G3 Usb Modem Huawei E1550 did not work after unplug (NetworkManager)

Hello, All!
I have the following problem:
When I boot with plugged in usb modem everything is fine.
If I unplug modem and plug it back it can not be used any more.
Some logs below.
1. Modem plugged on boot
lsusb
Bus 001 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
usb_modeswitch log:
USB_ModeSwitch log from Sun Apr 08 23:38:27 CEST 2012
Raw args from udev: /1-1.1:1.0
Using global config file: /etc/usb_modeswitch.conf
Using top device dir /sys/bus/usb/devices/1-1.1
USB values from sysfs:
manufacturer HUAWEI Technology
product HUAWEI Mobile
serial
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /usr/share/usb_modeswitch/12d1:1446
! matched. Reading config data
config: TargetVendor set to 12d1
config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 9 -v 12d1 -p 1446 -f $configBuffer
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.1 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1446
TargetVendor= 0x12d1
TargetProduct= not set
TargetClass= not set
TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/009 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:1446
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -34
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (13 sec.) ...
Waiting for device file system (14 sec.) ...
Waiting for device file system (15 sec.) ...
Reading attributes ...
All attributes matched
Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
Now checking for newly created ports ...
new ports found, device is known to driver
Checking for AVOID_RESET_QUIRK kernel attribute
AVOID_RESET_QUIRK activated
All done, exiting
2.Modem unplugged and plugged back
lsusb
Bus 001 Device 008: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem
usb_modeswitch log:
USB_ModeSwitch log from Sun Apr 08 23:46:12 CEST 2012
Raw args from udev: /1-1.1:1.0
Using global config file: /etc/usb_modeswitch.conf
Using top device dir /sys/bus/usb/devices/1-1.1
USB values from sysfs:
manufacturer HUAWEI Technology
product HUAWEI Mobile
serial
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /usr/share/usb_modeswitch/12d1:1446
! matched. Reading config data
config: TargetVendor set to 12d1
config: TargetProductList set to 1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 7 -v 12d1 -p 1446 -f $configBuffer
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.1 (C) Josua Dietze 2011
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x1446
TargetVendor= 0x12d1
TargetProduct= not set
TargetClass= not set
TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506"
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/007 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:1446
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
Manufacturer: HUAWEI Technology
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
libusb:error [op_clear_halt] clear_halt failed error -1 errno 71
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -34
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (15 sec.) ...
Reading attributes ...
All attributes matched
Mode switching was successful, found 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
Now checking for newly created ports ...
new ports found, device is known to driver
Checking for AVOID_RESET_QUIRK kernel attribute
AVOID_RESET_QUIRK activated
All done, exiting
dmesg output:
[ 261.611314] usb 1-1.1: USB disconnect, device number 3
[ 283.800711] usb 1-1.1: new high-speed USB device number 7 using ehci_hcd
[ 283.899855] scsi11 : usb-storage 1-1.1:1.0
[ 283.900156] scsi12 : usb-storage 1-1.1:1.1
[ 284.638710] usb 1-1.1: USB disconnect, device number 7
[ 300.687875] usb 1-1.1: new high-speed USB device number 8 using ehci_hcd
[ 300.787664] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[ 300.788085] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[ 300.788450] usb 1-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[ 300.789174] scsi16 : usb-storage 1-1.1:1.3
[ 300.790242] scsi17 : usb-storage 1-1.1:1.4
P.S. I am using NetworkManager 0.9.2.0
Any Ideas?
Thanks in advance

Similar Messages

USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

''Ralph Daub [[#answer-694088|said]]''
<blockquote>
Hi Raiyad Raad,
I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
Please ensure that USB Storage and Media Storage are activated.
If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
* What is the model of your phone?
* What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
* Please describe the steps you took to update your device.
* Please provide the exact steps to reproduce the issue you are encountering.
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
- Ralph
</blockquote>
I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
I'm having this problem after updating to firefox OS 2.0

HT201328 Unlocking my iPhone 4s did not work after I did the Restore in my device. Need Help

I received an email confirmation from my carrier that my request to have my iPhone 4s to be unlocked has been sent to Apple and completed, and I followed the instruction given to me for Restoring my device but still not able to use other SIM card. I was advice that I will be able to get the unlock info from Apple when I do the Restore, I'm still getting the error message "SIM card is invalid...." when I replaced the SIM card that came from my carrier with another. Please help. I need to know what am I missing. Appreciate any help.

