GET HOSTNAME SERVER IN PL/SQL

Hi
Is it possible to get the hostname of my unix server where my database is located in a pl/sql procedure ?
I try to use sys_context('userenv','host') but it show me the hostname of my client where i launch the procedure not the hostname server.
Is it possible to do such things ?
Thanks.

The same question has been asked yesterday here
Re: Is the server name the Database is running on stored in a system table?

Similar Messages

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

How to get the server name/hostname on which JVM is running?

How to get the server name/hostname on which JVM is running from the Servlet or normal class?

InetAddress.getLocalHost()

How to get hardware related metrics of SQL Server through query ?

Hi Folks,
I am newbie to the SQL Server programming. I also follow this forum only now. I am not sure if these kind of question had been asked in the past. Let me furnish you more detail about my query. I do like
to get few details regarding the SQL server. I do need the following details to get the information about it through query
SQL Server Installation directory
No. Of CPU(as i read SQL Server standard support 4 cpu and Enterprise support 32 CPU)
CPU Speed of the SQL Server installed machine
Disk Storage details
Operating system on which the SQL Server is installed
Location of the swap file of SQL Server
TempDB directory path
System database directory path
User database location
Log files location
I do like to get information like this through query. Can i know if such information can be get through query or it should be get only thro' WMI. Please drop your ideas in getting these details.
Thanks in Advance,
Regards,
JeiSurya

Try this query in the below link
http://gallery.technet.microsoft.com/Query-to-find-all-the-8fa765e6
you will get the SQL Server and H/W Details like
IP Address
FQDN
CurrentSQLNodeName
SQL Instance Name
SQL Server Product
SQL Server Edition
Service Pack
SQL Server Version
Operating System
OS SP Level
OS Build Number
SystemManufacturer
Processor Type
System Model
Total RAM in MB
NumberOfPhysicalCPUs
NumberOfCoresInEachCPU
TotalNumberOfCores
NumberOfLogicalCPUs

Equivalent of "connect by " clause in SQL Server's T/SQL to get family tree branches

Is there any equivalent command in SQL Server's T/SQL for the command :-
select parent, offspring from table_family start by offspring='child1' connect by parent=PRIOR offspring

Is there any equivalent command in SQL Server's T/SQL for the command :-
select parent, offspring from table_family start by offspring='child1' connect by parent=PRIOR offspring I had this problem some time ago. I don`t found an eqivalent on MS-SQL-server 7.0. So I wrote a T-SQL procedure wich calls itself recusively. ( I don`t have the souce-code any more ).
I don4t know if there is an equivalent on MS-SQL-server 2000.

Unable to install SQL Server CE Server Tool on SQL Server 2000 SP 4

Hi
I am facing problem with installing SQL Server CE Server Tool,
I have installed SQL Server 2000 SP 4 which is working fine.
While i am running Setup of "SQL Server 2000 Windows CE Edition version 2.0" ,Developer tools installed successfully but incase of SQL Server CE Server Tool i am getting following Error
"SQL Server CE Tool is compatible only with SQL Server 2000 Service pack 1 and higher.
When you install SQL Server CE Server Tools on a computer running both IIS and SQL Server 2000 , ensure the installer for SQL Server CE Server Tools corresponds To the version of SQL Server 2000."
I am sure that i have running SQL Server 2000 SP 4 (MSDE also SP 4) , IIS (Version 5.1) is also working fine , and one more thing i am trying to install SQL Server CE Server Tool setup is "sqlce20sql2ksp4.exe" (Which i downloaded from microsoft site.).Here all the requirement is fulfill but i dont know what is going to wrong.
I wasted my 2 days behind solving this issue , now i am tiered ,So please any one have solution for this issue.
Help me please.
Thanks in advance.
Regards,
Ketan Gohil
([email protected],[email protected],[email protected])

Refer this link,
http://social.technet.microsoft.com/Forums/sqlserver/en-US/a8591747-689d-4a2e-b301-86094daf6cec/unable-to-install-sql-server-ce-server-tool-on-sql-server-2000-sp-4?forum=sqlce
http://www.vbforums.com/showthread.php?472623-Compatible-SQL-Server-CE-installer
Regards, RSingh

