Get an odd error message submitting half-day vacations

Hi,
I've written a web interface tool (php+saprfc) where employees can request vacation dates. Once the request is committed, the entry is forwarded to SAP.
I use the BAPI_PTMGRATTABS_MNGCREATION which has the following Input fields:
ABS_ATT_TYPE
EMPLOYEENUMBER
SIMULATE
HRABSATT_IN which contains
FROM_DATE, TO_DATE, START_TIME, END_TIME, ABS_ATT_HOURS, ALL_DAY_FLAG and PREVIOUS_DAY
My functions is working properly for whole day vacations, in this case only ABS_ATT_TYPE is set to '0100', FROM_DATE and TO_DATE to the accordings dates all other vars remain empty.
But now I try to implement the half-day vacations. I set the following values:
ABS_ATT_TYPE = '0110'
FROM_DATE and TO_DATE have the same date value
START_TIME = '080000'
END_TIME = ''
ABS_ATT_HOURS = '4,13'  (germany decimal separator)
ALL_DAY_FLAG = ''  (here, I'm not sure if this should be a 'X' or something)
Now I get the following error message (I've no idea how to translate this german error message, I hope someone else can provide this?)
E 12 Für An-/Abwesenheitsart 0110 sind nur untertägige Sätze erlaubt
Could be something like: 'For absence type 0110 only subsurface records allowed' ??
I really appreciate any ideas.

I doubt myself that 'subsurface' is the correct translation of 'untertäig'
But your were absolutely right with your idea of the 'wrong' starting time.
Just tried '090000' and now it works. Things can be soo easy )
I left the END-TIME empty assuming the value would be calculated automatically. But the entry in SAP shows 09:00 - to 17:00 0,88% of a day. I guessed passing the ABS_ATT_HOURS value would be enough.
I'm going to play with the parameters to figure out which are neccessary in which case.
Thanks for bringing me back on the right path.

Similar Messages

  • Ipod not recognized, getting odd error message

    I've seen this posted a few times, but without any hints as to how to fix the problem.
    I have a 4G 20GB iPod, just over a year old (meaning, no warranty), that has worked fine until this morning. I turned it on, and all of a sudden, it kept skipping through all of my songs, and wouldn't respond to the pause, play, etc. buttons.
    I attached it to my computer via FireWire, and I keep getting this odd error message: "You have inserted a device that has no volumes that OSX can recognize" It asks me if I want to ignore, initialize, or eject the disc. I've been having it ignore it, or eject it (staying far away from initialization). After I ejected it, I noticed that all the songs on my iPod are now missing.
    I reset the iPod, which didn't do much, and now I can't restore it, because neither the computer or iTunes recognizes my iPod. It shows up in Disk Utility, but I'm not entirely sure how to proceed.
    What happened to my iPod? I can't seem to find anything in the Apple support pages that seems similar to my situation. Any suggestions on how to get the thing to work again?
    Edit: I am using iTunes version 4.9; I have not updated to 5.0

    This is the most frustrating tech trouble!
    The same thing has happened to my iPod. It worked fine, then one day I plug it in and it says "Disc inserted is unreadable by this computer". As far as I remember, I didnt' update anything, make any changes, or adjust any settings to any of my hardware. SO WHAT HAPPENED?? And now I can't restore or doctor the iPod hardware bc my computer won't recognize it as actual hardware...
    pleeeeease help, if anyone has a way to fix this.
    The weirdest part, is that when I look at the information of the "unreadable hardware" it describes it with all the information, like how many gigs are available, how much space is used up, latest updates etc. So it can transfer information, but it pretends its unreadable? i dont understand.

  • N95 - odd error message

    I have an N95 with Ver 20.0.015, and in the last day or so I have been getting an odd error message on start up - can someone suggest what is going on?
    Very soon after turning on, the system says Installing... and then a message come up saying 'Untrusted software found on memory. To install, go to Application Manager'
    I have looked at Appl Mgr, and there is an entry 'e14a45b8.sis' that says Not Installed, which is, I suspect, the guilty party.
    Is this likely to be the problem, and does anyone know why I should not Remove this?

    Hi jcaswell
    v20.0.015 seems more intolerant of older applications than previous versions. In my case there was an eight numeral .sis on my memory card which was "Not installed" and produced this message at every start-up. Fortunately 'Googling" established that this was early Nokia "Podcasting" application which as it is now part of the firmware, could safely be deleted; now I no longer get this message on start-up. In Application Manager if you click on this application > options, you should be able to get more information about it's identity.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Odd error message when attempting installation of iTunes 8

    When I try to install the iTunes 8 (the most recent version), I get an odd error message and am unable to successfully complete the installation. This is the message:
    Could not access network location
    %USERPROFILE%\Start Menu\Programs\Startup\
    This message is then followed by Retry or Cancel; Retry has not worked at all with the same error message popping up. There is no error number that I can see. After I finally hit cancel out of frustration, this message shows up:
    The installation of QuickTime did not complete successfully. iTunes requires QuickTime.
    I think that the first message occurs during the program's attempt to do QuickTime before the iTunes. I tried downloading and upgrading QuickTime separately, but that was also unsuccessful. I do now have an earlier version of QuickTime on my computer, but that is only because I recently added some software (Rosetta Stone to be exact) that requires the 5.0 version and downloads it automatically. I also have tried the troubleshooting tips on the Apple site.
    My computer is a Dell, with Windows XP Home Edition. I do have the second Service Pack from Microsoft, and should have all of the latest updates. Please help! I'm getting really frustrated with my computer and have no idea on what to do next.

