Geo Maps - Graphics rendering problem

Hi Experts,
I got this error while running an Application with Geo Map.- " Graphics rendering problem"
In my application there are two UI elements ,
Geo Map and Business Graphics, i can see business graphics properly but problem is only with GeoMap.
I checked the SAP Note : 704604.
And the entry in my Visual Admin is : http://localhost :40180
When i go to the URL http://<server>:4<instance>80 , i get the message displayed as "SAP IGS is running"
I am unable to figure out the problem can you guys help?
regards,
Ashish Shah

Hello Ashish,
There must be some problem with IGS server. So check whether your IGS server is configure properly or not.
Follow these steps:
1. Check the path first
Local Drive : \ usr \ SAP \ J2E \ JC01 \ J2EE \ admin
2. Connect to SAP J2EE Engine
3.Open the Visual Administrator Window, In Global Configuration page ,go to
CONFIGURATION ADAPTER -> WEBDYNPRO -> sap.com - > tcwddispwda -> propertysheet.default
4. Switch to edit mode
5.Change property entry , http://<server name: port number>
6.Exit the visual Administrator window
7.Restart J2EE Engine.
Best Regards,
Sheetal.
Edited by: Shital Patil on May 1, 2008 3:11 PM

Similar Messages

Graphics rendering problem in web dynpro

Hi all,
I have a problem using BusinessGraphics in my web dynpro application. I got the "Graphics Rendering Problem". Reading some foruns, Ive read in some thread that I have to have 5 files under my igs/conf folder of SAP installation, but I have only 2 (gwfchart.tpl and xmlchart.tpl).
One proposed solution is to apply one patch to my igs server.
My question is....
- How do I dowload the patches ? From where ? I couldnt find a download link.
Thanks in advance,

Hi,
the corresponding note for the IgsUrl paramter mentioned by Rich is <a href="http://service.sap.com/sap/support/notes/704604">704604</a>.
I think you should check this first before you upgrade your IGS installation. Note <a href="http://service.sap.com/sap/support/notes/931900">931900</a> shows you how to find out the IGS patchlevel. Then you see if your IGS is running (correct) and maybe an upgrade is needed also.
Regards
Matthias

Business Graphics Tutorial: graphics rendering problem

Hello,
I did the tutorial "business graphics". Deploying the project I get the error: graphics rendering problem
Is there anything first to set up, I forgot?
Thank You, Regards Mario

Hi Mario,
Go to this link .It contains steps for installing igs
http://help.sap.com/saphelp_nw04/helpdata/en/4b/72d43ac66e1f08e10000000a114084/frameset.htm
After installing igs see whether you can see it on the services in mmc
Hive the listener port as 8030
After the installation go to the default page as given below
http://<server name>:8030
If the igs service is running you will get a default page
After that go to this link and do the sample application
Regards
Rohit

IGS Graphics Rendering Problem

Hi experts,
I have the following problem with the igs:
I have 2 applications with business graphics technicaly the same.
Both worked fine with the same igsURL, but lately one of them is showing "Graphics Rendering Problem"
Can You tell me please where else can be the problem? The SAP IGS is running, and the URL is the same for both of my apps, obvious the problem is in the app but Idon`t have an idea where to look
Thanks in advance
Z.

Hi,
This problem can also be caused when proper values for
Series and category are not bound..
Make sure you filled the dataNode with values..
Regards
LN

Portal error message "Graphic rendering problem"

We just built a new portal system on Window server. A user login and get this error message "Graphic rendering problem". Would someone know what it is ? Thanks !

Check that the IGS is running properly...
Also check SAP Note: 704604
Regards
Juan

Business Graphic rendering problem.