Search Problem with SharePoint 2010: Get Internal server error when doing search

Hi,
Am getting Internal server error, corelation id.. when I use the search functionality in SP2010.
I've installed Sharepoint 2010 trial version on windows server 2008 r2 and the database server used is a SQL server 2008 R2.
I got the following messages with ULs viewer for the relative Corelation ID:
Process
Product
Category
Level
Message
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Search Statistics). Execution Time=404.4175
w3wp.exe (0x1808)
SharePoint Server
General
Medium
Constructed a new async cache named Location Configuration Cache
w3wp.exe (0x1808)
SharePoint Server Search
Administration
High
'SharePoint_SearchApplicationProxy', location cache:
Refreshing location cache
w3wp.exe (0x1808)
SharePoint Server Search
Administration
High
SharePoint_SearchApplicationProxy', location cache: Exception while fetching
location configuration data. StackTrace: Microsoft.SharePoint.SPEndpointAddress
NotFoundException: There are no addresses available for this application.
at Microsoft.SharePoint.SPRoundRobinServiceLoadBalancer.BeginOperation()
at Microsoft.Office.Server.Search.Administration.SearchServiceApplicationProxy.
GetLocationConfigurations(Int64& lastUpdate, Boolean& useCrawlProxy)
at
Microsoft.Office.Server.Search.Administration.LocationConfigurationCollection.
PopulateCollection()
at Microsoft.Office.Server.Search.Administration.
LocationConfigurationCollection.Init()
at Microsoft.Office.Server.Search.
Administration.LocationConfigurationCollection..ctor(SearchServiceApplicationProxy
searchAdmin)
at Microsoft.Office.Server.Search.Administration.LocationCache.
FetchLocationConfigurationData()
w3wp.exe (0x1808)
SharePoint Server Search
Query
Unexpected
CoreResultsWebPart::OnInit: Exception initializing: System.NullReferenceException:
Object reference not set to an instance of an object.
at Microsoft.Office.Server.
Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at
Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
w3wp.exe (0x1808)
SharePoint Server Search
Query
Exception
Internal server error exception: System.NullReferenceException: Object reference
not set to an instance of an object.
at Microsoft.Office.Server.Search.WebControls
.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.
Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e) System.
NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.
SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.
CoreResultsWebPart.OnInit(EventArgs e)
w3wp.exe (0x1808)
SharePoint Server
Unified Logging Service
Monitorable
Watson bucket parameters: SharePoint Server 2010, ULSException14, 06175311
"sharepoint server search", 0e00129b "14.0.4763.0", 17853a8f "microsoft.
office.server.search", 0e00129a "14.0.4762.0", 4bad937d "sat mar 27 09:11:25
2010", 0000320d "0000320d", 0000002d "0000002d", 4a6d3421 "nullreferenceexception"
, 67316a39 "g1j9"
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Search Action Links OnInit). Execution Time=395.3955
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Add WebPart with error#4). Execution Time=527.8118
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
High
Leaving Monitored Scope (Add WebParts). Execution Time=3601.2636
w3wp.exe (0x1808)
Web Content Management
Publishing
Medium
Caught a thread abort exception in TemplateRedirectionPage.ProcessRequest,
the exception may be expected. stack trace=
at System.Web.UI.Page.
ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean
includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at
System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP.SEARCHRESULTS_ASP
X__1518441470.ProcessRequest(HttpContext context)
at Microsoft.SharePoint.
Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)
w3wp.exe (0x1808)
SharePoint Foundation
Monitoring
Medium
Leaving Monitored Scope (Request (GET:http://nestestsp:25943/Pages/results.aspx
?k=home%20nesintranet)). Execution Time=3811.6724
Can anybody help me find a solution for this issue.
Thanks

After making sure that all services are up and running, I had to deactive and activate the "SharePoint Server Site Search" web site collection feature. Then the search started working for the time being.
However, it throws the error again after 8 to 9 hours. This has been happening for last couple of weeks. I also came to know from my windows server team that they moved the AD from one place to another. Since then I am having this issue.
The log file has the following error:
CoreResultsWebPart::OnInit: Exception initializing: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
Internal server error exception: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e) System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.SetPropertiesOnQueryReader()
at Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart.OnInit(EventArgs e)
Harish Vajja

Error updating data source from SQL Server ODBC into SQL Native Client 10.0

I am converting Crystal 8.5 reports into Crystal XI release 2. The data source was ODBC using SQL Server 2000 and pointing to a stored procedure. In the new server the data source has to be ODBC again, but it uses the SQL Native Client 10.0 Driver, because the new server is SQL Server 2008. I have copied the same old stored procedure on the new server and it works fine as a data source to a brand new Crystal XI report. But when I am opening an existing 8.5 version crystal report and updating the data source to the new location I get the error message "Some tables could not be replaced, as no match was found in the new data source".
I thought I could tackle this error by creating a temporary data source using the standard ODBC SQL Driver linked to the SQL 2008 Server instead of the SQL Native Client 10 ODBC. So I first updated the crystal data source to link to this temp ODBC using SQL Driver and it worked fine. But after that, when I try to update the data source to link to the SQL Native Client 10 ODBC, I get the same error again.
So I guess that the problem is not the new server itself, but the switch between SQL Server ODBC and SQL Native Client 10 ODBC.
Does anyone know what's going on with this SQL Native Client 10 in updating crystal report data sources?

