Getting error ERROR (OVSCommons:142) catch_error: /etc/monitor/config.yml

While trying to create a Server Pool, I get this error
[2011-09-09 17:19:34 19523] ERROR (OVSCommons:142) catch_error: [Errno 2] No such file or directory: '/etc/monitor/config.yml'
Traceback (most recent call last):
File "/opt/ovs-agent-3.0/OVSCommons.py", line 140, in wrapper
return func(*args)
File "/opt/ovs-agent-3.0/OVSServerPool.py", line 189, in create_server_pool
node_number, server_hostname, server_ip, roles, initial=True)
File "/opt/ovs-agent-3.0/OVSServerPool.py", line 150, in pool_add_server
write_config(pool_uuid, server_id)
File "/opt/ovs-agent-3.0/OVSStat.py", line 100, in write_config
fd = open(MONITOR_CFG, 'r')
IOError: [Errno 2] No such file or directory: '/etc/monitor/config.yml'
I see this file out out in /etc/monitor
config.yml.save
But not the other....Is there some doc that tells me how to fix this?
Edited by: user594687 on Sep 9, 2011 5:41 PM

user594687 wrote:
config.yml.save
But not the other....Is there some doc that tells me how to fix this?Is it perhaps config.yml.rpmsave? If so, just rename it back to config.yml. If you upgraded from a pre-release version of Oracle VM 3.0, this may have caused the file to be renamed by the upgrade process. Otherwise, just reinstall the entire server from the 3.0.1 ISO image.

Similar Messages

  • HT201413 iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    iphone 3gs is dead and not responding for DFU restore also. getting errors like 1600,1601 etc., any help?

    Mikey, I have the exact same problem. Dropped my 3gs on Thanksgiving, phone was not responsive, plugged into the wall charger, went to grey iPhone restore screen, then said to connect to itunes. So I plugged it into itunes but itunes wont recognize it nor will my computer. I searched the internet for hours with no success. I tried to change USB ports and cords, tired removing the SIM card, reinstalled itunes, everything. When I put it in DFU mode itunes recognizes an iphone in recovery mode, so I click restore and update, then I get error 1602 every time. My iPhone also loses power when I unplug it from the wall. I do not know what to try next. You are the only person I have found with the same exact problem I have. I will update you if I find a way to get my phone working again and I hope you will do the same. I'm very frustrated

  • I can't get Adobe Flash to work on FF 25. Have downloaded and installed AF, but still get error message at Pandora, etc.

    I'm using FF25 on Windows 7. When I go to Pandora and Grooveshark I get error messages telling me I need to install a newer version of Flash (v.10 or later). I've downloaded and installed (I think) Flash repeatedly, but I still get that error message. (Btw, I got the same message with IE, but I installed Flash for that and everything's fine.) I read somewhere that I needed to download the latest version of Real Player in order for Flash to work. I did that but get the same error messages. I am not tech savvy and not sure what to do now.

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back soon.
    Please try deleting the <code>pluginreg.dat</code> file located inside of your Firefox profile.

  • Getting error while clicking on System Monitoring

    Dear All,
    I have confirgured EWA in Solution Manager 4.0 for ECC6.0 Servers. EWA is getting generated without any issue. I have to monitor the Satellite Systems from Solution manager, so when i tried to click System Monitoring/Administration, it is giving error as  "http://solman.srhouse.com:8001/sap/bc/solman/defaultUser/graphic/solmangraphic.htm call was terminated because the corresponding service is not available.".
    ErrorCode:ICF-NF-http-c:009-u:SOLARSERVICE-l:E-i:solman_ESM_01-v:0-s:404-r:NoExtensionFound
    If any one has come across this issue, please help to resolve this issue.
    Thanks & Regards,
    Ranjith Kumar D

    Hello Ranjith,
    Your Portal service is may not running.
    Logon with <sid>adm and start jcmon and check if all server processes are up and running.
    If jcmon is properly running, then try using the following link and check what happens.
    http://solman.srhouse.com:8001/sap/bc/gui/sap/its/webgui/!
    The above url pattern is from integrated ITS server, for this to work you should maintain FQDN - fully qualified domain name.
    The url should be
    http://<host>.<domain>.com:<port>/sap/bc/gui......
    how to do this?
    check this WIKI
    https://wiki.sdn.sap.com/wiki/display/BSP/FullyQualifiedDomainName%28FQDN%29
    also, uncheck the "show friendly error messages" check box from the browsers tools->internet options->advanced tab to get more details error messages thrown by the server instead of just "the page cannot be displayed"
    And also make sure that you have activated the services, virtual_host, sap , bc, gui, sap, its , in transaction SICF and also did you publish SYSTEM and WEBGUI services to site INTERNAL.
    for more info check this weblog.
    Running your first  ITS WebGUI application in SAP NetWeaver 04 ABAP Edition - NSP
    Hope the above info is helpful.
    Regards,
    Satish.