    When you get a message about not being able to access a network location you usually need the Microsoft installer cleanup utility.
    Here is a method:
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
    http://support.microsoft.com/kb/290301/
    (To run the program – All Programs>>Windows Install)
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.

  • Odd error message

    I am getting an odd error message with iTunes:
    +The iTunes library file cannot be saved. You do not have enough access privileges for this operation.+
    Any ideas why I am getting this message. My iPod never had problems before, and I am the only one who uses the computer.
    Any help would be greatly appreciated.

    I too have seen this error message now and again. (Right now as a matter of fact).
    Doesn't appear to have any adverse affects on my music library but with over 8,000 songs I may never notice the problems.
    Concerned...

  • I get the following error message day in and day out, what does it mean -- what can I do to make it go away? The server responded: "403" to operation CalDAVWriteEntityQueueableOperation.

    I get the following error message day in and day out, what does it mean -- what can I do to make it go away? "The server responded: “403” to operation CalDAVWriteEntityQueueableOperation."

    Now it keeps saying that it is restored but there is still no music or video on it. And a new error is coming up that says "We could not complete your iTunes store request.The iTunes Store is temporarily unavailable. Please try again later."

  • Recieving an odd error message...

    For the past few days, i have been running into an odd error message whenever i try to update my iPod through iTunes.
    The message is "Attempting to copy to disk "Harout's(my name) IP failed. The disk could not be read from or written too."
    This always happens during the update for my iPod. It gets to about 10% updated then pulls this message out. I've tried uninstalling iTunes and reinstalling it, with the newest version, got the newest iPod updater, and even restored my iPod and tried it again and nothing has helped.
    Do you guys have any idea on what i can do?

    http://docs.info.apple.com/article.html?artnum=301267

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

    after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
    Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
    The SIM works on a different phone I tested it.
    Any ideas?? TKS Sandro

    “Could Not Activate EDGE” error message Update ...
    Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
    After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
    AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
    When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
    I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
    By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
    Thanks
    Joe

  • When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

    When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
    When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
    When I click "Agree",  It is disabled.
    Can anyone tell me why this has happened and how to resolve it?
    Please, please, please help.

    Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
    This Apple ID has not yet been used with iTunes.
    I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
    Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
    Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

  • I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

    I am trying to order a book with iphoto, I keep getting the same error message.
    " A network error occurred while processing your order, please check your network connection and try again"
    I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
    I have ordered two books a few months ago without any problems.
    Now I keep getting the same message either half way into
    the order or at the final hurdle after the images have been uploaded.
    Any ideas?
    My shared Network has been fine and that does'nt seem an issue.
    Help.

    Try again in a couple of hours - sometimes it is a temp condition
    LN

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • Odd error message - Can't save new Pages docs

    I use Pages a lot and know it pretty well. But today I got an odd error message I have never seen. It is stopping me from using Pages.
    Today, when I attempted to create a new Pages document and save it to a folder in my Documents folder (or to my Desktop), I get an instant error message saying, "The file ‘FileName.pages' doesn’t exist." (see below).  In effect, Pages will not allow me to save a new file. I can open older Pages files, edit them and save them.  I just cannot create a new file and save it. I have restarted Pages and my computer multiple times with no effect on this message.
    Anyone dealt with this before?

    There you are, Pages 5 can be relied on to not be relied on.
    Not much comfort for your previous file though.
    Steve Martin in The Jerk, when he sets off on his great adventure, is taught some essential life skills by his black family:
    1.    Lord loves a working man.
    2.    Don't trust Whitey.
    3.    If you catch it, see a doctor and get rid of it.
    Were he to head off today with a Macbook Air under his arm we'd have to warn him about Pages 5 as well.
    Peter

  • My HP LaserJet 100 color MFP M175nw is getting a 52 error message

    My HP LaserJet 100 color MFP M175nw is getting a 52 error message, how i can fix it ?

    Hi @pipou716 ,
    I'd like to help you resolve the 52 error message today.
    Does the error also have the word scanner in it?
    I would do a hard reset to see if that will resolve the issue.
    Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
    Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
    This ensures the printer is receiving full power and may help this situation.
    Update the printer's firmware. Software & Drivers.
    Restart the printer after the firmware is updated.
    How is the printer connected? (USB/Ethernet/Wireless)
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for