CR XI does not support that driver. Try selecting the Native driver or upgrade to CR XI R2 for free and use SP4, 5 and 6 and then FP 6.4 or upgrade to CR 2008 and SP 3 and Fix Pack 3.3
Thank you
Don

Connect Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000

Hi all,
I am trying to connect:
Oracle 11g (64-bit windows server) to Microsoft SQL Server 2000 (32-bit) on a different machine.
1) I have create an ODBC connection (called:GALAXY) which connects.
2) created a init.ora called it initgalaxy.ora in $oracle_home\hs\admin
HS_FDS_CONNECT_INFO = GALAXY
HS_FDS_TRACE_LEVEL = on
3) modified the listener.ora file as below
# listener.ora Network Configuration File: E:\Ora11g\product\11.1.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = extproc0))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC =
(GLOBAL_DBNAME = HEX.BIU01.kingsch.nhs.uk)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(SID_NAME = HEX)
(SID_DESC=
(SID_NAME = galaxy)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
(PROGRAM = dg4odbc)
(SID_DESC =
(PROGRAM = EXTPROC)
(SID_NAME = PLSExtProc)
(ORACLE_HOME = E:\Ora11g\product\11.1.0\db_1)
4) modified the tnsnames.ora file is as follows
GALAXY =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SID = galaxy)
(HS = OK)
HEX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = BIU01.kingsch.nhs.uk)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HEX)
5) restarted the listener
6) created a public database connect
create PUBLIC DATABASE LINK "GALAXY" CONNECT TO "USER" IDENTIFIED by "PWD" USING 'galaxy';
This is the error message I can sell in $oracle_home\hs\admin\trace
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- MONDAY APR 27 2009 11:54:18.370
Version 11.1.0.6.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using galaxy_live as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
##>Connect Parameters (len=42)<##
## DSN=GALAXY;
#! UID=galaxy_live;
#! PWD=*
hgocont, line 1890: calling SqlDriverConnect got sqlstate IM002
when I try to test the database link, I get this error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Drive Manager] Data source name not found and no default driver specified
ORA-02063: preceding 2 lines from GALAXY
28500.00000- "connection from ORACLE to ad non-Oracle system returned this message:"
*Cause: The cause is explained in the forwarded message.
*Action: See the non-Oracle system's documentation of the forwarded message.
vendor code 28500
Edited by: user7336435 on 27-Apr-2009 05:56

11.2 is beta at the moment. There is no official release date so far.
As DG4ODBC is independant from the Oracle database (or the target database) you can use a 3 machine model:
On the first machine you have your Oracle database, on a second machine running 32bit Windows you can install DG4ODBC and on the 3rd machine you can run your foreign database.
If the SQL Server 2k is installed on a 32bit Windows machine, then you can also install DG4ODBC on this machine.
In general the connection from an Oracle database to the DG4ODBC machine is done using SDQL*Net. The listener responsible for DG4ODBC will then load the DG4ODBC executable which will connect to the SQL Server using SQL Server ODBC driver.

Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!

Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How do I load an SSIS package created in Visual Studio 2012 Shell (Integrated) onto SQL Server 2012 using SQL Management Studio 2012

I am fairly new to this whole process of working with the Microsoft development environment. Here is what I have to work with:
an NT server running Microsoft SQL 2012 - Microsoft SQL Server Standard (64-bit) 11.0.2100.60
and on my laptop (all freebie downloads):
SQL Server Management Studio 2012 ver 11.0.2100.60
Visual Studio 2012 Express for Desktop Development and
Visual Studio 2012 Shell (Integrated)
I was able to create an SSIS package in
2012 Shell (Integrated). It takes a flat file and imports it into an SQL database table. It runs successfully from within the
2012 Shell (Integrated) envrionment.
But I am having trouble figuring out how to set this up on the 2012 SQL Server. I see that one of my colleagues created an Integration Services Catalog,
and using SQL Management Studio I was able to create a folder under that called DigLic. But when I go to the Projects subfolder of DigLic and attempt to import my SSIS package, I get an error message:
"To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server
2012 Standard, Enterprise, Developer, or Evaluation Edition. To install a component, run SQL Server Setup and Select the component name"
I realize that Express Versions of Visual Studio lack the full feature set of a professional version. But am I wrong in assuming that owning a server version of SQL Server 2012 gives us license to a professional
version of SQL Management Studio 2012? If so, how would I go about getting this software component installed? And I am not clear if this is something that needs to be installed on our SQL Server or if I simply need a professional version of SSMS
loaded on my laptop.
I work for a company that is fairly fractured in its repsonsibilities, so I would need to know exactly what to ask for if I need to track down any licenses that I might need and if I need to have any specific software installed on our SQL server or on my
laptop.
All helpt would be greatly appreciated.
Thanks!

