Get More Info for NetConnection.Connect.Failed Error?

I have a single server that runs IIS and FMS, both on port 80. The server has two internal IPs assigned to it, one for IIS and the other for FMS. I also have two static public IPs. My router maps one public IP to IIS' internal IP and likewise for FMS.
IIS works fine. Using an online port scanner, I was able to determine that port 80 is responsive for both public IPs. Before I had configured my Adapter.xml and fms.ini, only IIS' public IP was responsive. This seems to indicate that FMS is fine.
However, when my ActionScript creates a NetConnection and calls connect(), my netStatus callback takes about half a minute to be invoked, and I get "NetConnection.Connect.Failed". Which is not very informative. Is there a way to get more info about the cause of the error? Also does anyone have suggestions for how to debug this issue?

Hi,
Thanks for trying out FMS..
I can guide you with few checkpoints to first see where the problem might be.
1. Go to the FMS installation directory and check for the logs folder. See all the logs (according to date) and find if the port bindings are all successful. This might tell us whether FMS actually has started or not.
2. FMS works on port 1935 for RTMP streaming. It also gets bundled with apache (listening on 8134) but one of the fms processes also takes hold of 80 for its tunneling streaming as well as redirecting to apache. So either you remove this entry from fms.ini or change it to reflect to some other port. ADAPTER.HOSTPORT is the variable to look for.
3. How are you making sure that FMS is working/not working ?
4. Please turn off your firewall or other secutiry for testing purposes to see if you are able to hit the FMS .
Let us know if any of the above are helpful in getting some more information.
Thank you !

Similar Messages

Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500

I get the following error when trying to connect to my BlazeDS Java server from Flex application. Flex application is on localhost:80, blazeDS on tomcat localhost:8080. Please help!
createUser();faultHandler():(mx.messaging.messages::ErrorMessage)#0
body = (Object)#1
clientId = (null)
correlationId = "9FFDEBE8-EAD0-F3D9-8E9B-E3D7D7F5AE79"
destination = ""
extendedData = (null)
faultCode = "Client.Error.MessageSend"
faultDetail = "Channel.Connect.Failed error NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
faultString = "Send failed"
headers = (Object)#2
messageId = "98F54E19-7B0D-DCB9-4B86-E3D7D84E484F"
rootCause = (mx.messaging.events::ChannelFaultEvent)#3
    bubbles = false
    cancelable = false
    channel = (mx.messaging.channels::AMFChannel)#4
      authenticated = false
      channelSets = (Array)#5
      connected = false
      connectTimeout = -1
      enableSmallMessages = true
      endpoint = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      failoverURIs = (Array)#6
      id = (null)
      mpiEnabled = false
      netConnection = (flash.net::NetConnection)#7
        client = (mx.messaging.channels::AMFChannel)#4
        connected = false
        maxPeerConnections = 8
        objectEncoding = 3
        proxyType = "none"
        uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      piggybackingEnabled = false
      polling = false
      pollingEnabled = true
      pollingInterval = 3000
      protocol = "http"
      reconnecting = false
      recordMessageSizes = false
      recordMessageTimes = false
      requestTimeout = -1
      uri = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      url = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      useSmallMessages = false
    channelId = (null)
    connected = false
    currentTarget = (mx.messaging.channels::AMFChannel)#4
    eventPhase = 2
    faultCode = "Channel.Connect.Failed"
    faultDetail = "NetConnection.Call.Failed: HTTP: Status 500: url: 'http://77.93.202.150:8080/QuizDS/messagebroker/amf'"
    faultString = "error"
    reconnecting = false
    rejected = false
    rootCause = (Object)#8
      code = "NetConnection.Call.Failed"
      description = "HTTP: Status 500"
      details = "http://77.93.202.150:8080/QuizDS/messagebroker/amf"
      level = "error"
    target = (mx.messaging.channels::AMFChannel)#4
    type = "channelFault"
timestamp = 0
timeToLive = 0

halodev:
I made a CF/Flex site based on the Flexstore sample app,
using a database instead of XML as the data source; in case you
want to see it:
http://www.timos.com/dg/flex/DilemmaGames.html
At first I had troubles similar to what you describe;
initially, part of the problem was that my hosting company had not
yet upgraded to CF 7.02. One other thing I had to correct: when you
upload to your server, upload the entire ‘bin’ (or
whatever your output folder is) minus the debug SWF.
If it would help with other issues, contact me and I will be
glad to make my project code available to you. Good luck.
Carlos
[email protected]

