Getting error when submitting new Add-on - "This name is already in use. Please choose another."

Trying to submit a new add-on for my App. The name is "Springpad Clipper" and when uploading the file I get the error "This name is already in use. Please choose another."
We do currently have an add-on called "Springpad" but the name (both in the manifest file and the display name) are different.
Any help you could provide would be great, we're trying to upload this ASAP. Our developer account is under the name "Springpad"

The Addons .Mozilla .Org support forum is over here: <br ./>
https://forums.mozilla.org/addons/
We do support here for the Firefox web browser.

Similar Messages

  • System Center Virtual Machine Manager SC VMM 2012 SP1 Installation fails: Unable to assign the name NO_PARAM to this host because this name is already in use.

    I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
    the scenario is as follows,
    Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
    Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
    installed ADK
    specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
    use.
    please help

    I had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
    computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
    the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
    files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
    the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
    key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
    it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server.

  • Get an error message when trying to do back up to time capsule: This record is already in use please try again, get an error message when trying to do back up to time capsule: This record is already in use please try again

    Cannot do back up with time capsule.
    I get an error message sayng that this disc is already in use. I have tried to wipe and restart but to no avail.
    What could be wrong?

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup again

  • Getting error when trying to add authorzation in ERM (AC 5.3_SP,)

    Hi Experts,
    I have created a role in ERM and successfully saved it, when trying to add authorization by selecting the functional area->selected the functional are(procurement dept.) -> next i clicked on the authorization data-> aded one row ->when searching for the function id from the description field, it's searching for some time and after that, getting the follwing error .
    "Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://xiserver.ep.in:50000/VirsaCCFunction5_0Service/Config1?wsdl&style=document"
    Please do help.
    Best Reagrds,
    Gurugobinda
    Edited by: gurugobinda harichandan parida on Sep 10, 2009 6:29 PM

    Hi Alpesh and Zaher,
    Thanks a lot for all your help and support.
    After applying the note 1279722 my error got resolved, but after that when I am going to the next step to maintain PFCG it is giving me the error as: "Unhandled error; Function template PRGN_CHECK_ROLE_EXISTScould not be retrieved from CPD".
    Please do suggest.
    Regards,
    Gurugobinda

  • Getting error when i am giving the server name in JDBC

    Hi All,
    When i am trying to connect to JDBC then i am getting the error in Servername
    {color:#3366ff}********************INPUT OF Testing.java************************
    package com.fidelity.ereview.utils;{color}
    {color:#3366ff}import java.io.*;
    import java.sql.*;{color}
    {color:#3366ff}public class Testing {
    public static void main(String[] args) throws SQLException {{color}
    {color:#3366ff} Connection con;
    SQLServerDataSource ds = new SQLServerDataSource();
    ds.setServerName("01HW059726\SQL2K5"); {color:#ff0000}//here getting error{color}
    ds.setPortNumber(1433);
    ds.setUser("eReview");
    ds.setPassword("Password123");
    ds.setDatabaseName("migration");
    con = ds.getConnection();
    if (con != null) {
    System.out.println("Successfully connected");
    else
    System.out.println("Not Successfully connected");
    Kindly anybody tell me that how shell i give the server name (My server name is :01HW059726\SQL2K5) in the
    ds.setServerName???{color}

    Replace \ in server name with \\ like
    01HW059726*{color:#ff0000}\\{color}*SQL2K5

  • Getting "Read timed out" error when submitting new podcast

    http://www.therpghaven.com/podcast/?feed=podcast
    My feed is validated. I've checked it against the example feed and it seems fine. I can subscribe directly from within iTunes and it looks fine, downloads the first episode.
    I saw that there was maintenance last night. Is it possible this isn't my fault?
    If it is, any clues would be a great help!
    Thanks

    I'm using WordPress with the Podcasting plug-in, which I have admin access to. That's what generates the feed. But according to the developers, the feed is not actually a file, but something dynamically generated by WordPress when it is called. When you say "actual file" do you mean the podcast itself? Or the feed?
    I'm not familiar with WordPress: possibly what they mean is that a process takes place on the server each time a request is received for the feed: if this is so then you can't change that. By 'actual file' I did mean the feed - most systems produce an .xml file and it is that which is submitted to iTunes.
    As to log-in, normally the iTunes Store effectively keeps you logged in: I assume you would need to have cookies enabled - is this the case?