Im running J2ee (NW2004) SP20.
Ive been following this simple business graphics tutorial (http://help.sap.com/saphelp_nw04/helpdata/en/e5/08b6eb35637a44830b9e6df22987aa/content.htm) and get a generic image not found red x with I try and render my simple graph.
I have verified my IGS is setup correctly (Visual Admin) and have it referenced within my little app. When I execute my app I get the red x if I look at the IGS admin I can see a call for XMLCHART and that data was transferred. I dont see any errors in the log files. If I look at the source code I see the following url in the image source.
../../sap.com/test/Test/~wd_key17_1202141238651/unknown.gif
Does anyone have an idea?
Thanks in advance.
/Greg

Rao -
In my case it was a matter of accessing my server with the fully qualified url. Initially I was accessing my site using http://hostname:port/.../application and was receiving the error. When I started using the fully qualified url http://hostname.domain.com:port/.../application the application started working.
I hope your problem is that simple to resolve. Good luck.
/Greg

Graphics rendering problem in Netweaver WAS 7.0

Hi Experts,
Actually we have installed Netweaver WAS 7.0 with SP 18 and trying to configure the IGS for graphs in webdynpro java application i tryied with all the ports starting with 40080 and all other ports starting with 400..... Could any one help in configuring the IGS differently so that i can render the graphs in webdynpro application.
I know how to configure it in Visual Admin but i tried it no luck do i need to do any tweaks in such a way it turns the magic on.
Pllease advice.
Thanks,
Kelli.

Hi Kelli,
According to [this|http://help.sap.com/saphelp_nwpi711/helpdata/en/69/a6d43ac66e1f08e10000000a114084/frameset.htm] page, IGS port number would be 4$(SAPSYSTEM)80 so try that and check.

Business Graphics Rendering Issue

Hi Experts,
I am trying to use Business Graphics in my Web Dynpro application. However, I am getting following message:
Graphics Rendering Problem.
I looked into following Blog:
/people/sap.user72/blog/2005/03/23/business-graphics-in-webdynpro
As per the blog, we have to look <MUX> tag in the igs.xml. Tyhe xml should be located in \usr\sap\NTH\JC00\igs\conf\igs.xml. First of all, I can not find any path as mentioned in blog. I can not find path "\usr\sap\NTH\JC00\igs\conf".
I have found one igs.xml in server and is located at \usr\sap\somename\somename\j2ee\JSPM\config\igs.xml.
This XML is pasted below:
<?xml version="1.0" ?>
<!DOCTYPE kernelPatches (View Source for full doctype...)>
- <kernelPatches name="BC-FES-IGS" vendor="sap.com" sequenceFile="IgsTasksSequence.xml" sequence="process">
- <os code="*">
- <cmdVersion extractor="SAPCAR" archiveId="IGS" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR" opCode="C" required="N" dir="igs" />
</os>
- <os code="WIN">
- <cmdVersion extractor="SAPCAR.EXE" archiveId="IGS_WIN" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_WIN" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR.EXE" opCode="C" required="N" dir="igs" />
</os>
- <os code="OS4">
- <cmdVersion extractor="SAPCAR" archiveId="IGS_OS4" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_OS4" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR" opCode="C" required="N" dir="igs" />
</os>
</kernelPatches>
Above XML does not contain any <MUX> tag.
My questions are -
1) How to find out whether IGS server is installed or not in my env?
2) Why we can't see <MUX> tag in above XML?
Please help me in resolving the issue.
Regards,
Brian

Hi Brian,
I guess your IGS version is 7.00. the file igs.xml only exists in IGS 6.40. The IGS configuration is in the instance profile with IGS 7.00. When your instance number is 00 the default HTTP listener port of the IGS is 40080.
Refer to note <a href="http://service.sap.com/sap/support/notes/704604">704604</a> to see how the IgsUrl is maintained. Please check if the value is correct and also try out localhost instead of the hostname.
Best regards
Matthias

Geo MAP in Web dynpro Application

Hi all,
we are trying to test the GeoMap Functionality in SAP Help we found that some Software Component is required to run the Geo Map Web Dynpro Application as given below
"The GeoMap UI element can only be used with a special software component that is provided by the geographical maps.
This software component which you can use to expand the Internet Graphics Service (IGS) is not included in the delivered SAP Web Application Server package. It must be purchased from a third-party provider. The GeoMap UI element cannot be displayed without this complementary software component. "
can u help me with some pointers to these third party providers.
Regards
Sai Krishna Reddy

Hi Sai,
you can see the following tutorial
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/webdynpro/tutorial on using geo services with web dynpro - 22.htm
for GeoService information you can visit the following sites
1. http://www.geomap.com/
2. http://www.nacgeo.com/geoservices.asp
Regards,
Shubhadip

Rendering problems in AE CC.