Error: getting dev info for Tape - unrecoverable error

Hi,
I have configured a Oracle Secure Backup version 10.4.0.1.0_LINUX64.
It was working corretly until yesteday that i can't mount the tape because this error appears:
Error: getting dev info for Tape - unrecoverable error
I run this command with obtool:
ob> lsdev -lvg
***0 wst__set_mode: bus 0, target 0, lun 0: IBM,ULTRIUM-HH4,B6W1
***0 wst__get_sn: code=0x0
***0 wst__info: infolen=0xd8, info=0x7fff007bf050
***0 wst__dev_state...
***0 wst__exec: op=0 (nop), buf=0x0, count=1 (0x1), parm=0x0
ioctl_op=0x3, to=300, datalen=0x0, buf=0x0
cdb: 00 00 00 00 00 00 tur
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 0, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__exec: op=7 (readpos), buf=0x7fff007bee60, count=20 (0x14), parm=0x0
ioctl_op=0x5, to=180, datalen=0x14, buf=0xd1e2fc8
cdb: 34 00 00 00 00 00 00 00 00 00 read_pos
***0 wst__exec: op=2 (sense), buf=0xd1e2ec0, count=96 (0x60), parm=0x0
ioctl_op=0x5, to=30, datalen=0x60, buf=0xd1e2ec0
cdb: 03 00 00 00 60 00 sense, cnt=96
***0 wst__exec: rval=0, status.code/resid/checks=0x0/0x0/0x0
***0 wst__get_sense(int) cmd = 34, sense data:
70 00 03 00 00 00 00 58 00 00 00 00 53 00 36 00
00 00 00 00 00 02 20 20 20 20 20 20 00 20 00 00
00 00 1E 00 00 1C 62 1E 81 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 07 08 18 00 00 00 00 00 00
00 00 00 00 00 00 20 20 20 20 20 20 20 20 20 20
ec=0, sk=media err, asc=53, ascq=0
error is: unrecoverable error
flags: (none)
***0 wst__exec: rval=-1, status.code/resid/checks=0x20008111/0x0/0x0
***0 wst__dev_state: code=0x20008111
***0 wst__info: code=0x20008111
Error: getting dev info for Tape1 - unrecoverable error
***0 wst__conn_type returning 1 (code 0x0)
***0 wst__close: wh=0x0
Tape1:
Device type: tape
Model: [none]
Serial number: 1068037161
In service: yes
Automount: yes
Error rate: 8
Query frequency: [undetermined]
Debug mode: yes
Blocking factor: (default)
Max blocking factor: (default)
UUID: c60554ca-0562-1030-8cdb-d4ae528eb115
Attachment 1:
Host: bosmgmt.bos.local
Raw device: /dev/sg3
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-HH4
Firmware: B6W1
Serial number: 1068037161
Hardware compression: not available
Hardware encryption: not available
Thanks in advance

It's reporting a hardware media error on the drive. Basically you've got a hardware fault.
Thanks
Rich

I get a "Secure Connection Failed" error with google stating "certificate contains the same serial number"

When I click on a link for a google search, I get the "Secure Connection Failed" error in Firefox. It states, "Please contact the server administrator or email correspondent and give them the following information: Your certificate contains the same serial number as another certificate issued by the certificate authority."
I have followed the instructions here:
https://support.mozilla.org/en-US/kb/Certificate%20contains%20the%20same%20serial%20number%20as%20another%20certificate
and looked at this article:
https://support.mozilla.org/en-US/questions/1028103?esab=a&as=aaq
I have uninstalled and reinstalled Firefox, deleted the entire profiles folder, and reset Firefox. I see that the older (orphaned) article points to my router. However, I have a new router and have updated its software. There is no button to add an exception (as noted in the article), so I can't just bypass it. This problem does not occur with IE, so I have a hard time believing it is my router.
How do I troubleshoot this issue? I really don't want to change browsers.

Here is a screen shot of the error.

Cisco Show and Share Error: NetConnection.Connect.Failed

Hi
I installed Cisco DMM 5.2.0.25 and also CVP. I can able to view videos from the browser of certain PCs . But if i open the same link from another Laptop or PC( which are in same network and domain), I cant able to view the video. It shows an error "NetConnection.Connect.Failed". Am opening through Mozilla Firefox.
Prasanth Abraham

Hi Prasanth,
This looks to be an error of the flash plugin. Could you check if affected PCs have a supported version of Flash or of the Browser, as documented at:
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-565776_ps6682_Products_Data_Sheet.html
Mozilla Firefox 3.5.3 / 3.6.3
Adobe Flash v.10 recommended
Regards,
Marco

Flex/Zend channel connect failed error...