  • Getting error when submitting form using IE but not when using FF

    Error: Error #2101: The String passed to URLVariables.decode() must be a URL-encoded query string containing name/value pairs.
        at Error$/throwError()
        at flash.net::URLVariables/decode()
        at flash.net::URLVariables()
        at flash.net::URLLoader/onComplete()
    Has anyone had this problem?

    I don't know how I would test that I don't know of any way to test it locally.
    here's the code for the form:
    import flash.net.*;
    import flash.events.*;
    import flash.text.TextField;
        var status_txt:TextField = new TextField();
        var myFormat:TextFormat = new TextFormat();
        myFormat.font = "Georga";
        myFormat.color = 0x00ff00;
        myFormat.size = 21;
        status_txt.autoSize = TextFieldAutoSize.LEFT;
        status_txt.x = -240;
        status_txt.y = -225;
        addChild(status_txt);
    submit_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
    stage.addEventListener(KeyboardEvent.KEY_DOWN, reportKeyDown);
    //this.status_txt.mouseEnabled = false;
    //this.parent.mouseEnabled = true;
    function reportKeyDown(e:KeyboardEvent):void {
        var KeyCode:uint = e.charCode;
        if (KeyCode == 13){
            submit_btn.dispatchEvent(new MouseEvent(MouseEvent.CLICK));
    function ValidateAndSend(e:MouseEvent):void {
    var variables:URLVariables = new URLVariables();
    var request:URLRequest = new URLRequest();
    // variables.recipient = "[email protected]";
    if(!name_input.length){    createStatus("please enter a name"); }
    else if(!email_input.length) {createStatus("please enter a email address");}
    else if(!validateEmail(email_input.text)){createStatus("enter valid email address");}
    else if(!message_input.length){createStatus("please enter a message");}
    else {
        variables.name = name_input.text;
        variables.email = email_input.text;
        variables.message = message_input.text;
    request.url = "gdform.php";
    request.method = URLRequestMethod.POST;
    request.data = variables;
    var loader:URLLoader = new URLLoader();
    loader.dataFormat = URLLoaderDataFormat.VARIABLES;
    loader.load(request);
    createStatus("Thanks " + name_input.text + ", your message has been sent!");
    function createStatus(msg:String):void {
        status_txt.text = msg;
        status_txt.setTextFormat(myFormat);   
    function validateEmail(str:String):Boolean {
        var pattern:RegExp = /(\w|[_.\-])+@((\w|-)+\.)+\w{2,4}+/;
        var result:Object = pattern.exec(str);
        if(result == null) {
            return false;
        return true;
    this is the php on the server that I submit to.
    <?php
        $request_method = $_SERVER["REQUEST_METHOD"];
        if($request_method == "GET"){
          $query_vars = $_GET;
        } elseif ($request_method == "POST"){
          $query_vars = $_POST;
        reset($query_vars);
        $t = date("U");
        $file = $_SERVER['DOCUMENT_ROOT'] . "/../data/gdform_" . $t;
        $fp = fopen($file,"w");
        while (list ($key, $val) = each ($query_vars)) {
         fputs($fp,"<GDFORM_VARIABLE NAME=$key START>\n");
         fputs($fp,"$val\n");
         fputs($fp,"<GDFORM_VARIABLE NAME=$key END>\n");
         if ($key == "redirect") { $landing_page = $val;}
        fclose($fp);
        if ($landing_page != ""){
        header("Location: http://".$_SERVER["HTTP_HOST"]."/$landing_page");
        } else {
        header("Location: http://".$_SERVER["HTTP_HOST"]."/");
    ?>

  • Getting error (-1202)  can't add money with i-tunes card...Please help!

