Get-RDRemoteApp fails to find deployment
I have created a rds deployment as follows
3x Server 2012r2
RDSH01 (RemoteApp Host)
RDSGW01 (is actually running web access)
RDSBR01 (Broker)
I created it using the add role wizard and everything is currently working as expected.
When I run get-RDremoteapp I get the following message
Get-RDRemoteApp : A Remote Desktop Services deployment does not exist on RDSH01.domain.com. This operation can be
performed after creating a deployment. For information about creating a deployment, run "Get-Help
New-RDVirtualDesktopDeployment" or "Get-Help New-RDSessionDeployment".
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,Get-RDRemoteApp
I have tried running this remotely and directly on each of the 3 machines above, however I get the same error message.
Any suggestions?
Thank you for updating the result!
If you have any feedback on our support, please send to [email protected]
Similar Messages
-
When running the Lync 2013 Deployment wizard and running Step 2 Setup and Remove Lync Server Components, I get the following error "Failed to find SQL Service. Make sure that SQL Server Service (instance name LyncArchiving) is installed in machine
<machine name>. This also occurs for instance LyncMonitoring. After searching for a solution, it was suggested that it could be fixed by running the Topology Builder and unchecking the Archiving and Monitoring features. I did that and
then published the topology again. Got same error. Any suggestions?Ben,
I deployed Lync Standard Edition not Enterprise Edition. When I deployed the Front End pool, I selected to deploy it as a Standard Edition Server. I then inadvertently select the Archiving and Monitoring features. It does not give you the
option of using a seperate SQL server. I did not specify any other SQL server so the archiving and monitoring instances should have been created on my front end. Apparently they were not. The error messages I get are "Failed to find SQL Service. Make
sure that SQL Server service (instance name LyncArchiving) is installed in machine LyncFE1.micoen.local" and "Failed to find SQL Service. Make sure that SQL Server service (instance name LyncMonitoring)...". In the uninstall cmdlet I did reference
the instance name and server from the error message. The use of the -force switch did not help.
Tony -
Whenever I try to log in to my account or redeem gift cards, I get a message saying "Connection Manager Invoke Failed to find a service connection url". I changed my password, logged out and the same thing keeps happening. Does anyone have a solution for this?
Hello,
Try to go to the settings on your phone... Settings > Store > Click your Apple ID: And sign out from your account, then sign in again .... This solved the problem for me on my iPhone 4s -
I can't log on to my itunes account. Keep getting the error: "Connection Manager::invoke::Failed to find service connection url". What can I do?
Hi, Buster1932.
I would recommend logging out of your account then logging back in. If the issue persists, see the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
Cheers,
Jason H. -
the iPad is totally new to me. I can't seem to do anything with my Apple ID. As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error. It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url. Cancel or Retry. I have no idea what I'm doing wrong. Any help would be greatly appreciated.
I'd also love to know how to get rid of the old owner's name, which was Mike - I'm AnnWow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings..... -
ConnectionManager::invoke::Failed to find service connection url. I keep getting this error line I have just got my macbook pro back from repairs and a drive upgrade could this be the problem...?
Hey gasemp,
If you see that error I would sign out then sign back in to see if that resolves the issue:
Sign out
Choose Store > Sign Out.
Sign in using an Apple ID
Choose Store > Sign In, or click Sign In in the Quick Links section.
The Quick Links section is located in the right part of the window shown when you click Featured, Top Charts, or Categories in the toolbar.
Enter your Apple ID and password, and then click Sign In.
via:
Mac App Store: Sign in and out
http://support.apple.com/kb/PH11499
Sincerely,
David -
I have no problems in connecting to the appstore on my iphone or in iTunes. Just in the Appstore on my Macbook I get this message (ConnectionManager::invoke::Failed to find service connection url.)
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I just started getting "ConnectionManager::invoke::Failed to find service connection url" on my AppleTV 2nd Gen.
Only my AppleTV is having this problem. Our iPhones, MacBooks and iPad are all fine.
Signed out and back in serveral times, but no luck.
Apple TV SW Version 5.3
Googling around I see other folks having this problem, but I couldn't find a definitive solution posted anywhere.
Does anyone know of a solution to this issue?
