Get cluster disk name passing Disk ID
Hi experts,
can you share me powershell command to get cluster disk name like "Cluster Disk 2" on passing argument as "D" where D: is drive ID.
sid
That is not readily available, particularly when you consider that D: might not even be available to the cluster node from which you are executing the command.
Could you provide more information about what you are trying to do instead of how you are trying to do it?
. : | : . : | : . tim
Similar Messages
-
How to get information about cluster disk using powershell
Hi
How can I list all cluster disks in my Hyper-V cluster using Powershell? I see two cluster disk "Cluster Disk 1" and "Cluster Disk 1" in my cluster management console but I would like to see them using powershell.
Kind Regards Tomaszhttp://tinyurl.com/mfro3q5
Get-ClusterResource
Get-ClusterQuorum
Get-ClusterSharedVolume
. : | : . : | : . tim -
Hi Everyone
I have built a Windows 2008 R2 Failover Cluster. It is scheduled to be a HyperV cluster, but I have removed HyperV from the equation as I am having problems.
Its a 2 node cluster connecting to a PS4000 via iscsi.
Network config is
Nic 1 - Host and Cluster Management - 10.160.19.x/24
Nic 2 & 3 - icsci 10.160.46..x/24, MPIO,
Nic 4 - CSV - 10.160.47/24
Nic 5 - LiveMigration - 10.160.49.x/24
Nic6 - VMSwitch - HyperV Virtual Machine "External" nic.
The cluster ip is on 10.160.19.x.
The Cluster validation passes sucessfully and so does creating the cluster and performing post creating validations. When I simulate failures of the Quorum disk, it fails over to the second node after requisites retrys on the first node...all good.
However when I simulate failures on the second cluster disk, it just fails on the primary node. I can bring it online on same node or if I stop the cluster service on that node, everything successfully fails over to the second node. But automatic/simulating
failover isn't working.
When I dump out the cluster log(below)this is all the entries pertaining to the failover attempt. Sorry for the log dump.
My analysis of the log, leads me in two directions, Is my nic assignment and config correct? Can I confirm the Cluster disk guids are identical between nodes?
I appreciate any assistance. Apologies on the large log.
Thanks
[NM] Received request from client address 10.160.19.22.
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:32.005 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.005 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.005 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000f50::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.317 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.317 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.317 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:32.332 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:32.332 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000005e0::2011/01/13-16:10:32.332 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(1) result 0.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:35.296 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] resource VM1: failure count: 1, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] Will restart resource in 500 milliseconds.
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to DelayRestartingResource].
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:35.296 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to DelayRestartingResource]-->[Terminating to DelayRestartingResource].
00000bd4.00000eb0::2011/01/13-16:10:35.296 INFO [RES] Physical Disk <VM1>: Terminate request.
00000bd4.00000eb0::2011/01/13-16:10:35.327 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000bd4.00000eb0::2011/01/13-16:10:35.343 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.343 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.343 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.343 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.359 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.359 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.359 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.437 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.437 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.437 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:35.452 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:35.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:35.452 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:36.263 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d30::2011/01/13-16:10:36.279 INFO [RCM] TransitionToState(VM1) [Terminating to DelayRestartingResource]-->DelayRestartingResource.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] Delay-restarting VM1 and any waiting dependents.
00000730.00000d3c::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) DelayRestartingResource-->OnlineCallIssued.
00000bd4.00000eb0::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Online request.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 997.
00000730.00000298::2011/01/13-16:10:36.794 INFO [RCM] TransitionToState(VM1) OnlineCallIssued-->OnlinePending.
