Games on different phones, help please

If a Game where to work on all these phones.
3650,6600,7650,7600,3620,3660,6680,
6260,6630,7600,6670,7610,N-Gage,
6680,6681
Would it work on the n91?

I don't think so - N91 is 3rd edition S60 and none of the ones you mentioned are.
Check out
www.nokia.softwaremarket.com
maybe there are games that are compatible for all S60 editions. There you'll also see a lot of stuff for the N91.
All those who believe in psychokinesis raise my hand.

Similar Messages

  • Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

    No sound form :
    - Speaker?
    - Headphones?
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • TS4268 I have just had a new iphone 5c but i can't get imessage or facetime to work on my new phone, help please!

    I have just had a new iphone 5c but i can't get imessage or facetime to work on my new phone, help please!

    what have you done so far to troubleshoot?
    what carrier are you using?   in what country are you?
    Can your phone send & receive a text message?
    Do you have cellular service where you are right now?

  • When I try to sync my I phone 4 to my mac air it won't show up only my iPad not the phone help please

    When I try to sync my iphone to Itunes on my mac air ti will not come up
    My ipad works ok but not the phone help please

    Hello Canonball,
    It sounds like your iPhone is not showing in iTunes so it will not sync, but your iPad works fine. If you have already restarted your phone, (Turn your iOS device off and on (restart) and reset, http://support.apple.com/kb/ht1430), I recommend the troubleshooting from the following article named:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT5622 I have set up my ipad but cant remember the 4 digit code I put in . I cloud does not seem to have any record of me and the ipad mini keeps locking me out as i try different codes - help please

    Help please I have just got my Ipad Mini and set it up but cant remember the code I put in. I cant access settings or anything else as it has locked me out. Ive treid Icloud but it doesnt recognise tht I have registered. Can anyone give me straightforward instructions on how to start again please

    This is the guidance from Apple:
    http://support.apple.com/kb/HT1212
    Barry

  • Andriod phones help please

    This is my 3rd Andriod phone.  I'm looking for one with a good battery, different ring tones for contacts and be able to use a different ring tone for text message alerts.

    Thanks for the information everyone. Yes, depending on what apps you download, how much you use internet, emails, phone calls and other features will depend on how long your battery will last. 
    Additionally, if your looking for an Android devices that can have different ringtones for calls and messaging, we have many different phones that will fit your needs. I have listed a few below to review:
    --Lg-Ally
    --Motorola Droid X
    --HTC Thunderbolt

  • My dress up game is not working HELP PLEASE!!!

    Hi I have created a dress up game for my A2 (last year of college) everything is working perfectly except for two things. I have some idea of how the functions and script work however I just started using flash about a month ago and I have had no solid helo from my teacher which is very annoying.
    1) The first problem is in navigation when I go back to my homepage using the button provided on frames 2 to 6 the button doesnt work again. Basically, on my homepage i click on the womens section and navigate through the different clothing however when i go back to my homepage and click on the womens section again the button doesnt work. In the output section this is the message that shows up:
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at Multimediaproduct_fla::MainTimeline/frame1()
    at flash.display::MovieClip/gotoAndStop()
    at Multimediaproduct_fla::MainTimeline/clickHandler5()
    2)The second problem is that the users are meant to dress up the Mannequin themselves however if i click on tops and dress up the mannequin, then click on trousers the top on the mannequin disappears what should i do? if you need me to show you screenshots please ask but i really really need help because my deadline is this thursday
    THANK YOU,
    Marium.

    This is what my timeline looks like, with the help of different websites I created this game so its very simple and straightforward:
    The code in frame 1 in the script layer is this:
    stop();
    women_btn.addEventListener(MouseEvent.CLICK, clickHandler1);
    function clickHandler1(event:MouseEvent) { gotoAndStop("Women (tops)");}
    The code in frame 2 in the script layer is this:
    stop();
    tops_btn.addEventListener(MouseEvent.CLICK, clickHandler2);
    function clickHandler2(event:MouseEvent) { gotoAndStop("Women (tops)");}
    trousers_btn.addEventListener(MouseEvent.CLICK, clickHandler3);
    function clickHandler3(event:MouseEvent) { gotoAndStop("Trousers");}
    skirts_btn.addEventListener(MouseEvent.CLICK, clickHandler4);
    function clickHandler4(event:MouseEvent) { gotoAndStop("Skirts");}
    homepage_btn.addEventListener(MouseEvent.CLICK, clickHandler5);
    function clickHandler5(event:MouseEvent) { gotoAndStop("Homepage");}
    The code in frame 2 in the pages layer is this:
    stop();
    t1.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t1.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t2.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t2.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t3.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t3.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t4.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t4.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t5.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t5.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t6.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t6.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t7.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t7.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t8.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t8.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t9.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t9.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t10.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t11.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t11.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t12.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t13.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t13.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t14.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t14.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t15.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t15.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t16.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t16.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t17.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t17.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t18.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t18.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t19.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t19.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t20.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t20.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    t20.addEventListener(MouseEvent.MOUSE_DOWN, mouseDoHandler);
    t20.addEventListener(MouseEvent.MOUSE_UP, mouseUHandler);
    function mouseDoHandler(evt:MouseEvent):void {
    var object = evt.target;
    object.startDrag();
    function mouseUHandler(evt:MouseEvent):void {
    var obj = evt.target;
       obj.stopDrag();
    everything is working perfectly as in the drag and drop and everything but I am confused as to how to make the same mannequin stay on all the pages, so that if the user dresses the mannequin with a top they can click on trousers and dress them up with trousers as well.
    Thank you so much sinious for your kind help.