Thanks in advance.Having the same issue. Updated with 5.3 recently and was fine for a few days, then randomly started and unable to load purchased movies. Restarted; and then Reset and loaded 5.3 again. Made no difference. Randomly works (i.e. can play a movie) but mostly not. Signed out of ITunes account and currently unable to sign in again. So no Apple TV Itunes Store services at all. Same ConnectionManager::invoke::Failed to find service connection url message appearing constantly. Assume 5.3 is at issue? Unsure how to resolve.
-
Frustrations with file permissions abound, as certain co workers are unable to manually determine their level of permission or who to ask to make changes to files and folders belonging to others. Users of Snow Leopard desktop OS get unhelpful feedback via Finder's Get Info, seeing only the permissions listed for "Everyone" and a statement that "You have custom access". The custom message exists, presumably, because ACL's are employed on the shared volume in an attempt to give managerial control over these volumes to specific users, even if all users can create files and folders on those volumes.
Shared volumes are partitions of an external RAID which are set up as sharepoints on a G5 tower running Server 10.4. Other persons in the office, using machines that are running desktop OS 10.5, can correctly see the assigned Owner and Group permissions (although the "custom access" still shows). This at least lets the 10.5 user know who created a given file or folder, so that they can resolve permissions-restricted issues if they come up (i.e. User A wants to delete file X, but as it was created by User B, A must contact B and have them delete it. In 10.6 it appears that A cannot determine who B is).
I know that ACL's are functioning (enabled on the drive) since we have been making use of ACL-granted write privileges for quite a while (and the custom access seems to be evidence too).
An error I encountered, pertaining to this, is that I used a 10.6 machine to create a working folder, then generated and saved several files in this location. Expected permissions thus would be Owner = me (i.e. the user I was logged in as), R/W, Group = staff, R only, Everyone = R only. However, immediately the permissions shown in Finder / Get Info consisted only of Everyone = R only, with no entry for Owner or Group. Moreover, clicking + to add either an Owner or a Group resulted in error message that I had entered an invalid user or group, even though I typed in correct info (such as trying to add "staff" as a group).Frustrations with file permissions abound, as certain co workers are unable to manually determine their level of permission or who to ask to make changes to files and folders belonging to others. Users of Snow Leopard desktop OS get unhelpful feedback via Finder's Get Info, seeing only the permissions listed for "Everyone" and a statement that "You have custom access". The custom message exists, presumably, because ACL's are employed on the shared volume in an attempt to give managerial control over these volumes to specific users, even if all users can create files and folders on those volumes.
Shared volumes are partitions of an external RAID which are set up as sharepoints on a G5 tower running Server 10.4. Other persons in the office, using machines that are running desktop OS 10.5, can correctly see the assigned Owner and Group permissions (although the "custom access" still shows). This at least lets the 10.5 user know who created a given file or folder, so that they can resolve permissions-restricted issues if they come up (i.e. User A wants to delete file X, but as it was created by User B, A must contact B and have them delete it. In 10.6 it appears that A cannot determine who B is).
I know that ACL's are functioning (enabled on the drive) since we have been making use of ACL-granted write privileges for quite a while (and the custom access seems to be evidence too).
An error I encountered, pertaining to this, is that I used a 10.6 machine to create a working folder, then generated and saved several files in this location. Expected permissions thus would be Owner = me (i.e. the user I was logged in as), R/W, Group = staff, R only, Everyone = R only. However, immediately the permissions shown in Finder / Get Info consisted only of Everyone = R only, with no entry for Owner or Group. Moreover, clicking + to add either an Owner or a Group resulted in error message that I had entered an invalid user or group, even though I typed in correct info (such as trying to add "staff" as a group). -
WL7: deploy fails to find configured TX DataSource
I don't understand why I'm getting the following exception at deployment
(external-stage):
weblogic.ejb20.WLDeploymentException: The DataSource with the JNDI name:
mysql-txdatasource-pool could not be located. Please ensure that the DataSource
has been deployed successfully and that the JNDI name in your EJB Deployment
descriptor is correct.