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk <VM1>: Arbitrate request: FastPath 0
00000bd4.00000c04::2011/01/13-16:10:36.794 INFO [RES] Physical Disk: Enter EnumerateDevices: EnumDevice 0
00000bd4.00000c04::2011/01/13-16:10:36.809 INFO [RES] Physical Disk: Exit EnumerateDevices: status 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Successful reserve, disk is unowned, key 4daf7466734d
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk: Update disk props returns 0
00000bd4.00000c04::2011/01/13-16:10:36.841 INFO [RES] Physical Disk <VM1>: Disk is offline
00000730.00000298::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing RequestLock 1:42
00000730.00000314::2011/01/13-16:10:36.841 INFO [GUM] Node 1: Processing GrantLock to 1 (sent by 2 gumid: 566)
00000bd4.00000c04::2011/01/13-16:10:36.841 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to get volume guid for device
\\?\GLOBALROOT\Device\Harddisk3\Partition1\. Error 3
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Adding volume
\\?\STORAGE#Volume#{73432ff7-18ee-11e0-aded-0026b93b46a0}#0000000000100000#{53f5630d-b6bf-11d0-94f2-00a0c91efb8b}
00000bd4.00000f30::2011/01/13-16:10:36.856 INFO [RES] Physical Disk <VM1>: Completed HardDiskpUpdateRegistryWorker (start time 16:10:36.841)
00000bd4.00000bf8::2011/01/13-16:10:36.856 INFO [RES] Physical Disk: PNP: Add Volume exit, status 0
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.856 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.856 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:36.856 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d3c::2011/01/13-16:10:36.872 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:36.872 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000298::2011/01/13-16:10:36.872 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [RES] Physical Disk <VM1>: OnlineThread: Failed to set volguid \??\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}. Error: 183.
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: Found 2 mount points for device \Device\Harddisk3\Partition1
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk <VM1>: VolumeIsNtfs: Volume
\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: Volume
\\?\GLOBALROOT\Device\Harddisk3\Partition1\ has FS type NTFS
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: MountPoint V:\ points to volume
\\?\Volume{7343300a-18ee-11e0-aded-0026b93b46a0}\
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 WARN [ClRtl] SsCoreShareAdd(): status = 2118 share = V$ server = (null)
00000bd4.00000c04::2011/01/13-16:10:40.850 DBG [ClRtl] CaptureShareInfo: Share 0000000000000050, Server 0000000000000000, Path 0000000000000056 SD 0000000000000000 size 242
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RHS] Resource VM1 has come online. RHS is about to report status change to RCM
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] HandleMonitorReply: ONLINERESOURCE for 'VM1', gen(2) result 0.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] TransitionToState(VM1) OnlinePending-->Online.
00000730.00000d3c::2011/01/13-16:10:40.850 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Online)
00000bd4.00000c04::2011/01/13-16:10:40.850 INFO [RES] Physical Disk: DriveLetter mask: 0x200000
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.896 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.896 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.896 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.912 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.912 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.912 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.928 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.928 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.928 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:40.943 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:40.943 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.000006d8::2011/01/13-16:10:40.943 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d30::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmApi::FailResource: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] HandleMonitorReply: FAILURENOTIFICATION for 'VM1', gen(3) result 0.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) Online-->ProcessingFailure.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Online --> Failed)
00000730.00000d40::2011/01/13-16:10:47.354 ERR [RCM] rcm::RcmResource::HandleFailure: (VM1)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] resource VM1: failure count: 2, restartAction: 2.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) ProcessingFailure-->[WaitingToTerminate to Failed].
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Failed --> Pending)
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] TransitionToState(VM1) [WaitingToTerminate to Failed]-->[Terminating to Failed].
00000bd4.00000eb0::2011/01/13-16:10:47.354 INFO [RES] Physical Disk <VM1>: Terminate request.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] Resource VM1 is causing group Available Storage to failover. Posting worker thread.
00000730.00000d40::2011/01/13-16:10:47.354 INFO [RCM] rcm::RcmGroup::Failover: (Available Storage)
00000bd4.00000eb0::2011/01/13-16:10:47.417 WARN [RES] Physical Disk <VM1>: Terminate: Failed to offline volume \Device\Harddisk3\Partition1, Error 5
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.432 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.0000076c::2011/01/13-16:10:47.432 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.0000076c::2011/01/13-16:10:47.448 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:47.448 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d30::2011/01/13-16:10:47.448 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000bd4.00000eb0::2011/01/13-16:10:47.666 INFO [RES] Physical Disk <VM1>: HardDiskpCloseSVIHandles: Exit
00000bd4.00000eb0::2011/01/13-16:10:48.259 INFO [RES] Physical Disk: ReleaseDisk: stop reserve succeeded on device 3 (sig 44423655)
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] HandleMonitorReply: TERMINATERESOURCE for 'VM1', gen(4) result 0.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] TransitionToState(VM1) [Terminating to Failed]-->Failed.