  • Get error 10240 in labview 6i Evaluation when I run my VI's from lv5.1

    I want to run my VI's - created in Labview 5.1 - in Labview 6i Eval.The device PCI 6024E is detected in MAX, but I get "Error-10240 occurred at AI Group Config
    Possible reasons:NI-DAQLV: The driver interface could not locate or open the driver".
    Ni-Daq version 6.9
    Operating System: Windows 98
    CPU: Pentium
    RAM: 64 MB
    The test examples work with the device.

    Hello,
    I think you posted your question in the wrong forum...this forum is for questions pertaining to the National Instruments product "Measure for Windows". In order to get the maximum exposure to an appropriate audience for your question, I recommend you post in the Measurement Hardware >> Multifunction I/O category.
    Nevertheless, I will venture a guess as to why you are seeing this problem. If you brought your VIs over to LabVIEW 6i in an LLB, then you may have saved all the DAQ VIs (AI Config, AI Start, etc.) into that LLB. You should not have done that. LabVIEW needs to use its own copies of the DAQ VIs (in the vi.lib folder), not the ones in your LLB. There is a utility on the NI website that will go through an LLB and remove any vi.lib VIs from
    that LLB...you should use this tool on your LLB, then re-load your VIs. I searched ni.com for "removing vi.lib" (without the quotes) and it was the first link that came up in the search results. After using this tool, your VI will then link to the DAQ subVIs in vi.lib and I imagine it will run without errors at that point.
    If this suggestion does not help, you will probably get the best suggestions from the aforementioned Multifunction I/O forum.
    Good luck, and have a nice day.
    Darren
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my

    hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc).  Any ideas?

    Was able to download and install Premier but can't install Photoshop Elements - getting multiple error messages (pirated software, etc).  Any ideas?

    download from adobe.com or prodesigntools.com.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Getting "line disconnected" error message when trying to monitor

    Getting "line disconnected" error message when trying to monitor "live stream" on cameras from computer.  Anyone else have this issue?  Any suggestions on how to fix?  I have reconfigured each camera with the router but still having the error message.  I have a total of three cameras....(1) is wired and (2) are wifi......I am getting this message with all cameras (both wired/wifi).

    Is this an intermittent error that you get now and then, or were you able to successfully setup your cameras, then one day you got the "line disconnected" on all cameras since that point and on?
    If this is an intermittent problem, I can share that I experienced the same thing the first two days of having setup my cameras.  It seemed that my Gateway was communicating with the Verizon servers pretty heavily as I was getting my HMC first setup.  However, starting on day three and on, it has worked very well.
    The only odd thing I'm experiencing now is that I getting several "camera_detected" messages in the activity logs.  All my cameras show up in the My Devices list, and I can view them either as a snapshot or as live streaming, however, the log makes it seem that there is a mystery camera connected somewhere that I don't know about.  I have a call in to Verizon regarding this and hopefully will get an answer in the next couple of days.  It's not hurting anything, just kind of annoying to sort through those entries as you're going through your Activity Log.

  • I just upgraded my iPhone 4 software to iOS 5.0.1 and I keep getting error -35 and it will not let me sync any apps, movies etc.

    I just upgraded my iPhone 4 software to iOS 5.0.1 and I keep getting error -35 and it will not let me sync any apps, movies etc.

    I had the same issue.  I closed iTunes, restarted the computer and then tried again. This time it would sync.  Another thing I tried was switching USB ports I was connecting through.

  • I had a Verizon tech set my ports etc however like others we keep getting Error 0X800CCC7D

    I had a Verizon tech set my ports etc however like others we keep getting Error 0X800CCC7D. I called Verizon Support and they doubled checked my settings, that they set up, and we still Error 0X800CCC7D after 5 or 6 emails.
    I went to Microsoft's Forums and they pretty much say the same thing about Error 0X800CCC7D and that the only thing left that can be wrong is the ISP has some thing wrong, there are NO more options for the clients to do.
    Verizon told us they are doing away with the Yahoo accounts and connections and now have their own email program that I have accessed. However before this we did not get Error 0X800CCC7D.