Hi guys.
    I am using Flex and php to develop my project. Everything works great in my local machine. However, when I upload my files to my server (godaddy.com). I got the error when loading my flex application.
The pop-up error message is
send failed
channel.connect.failed.error
Netconnection.call.Badversion: url:
http://mydomail/folder/gateway.php
I have upload my ZendFramewrok folder into my server and amf_config.ini has been configured. (webroot =http://mydomain)
I am not sure what's going on here. Please help. Thanks.
Update: my gateway.php
<?php
ini_set("display_errors", 1);
$dir = dirname(__FILE__);
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "$dir/amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library'; //I did upload the ZendFramwork folder
//Load ini file and locate zend directory
if(file_exists($configfile)) {
$arr=parse_ini_file($configfile,true);
if(isset($arr['zend']['webroot'])){
$webroot = $arr['zend']['webroot'];
$zenddir = $webroot. '/ZendFramework/library';
if(isset($arr['zend']['zend_path'])){
$zenddir = $arr['zend']['zend_path'];
// Setup include path
//add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
$dirs = $amf->directories->toArray();
foreach($dirs as $dir) {
     // get the first character of the path.
     // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
     $length = strlen($dir);
     $firstChar = $dir;
     if($length >= 1)
      $firstChar = $dir[0];
     if($firstChar != "/"){
      // if the directory is ./ path then we add the webroot only.
      if($dir == "./"){
       $server->addDirectory($webroot);
      }else{
       $tempPath = $webroot . "/" . $dir;
    $server->addDirectory($tempPath);
}else{
      $server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
$server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
$server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
Error from gateway.php if I call it directly.
Warning: require_once(Zend/Loader/Autoloader.php) [function.require-once]: failed to open stream: No such file or directory in /home/content/79/4687979/html/parkerList/gateway.php on line 27
Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.:/usr/local/php5/lib/php:http://blackwheels.info//ZendFramework/library') in /home/content/79/4687979/html/parkerList/gateway.php on line 27
gateway.php is the rat. but I still can't figure out what's wrong. Zend/Loader/Autoloader.php is under the server root "ZendFramework/library" folder. I don't understand why my application can't find it. Thanks again!

You will get a better response if you repost your question on the Flex forums. This forum is for the Livecycle Data Services product.

Netconnection.connect.failed

hi, all. i am a freshman in the flash media server. I write
the client with the flex, and the server is the flash media
server2, when i connect to the server, the test information tells
me the message: netconnection.connect.failed. but i write some
trace code in the server, the server log has shown them, i don't
know if i have connected the server, but when i connect to my
server with other's computer, it give me a error: Unhandled
NetStatusEvent:level=error, code=NetConnection.Connect.Failed
WebService/linkserver() at WebService/__btn1_click() at
[mouseEvent].
as follow the source code
the client:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import flash.net.*;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
import flash.net.NetConnection;
public function linkserver():void
nc = new NetConnection();
//nc.client;
nc.addEventListener("netStatus", test);
nc.connect("rtmp://localhost/firstApp","b");
public function test(event:NetStatusEvent):void
Alert.show(event.info.code);
<mx:Button id="button2" label="linkserver"
click="linkserver()" x="255" y="397"/>
</mx:Application>
server( main.asc)
application.onConnect=function(client,name){
if(name=="a"){
trace("rejectConnection");
application.rejectConnection(client, {msg:"server don't
let"+name+"connecting~"});
if(name=="b"){
trace("succeful");
this.acceptConnection(client);

You may have the app set to rtmp:/app or rtmp://localhost/app
but should be rtmp://public ip to server/app or
rtmpt://public ip to server:1935/app
Also firewalls and some antivirus or security programs make
stop the connection.
HTH

Suppress "Connection Failed" Error Messages on Client?