00000730.0000076c::2011/01/13-16:10:48.368 INFO [RCM] rcm::RcmGroup::UpdateStateIfChanged: (Available Storage, Pending --> Failed)
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Not failing over group Available Storage, failoverCount 1, failover threshold 0, nodeAvailCount 0.
00000730.00000d40::2011/01/13-16:10:48.384 INFO [RCM] Will retry online of VM1 in 3600000 milliseconds.
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.384 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.384 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.384 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQ's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000730.00000d40::2011/01/13-16:10:48.400 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node. Attempting to find a good node...
00000b18.00000c1c::2011/01/13-16:10:48.400 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000730.0000076c::2011/01/13-16:10:48.400 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.Thanks Ramzan and Elden for your reply. :) :)
Issue Faced:
we have 3 cluster server(2008 enterprise R2). The cluster server gets rebooted and failover happens frequently.As a workaround,we use to unistall Network threat component(symantec) when the issue happens.
The Cluster validation passes sucessfully for both storage and network.
I dont find any logs apart from the below.
00000d38.00000698::2011/04/15-20:04:38.452 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQ returned 21.'
00000984.00000d88::2011/04/15-20:04:38.452 WARN [RCM] Failed to load restype 'MSMQ': error 21.
00000d38.00000698::2011/04/15-20:04:38.467 ERR [RHS] s_RhsRpcCreateResType: ERROR_NOT_READY(21)' because of 'Startup routine for ResType MSMQTriggers returned 21.'
00000984.000012f0::2011/04/15-20:04:38.467 WARN [RCM] Failed to load restype 'MSMQTriggers': error 21.
00000984.000012f0::2011/04/15-20:04:38.467 WARN [RCM] rcm::RcmApi::ResTypeControl: ResType MSMQTriggers's DLL is not present on this node.
Attempting to find a good node...
We collected the bugcheck analysis report after the reboot. The report as follows
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 0
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!FillSessionInfoBuffer+a2
fffff880`05472ed2 448b9c2480000000 mov r11d,dword ptr [rsp+80h]
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: srvnet!FillSessionInfoBuffer+a2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4c7732f4
FAILURE_BUCKET_ID: X64_0x50_srvnet!FillSessionInfoBuffer+a2
BUCKET_ID: X64_0x50_srvnet!FillSessionInfoBuffer+a2
Followup: MachineOwner
As per microsoft technet, we are planning to deploy the hotfix provided in the article
http://support.microsoft.com/kb/980135
Please let us know if another troubleshooting steps needs to be performed. Any solutions please let us know
Thanks
Dinesh -
I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
Mac is running OS X v10.6.8, Safari should be 5.1.10. Or Mac OS X / Version 10.6.8 / Build 10K549 / Serial Number W8****ATM / Processor 2.4 GHz Intel Core 2 Duo / Memory 4 GB 1067 MHz DDR3 or More Info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1,07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W80394HFATM
Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
Sudden Motion Sensor:
State: Enabled
<Personsl Information Edited by Host>buy an external HD 1TB for $60
NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
Unless youre using it every couple weeks, its static data and should be on an external HD
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation. -
SQL 2008 R2 Cluster | change Cluster Disks
Hello,
We have a SQL cluster (for SharePoint 2010) consists of two nodes Windows server 2008 R2 & SQL 2008 r2.
The SQL cluster have MSDTC (Clustered) & SQL services, with total four disks:
Quorum Disk
MSDTC Disk
Databases disk
Logs disk.
Now the old SAN will be decommissioned and new LUNs have added to replace the our disks above. I managed to change Quorum & MSDTC. I used the below robocopy command to copy databases and logs with the same folder structure and permissions:
robocopy t:\ l:\ /E /MIR /SEC /COPYALL /V
I stopped SQL services then swapped drive letters , when I start SQL services it starts without problems (using the new Disks).