Arthur,
Thank you for your reply. But at this point, one of my points of confusion is what software I have available to me. I wish I had a useful central help desk to call up and just say, "Hey, load me up with all of the professional version(s) of Visual
Studio. But I do not know what we have license to. And I kind of need to know what the options are, so that I can ask a specific question of our vast buracracy.
For now, I have downloaded only free versions of Visual Studio client software. Since my company does have servers running Microsoft SQL Server, I am going to assume that we have proper licensing for those servers. But does that server license
allow me to get any professional versions of the PC client software for the various Visual Studio(s) 2012?
And if I get a professional version of Visual Studio 2012, does that do away with the three different flavors that I have right now? I have 2012 versions of SQL Server Management Studio, Visual Studio Express, and Visual Studio Shell (Integrated).
Your feedback is much appreciated.
Thanks!

Changing sql server service and sql server agent service startup account in SQL Server hosting SharePoint DB

Hi
i have a sharepoint deployment with one SQL Server (running on VM) hosting the config DB and another SQL Server (Physical Host because VM was running out of space) to host the huge Content DBs. I need to schedule automatic backups of the Content DBs to a
network share. For that i need to run the SQL Server Service with an account having permissions to the share as suggested in https://support.microsoft.com/kb/207187?wa=wsignin1.0
I tried changing the logon as a service account to a domain
account which has permissions to the Network Share and is also in local Administrators group of SQL Server and has "public and sysadmin" roles in SQL Server but that caused an issue. the SharePoint Web Application started showing a White Screen so
I had to revert back to the default accounts i.e. NT Service\SQLSERVERAGENT and NT Service\MSSQLSERVER. I viewed the event logs . These are the types of error i got after changing the logon as a service account to a domain account
1) Information Rights Management (IRM): Retried too many times to initialize IRM client. Cannot retry more. Retried times is:0x5.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5148
Version
15
Level
2
Task
9
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T04:46:04.750899500Z
EventRecordID
176477
Correlation
[ ActivityID]
{8FACE59C-1E17-50D0-7135-25FDB824CDBE}
Execution
[ ProcessID]
6912
[ ThreadID]
8872
Channel
Application
Computer
Security
[ UserID]
S-1-5-21-876248814-3204482948-604612597-111753
EventData
hex0
0x5
2)
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
System
Provider
[ Name]
Microsoft-SharePoint Products-SharePoint Foundation
[ Guid]
{6FB7E0CD-52E7-47DD-997A-241563931FC2}
EventID
5586
Version
15
Level
2
Task
3
Opcode
0
Keywords
0x4000000000000000
TimeCreated
[ SystemTime]
2015-02-02T07:01:35.843757700Z
EventRecordID
176490
Correlation
[ ActivityID]
{50B4E59C-5E3A-50D0-7135-22AD91909F02}
Execution
[ ProcessID]
6912
[ ThreadID]
5452
Channel
Application
Computer
Security
[ UserID]
S-1-5-17
EventData
int0
0
string1
The target principal name is incorrect. Cannot generate SSPI context.

Hi Aparna,
According to your description, you get the above two errors when scheduling backups of Content DB. Right?
Based on those two error messages, they are related to the service principal name(SPN) for SQL Server service. Please verify the if the SPN is registered successfully. You can view it in ADSI Edit or use command line. Please see:
http://blogs.msdn.com/b/psssql/archive/2010/03/09/what-spn-do-i-use-and-how-does-it-get-there.aspx
When installing SQL Server, those two services below should be registered:
MSSQLSvc/servername:1433
MSSQLSvc/servername
Please check if those SPNs or duplicated SPNs exist. You can use command to reset SPN or remove duplicated SPN and add new one. See:
Setspn.
We have also met this issue when this SPN is registered under Administrator. Please try to register it under Computer. You can add it in ADSI Edit.
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