Yes, I believe the steps did Restore my device as new. I followed the steps given to me in How to Restore software in my device..still I believe the Unlocking did not work because I'm not able to use other SIM card

USB not work after unplug device

I had a satellite m645-s4050, after unplug a usb device, the USB ports from left side stopped working, the right side port still working, this is the second time it hapend to me, the first time i just update de BIOS and everyting work fine again, but now i can not update de bios again because i had the newest version.
Any help??

Satellite M645-S4050
The techniques in this article apply to Windows 7 as well.
USB port may stop working after you remove or insert a USB device
I don't know if the Fix it runs though. If you try it, please let us know.
-Jerry

Certs did not working after failover

we had to failover our primary ace to secondary because primary ace crashed and we had to replace it. After we failied over certain certs stopped working
s
To fix this problem i had to remove the cert from ssl-proxy service and re-add it work. has anybody run into the problem like this? why would this fail after failover to secondary ace?

Oracle-User wrote:
Hi All
We are facing issues on FNDWRR.exe after we failover to DR apps servers. We are not able to retrieve concurrent job logs using web browser. Apache log file shows "Premature end of script headers" error message.
[Sat May 25 19:51:21 2013] [error] [client 10.64.224.134] [ecid: 1369507879:10.166.3.16:3282:0:13,0] Premature end of script headers: /d01/app/ebs/gap/apps_st/comn/webapps/oacore/html/bin/FNDWRR.exe
Any idea what can be causing this issue?
Thanks in advance!Did AutoConfig complete successfully?
Please relink FNDWRR.exe manually or via adadmin and check then.
Thanks,
Hussein

Dirname and basename did not work after linux patch

Friends,
We have a shell script works well before linux (Linux 2.6.32-400.33.2.el5uek x86_64) patch last month.
Based on debug issue in
export PLOC=`dirname $0`
export PDIR=`basename $0`
The testing message as
export PLOC=`dirname $0`
dirname: invalid option -- b
Try `dirname --help' for more information.
How to fix this issue?
Thanks
newdba

The message "invalid option -- 'b'" results from $0 being "-bash". This can be the case if you are source executing the script. This would be a normal behavior.
For instance:
echo "basename \$0" > t1
chmod u+x t1
./t1
t1
. t1
basename: invalid option -- 'b'
Try `basename --help' for more information.

I attempted to perform the itunes update on two different PCs and itunes will no longer open and I received a message to reinstall itunes. The reinstall did not work and I now receive a Runtime error message (R6034) re: library loading incorrectly. Help?

I attempted to perform the itunes update on two different PCs. Itunes will no longer open and prompted me to reinstall itunes. The reinstall did not work after several attempts and I received an error: "Runtime error R6034. An application has made an attempt to load the C Runtime library incorrectly. Please contact the application's support team for more information." Has anyone else had this issue? How can I resolve it?

I've been having the same exact problem this morning, and from the looks of it a lot of other people are posting about this issue, so I don't know if it's maybe something wrong with the download but I'm just relieved that it seems to be that instead of a corruption issue with my windows installation. I'm just wondering how long this will take to be resolved.

Safari not working after reinstall

Hi there,
I had issues with my Safari (it woudn't start after the new upgrade), so I had to reinstall it (had to use AppDelete). The reinstallation worked fine, the program now starts (it used to get stuck at the beginning, with the icon bouncing on the dock and doing nothing), but now the browser doesen't seem to go on the internet anymore. All it does is waiting and timing out. Chrome,Opera and Firefox are working just fine. I am guessing the problem is the new installation, how can I fix this? I'm on the latest version of Lion, latest version of Safari downloaded from the official Apple site.
Thanks in advance

It is not very clear what you did, therefore difficult to recommend something. I understand you upgraded from SL to Lion, and Safari did not work AFTER that upgrade? Strange, does not seem plausible. Or what other upgrade did you do? Safari is a component of the system, and should NEVER be deleted via AppDelete or any other similar app.
As I do not know what you exactly did, I would recommend to download the 10.7.2 combo update (a dmg, around 1 GB), reinstall it as a separate download. After restart, all should be again fine.
How did you reinstall Safari after deleting it with AppDelete? You write ‘The reinstallation worked fine’, could you clarify what you did?

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite.

ZTE Mf190s Internet USB Modem not working after upgrading to Yosemite. any salutation!!

Follow these steps:
go to system preferences.. Open Network..
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
leave account name and password columns blank
Now go to ADVANCED
IN MODEM MENU
VENDOR : GENERIC
MODEL : GPRS / 3G
Press ok
Then CONNECT.. Enjoy.

USB Stick Win XP with View Connector 1.1 did not work why SRS4?