But the issue is when I connect to SQL management studio, all databases are in suspect mode. I know there some SQL query to be run against each database , but this a production environment and I don't want to mess with it.
Is there any other way to change cluster disks of SQL cluster? or use the above method without getting into suspect mode?
Thanks, ShehatovichHello, Shehatovich
I you have copied the files while there were still online, that might have been the cause 'suspect' state of your databases.
I would suggest you to follow the steps:
Add the new disks to cluster, with validation in every single Cluster node (then cluster will be able to get the signature of the disks)
Stop SQL Server service.
Copy the MDF and LDF to the new disks,
use the Detach and attach Method. (http://msdn.microsoft.com/en-us/library/ms187858.aspx)
After check tha your databases are online and consistent.
Stop SQL Server service again and remove the disks
Hope it may help you...
Regards,
Edvaldo Castro
Edvaldo Castro http://edvaldocastro.com MCITP Database Administrator on SQL Server® 2008 MCITP Database Administrator on SQL Server® 2005 MCTS: SQL Server® 2008 MCTS: SQL Server® 2005 MCT: Microsoft Certified Trainer MTA: Microsoft Technology Associate
MTAC – Microsoft Technical Audience Contributor CCSQLA – Cambridge Certified SQL Associate TOEIC – Test of English for International Communication -
Cannot add cluster disk on windows 2012
I have 2 servers connected to a shared storage array using Fibre Channel. Currently there are 2 luns on the storage device.
From the Failover Cluster Manager, when I select “Add Disk” from Storage – Disks, both luns show up and I can add them without problems. But if I choose to only
add one of them first (it doesn't make a difference which one is added first), then it will not allow adding the second one later. I get a message: "No disks suitable for cluster disks were found. For diagnostic information about disks available to the
cluster, use Validate a Configuration Wizard to run Storage tests."
When I do add one (or both disks at the same time), they work just fine for failover clustering.
I can’t imagine this is by design. Is this a known/unknown issue, or is there something special that needs to be done?
ThanksOk, no problem. I run the validation tests (Validate Cluster - Storage only) and I received the details shown below. I can clearly see that Cluster Validation tool does not find any disk suitable for 2012 cluster, and even I can see why (it is plain English).
Unfortunately this still does not explain how to fix the problem. Recommendations like "run Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk" do not work - this discussion is available in another thread where
people having the same issue and no luck so far. I guess that I'm using old SAN (and I know that) that simply does not support SCSI-3 persistent reservation so those disks cannot be used in 2012 cluster. Oh well, will have to wait fro new SAN and then I can
play again...
Validation test results:
Physical disk with identifier {95059d50-a173-49bd-b029-fec326acd78c} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {0b301c72-c88f-47ee-9389-11efdeed6cdb} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {eec0be37-5dfe-47f7-a149-4f1dec18450b} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {dcb8b1fe-7671-41c9-b996-da26c0b93751} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
No disks were found on which to perform cluster validation tests. To correct this, review the following possible causes:
* The disks are already clustered and currently Online in the cluster. When testing a working cluster, ensure that the disks that you want to test are Offline in the cluster.
* The disks are unsuitable for clustering. Boot volumes, system volumes, disks used for paging or dump files, etc., are examples of disks unsuitable for clustering.
* Review the "List Disks" test. Ensure that the disks you want to test are unmasked, that is, your masking or zoning does not prevent access to the disks. If the disks seem to be unmasked or zoned correctly but could not be tested, try restarting the servers
before running the validation tests again.
* The cluster does not use shared storage. A cluster must use a hardware solution based either on shared storage or on replication between nodes. If your solution is based on replication between nodes, you do not need to rerun Storage tests. Instead, work
with the provider of your replication solution to ensure that replicated copies of the cluster configuration database can be maintained across the nodes.