Hello,
Problem description:
I'm having rendering problems in AE CC. During the render process of the video material, which occurs in random parts of the file, the computer just keep restarting itself. There is no blue screen or any error log in windows event viewer. I’ve tried rendering my project multiple times with different settings (changing multiprocess settings, RAM allocation or moving temp/source files to another disk) but I’m still coming up with this problem.
I have installed and run any kind of benchmark software and put PC under heavy stress-test for couple of hours to make sure there isn’t any hardware- or temperature-related problem. I also have a second Dell Precision T3610 workstation with the same specs, and exactly the same problem occurs. Another thing is, that on different computer with some random specs, I’ve tried to render the same project and there is no problem at all – so my project seems to be fine.
Used machine:
Dell Precision T3610
- Windows 7 sp1 x64
- Xeon CPU E5-1620 3,70GHz
- Samsung SSD 840 EVO ver 6.1.7600.16385
- 16gb Dell DDR3 Quad-1866 MHz
- Quadro K2000
version Adobe:
-adobe after effect 2014.2 version 13.2.0.49
-creative cloud 1.9.0.465
System drivers:
- all updates on windows to 03.2015
- graphics card nvidia 347.52
Please, let me know if You need more information.
Best regards,
Adam Zielke

So, any comp with that footage crashes AE, but comps without are fine?
Try transcoding that footage with the Adobe Media Encoder into a production codec (for example, QuickTime with the Photo-JPEG codec or, for truly lossless, QuickTime with the PNG codec).
See if that project will work. That'll help us figure out if it's reading the CR2 files that is causing the problem or the EXR writing that's the issue.
If it turns out the CR2 files are causing the issue (because AE works with the intermediate files or the Adobe Media Encoder won't even work with them), file a bug report and let Adobe know that you're willing to include a sample video file so they can test with it. Adobe - Feature Request/Bug Report Form

Weird rendering problems?

Hello
I recently stopped making videos to have a break, but now I'm back...but Im encountering strange rendering problem.
I am using Adobe Premiere Pro CC, my PC specs are
Intel core i5 2.8GHz
4GBs RAM
GeForce GTX 760 (Asus OC version)
64 bit Windows 8.1
Now to the problem. I render the video normally, everything normal. But when I play the video back, the audio is in sync at the beginning, then starts to slowly unsync itself as the video progresses.
But it doesn't stop there. The video randomly speeds ahead, and then jumps back about 5 seconds. The video continues for about 30 seconds, speeding up, then skips back again.
I've tried exporting the video & audio separately, but to no avail.
I've tried multiple file formats and bitrates and sizes, same problem.
It should be noted that the video plays fine in the program, just after it's exported, things go bad.
I know this may be hard to fix, but any help appreciated.
If you need any more info, just ask.
Thank you.
Edit: it should be noted that I changed my graphics card recently, that may or may not be the cause.

HMm... My video is 30fps but at the end Theres a bit of an Easter egg where an images flashes rapidly, possibly in between frames, could this be the cause?
thanks for your help, though I won't be able to get on my computer for about 15 hours now, I'll keep you updated via my phone.

XRPM missing ivew and rendering problem

Hi, guys:
I am working with a RKT 2008 system and facing some XRPM issues. Would any of you be so kind to give me some comments or hints if you got?
Iview 'task' is missing.
Rendering problem happens whereever a chart or graphic is supposed to be created.
Thanks very much in advance and kind regards,
Robert

I see you followed Jerry's advice to post over here, and haven't got any responces, so I'll at least try to get a little more information into the discussion.
Since the document prints to pdf correctly, but not to the actual printer, it seems likely that it is a print driver issue. In the Numbers discussion on the issue, the original person with the issue was using a HP printer with a postscript driver. Since the HP support site was not very clear about whether a driver for that printer on Mavericks even existed, and the recommendation for a generic driver was for a PCL driver, not postscript, I suspect that they were not using a recommended configuration. It would probably be helpful to know the details about your printer and print driver.
Do you have access to more than one printer to test this on?
The new versions of Numbers and Pages are doing something strange in terms of how they copy tables to the system clipboard; the pdf version is no longer available, only bitmap images. Print to pdf, however seems to still get the pdf data. I don't think this should have anything to do with the data getting to the print driver, but it does seem consistent with your results.