Here is an excerpt from my "config.xml" that shows the data sources and pools,
all of which I created in the admin console:
<JDBCConnectionPool ACLName="admin"
DriverName="org.gjt.mm.mysql.Driver" Name="mysql-pool"
Password="{3DES}jkpHRiRP/zU=" Properties="user=admin"
TestConnectionsOnRelease="true" TestConnectionsOnReserve="true"
TestTableName="Stuff" URL="jdbc:mysql://wondark/mysql" XAPassword="{3DES}jkpHRiRP/zU="/>
<JDBCDataSource JNDIName="mysql-datasource-pool"
Name="MySQL DataSource Pool" PoolName="mysql-pool"/>
<JDBCTxDataSource JNDIName="mysql-txdatasource-pool"
Name="MySQL Tx Data Source" PoolName="mysql-pool"/>
Does anyone have any idea why this could be happening, or something that I
could do to get more information?
I'm running on Win2k.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected]David,
I'd try to stop the server, add Targets="myserver" to the defintion
of the pool and datasource and then restart the server and look
at the shell console/server log for errors.
Regards,
Slava Imeshev
"David M. Karr" <[email protected]> wrote in message
news:[email protected]...
"Slava" == Slava Imeshev <[email protected]> writes:
Slava> Hi David,
Slava> Couple things about the pools and data sources defintion:
Slava> 1. Your pool and datasources just didn't start because a targetwas
Slava> not defined for them. Go to the console and add target to thepool
Slava> and then to the datasources.
In the "Targets" tab of the Pool, I put "myserver" in the "chosen" listand
clicked Apply, which produced the exception listing following this.
Exception
java.lang.NullPointerException
atweblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:11
53)
atweblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(Edit
MBeanAction.java:210)
atweblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(E
ditMBeanAction.java:188)
atweblogic.management.console.actions.internal.InternalActionContext.setAction
(InternalActionContext.java:158)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:170)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:945)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:332)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:242)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5363)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:721)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3043)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2466)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
--------------- nested within: ------------------
weblogic.utils.NestedRuntimeException - with nested exception:
[java.lang.NullPointerException]
atweblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:11
56)
atweblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(Edit
MBeanAction.java:210)
atweblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(E
ditMBeanAction.java:188)
atweblogic.management.console.actions.internal.InternalActionContext.setAction
(InternalActionContext.java:158)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:170)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:945)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:332)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:242)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5363)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:721)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3043)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2466)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
--------------- nested within: ------------------
weblogic.management.console.actions.ActionException - with nestedexception:
[weblogic.utils.NestedRuntimeException - with nested exception:
[java.lang.NullPointerException]]
at weblogic.management.console.actions.ErrorAction.(ErrorAction.java:38)
atweblogic.management.console.actions.internal.ActionServlet.doAction(ActionSe
rvlet.java:190)
atweblogic.management.console.actions.internal.ActionServlet.doPost(ActionServ
let.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Servle
tStubImpl.java:945)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:332)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:242)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(W
ebAppServletContext.java:5363)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManage
r.java:721)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:3043)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2466)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
Current Date
Fri Jun 28 14:43:09 PDT 2002
Console Release Build
null
Console Build
null
Server Release Build
7.0.0.0
Server Build
WebLogic Server 7.0 Thu Apr 25 17:16:22 PDT 2002 180709
All Server Product Versions
WebLogic Server 7.0 Thu Apr 25 17:16:22 PDT 2002 180709
WebLogic XMLX Module 7.0 Thu Apr 25 17:26:07 PDT 2002 180709
Request Info
Protocol: HTTP/1.1
ServerName: wondark
ServerPort: 7001
Secure: false
ContextPath: /console
ServletPath: /common/error.jsp
QueryString:MBean=mydomain%3AName%3Dmysql-pool%2CType%3DJDBCConnectionPool
PathInfo: null
PathTranslated: null
RequestURI: /console/common/error.jsp
AuthType: null
ContentType: application/x-www-form-urlencoded
CharacterEncoding: null
Locale: en_US
Method: POST
Session:weblogic.servlet.internal.session.MemorySessionData@2b3afd
RequestedSessionId:9cXpEaa7cV5TXFJnAUGfx5xKzjbhLrdqm9C7hZHST81m0xSXU2zq!-285718339!102530039338
5
RequestedSessionIdFromCookie: true
RequestedSessionIdFromURL: false
UserPrincipal: weblogic
RemoteUser: weblogic
RemoteAddr: 192.168.1.100
RemoteHost: wondark
Parameters
MBean = mydomain:Name=mysql-pool,Type=JDBCConnectionPool
chosen_wl_control_weblogic.management.configuration.JDBCConnectionPoolMBean.