* The disks are Online in the cluster and are in maintenance mode. No disks were found on which to perform cluster validation tests. -
Cluster Disk keeps going offline. Service or application failed
We currently have 2 servers, both housing 3 VMs (6 nodes total). 2 Disk are used to house these VM's. Cluster Disk 1 keeps going offline, which kicks 2 of our servers offline until we migrate the disk to another node (puts it into redirected
mode). We then have to restart the server to re-establish to connection to the cluster disk. Digging around in event viewer, I saw the following:
Cluster resource 'Cluster Disk 2' in clustered service or application 'b0a21897-e59b-46c9-a495-273dc5ad2aea' failed.
Cluster physical disk resource 'Cluster Disk 2' cannot be brought online because the associated disk could not be found. The expected signature of the disk was '{92eb716c-6878-42ad-b7de-f3879d72e232}'. If the disk was replaced or restored, in
the Failover Cluster Manager snap-in, you can use the Repair function (in the properties sheet for the disk) to repair the new or restored disk. If the disk will not be replaced, delete the associated disk resource.
The Cluster service failed to bring clustered service or application 'b0a21897-e59b-46c9-a495-273dc5ad2aea' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered service
or application.
I ran the cluster validation test and all seemed to check out except for Cluster Disk 1 and the two servers associated with this server, as shown below:
Validating cluster resource Cluster Disk 2.
This resource is marked with a state of 'Offline'. The functionality that this resource provides is not available while it is in the offline state. The resource may be put in this state by an administrator or program. It may also be a newly created
resource which has not been put in the online state or the resource may be dependent on a resource that is not online. Resources can be brought online by choosing the 'Bring this resource online' action in Failover Cluster Manager.
This resource is marked with a state of 'Failed' instead of 'Online'. This failed state indicates that the resource had a problem either coming online or had a failure while it was online. The event logs and cluster logs may have information
that is helpful in identifying the cause of the failure.
All disks are housed on our SAN. Any idea where I can start troubleshooting further? Changing the signature of the disk or finding out which application is failing? All help is greatly appreciated.Please, help is greatly appreciated. I have been trying to find a solution for almost a week. I have a feeling this has to do with the disk. We have 3 CSV's but the only ones in question are CSV 2 & 3. Cluster Disk 2 is the disk that
keeps going offline. Cluster Disk 3 has no problems at all. They both are GPT volumes, however, after running a "cluster res", I received the following output:
Listing private properties for 'Cluster Disk 2':
T Resource Name Value
D Cluster Disk 2 DiskIdType 1 (0x1)
D Cluster Disk 2 DiskSignature 0 (0x0)
S Cluster Disk 2 DiskIdGuid {92eb716c-6878-42ad-b7de-f3879d72e232}
===============================================================
Listing private properties for 'Cluster Disk 3':
T Resource Name Value
D Cluster Disk 3 DiskIdType 1 (0x1)
D Cluster Disk 3 DiskSignature 994692308 (0x3b49ccd4)
S Cluster Disk 3 DiskIdGuid {4f27bc43-6964-466e-a77d-2321b2b0b718}
=============================================================
As shown, cluster disk 1 has a disk signature but NOT a diskID. Cluster disk 2 as a DiskID but NOT a signature. It may be beneficial to add that cluster disk 3 used to be an MBR disk. Not sure if that makes any difference given the output
above...Performing DISKPART on the same disks shows the following (Don't mind the naming scheme, I know it can be a bit confusing)
Disk 1 (Cluster Disk 2):
HP P2000G3 FC/iSCSI Multi-Path Disk Device
Disk ID: {92EB716C-6878-42AD-B7DE-F3879D72E232}
Disk 3 (Cluster Disk 3):
HP P2000G3 FC/iSCSI Multi-Path Disk Device
Disk ID: {4F27BC43-6964-466E-A77D-2321B2B0B718}
================================================================
Comparing the two, it selects the correct DiskID that was taken from "cluster res" command.
The error in my initial post states a signature was expected. If I am not mistaken, in win2008 it uses "DiskSignature". The lack of this signature being populated for Cluster Disk 2 was resulting in the resources failing to come online. So
how can i go about fixing this signature issue. Again, all help is appreciated since I am fairly new to all of this. -
Windows Server 2012 Cluster Validation Failing On List All Potential Cluster Disks
I'm in the process of setting up a new cluster using Windows Server 2012 with a view to migrate from our existing 2008 R2 cluster. I am having problems validating the storage and the wizard keeps failing on the List All Potential Cluster Disks
test (which causes all the other storage tests to be cancelled).