  • J2ME and phones - help please -

    Hi, all. I haven't found much help related to this question, so I'm hoping you all might be able to help me.
    I'm looking into developing for mobile phones. I haven't played with J2ME so much at the moment but I'm on my way. I've got my resources and by the end of this summer I hope to have jumped on that band wagon.
    Here's the scenario: I want to be able to write programs on my PC via the wireless toolkit (I use netbeans). Then I'd like to be able to connect my mobile phone to my PC via USB or Serial cable and upload my programs direct from my PC to my mobile. I'd like to not have to verify the program through BREW or any other online service because AFAIK I have to pay for that. I'm a poor student who's just making enough money to buy a Java enabled cell-phone by the end of this summer.
    Here's the question: What should I look for in a phone?
    My first choice of phone was a Sony Ericsson, I'm assuming it's got direct PC-Mobile transfer enabled. Second was a Nokia. Unfortunately, no carriers around here, at least the ones I'd buy from, carry either of those two phones. I did find an LG 6070. But like I said before, I don't really know what I'm looking for. No-where does the documentation explicitely say anything about direct PC-to-Mobile transfers, and that is what is most important to me.
    Thanks for your help.

    Wow, thanks for the reply.
    As for the target, it would mostly be just for myself at the moment. I am aware that if I were to target a mass market, there are multiple emulators out there I'd have to test my program with. And that I'd have to make minor changes, possibly, for phones with different specs, ala amount of memory a phone has or it's screen size/resolution.
    You got me, I'm into the games thing, but aren't we all? I'm trying to acquire the book "J2ME Game Programming" this summer. So that answers what kind of applications I'm going to write.
    I scoped out a few more phones today and surprisingly, the motorolas actually have some appeal to them.
    That's the sweet part, anyone can write anything and deploy it! I'm assuming from your response that any Java enabled phone should allow PC-Mobile transfer.

  • Pendulum Game Unidentified Error Problem - HELP PLEASE!

    Hi,
    I am trying to create a second level to my pendulum game. The idea is the ball moves left or right using arrow keys, and gets score. timed 1 minute, and if it hits the pendulum it loses. if it survives the first 60 seconds it goes to level 2 with the menacing pendulum, same idea only then the game ends. My go to and play code is not working using the button. Please help this is urgent...Download Link for zip folder with the files: http://www.mayscar.com/DMA205/D4%20-%20TEST.zip
    Thanks!
    Ksenia Zlotin
    Director of Development
    Scar Productions

    Please contact your ISP provided.. Another user of this unit under same company and same router ARRIS experience this issue, while theyre able to connect to other network and router.. Remember if your unit can detect and connect toother network besiide your arris router your issue is with your provider ISP. (Comcast asking the other user to pay $80.00 for activation where I am curious)

  • HT204053 i have more than one id and want to link these so i can transfer my contacts from my icloud to my new phone help please

    i have more than one apple id i want to link these so i can transfer my contacts from old phone to new phone please help

    Welcome to the Apple community.
    You can't link your Apple IDs, all you need to do is use the same ID on all devices and your contacts etc will sync.

  • Lightroom not merging and sorting images from two different cameras - help please !!

    Hi guys,
    I need some help here. I've just imported a few thousands of images form two different cameras, however Lightroom simply sorts them by camera only. (i.e.. images from the first camera, all sorted by capture time, then come images form the second camera.)
    The cameras are the same brand and model, times are synchronised, but the images refuse to merge and sort. I've tried putting them in the same folder and importing, but that doesn't do it either. I've been doing this for years and it all worked fine, till today. Does anyone know whats causing this, and how I can fix it?
    Thanks in anticipation.
    Latch

    Hi John,
    View > Sort > Capture Time is checked, The cameras are in sync down to the second, and images from both have been merging and sorting fine for over two years, till today. Sort order is all set to capture time in all modes and views, but its still sorting first by camera.

  • Compare table structures in different schemas. help please

    Hi all,
    I have a question...
    I have tables on different schemas some thing like
    Schema A
    Table 1
    Table 2
    Table 3
    Schema B
    Table 1
    Table 2
    Table 3
    Now situation is Table 1 and Table 2 will have similar structure or Table 1 in Schema B will have additional columns.
    like so... on... for all other tables...
    example !
    Schema A:
    Desc Table 1;
    Name                                  Type            Null
    No                                Number            Notnull
    Name                           Varchar2(10)     Not null
    Fee                              Number (10,2)   Not null
    Scheam B;
    Desc Table1;
    Name                                  Type               Null
    DX_No                                Number            Notnull
    DX_Name                           Varchar2(10)      Not null
    DX_Fee                              Number (10,2)   Not null
    comments                          Varchar(2)        Now I need to write a procedure sort of thing to compare these tables which are in different in column names in both schema and get it exported to Excel sheet.
    and here thing is first three columns SHOULD BE TREATED AS SAME even though prefix of DX_ exist since REST OF THE PART OF COLUMN NAME IS SAME.
    and in same way commets is new coloumn in schema B only..So that should be highlighted excel sheets..
    I am not sure how OAD or SQL Developer handle this...Is there any plsql block I can write to do above..
    Thanks in advance..