Targets-Server = mydomain:Name=myserver,Type=Server
weblogic.console.submit_form = dataposted
wl_control_weblogic.management.configuration.JDBCConnectionPoolMBean.Targets
-Server = mydomain:Name=myserver,Type=Server
>
Attributes
wlinternalaction =weblogic.management.console.actions.internal.InternalActionContext@1740fa
java.util.Locale = en_US
weblogic.management.console.catalog.Catalog =weblogic.management.console.catalog.XmlCatalog@61c345
weblogic.management.console.helpers.BrowserHelper = User-Agent:Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.1a+) Gecko/20020625 IE:
false Netscape: true Supported: true JavscriptHrefs: true TableCellClick:
false DocumentReloadedOnResize: true DropdownStretchable: false
CellSpacingBlank: true EmptyCellBlank: true ImgOnclickSupported: false
TableBorderFancy: false PartialToWideTables: true DisabledControlSupported:
false
weblogic.management.console.helpers.DebugHelper =weblogic.management.console.helpers.DebugHelper@3fe222
weblogic.management.console.helpers.UnitsHelper =weblogic.management.console.helpers.UnitsHelper@5e6a4f
weblogic.management.console.helpers.UrlHelper =weblogic.management.console.helpers.UrlHelper@2b0523
>
Headers
Accept =text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=
0.8,video/x-mng,image/png,image/jpeg,image/gif;q=0.2,text/css,*/*;q=0.1
Accept-Charset = ISO-8859-1, utf-8;q=0.66, *;q=0.66
Accept-Encoding = gzip, deflate, compress;q=0.9
Accept-Language = en-us, en;q=0.50
Connection = keep-alive
Content-Length = 300
Content-Type = application/x-www-form-urlencoded
Cookie =ADMINCONSOLESESSION=9cXpEaa7cV5TXFJnAUGfx5xKzjbhLrdqm9C7hZHST81m0xSXU2zq!-28
5718339
Host = wondark:7001
Keep-Alive = 300
Referer =http://wondark:7001/console/actions/mbean/EditMBeanAction?reloadNav=false&ta
b=targets&MBean=mydomain%3AName%3Dmysql-pool%2CType%3DJDBCConnectionPool
User-Agent = Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.1a+)Gecko/20020625
>
BrowserInfo
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US;rv:1.1a+) Gecko/20020625
IE: false
Netscape: true
Supported: true
JavscriptHrefs: true
TableCellClick: false
DocumentReloadedOnResize: true
DropdownStretchable: false
CellSpacingBlank: true
EmptyCellBlank: true
ImgOnclickSupported: false
TableBorderFancy: false
PartialToWideTables: true
DisabledControlSupported: false
Errors occurred while processing your request.
===================================================================
David M. Karr ; Java/J2EE/XML/Unix/C++
[email protected] -
Offline Servicing of OS fails (failed to find properties of file 5)
Hi,
I'm unable to get the Offline Update Servicing of the OS to work. In the OfflineServicingMgr.log I Keep getting:
Failed to get update applicability. Dism.exe command line is below:"C:\Windows\system32\cmd.exe" /q /c ""D:\Microsoft\Windows Kits\8.1\Assessment and Deployment Kit\Deployment Tools\amd64\DISM\dism.exe" /Image:"D:\ConfigMgr_OfflineImageServicing\I0100042\ImageMountDir" /LogPath:%WINDIR%\Logs\Dism\dism_sccmAMD64.log /English /Get-PackageInfo /Packagepath:"D:\ConfigMgr_OfflineImageServicing\fc1721b9-7ee8-44a6-9842-b7d89596f126\KB2890660.cab">>D:\ConfigMgr_OfflineImageServicing\I0100042\[email protected]"
after this happened 5 times I get the following:
Failed to find properties of file 5
UnMounting Image (Commit Changes = 0) ...