I'm getting the following error:
Failed while verifying removal of any Persistent Reservation on physical disk 19ba99a4 at node RC-HYPERV-3.riddlesdown.local.
When I look in validation report, disk 19ba99a4 is the management LUN (Access LUN 31 as termed by the storage software).
Looking on my 2008 R2 cluster this doesn't appear in Disk Management.
Any ideas how I can get rid of it or the error that it is causing?
Hi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Aiden
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Aiden Cao
TechNet Community Support -
SCOM 2012 event id 10801 cluster disks don't discovered.
Hello.
I have errors in Operations Manager log:
Discovery data couldn't be inserted to the database. This could have happened because of one of the following reasons:
- Discovery data is stale. The discovery data is generated by an MP recently deleted.
- Database connectivity problems or database running out of space.
- Discovery data received is not valid.
The following details should help to further diagnose:
DiscoveryId: 5a84ee62-20c2-46a2-10b9-3dedaff65df6
HealthServiceId: 3aeaca7c-48de-c0fc-0441-ffd5ef7aa7c3
Microsoft.EnterpriseManagement.Common.DiscoveryDataInvalidRelationshipTargetException,The relationship target specified in the discovery data item is not valid.
Relationship target ID: 2478193e-1a5f-4087-1b5f-95459123321e
Rule ID: 5a84ee62-20c2-46a2-10b9-3dedaff65df6
Instance:
<?xml version="1.0" encoding="utf-16"?><RelationshipInstance TypeId="{acfe2f40-0a73-6764-21a5-bf59c41b2844}" SourceTypeId="{00000000-0000-0000-0000-000000000000}" TargetTypeId="{00000000-0000-0000-0000-000000000000}"><Settings
/><SourceRole><Settings><Setting><Name>5c324096-d928-76db-e9e7-e629dcc261b1</Name><Value>SQL-01</Value></Setting><Setting><Name>af13c36e-9197-95f7-393c-84aa6638fec9</Name><Value>\\.\PHYSICALDRIVE18</Value></Setting></Settings></SourceRole><TargetRole><Settings><Setting><Name>5c324096-d928-76db-e9e7-e629dcc261b1</Name><Value>PDC-S-SQL-01.sibgenco.local</Value></Setting><Setting><Name>af13c36e-9197-95f7-393c-84aa6638fec9</Name><Value>Disk
#18, Partition #0</Value></Setting></Settings></TargetRole></RelationshipInstance>.
SQL-01 is server with clusters disks, and cluster disks are don't discovered.Hi,
Hope the below articles can be helpful:
Cluster resource groups are not monitored! Is there anything I can do?
http://blogs.msdn.com/b/mariussutara/archive/2008/05/03/cluster-resource-groups-are-not-monitored-is-there-anything-i-can-do.aspx
Event ID 10801 and 33333 in Operations Manager log
http://www.itbl0b.com/2014/02/event-id-10801-33333-operations-manager-log.html#.U-QwunmKBes
Please Note: Since site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information the web.
Regards, Yan Li -
After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?
When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)
-
ZFS Configuration - getting different disk target numbers
Hi ,
We are in the process of configuring Oracle 11gR2 RAC, we are using ZFS as ISCSI storage. getting different disk target numbers on both machines. ( disk 4,5 and 6). to configure ASM we need to set the them unique, please help us to reset volume names.
i.e.
4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
Disable ISCSI Multipathing on dev2 and dev3:
cat /kernel/drv/iscsi.conf
set mpxio-disable="yes"
[root@dev3 /]$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
2. c1t2d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
3. c1t3d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
/iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0
5. c2t26d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
/iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
6. c2t27d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
/iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
[root@dev4 /]$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
2. c1t2d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
3. c1t3d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
/pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
4. c2t23d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
/iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
5. c2t24d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
/iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
6. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
/iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0Regards,
SachinI have no room for the ZFS partition on a slice. I
have a lot of free space unallocated to any partition
and this is where I would like the ZFS partition.You would need to allocate it to one yourself.