Hi there,
I have a Leopard server which is Managing Preferences for users in groups. In my Login Preference for a group, I have it basically "auto mounting" shares, such as smb://leopard-server/accounting and smb://leopard-server/graphics.
The works great so far. A user logs into their machine, managed prefs determines their group membership, and poof all the appropriate network drives show up on their desktop.
Problem is - when a user is off the network (for instance, at home with their laptop), after they power up and login they are immediately assailed with error messages, one for each failed connection to a network drive: "Connection failed. The server may not exist or it is not operational at this time".
Now it is understandable why Leopard is bringing up those error messages - it's trying it's best to connect to the network drive but the user isn't on the network.
Question is: is there any way to suppress these error messages and let the users who are off-network boot to their desktop "quietly"?
I know you can hold the Option key at login in order to turn off Managed Prefs altogether, but the problem with that is users tend to forget to turn Managed Prefs back on when they get back into the office.
Any ideas?

It's not just you, I am seeing this behaviour too.
Where 10.4 clients would fail silently, 10.5 is throwing the "Connection Failed" error message as you described.
I agree it is confusing to end users and would like a way to supress it, the only thing that springs to mind is manually mounting the share via a login hook that first checks network availability rather than using a WGM configured mount. Trouble is, to mount an afp share with the users credentials via a script is a whole new problem in itself.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Connection Failed errors freezing iDVD when trying to do Magic DVD feature

Whenever I try the Magic DVD feature lately (it used to work), iDVD freezes and I have to force quit. It repeatedly gives Connection Failed errors. But, strangely enough, if I simply make a new iDVD project (not through the Magic feature), it works just fine. I don't know of anything that I've done to cause this error. Tried messing with .plist files and don't want to do that again (seemed to cause bigger errors).

Hi
No not really any of them.
I suggested this to find out where the trouble resides.
• If the new account works. You solved an acute situation and the problem is most probably a
pref file.
=> Delete the one in first account or even re-install iLife
• If not - a more severe trouble shooting is of need
Yours Bengt W

Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

We are receiving a "Secure Connection Failed" error message when using Firefox Version 37.01. What is the remedy?

We have multiple websites that do not launch now as a result of the recent upgrade from Firefox version 36.04 to version 37.01. We received "Secure Connection Failed" error messages which indicate that the connection was interrupted while the page was loading, and that the page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please explain why this is happening, and if a fix will be issued soon by Mozilla, as everything was operating normally prior to the most recent Firefox upgrade. Alternatively, please identify browser settings that can/should be changed in order for Firefox to access these basic Internet sites (that are completely accessible using other browsers such as IE and Google Chrome). Thank you.

''rahuldecoded [[#answer-718441|said]]''
<blockquote>
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
</blockquote>
FYI, I work with the original poster. I looked at the suggestions on that page but none were the issue. Then I found this thread:
https://support.mozilla.org/en-US/questions/1056488
And that appears to be the problem we and others are having.

Getting VFS manager for client J2E_iom_D failed: Activity report (get open

Getting VFS manager for client J2E_iom_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error
I cannot sync with dtr and moreover the tracks which i deleted still shows up in DTR folder and i am not bale to delete it.
Please help....
George

NetWeaver Sneak ... SP 16: table PVC_ACTVERSVIEW missing i got answer from this.
Had to redeploy sda and it solved all probs .it was the prob with WAS...

Secure Connection Failed (Error code: sec_error_ca_cert_invalid)

Hello
I'm having troulbes accessing HP iLO with FF 36.0 on Ubuntu 14.04 LTS, getting the following error message:
====================================
Secure Connection Failed
An error occurred during a connection to 172.25.X.X. Issuer certificate is invalid. (Error code: sec_error_ca_cert_invalid)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
====================================
It seems to work with other browser such as Chromium, so the problem seems to be FF 36.0. Unfortunately, I don't have an "Add exception" button in FF that would allow me to bypass this warning.
I've already followed the following links:
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems
But I didn't managed to get it work. Any idea how to get it fixed?

I have a better answer, upgrade to version 37 via bug 1138332

FMS3 NetConnection.Connect.Failed

FMS3 NetConnection.Connect.Failed
I have two pc ,one have FMS+Apache ,the other have none.
I access from local (IP: 192.168.0.3),that is OK!
and I access from (IP: 192.168.0.4 ) ,the flashplayer
trace a error:NetConnection.Connect.Failed?
my app named "test" ,app path: "rtmp://192.168.0.3/test"
help !!

Is there a firewall on the FMS machine? If so, make sure port
1935 is open

Get More Info for NetConnection.Connect.Failed Error?

Similar Messages

Maybe you are looking for