    An example of one method (this is just a starting point, you'll have to build it out to suit your needs).
    create table emp as select * from scott.emp where 1=0;
    alter table emp add (junk number(1));
    select
          t1.column_name as t1_column_name
       ,  t2.column_name as t2_column_name
    from
       select column_name
       from
          dba_tab_columns
       where
          table_name  = 'EMP'
       and
          owner       = user
    ) t1
    full outer join
       select column_name
       from
          dba_tab_columns
       where
          table_name  = 'EMP'
       and
          owner       = 'SCOTT'
    ) t2
    on (t1.column_name = t2.column_name)
    where
       t1.column_name is null
    or
       t2.column_name is null;
    T1_COLUMN_NAME                 T2_COLUMN_NAME
    JUNK
    1 row selected.
    TUBBY_TUBBZ?If you need to remove prefix's ... you would just do that in the select list (using regexp_replace, translate, substr, whatever you think is appropriate for your situation).
    Edited by: Tubby on Nov 6, 2010 12:38 PM
    Forgot to mention that this code will report differences between two schemas, regardless of where the additional columns reside ... if you have a 'master' schema that is the definitive source, then you would want to use the query provided by Xtender.

  • Why cant i activate my phone HELP PLEASE

    why is the activaion server not available

    If setting up as new device without using any backup does not help, you'll have to get it serviced. Setting up as new device is explained here:
    http://support.apple.com/kb/HT4137

  • Stuck on apple logo and Home button doesn't work, help please?

    Well, I dropped my iPod Touch 4g by accident and since that day, the home button hasn't really been working that well. Its very hard to use since you have to press it in really hard to get it to work and sometimes it doesn't even work at all. Anways, I was skyping with my girl and I didn't notice that I had to charge the iPod and it died on me so I was like what ever its normal and started to charge it. When it turned on, it got stuck on the Apple logo and its been there for more than a day now? What can I do? I know about the Press Home + Sleep button together but the Home button doesn't work at all anymore. I tried everything really. I tried to connect it to itunes and see if I could restore it but it won't recognize it no matter where I connect it. Tried it on 3 different computers and none worked at all.  I can't take it to an Apple store since there isn't any close to where I live and I really don't have anyone to take me there. So is there any other solution to fix my problem at home? or is it messed up completely? Someone please help me

    I have this same issue. But also, it isn't just that the lock/home button stops working, all buttons stop working. Even if you switch it to silent sounds are still played. I just got my iphone Thursday. Went to school the next day and pulled it out, it happened while it was locked I guess because my screen was black and I couldn't do anything! Thought it died already! This was around 12. Finally I pulled it out of my pocket again at around 3 and it showed the Apple logo and acted like it had just started back up. Which is what always happens after I get stuck playing a game or something. Help please, has happened two or three times just today.

  • Hi, since my friend has updated to iOS 8 she has lost sight of what is being typed on messages, emails etc. can anyone help, please?

    Not sure if I'm repeating myself here, but here is a repeat:
    HI, my friend has updated her iPad to iOS8 and has since lost sight of anything she types, ie, email, chat in games, etc. can anyone help, please?

    If the keyboard is in the middle of the screen tap the tiny keyboard in the lower right corner of the keyboard then slide your finger up to dock then release finger.

Maybe you are looking for

  • My ipod was stolen what can i do to get it back

    My ipod was stolen out of my backpack and i want to see if i can get it back. What are some ways and how can i get a serial numbber off itunes

  • MSS:  Cannot Start Transaction HRWPC_FC_EXEC

    We have three custom ABAP reports setup for the 'Reports' tab in MSS.  Two of them work fine, but one of them is giving this error message: Cannot Start Transaction The Internet Transaction Server could not start the transaction "HRWPC_FC_EXEC" becau

  • My music has disappeared from my library, how can I get it back?

    The music I have purchased from the itunes store has disappeared from my library, how can I get it back?

  • PDF in qualifier fields ?

    Hi, all I have a PDF lookup field in qualified table as a qualifier. When I select it and click 'View PDF..." system doesn't react and when i click 'Edit externally' or 'Save PDF' I get errors like 'Data Table Not Found, Version SP5 (5.5.42.65)' and

  • Can I maintain original aspect Ratio when making web Quicktime video

    Hello there, I have to convert at 16:9 Premiere file I originally made for DVD into a web ready format. Can I do this without distorting the image? In other words, I want to reduce the file size and keep the proportion intact. Also, for future refere