I can see the network drive USBDRV in my Win XP explorer, but it did not work!
The inserted USB Stick (tried 3) LEDs are flashing but not accessible in my VMware View XP VM.
This is what I have configured in the KIOS session of my SRS 4 Server (as VM on ESX 3.5 on Solaris 10u7)
-s viewmanager-server -https -- -m -b -l de_DE -r disk:USBDRVS=$HOME/USBDRVS
Any ideas whats going wrong?

I think that daemon is not a feature supported by Sun Microsystems.
I try it, and works, but once installed, i can't uninstall or disable that daemon, a stay on system installed forever....

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMB/PRAM resetting did not work. Does anyone have some advice or can help?

Keep receiving "USB Over Current Notices" since updating to OSX 10.6.8. I have no devices plugged into my Imac and running everything wireless. SMC/PRAM resetting did not work. Does anyone have some advice or can help?

Hi Melissa,
Pretty strange, but...
Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, does it happen in Safe Mode? Reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

I tried updating software on my iphone and it did not work. My handset has had the picture of the usb cable asking to connect to itunes for hours and i can not switch my phone off or reset it. Please help!

I tried updating iphone software and it did not work. It just shows connect to itunes with usb cable on the handset. I have tried for hours to try and turn the hanset off and troubleshoot but nothing works. The connect to itunes display can not be over-ridden.
Please help!!!

oh and the device is not being recognised by itunes now either.

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

Till my last software update on my MacBook Air I have been able to use my iPhone as a modem via USB. Now it's not working anymore. Other functions via USB are still fine. Any ideas???

The Mac was recently upgraded so it is the Mac, or is it?
Looking for a common denominator: I'l start with wi-fi as the common communication medium.
Known:
A) Broken: iPhone —> wi-fi —> Mac.
B) Broken: iPhone —>USB—> Mac.
C) Broken: iPhone —> Bluetooth —> Mac.
D) Working: Mac —> USB —> other USB devices.
Unknowns:
E) Test Mac —> wi-fi —> a non-iPhone router.
F) Test iPhone —> wi-fi —> another wi-fi device.
Given not A, not B and not C either the Mac or the iPhone could be the culprit.
1) E        | F        : Non sequitur (deepens the mystery).
2) not E | F        : The Mac is the common denominator.
3) E        | not F : The iPhone is the common denominator.
4) not E | not F : All heck broke loose.
For case 1: It would be something on the Mac that prevents it talking to the iPhone through three media even though it can talk to other routers over wi-fi. That would be weird indeed, given the iPhone is talking to other wi-fi devices with no trouble.
For case 2: All of the Mac’s intranet media broken (wi-fi, Bluetooth, and wired-USB) and at least wi-fi works on the iPhone. Something weird is going on in the Mac.
For case 3: The iPhone router function is broken. Upgrade the iOS? Test using another iPhone?
For case 4: Throw everything in the trash and start over.

HT1414 my ipad shut off while using my battery is charged and i did itunes restore did not work what now

itunes restore did not work what do i do now

Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
The copy above was copied from this website.
http://support.apple.com/kb/TS3694#error14

HT1212 I just updated my Ipad 2 to IOS7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. I tried using the OIS7 passcode I use on my Iphone and it did not work and now my Ipad is disabled

I just updated my Ipad 2 to IOS 7, now it is asking me for a passcode. I never set a passcode on my Ipad, so how can I enter a passcode. Earlier today I upgraded my Iphone 5 to IOS 7 and it asked me to set a passcode, which now works fine on my Phone. I tried using the OIS7 passcode I use on my Iphone 5 and it did not work and now my Ipad is disabled. Both devices are on icloud and share the same apple id. The Ipad screen says slide to set up but then there is a prompt for passcode, not for setting up passcode

I called Apple Support and a supervisor helped resolve this for me on my iPad. I suggest calling them for help as this is obviously an issue with the iOS 7 update - she helped me without charge. I could be missing something in my upcoming description, so do not take this as complete - call them.
I had to update iTunes on my Mac Air to the latest version, and I had an iCloud backup from the day I updated to iOS7. Have iTunes open but do NOT connect your iPad yet. Shut down the iPad. Then press/hold the Home key on the iPad while you connect the USB from the iPad to the computer (an image of the USB cable appeared on the iPad). Follow the prompts in iTunes to restore and then backup using iCloud. When the iPad rebooted again to do the backup install, I got the same pass code issue and iTunes would not recognize the iPad without entering a pass code. I disconnected the iPad, turned it off, pressed the Home key while connecting the USB cable. When I did the restore and backup from iCloud the second time, it worked without the pass code issue occurring.

G3 Usb Modem Huawei E1550 did not work after unplug (NetworkManager)

Similar Messages

Maybe you are looking for