"Get connected" wont detect available connection t...

When I press the "Get connected Button", and click "next", an error appears and says "There is no available connection and therefore connection to the phone cannot be established. The wizard will exit". After this, another error will appear, "Failed to detect available connection types, please reinstall pc suite".
Well, im using windows xp service pack 2, the usb cable that i have is the ca 53 (included in the n70 music edition box).
Please Help! Thanks in advance!

Same thing is happening here. Pc Suite used to connect perfectly happily. Went to use it today and it gave the error. Tried verifying the install. No change. Uninstalled it and it stuff my anit virus, sorted that out. Re installed Pc Suite still not working. PC spots phone being connected Ok and updates devices as expected. If I click on "Manage Connections" then I get the error, "Connection to Nokia PC Suite failed. Please reinstall nokia PC Suite. (Code: Init IMediaControl2)"
Could this be related to the Microsoft Critical updates released during last week? I haven't used it since doing those but it could be a week or three since I did last connect the phone to the pc.

Similar Messages

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Im having problems with my iPod Touch 2nd gen. It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button Help?

It's disabled and tells me to connect to iTunes. But when I do that, iTunes wont detect the iPod.I have put the iPod in USB- mode, and by that I mean I have tried connecting with holding the home button when connecting the USB. Help?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device?

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.

Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2

My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

Place the device in DFU mode and restore.

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me

I have new I pad 2 and when I get connected to iMac I can't find it detected in I tunes can any one help me and i am new to I pad

If it's not showing on the left-hand sidebar of your Mac's iTunes (if you are on iTunes 11 then you can enable the sidebar via option-command-S) under Devices then see if this troubleshooting article helps : http://support.apple.com/kb/TS1591

I have an iPad3 which crashes often...like 5 times in 2days..nd now it doesnot reboot in anyway. I tried connecting it to my PC...bt the iTunes wont detect the device!!Wht shud i do nw?

I have an iPad3 which crashes often...like 5 times in 2days..nd now it doesnot reboot in anyway. I tried connecting it to my PC...bt the iTunes wont detect the device!!Wht shud i do nw?

Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...

Do i need a Blackberry SIM (Data plan to get connected)

Hello, i have recently purchased a blackberry playbook 32GB.
i have below queries.
1. Do i need to have a BB data plan to get connected..even for the first time or may be later too.
2. Can a micro SIM with normal 2G or 3G data plan work on it say from AIRTEL or VODAFONE.
3. I tried connecting my Nokia E6 as a WIFI hotspot (using JOKU) , but playbook does not detect so..however it detects all other WIFI spots say from SAMSUNG phone.
4. Finaly i got connected with WIFI hotspot provided by SAMSUNG phone and was able to register. But that may not be always available with me. Thats where my second/third question is important.
5. After getting connected as in point 4, software upgrade was in process which was interupted owing to low internet speed. (being EDGE n/w). i am sure after S/W update i shall be able to use it for other purpose.
6. Even if i get a BLACKberry data plan micro SIM, will it work on NON BB smart phones?
7. I am new to BLACKBERRY, please help me.

My first guess is that you bought a former Sprint (US) Playbook, which might not be operable in India.
I just don't know. You might try to return it to your eBay seller and get your money back and purchase a known working device.
Does it connect to WiFi?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[JTA_Start_0]Exception getting connection for Oracle DB

Hi All,
I am facing a problem when I am going to insert data in a table (Oracle DB) using JTA Command Action block. I have deployed the Oracle JDBC driver and Configured the data source in http://<server<:port>>/nwa->Configuration Management -> Infrastructure. But when I am trying to insert data using the JTA Command Action block for inserting data in a table it is throwing error.I am running with XMII 12.1 SP5 and Oracle 11g.
Here is the error details.
[ERROR] [JTA_Start_0]Exception getting connection for jdbc/ODS_ORACLE_SBX was ResourceException occurred in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 0 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine) or they are allocated from a non transactional ConnectionFactory. In case of transactional ConnectionFactory used from Application Thread there is an automatic mechanism which detects unclosed connections, 2)The pool size of adapter "ODS_ORACLE_SBX" is not enough according to the current load of the system . In case 1) the solution is to check for cached connections using the Connector Service list_conns command or in case 2), to increase the size of the pool.
Note: ODS_ORACLE_SBX is the Data source name which I have configured.
If I increase the min pool size from 0 to 5 or more than 0 then Data source is getting red means not Available.
Can anybody provide any help.
Thanks in advance
Chandan
Edited by: Chandan Jash on May 3, 2011 4:25 AM

You set up your Oracle DB connection by following the path 'xMII Menu -> Data Services -> Data Servers -> New'.
Re: Configure Oracle in MII 12.0
Regards,
Chanti.