Completed processing image package I0100042. Status = Failed
I also checked the dism_sccmAMD64.log but can't find a solution to this Problem, there are to much Errors in there.
dism_sccmAMD64.log:
2014-08-27 10:34:49, Info DPX Started DPX phase: Apply Deltas Provided In File
2014-08-27 10:34:49, Info DPX File could not be expanded, Source=update.mum, Target=(null), status=0x80070002
2014-08-27 10:34:49, Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab
2014-08-27 10:34:49, Info DPX Ended DPX phase: Apply Deltas Provided In File
2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020102
2014-08-27 10:34:49, Info DPX Ended DPX phase: Resume and Download Job
2014-08-27 10:34:49, Info DPX DpxException hr=0x80070002 code=0x020217
2014-08-27 10:34:49, Info CBS Failed to extract file update.mum from cabinet \\?\D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Info CBS Failed to extract package manifest from cabinet [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Info CBS Failed to initialize internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Error CBS Failed to create internal package [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to open the package at location: "D:\ConfigMgr_OfflineImageServicing\7e1f745c-af8b-47a6-a3e0-41288d29c831\Windows8.1-KB2898464-x64.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed to get the list of packages from the command line. - CPackageManagerCLIHandler::ProcessCmdLine_GetPackageInfo(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM Package Manager: PID=7840 TID=31584 Failed while processing command get-packageinfo. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2014-08-27 10:34:49, Error DISM DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Found the PE Provider. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2014-08-27 10:34:49, Info DISM DISM Provider Store: PID=7840 TID=31584 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SOFTWARE, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SYSTEM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SECURITY, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/SAM, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/COMPONENTS, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/System32/config/DEFAULT, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat
2014-08-27 10:34:49, Info CBS Failed to unload offline registry: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Users/default/ntuser.dat, the client may still need it open. [HRESULT = 0x80070005 - E_ACCESSDENIED]
2014-08-27 10:34:49, Info CBS Unloading offline registry hive: {bf1a281b-ad7b-4476-ac95-f47682990ce7}D:/ConfigMgr_OfflineImageServicing/I0100042/ImageMountDir/Windows/system32/smi/store/Machine/schema.datRight before, the error you mentioned, I see a couple of file not found message. You might want to check those, still it can be anything from a file that doesn't exist till too little disk space.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM 612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Failed to unlock deployment list
Hi guys!
I need help because when I run a workflow that call several mappings, it stops in the middle of one of the mappings, looks like it ended up successfully (all green, 0 errors in the log). I have no log file in the $OWB_HOME/owb/log folder, and the only error message I can find is in the xterm where I launched OWB client :
doAsynchronousExecution
Task notification null PRC_DMT_MAIN
Execute operation NativeExecution OWF_BIDEALERS_LOCATION PRC_DMT_MAIN
Task notification null PRC_DMT_MAIN:MPG_DIM_SOCIETE_SITE_MARQUE
Task notification OK PRC_DMT_MAIN
Execute operation NativeExecution OWF_BIDEALERS_LOCATION PRC_DMT_MAIN
Task notification OK PRC_DMT_MAIN:MPG_DIM_DMT_TEMPS
Task notification OK PRC_DMT_MAIN:MPG_DIM_SOCIETE_SITE_MARQUE
Task notification OK PRC_DMT_MAIN:MPG_DIM_DMT_TEMPS
Failed to unlock deployment list
Failed to unlock deployment list
PRC_DMT_MAIN is my workflow, and all the MPG are the mappings is calls. Several are missing.
A bit more about the context :
- we have a dev. environment running on windows server and everything is fine,
- we have a test environment running on linux SLES where I have this issue,
- we have written an OMB*Plus script to perform the erport/import/deployment and it has run perfectly so far,
- we already have been through the OS-specific problems (folder separator, case sensitiveness, ...)
I googled the error message "Failed to unlock deployment list" but didn't get anything helpful.
Can anybody please advise?
Thanks in advance!
Ced.Nigel,
My fault, on the log : I renamed the log file, expecting OWB to create a new one but everything was actually logged in the renamed file.