Installing PeopleSoft HRMS 9.0 on Windows Server 2008 with SQL Server 2008

Hi there,
Recently I was involved to develop a POC with PeopleSoft and as I was very new to PeopleSoft, I had bunch of issues while installing PeopleSoft. It took me almost more than couple of weeks to finally get the PeopleSoft Application up and running.
I had bunch of questions also asked in this Oracle forum like :
Step by Step PeopleSoft HRMS Installation from scratch.
Tuxedo10gR3VS2008 patches absolutely needed for Peopetools Installation
Thanks to the replies from all you folks. That helped a lot. Anyways, so I thought of just writing a blog about the things I did while installing PeopleSoft on Windows with SQL as backend DB. There are many posts already on the web describing the steps but mostly with Oracle DB and Linux. Hence, here are the posts for PeopleSoft on Windows:
http://geekswithblogs.net/BizTalkUnleashed/archive/2012/01/24/installing-peoplesoft-hrms-9.0-on-windows-server-2008-with-sql-again.aspx
Hope it helps to newbie's in PeopleSoft Apps like me.
Regards,
Vishal Mody
Edited by: 897150 on Jan 25, 2012 10:11 AM
Edited by: 897150 on Jan 25, 2012 10:13 AM

Vijay
I hate to be rude, but I am following you for a couple of days now on this forum and even in the same tread and it looks like you do not want to helped, you just want quick answers. I do not see you putting any effort nor show any respect for the product or the people how try to help you. Keep in mind that everyone on this forum is voluntarily posting answers, nobody is getting paid, and I'm sure you do not pay to post here either, so please do not use words as asap and immediate.
You started of wrong, by following a post and not following the installation manual and even tried installing the wrong components.
The post was written by someone with experience on the subject who meets the installation requirements, with all respect to the poster of the blog.
I have to backup Nicolas in his saying.
Nicolas has asked you to use better thread title (more informative than just "installation help") and you created a new thread with this subject.
This does not say anything about the issue you are facing now.
I doubt you can successfully complete this installation, not meant personally, but you are using the wrong software, on the wrong OS, with no documentation.
My advise:
Stop with what you have done until now and start all over by following the installation manual and hardware & software requirements.
If you really want to master a PeopleSoft installation, you can follow following course at Oracle University: PeopleSoft PeopleTools Installation & Server Admin. Rel 8.50
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D61702GC10&p_org_id=1001&lang=US
Do not forget you are trying to install an ERP system, this is not done by starting an installer and clicking on the Next button three times.
Hakan

Server editions of sql server and specialised editions of sql server

hi,
iam new to sql server. i have started reading an article in MSDN regarding the editions of sql server.the article says with the different headings as "server editions of sql server 2008r2"
which includes (datacenter,standard and eneterprise) and where as other one "specialsed editions of sql server 2008r2" includes(sql server developer, sql server web,sql
server workgroup,sql server express ,sql server express with tools etc..).
here my question is ,what is the difference between these headings.could anyone explain to me? thank you...!!

here my question is ,what is the difference between these headings.could anyone explain to me? thank you...!!
The difference lies in features they support and provide. Not all editions of SQL Server provide every capability of database. Like express edition has limit of 10 G database, 1G memory 1 CPU. Standard edition cannot use Partition etc. To get list of features
supported please read below BOL article
https://msdn.microsoft.com/en-us/library/cc645993%28v=sql.105%29.aspx
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

500 Internal Server Error - java.sql.SQLException: Invalid column index

500 Internal Server Error
java.sql.SQLException: Invalid column index     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)     at oracle.jdbc.driver.OracleResultSetImpl.getObject(OracleResultSetImpl.java:851)     at com.stardeveloper.servlets.db.InsertServlet.doPost(InsertServlet.java:88)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)     at java.lang.Thread.run(Thread.java:534)
This is the connection part of the java code
     // connecting to database
          Connection con = null;
          Statement stmt = null;
          ResultSet rs = null;
          PreparedStatement ps = null;
          try {
               Class.forName("oracle.jdbc.driver.OracleDriver");
          con=DriverManager.getConnection("host:port:sid, userName, password");
               String sql;
          sql = "INSERT INTO USERSS(user_id, username) VALUES (?,?)";
               ps = con.prepareStatement(sql);
               stmt = con.createStatement();
               // inserting records
               if(proceed) {
                    ps.setString(1, user_id);
                    ps.setString(2, username);
                    ps.executeUpdate();
desc userss;
Name Null? Type
USER_ID NOT NULL NUMBER(5)
USERNAME VARCHAR2(15)
Index_Name table_name
USERSS_PK1 USERSS
when I try to insert values, it is inserting, but at the end I am getting the above error. I am using JDeveloper 10g and database [Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production]

I suggest you should alter the JDBC Driver and select one for Oracle 9i.
Which version is your JDev10g?

GET HOSTNAME SERVER IN PL/SQL

Similar Messages

Maybe you are looking for