I
saw a lot of confusion between slices and
partitions.Yes. In many cases they are used interchangably.
However, I often try to use the term "slice" for the solaris label subdivision, leaving "partition" to refer to x86 architecture-specific divisions.
Solaris on x86 can only (easily) use a single x86 partition of type "Solaris". You can't use another partition (whether with ZFS or not).
In my case, I have a 20GB partition where I have 10
slices created when I installed Solaris on UFS.
The 120GB left is not allocated to any slice.If it's visible to the Solaris label, then allocate it to a slice.
Darren -
Cluster Disk Space Report - DESPERATE
Please can someone help the worldwide SCOM community and give us a Cluster Disk Report?
Name your price - I will pay for this.Here's how to do it. We have a 2-node cluster, NODE1 and NODE2. The Cluster Name is WATER. We want a report for a file system that's on the cluster called Backups (the M: drive, but the drive letter doesn't matter, as SCOM uses the name of the file system).
Start with a Performance Detail report. Change your date range to whatever you want. Create a new series. Click on "Add Group" in the "Series Details" section (make sure you pick "Add Group", this is important). Find your cluster name, WATER and choose the
Windows Computer object.(it's odd, but trust me on this!)
In the Rule section, in the Search by Name tab, find the "Windows Server Cluster Disks Monitoring" MP. Pick the rule you want to run the report for, click OK. Back in the Rules section, select "Specific Instances" and find the name of your disk you want
the report for (in our case, "backups").
Here's what the settings/parameters look like when you're done:
Click OK and run the report. That's it!
"Fear disturbs your concentration" -
Hi,
we have installed and configured SCOM to monitor all windows server including Windows cluster. we would like to get the details of the cluster disk health. The information is already available on the dashboard but not as a report.
we would like to have the status in the reports.
how to achieve this ?
BR, PhaixanHi,
Have you imported the management pack for Windows cluster below?
http://www.microsoft.com/en-hk/download/details.aspx?id=2268
Within the management pack, we could find some builtin reports, and if there is no reports that can meet your goal, then we may create report by ourselves. Or we may create views for Cluster Shared Volume Health, and Cluster Shared Volume Disk Capacity.
Please look into the below blog for more details:
http://blogs.technet.com/b/kevinholman/archive/2011/09/30/opsmgr-new-base-os-mp-6-0-6956-0-adds-cluster-shared-volume-monitoring-bpa-and-many-changes.aspx
Regards,
Yan Li
Regards, Yan Li -
Hard drive says I have more than 300 GB available with a 500 gb capacity. Yet I get "Low Disk Space" error messages when I do anything.
Attempted solutions:
-I created a new User Account and I can download large files with no issues.
-I ran "Repair Disk Permissions" but still get warnings.
Google Drive Warning:
Spotify Warning:
But on my other user account I can use spotify and download large files, etc.Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar.
Maybe you are looking for
-
Setting up a Resource Based Calendar with Multiple Permissions
Using SharePoint 2010 we're trying to schedule multiple conference rooms in a single calendar using calendar resources as described here: office.microsoft.com/en-us/sharepoint-server-help/enable-reservation-of-resources-in-a-calendar-HA101810595 (dot
-
Goods issue without sales order
Hello experts, 1) Goods issue without sales order (movt type 251) in T.code "MB1A"* Accounting entry:- Change in stock of Fin. Goods A/c Dr.
-
How do I create a drop box for photos
I am looking for a way to have a place on my church's website where anyone can "drop" photos from events. Is this possible? Would it require a special log in? And if so, could it be made on only allow a person access to the drop box?
-
Logical client creation issue..
Hi, We had setup 2 clients 500 and 700 in QA System for our upgraded ECC system.. and would like to assign a logical systems to respective clients. But when I check the naming conventions IN SALE it is in series like <SID>CLNT401,402,403 and
-
Multiple disc issues with iTunes 9
right after I installed iTunes 9 all of my multiple disc albums are not organized. For instance: it used to order them disc 1: track 1,2,3,4 and now it is track 1,1,1,2,2,2,3,etc. This is buggy!