    I am not sure how to make a image of my settings, I wrote them down as the Tech changed them.
    We took out Yahoo in both our incoming and outgoing entries so they read
    incoming.verizon.net
    outgoing.verizon.net
    The ports are now 995 and 465, below I have posted what I watched the Tech change to. We can test our email Accounts with Outlook 2003 and they will send and receive immediately in the test.
    However when we actually go to send something nearly every first time or two the sending hangs up for 5 minutes. Then we get the error message 0x800ccc7d.
    I have been minimizing the sending box and going on with business and eventually it sends the email, email size does not matter, then it is followed with the error message 0x800ccc7d. Microsoft's forum believes the server is not set correctly for smpt accounts with SSL security settings. That is why I contacted Verizon, who have been helpful and checked out their own settings, however neither of us has pin pointed the issue or solution.
    Mail server settings
    Incoming mail server (POP3): pop.verizon.net
    IncomingServerPort Numbers: 995
    Outgoing mail server (SMTP): smtp.verizon.net
    Outgoing ServerPort Numbers: 465  
    Your Verizon Online user name
    Your Verizon Online password
    Make sure "This server requires a secure connection (SSL)" is checked.

  • Tried to download ios 7. Connected to i-tunes and wants to restore my phone - says its in recovery mode. No other options available. Goes near to success then always get error code 29. Have tried to re-set my security software etc.

    My iPhone is now dead. Downloaded ios 7 by wifi on the phone. It then asked me to connect to i-tunes. I-tunes says the phone must be restored. Goes a long way down the restore and then get error code 29. I have tried turning off security software and firewalls as suggested by the Apple site but no difference. Can anyone help?

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

  • While activating a request in DSO getting error code 10

    While activating a request in DSO getting error code 10
    Hi All,
    I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
    Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
    I have checked the formula in Transformation and it works fine. Still I am not able to load data.
    Please help.
    Thanks and regards
    Vishal Pardeshi

    Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
    Otherwise you can check the error from the monitor screen of the request in Details tab.
    Veerendra.

  • Has anybody gotten this popup error message: ASI Eve CL Monitor has encountered a problem and needs to close

    Has anybody received this error message: ASI Eve CL Monitor has encountered a problem and need to close?
    == This happened ==
    Every time Firefox opened
    == Don't know

    I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
    In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

  • I keep getting error code 4450 when I'm trying to burn a CD from itunes.  It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

    i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!),  Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
    -I've slowed down the burn as slow as it can go
    -I have bought 3 different brands of cd's
    -i have the latest version of iTunes.
    Can someone help me?

    I have Windows 7 on a Dell.  Open and play iTunes in the compatability mode and use Windows XP (service pack 2).  Disregard any messsages to disable the compability mode.  This has worked for me.  I have also reinstalled iTunes and played with burn speeds etc.  These ideas did not work.  Compatability mode works.

  • TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

    I cannot open itunes.  Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
    What do I need to do so I dont lose all my loaded music, etc.?
    Thanks

    If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
    Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
    Not sure if the following site/link will tell the method...
    •Apple - Support - iTunes - install & update:
    http://www.apple.com/support/itunes/install/
    •Troubleshooting iTunes installation on Mac OS X:
    http://support.apple.com/kb/HT2311
    Good luck & happy computing!
    ps: i see you resolved this issue. it's magic!

Maybe you are looking for

  • A Database who is not Citadel

    Hi, I am using LabVIEW 8.2.1 RT DSC. I would like to store some measurements results (analog continuous measurements), in a "regular" database (not Citadel). Since I am a bit familiar with SQL, I have Purchased SQL connectivity toolkit. and I have se

  • Deployment of upgraded site from staging to production - error when trying to access "Content and Structure"

    Hi, We recently upgraded a site from SP 2010 to SP 2013. For moving to production, I copied over the content database to production and used the following command to to make the content database accessible in production: Mount-SPContentDatabase -Name

  • Mappings Result to Null

    Hello everyone. I have a strange situation. Some times I have unfinished flows. The reason seems to be that some mappings (not specific ones) have status complete, start time and finished time the same and result null. After all my mappings I check f

  • Bluetooth losed connection to Audible app

    I have a Jawbone Icon, which I have updated with the A2DP functions. I used it with my iPhone 3G and rarely had a problem with the connection. The iPhone 4 seems much more tempermental. The Icon always connects with the phone, but not with other apps

  • Tiger Fax Server

    I have an old Blue & White that I have upgraded to a G4 processor. I would like to put it on my home network as a headless server for storing files and to use as a fax server.  My network is composed of cat 5E & 6 cabling with two time capsules (two