My client is working on the server. I use putty and XMing to get it displayed on my PC.
I did not try with today delta load, but with the Monday full load, to run each part separately. It allowed me to complete the process. Thus it's not the workflow contents that fails.
One weird thing is in the log file today. I have to explain a bit more:
Both full and delta workflow contain 1 workflow for each layer (ODS, DWH, DMT) the difference is the DWH workflow that is not exactly the same. The two DWH workflows and the DMT workflow all call some mappings and also call a set of workflows.
The strange thing is that the delta didn't reach the end of the ODS. The DWH and DMT weren't even started. But the log file reports a start of the DMT workflow called by the delta workflow at the same time as the ODS. The DWH isn't started, while the main workflow sequentially calls ODS, DWH and then DMT.
The funny thing is that the DMT seems to run ( while it is not supposed to ) and to stop at the same place as in the full : I have a log for the same 2 DMT mappings.
I believe that there is something somewhere that remains from former executions and that is re-executed for some reason.
I also think that if my delta stops, it is not due to the ODS, but due to the fact that this ghost DMT session that runs in parallel says "stop" to the whole process while the ODS is running.
2008/07/02-15:15:19-CEST 1DE0C09 Initializing execution for auditId= 227186 parentAuditId= 227181 topLevelAuditId=227181 taskName=PRC_SCH_DELTA:PRC_ODS_MAIN
2008/07/02-15:15:19-CEST 1F2F70A Initializing execution for auditId= 227205 parentAuditId= 227181 topLevelAuditId=227181 taskName=PRC_SCH_DELTA:PRC_DMT_MAIN
Finally, I think that the issue isn't in the workflows themselves as the same issue happens on 2 different workflows.
Can you please advise?
Thanks for your help so far!
Ced.
Unfortunately I can't go any further : -
Sccm boot from thumb drive - failed to find task sequence.
The computer should be generating its own netbios name when booting but what is happening when booting from
the SCCM 2012 thumb drive FAILED TO FIND TASK SEQUENCE to grab image off of network drive.
When I real the SMSTS.log file it is getting its name pulling names off of computers that are in AD.
ALERT ALERT! ALERT!Run this query for the MAC and see if there are any results. Could be that the MAC is assigned to a machine already and you either need to deploy the OS to a collection and add that machine to the collection, or it is possible the GUID is duplicated.
select SYS.netbios_name0, SD.itemkey, MAC.MAC_Addresses0, SD.SMS_Unique_Identifier0,SD.Hardware_ID0,SD.Name0,SD.Unknown0,SD.Obsolete0,SD.Active0,SD.Decommissioned0,SD.Creation_Date0,SD.SMBIOS_GUID0
from System_DISC SD FULL JOIN
v_r_system SYS ON SD.itemkey = SYS.resourceid FULL JOIN
System_MAC_Addres_ARR MAC ON SD.itemkey = MAC.ItemKey
--where SD.Unknown0 = 1
where MAC_Addresses0 = '%:AD:D5'
--OR SD.SMBIOS_GUID0 = '' -
Task Sequence Error - Failed to find CCM_SoftwareDistribution object (0x80040104)
Hi, we recently migrated packages and a DP to SCCM2012. now, when we checked OS Deployment, the TS fails with error Code 0x80040104. . it has errors with a driver package.
I Already updated the DP, i also deleted it on all DPs and resend it.. no luck.
