying "Cost Center xxxxxxx does not exist on 01/01/2011.
    When I checked, the cost center is created from 05/01/2011 to 12/31/2011.
    Please suggest any solutions....
    1) Can I change the message class for KI222
    2) Can I change the from date of cost center.
    Please suggest as this in an High priority!!!!!!!!!!!!!
    Regards,
    Devang

    Hi Devang,
    As you can see, cost center was created some days after the date that the error message is showing.
    You should create for this cost center the missing interval (01.01.2011 to 04.01.2011) and in case you create with the same data the interval will be combined.
    Best Regards,
    Vanessa.

  • I am unable to change my credit card number, because my profile shows United States therefore it does not accept the phone area code, and zip number, because I live in Switzerland. Please inform me how to do it. Many thanks.

    I am unable to change my credit card number because my apple profile shows me as a resident of the United States, although I live in Switzerland. Consequently I cannot edit my area code, zip number, State info, etc. Please advise me how to do it. Many thanks.

    Hello Luis,
    To update your billing information, you would need to change your iTunes Store country to be able to enter the information for Switzerland.  I found an article with the steps to update this:
    Change your iTunes Store country
    Sign in to the account for the iTunes Store region you'd like to use. Tap Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region.
    Follow the onscreen process to change your region, agree to the terms and conditions for the region if necessary, and then change your billing information.
    You can find the full article here:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Thank you for posting in the Apple Support Communities. 
    Best,
    Sheila M.

  • MIGO -Number range for trans./event type WE in year 2012 does not exist

    Hi  to all
    i got one erro while  going do MIGO , error is  
    Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is  WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
    Error Details :
    Number range for trans./event type WE in yar 2012 does not exist
    Message no. M7562
    Diagnosis
    The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
    Procedure
    Contact your system administrator.
    If you are authorized to do so, do you want to check the number ranges for the
    u2022     Material documents
    u2022     Reservations?
    Thanks in Advance
    Rajesh

    Hi Tej,
    Even I am getting the same error
    "number range for trans./event type WE in year 2014 does not exist"
    I have maintained the below number range in tcode OMBT,
    Am I missing anything?? Please help!!

  • Error in VL02N: Business Area 701 does not exist

    Hi experts,
    There's an error that occurs while trying to post a delivery in VL02N, a display log is opened with the message "Business Area X does not exist", the Business Area "1701" is already created, nevertheless, when I try to post the delivery I cheked the Business Area in the Financial Processing tab and it appears as "701" instead of "1701".
    I hope any of you can help me.
    Thanks in advance
    Eloy Venegas

    hi,
    For the Sales Area, check the rule for determining the Bzness Area(S&D>Basic Functions>Account Assgmnt/Costing>Business Area Account Assignment>...) and make sure ur bzness area '1701' is assigned to the sales area/or any combination that you've defined in the rule.
    Let us know, if this helps?
    Reward, if helpful.
    Rgds,
    Raghu.

Maybe you are looking for