Get Connected issue PC Suite 6.8 and 6.7

Info:
Windows XP SP2, Nokia PC Suite Version 6.81.13.0, Connectivity Cable Drivers: Version 6.81.1.2
Nokia 6680, firmaware V 2.23.05
I have installed the new PC Suite, had 6.7 running before and that worked fine for Bluetooth and cable connection. Now with new PC Suite I get the error message at the ´Get Connected Wizard´ that there is no available connection found and the connection to the phone cannot be etablished. Second message states "Failed to detect available connection types, please reinstall PC Suite".
I reinstalled several times, even uninstalled (used the uninstaller of PC suite too) and installed 6.7 again but get the same message there now as well.
Bluetooth itself sees the phone and is already paired with it again. Under Device Manager, I can also see the USB connection (Cable).
Please help me fixed this issue, what is preventing the Connection Wizard to see my existing connection to the phone?

Hello Manta and fuzzy_logic, Thanks for the quick reply, tried both suggestions, even uninstalled pc suite and reinstalled it, to no avail.
If I go to manage connections I get the following error message " Connection to PC Suite failed. Please reinstall Nokia PC Suite. (code: init IMediaControl2).
Regards,
Pieter

Free? Setup and Connection in "Get Connected"

Just to see if anyone had the "No connection Fee" experience with the recent BT's promotion in their "Get Connected" package.
My BT line was installed on 28th Jan after joining above promotion which was due to expired end of Jan 2010 and was extending, probably still going, in which the setup and connection fees are waived if signed up for 18 months, which I did.
The first bill came at beginning of Feb showing the full connection fee of £124.99, I had to call BT to sort this out, the voice at BT said, oops, discount show have been given, admin error !! The money will be credited in the next bill (28th Feb) and the options I was given were
1) Pay the full bill (as I've DD setup to do so already) then get the credit in my next bill - no chance, I rather keep the money in my pocket!!
2) Cancel the DD, suspend the payment, wait for next bill (with the credit), then everything will sort itself out - this was the option I then agreed.
However, I have lost out the discounts on line rental (From DD and paperless billing) and I can't setup the account till the Feb bill has been paid.
So from a BT admin error, it cost me both time (to sort this out on the phone and re-setup the DD) and money due to loss of rent discounts (and I don't know when I can setup the DD as the website is not allowing me to do it currently, may be due the the Account is being suspended).
What a hassle, all from a BT admin error !!

The situation is getting more and more in BT's favour!!
This month's bill (dated 28th Feb '10) has eventually available online on 2nd March. Correct, the £124.99 connection charge has been reversed but on the date of the credit, from the basic Weekend only package, I'm now on Evening & Weekend Package costing an extra £2.99 per month - which I absolutely do not need !!
So I phone up and eventually spoke to a very nice gentleman in Billing Section, agreed to the, yet an operator error by enterring a "wrong" code causing the upgrade of Calling Plan. Also agreed to credit me with the manual payment processing fee of £1.50. Unfortunately, after over half an hour on the phone, not able to change my Calling Plan Back and said he'll have to pass it onto someone else to sort out the next day, which would be acceptable as he did genuinely want to help.
I kept a close eye on the Calling Plan details online over the last 2 days, all the changes (and credits) have been actioned and can be seen online, great, I thought, until I looked at the calling plans page. I'm now on 2 plans costing me a total of £23.08 per month !!!!
The Weekend only plan is £11.54/month which is correct, but I'm also on "the weekend + free connection package" also costing £11.54/month giving a total of £23.08 per month, I assumed this will start from the previous change date as requested by me.
The only way to explain all this is the BT System has been program in such a way that doesn't matter how had the operator tries, the end only way the changes can be accepted is by charging more month per month !!
Come on software guys (or is it management?), please sort this out, this is not accetable !!