Rendering Problem in PDA

Hello Experts,
I am creating an OCA application, in which i have having a table in the View , which is bound to the view context node.
This view context node is inturn mapped with the component context node. I am creating a new context element for this node at runtime. After creation of this element, it is getting reflected in the Table present in View. But the problem arising is, in the table, 2 of the columns are input fields and rest all are text views. The input fields have some value by default on load of view.
When i create a new context element at runtime, the data for these two input fields are not getting refreshed. if suppose there are 3 rows in the table, then for both the input fields, the same data as the first row is repeating in all rows.
If i bind these two context elements to a text view type of column, the correct data is coming.
I have checked the view context, it has the correct data. It is a rendering problem which I am facing.
Please help!!
Regards
Priya

Hi Priya
After creating context elements, can you please try this code
wdContext.node<Node>().reload();
Regards
Vidyadhar

Geo-Map doesn't work

Hi experts,
I wanted to include a map showing sales per country.
I'm using 0country as a static geo characteristic.
Although having read help some times, not success could be achieved.
According to help.sap.com I want to tell, what goes wrong:
The first thing is, that I can't "download geo-characteristics (all)".
Why? Is this correct? Or is this caused if no relevant attributes are given? Do I need them? Because it seems that i can't change it.
Okay, ArcView caused some more trouble. But answering this first questions maybe brings solution.
Thanks for answering
Martin

It has taken me some time to realise that my GeoMap works!
<u>The thing is:</u>
<b>It only works in 3.5!!!</b>
There, everything is all right.
But BW70 doesn't show anything!!!
I've read help that this could be caused by several reasons:
old service pack (older than SP10) : Can't be. We're on SP12.
No Data / No Geo characteristic: Not the problem. Same query works in 3.5.
Does anyone have an idea, please?

Rendering problem in output of Pages 5.1

Has anyone else seen a print rendering problem when trying to print a table in Pages 5.1?
All my text in tables is jagged and lower-resolution than other text:
(Printed from Pages 5.1 (1769) on a HP Color LaserJet CP2025 from a retina MacBook Pro original model running Mavericks 10.9.1.)
To see the problem, you must look at the full size image. Right-click to open it in a new tab.
The type is set to Helvetica 12 pt black.
The borders are set to 0.5 pt black. The top two lines have a border on all sides.
The top line's border is nearly invisible; on the full size image you should see a faint blueish line.
The middle line's box box is supposed to be  a full box, but it is missing two sides. But at least this hairline renders properly.
The pdf of the same file looks fine on screen, even at high magnification. The problem only shows up in print.
The same problem exists in Numbers (where I first experienced it):
https://discussions.apple.com/message/24695801#24695801

I see you followed Jerry's advice to post over here, and haven't got any responces, so I'll at least try to get a little more information into the discussion.
Since the document prints to pdf correctly, but not to the actual printer, it seems likely that it is a print driver issue. In the Numbers discussion on the issue, the original person with the issue was using a HP printer with a postscript driver. Since the HP support site was not very clear about whether a driver for that printer on Mavericks even existed, and the recommendation for a generic driver was for a PCL driver, not postscript, I suspect that they were not using a recommended configuration. It would probably be helpful to know the details about your printer and print driver.
Do you have access to more than one printer to test this on?
The new versions of Numbers and Pages are doing something strange in terms of how they copy tables to the system clipboard; the pdf version is no longer available, only bitmap images. Print to pdf, however seems to still get the pdf data. I don't think this should have anything to do with the data getting to the print driver, but it does seem consistent with your results.

Geo Maps - Graphics rendering problem

Similar Messages

Maybe you are looking for