    Does anyone know what error code (-1202) means?  I can't add any money to my I-tunes store account with an i-tunes card.  Please Help! Thanks

    Contact the support staff for the stores at http://www.apple.com/emea/support/itunes/contact.html

  • Using wall charger for first time I get error message "charging not supported by this accessory."  Been using since December and not seen this before.

    Using wall charger and am now getting error message "charging not supported by this accessory."  Have been using since December and this is first time I have encountered this.

    Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
    Is there something in the USB end of the cord perhaps?
    You didn't answer this question ....Are you using the charger and cord that came with your iPad?
    You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
    You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again.

  • I get this error when submitting the issue to DPS

    Hi am using Woodwing Enterprise to publish folios to the Adobe DPS and it has been okay, I have finished creating of a new issue and I get this error when submitting the issue to DPS : Adobe Distibution Server returned error while calling "createIssue". HTTP code: 401. HTTP message. " Unknown error.". Adobe results message: " Unauthorized for access. See logs for further details." Adobe results status: " UNAUTHORIZED." The DPS account was recently renewed

    Please contact gold support about this issue.

  • Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

    I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

    Hello Valerie Anderson,
    I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
    https://discussions.apple.com/message/21854775#21854775
    Let me know if this helps.
    Thanks!
    Harry

  • I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word"

     I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
    all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme  to resolve
    this issue. 

    Hi Waqas
    Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
    Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
    Issue #3 in the above blog link does not reflect the same error I see on my servers.
    I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
    Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
    If you added domains to the Allow List by using the
    New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
    the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
    New-OfficeWebAppsHost cmdlet.
    I have not added any domains to the Allow list so this did not help either. Should I add the domain?
    Any further help with this is much appreciated.
    Thanks again.
    Yoshi

  • New install of SQL Server 2012 x64 Express on Windows 2008 Server, keep getting error when using Management Studio?

    After installing the x64 with all tools excluding the SDK from the SQL Express Edition, I go to Management Studio, log in and get the error when I click under the Instance name- Databases...Have reinstalled many times, removed all directories and registry
    keys from both HKEYs(regular and Wow6432Node) before rebooting and reinstalling. No VS installed on this computer..put it looks like it installed "MS Visual Studio 2010 Shell (Isolated)-ENU" and "Visual Studio 2010 Prerequisites".....tried working past
    the error, it just hangs the Studio after it tries to add things...HELP..PLEASE!!!
    Object reference not set to an instance of an object. (Microsoft.VisualStudio.Platform.WindowManagement)
    Program Location:
       at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryService(Guid& guidService, Guid& riid, IntPtr& ppvObject)
       at Microsoft.VisualStudio.Shell.ServiceProvider.GetService(Guid guid, Type serviceType)
       at Microsoft.VisualStudio.Shell.ServiceProvider.GetService(Type serviceType)
       at Microsoft.VisualStudio.Shell.WindowPane.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerToolWindow.GetService(Type serviceType)
       at Microsoft.VisualStudio.Shell.WindowPane.System.IServiceProvider.GetService(Type serviceType)
       at System.ComponentModel.Design.ServiceContainer.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorerControl.System.IServiceProvider.GetService(Type serviceType)
       at System.ComponentModel.Design.ServiceContainer.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NodeContext.GetService(Type serviceType)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.<GetColumnsFromNavigationService>d__11.MoveNext()
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.AddFields(List`1 list, IEnumerable`1 fields, IDictionary`2 allValidFields, AddFieldsFlags flags)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.GetParentFields(INodeInformation source, Dictionary`2& allValidColumns)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
       at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)

    Hi igorteper,
    Any progress?
    "MS Visual Studio 2010 Shell (Isolated)-ENU" and "Visual Studio 2010 Prerequisites" had been installed in your computer, or there is no Visual Studio installed on this computer?
    You log in SQL Server Management Studio and get an error. For further investigation the issue, please post the error messages in detail.
    TechNet Subscriber Support
    If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Thanks,
    Maggie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

  • I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    May depend on which version of iPhoto you have installed.
    Check out this thread >   https://discussions.apple.com/message/15324917#15324917

Maybe you are looking for