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Put, Get , Connection buttons greyed out

Hi All,
I am pretty new to Dreamweaver but not to web development. I
have set up and connected a few sites from my own PC. It all goes
just like it says in the manuals.
But I got called into a client site who have an existing site
set up in Dreamweaver. The DW person left and the current person
wanted some coaching. Well the Code, Split, Design views all came
up and we could edit just fine.
But over on the right, above the list of files, all the
buttons (put, get, connection etc.) were greyed out. At first I
assumed the FTP connection was not set up, but it was, because when
we saved files, they saved straight to the live site.
So I went over to look at Site / Manage Sites. The FTP
connection was listed, but many of the other options (all the
categories within Advanced) did not seem to be available. They were
not just grayed out - I could not even see the list of them.
I have been fiddling around at home on my own sites, trying
to figure out how to recreate this and I can't. I can figure out
how to put myself onto live updating (update to remote FTP on Save)
but I don't get the other buttons greyed out just because I am
working like this.
Any ideas? I'd like to be able to go back there, take them
off live updates and restore the buttons.
Thanks
Abigail

Unless one is working in ColdFusion, or has special
requirements, the FTP &
RDS server option should never be used.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Alan" <[email protected]> wrote in
message
news:C4F834C6.30E30D%[email protected]..
>A guess- they set this up as an "RDS" ftp site, and it is
editing the live
> files on the server.
>
> To make a regular ftp site connection, make a New site.
> If it's CS3 version, make sure you pick "site" and not
"RDS"
> Enter all the details, and make a "regular" ftp
connection, not an RDS
> connection.
>
> --
> Alan
> Adobe Community Expert, dreamweaver
>
>
http://www.adobe.com/communities/experts/
>
>
>

How to get connected to OIPM from Oracle WebCenter Document Capture

Hi,
How we get connected from Oracle WebCenter Document Capture(ODC) to Oracle WebCenter Cintent:Imaging (OIPM). OIPM is 11g and ODC is 10g. Pls suggest any doc or link.
Thanks and Warm Regards,
RR.

Reading your previous question once again, now I think you have actually asked a simpler question than I answered to. Is it that you just need to anyhow send data from ODC to IPM?
If so, it is a standard functionality of ODC, called Commit Profile. I have never worked with IPM, but there is one to UCM and it works the way that you use administrator's login (such as sysadmin in 10g or weblogic in 11g) for authentication and then you map ODC user to a metadata field (in UCM there is a mandatory field called dDocAuthor and there should be value of an existing user; but you can you the administrator here as well, if ODC user info is not important for you). I believe IPM will behave similar.
What you have to check, whether commit profiles are available for IPM 11g, but I believe they are.
As for the documentation, the link I mentioned before contains both installation and configuration manual, so you should find all the info there.

My iPhone 4 (iOS 5) does not get connected to Time Capsule WiFi

Well, as you can read in the title that’s my problem.Everything was ok but suddenly my iPhone 4 (iOS5) was not able to connect theWiFi Lan Created by the Time Capsule (Gen 1). The strange thing is that myMacBook Pro and my girlfriend’s iPhone 4 (iOS5) work perfectly, they getconnected to the WiFi. And the stranger thing is that the problem occurs onlyin my house, I can get connected at work, star bucks, malls, everywhere but myplace.
When I go to Settings-> Wi-Fi -> I can see my networkin the list of network available, and when I tap on it and entered the passwordit seems that it is going to get connected… but never gets connected, and nomessage is displayed.
I have tried the following with no results; I hope you canhelp me
In Time Capsule:
Ireseated the Time Capsule and also the Modem
Ichecked that the TC don’t have permissions(Mac Address)
Iturned off both the TC and the modem.
IRestored the TC configuration
IChange the Name and password of my WiFi
In the iPhone
Iturned off/on the WiFi
Irenewed the concession
Irestarted the iPhone
Ireset network Setting
IReset the iPhone
Ieven restored the iPhone to its original set up

Having the same issue. Iphone 4 at 5.0.1, Itunes at 10.5.1 iMac at 10.7.2. Synch session fails to start either wi fi or USB connected. Don't know if it is related, but since turning on Match the Music app crashes on the iPhone. No problems on iPad 1, though

"Get connected" wont detect available connection t...

Similar Messages

Maybe you are looking for