Someone a clue. in the forum i saw an entry about a corrupt driver package.. but no further infos or a link.SMSTS.LOG
Adding URL location item 2 2 00000374 00000001 http://HAMI0372.Global.BDFGroup.net/SMS_DP_SMSPKG$/BSS000B2 TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
Prioritized locations: TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
http://HAMI0372.Global.BDFGroup.net/SMS_DP_SMSPKG$/BSS000B2 TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
BSS000B2 content location: TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
BSS000B2 http content location: http://HAMI0372.Global.BDFGroup.net/SMS_DP_SMSPKG$/BSS000B2 TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
Getting policy for CCM_SoftwareDistribution[AdvertID="BDF20002", PackageID="BSS000DE", ProgramID="*"] TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
FALSE, HRESULT=80040104 (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,2506) TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
Failed to find CCM_SoftwareDistribution object for AdvertID="BDF20002", PackageID="BSS000DE", ProgramID="*" TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
(*iTSReference)->Resolve( pTSPolicyManager, dwResolveFlags ), HRESULT=80040104 (e:\nts_sccm_release\sms\framework\tscore\tspolicy.cpp,3341) TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
m_pSelectedTaskSequence->Resolve( m_pPolicyManager, TS::Policy::TaskSequence::ResolvePolicy | TS::Policy::TaskSequence::ResolveSource, fpCallbackProc, pv, hCancelEvent), HRESULT=80040104 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1480)
TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
Failed to resolve selected task sequence dependencies. Code(0x80040104) TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
hrReturn, HRESULT=80040104 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediaresolveprogresspage.cpp,408) TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
ThreadToResolveAndExecuteTaskSequence failed. Code(0x80040104) TSMBootstrap 20.07.2012 09:02:29 1356 (0x054C)
ThreadToResolveAndExecuteTaskSequence returned code 0x80040104 TSMBootstrap 20.07.2012 09:02:29 1216 (0x04C0)
Setting wizard error: This task sequence cannot be run because a package referenced by the task sequence could not be found. For more information, contact your system administrator or helpdesk operator. TSMBootstrap 20.07.2012
09:02:29 1216 (0x04C0)
ResolveProgressPage::OnWizardNext() TSMBootstrap 20.07.2012 09:02:29 1216 (0x04C0)
Activating Finish Page. TSMBootstrap 20.07.2012 09:02:29 1216 (0x04C0)
Loading bitmap TSMBootstrap 20.07.2012 09:02:29 1216 (0x04C0)
Executing command line: X:\windows\system32\cmd.exe /k TSBootShell 20.07.2012 09:02:30 804 (0x0324)
The command completed successfully. TSBootShell 20.07.2012 09:02:30 804 (0x0324)
Successfully launched command shell. TSBootShell 20.07.2012 09:02:30 804 (0x0324)
Exiting task sequence wizard. TSMBootstrap 20.07.2012 09:11:59 1216 (0x04C0)
Exiting with return code 0x00000000 TSMBootstrap 20.07.2012 09:11:59 1216 (0x04C0)
Execution complete. TSBootShell 20.07.2012 09:11:59 828 (0x033C)
Finalizing logging from process 800 TSBootShell 20.07.2012 09:11:59 828 (0x033C)
Finalizing logs to root of first available drive TSBootShell 20.07.2012 09:11:59 828 (0x033C)
Successfully finalized logs to C:\SMSTSLog TSBootShell 20.07.2012 09:11:59 828 (0x033C)
Cleaning up task sequencing logging configuration. TSBootShell 20.07.2012 09:11:59 828 (0x033C)
Maybe you are looking for
-
All ipod music missing but still can be seen in iTunes
HELP! Equipment: iPod 60GB Photo running Windows XP (SP2) platform via USB I'm a first time user experiencing update problems. I've already loaded 7,000 twice via auto-sync then manually the second time. The first time I my music disappeared I bit th
-
Yahoo Mail account can only see certain subfolders, not main inbox
Can anyone please help? I've been on the phone with Apple tech support for 2 hours. I have a Yahoo Plus mail account that I've had for about 8 years. I've had my iPhone for a week now and have had no problems receiving or sending mail from my Yahoo a
-
Safari Slow to startup, wrong fonts, crashes after loading apple page
I'm running Safari 2.0.2 on a new Mac Mini, OS 110.4.3. I was doing several things when it started to quit working; running quicktime movies, running Azureus (not too well configured) and adding a CD's worth of fonts to Fontbook I started seeing perf
-
Display Dataset field Value in the footer based on the Group
Hi Guys, My current SSRS report is displaying multiple projects data. One Project data is rendering into 1 or 2 pages based on the project specific data. Now, the requirement here is to display the "ProjectName" in the footer of the SSRS report in be
-
Is there some way for me to write to a file using JavaScript in LiveCycle
Hi there, Our client has a requirement to be able to print off all validation messages from a partially completed e-form. What I would like to do it create a text string and write it to a file so that the user can print it off. Is this possible to d