Getting GeoRasterException with blank message

I've modified the Loader.java demo code that comes with GeoRaster to do a validate:
XMLType attr5 =
XMLType.createXML(conn,jgeor.getMetadataObject().getXMLString());
Object[] attrs = new Object[5];
attrs[0] = attr1;
attrs[1] = attr2;
attrs[2] = attr3;
attrs[3] = attr4;
attrs[4] = attr5;
Boolean isvalid;
isvalid = jgeor.getMetadataObject().validate();
System.out.println("metadata isvalid="+isvalid.toString());
// validate the GeoRaster
try {
isvalid = jgeor.validate();
} catch (GeoRasterException ee) {
System.out.println("error message is "+ee.getMessage());
ee.printStackTrace();
STRUCT completeGeor = new STRUCT(georDesc, conn, attrs);
//Send the STRUCT to the db.
PreparedStatement updateGeorFinal = conn.prepareStatement(
"UPDATE "+m_imageTable.getText().trim()+" a SET a."+
m_columnName.getText().trim()+" = ? "+
"\n WHERE a."+m_columnName.getText().trim()+
".rasterid = ? "+
"\n and a."+m_columnName.getText().trim()+
".rasterdatatable = ?");
However, when I run this I get the following:
metadata isvalid=true
error message is
oracle.spatial.georaster.GeoRasterException:
     at oracle.spatial.georaster.JGeoRaster.validate(JGeoRaster.java:466)
     at oracleloader.OracleLoader$ImporterDialog.okButton_actionPerformed(OracleLoader.java:960)
     at oracleloader.OracleLoader$ImporterDialog.access$000(OracleLoader.java:107)
     at oracleloader.OracleLoader$ImporterDialog$1.actionPerformed(OracleLoader.java:560)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6288)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6053)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4651)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4481)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4481)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:643)
     at java.awt.EventQueue.access$000(EventQueue.java:84)
     at java.awt.EventQueue$1.run(EventQueue.java:602)
     at java.awt.EventQueue$1.run(EventQueue.java:600)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:616)
     at java.awt.EventQueue$2.run(EventQueue.java:614)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
     at java.awt.EventQueue.access$000(EventQueue.java:84)
     at java.awt.EventQueue$1.run(EventQueue.java:602)
     at java.awt.EventQueue$1.run(EventQueue.java:600)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:616)
     at java.awt.EventQueue$2.run(EventQueue.java:614)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:613)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
I can't seem to get any information on why the validate is failing. Am I doing something wrong?
Thanks
Mike Dunham-Wilkie

You need to make sure two rasterType values (one in metadata and the other one in GeoRaster object) same.

Similar Messages

  • Incoming Emails with Blank message body in Outlook 2013 and 2010

    Dear TechNet
    Why Some of the incoming message we received in Outlook  are displayed with blank message body but same message when viewed from Internet browser web  client  or in Blackberry device message body is viewable and also same message is viewable
    in outlook ver 2003 , 2007, 2010 ( without service pack1)
    Above problem of incoming email message with blank message body we are facing to users with outlook2013 and outlook 2010 (with sp1) and when the sender of the email is using  Lotus Notes Client ver 8.5.3
    Request you kindly suggest any setting need to be done in outlook or windows registry to resolve the email messages with blank body.
    Thanks in Advance ............................
    Regards,
    Jayesh
    Mob : 09819375673

    This is commonly seen with an Outlook add-in, such as the AVG add-in. I just ran into it again today. I removed AVG and enabled Windows Defender on a Win8 laptop with Outlook 2013, and that took care of the issue. If you must use AVG, you can disable the
    add-in and then test new emails.
    To disable the AVG add-in, this is one method:
    Important Follow the steps in this section carefully. Serious problems might occur if you modify the registry incorrectly. Before you modify it, back up the registry.
          (https://support.microsoft.com/kb/322756/            )    
    in case problems occur.
    To resolve this problem, follow these steps to disable the Avgoutlook.Addin add-in. If the problem is , we recommend that you contact the vendor of the add-in to ask about an updated version of the add-in. 
    Exit Microsoft Outlook if it is running.
    Start Registry Editor.
    In Windows 8
    Press the Windows logo key+R, type regedit in the Open box, and then press Enter.
    In Windows 7, 8 or Windows Vista
    Click Start, type regedit in the Start Search box, and then press Enter.
    Locate and then select the following registry subkey, depending on the type of Office and Windows installations that you have.
    32-bit Office plus 32-bit Windows
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
    64-bit Office plus 64-bit Windows
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
    32-bit Office plus 64-bit Windows
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\Outlook\Addins\avgoutlook.Addin
    Right-click the LoadBehavior value, and then click Modify.
    Change the Value Data value to 0, and then click
    OK.
    Start Microsoft Outlook.
    Note To re-enable this add-in in Outlook, change the LoadBehavior value to
    3.

  • My book order gets stuck with the message 'your book order is not complete'

    hi,
    while trying to place my first order for a book, I get the message above, with the message that the book order is still being sent to the publisher.
    during the book submission, I went through what appeared to be a re-registration (although, using the same details, the right information seemed to be picked up in later stages of the process.)
    I am using Aperture 3 on Lion (10.7.1)
    oddly, I can't get into my 'order status' part of the Account part of the Apple store either.
    i'm not sure if something is incomplete, or what!
    anyone have any ideas, or has experienced this in the past?
    regards,
    Nick

    It seems that closing the application gives you the opportunity to cancel an 'in progress' book submission - the only way that I have come across. 
    Going in again and re-submitting has *thus far* done what is expected - I am now waiting for my confirmation email. 
    The address change screens are a bit of a mess, but that should not really make a huge difference if you are not having to change addresses - tabbing around the fields makes some sense of it. (apple, you may well want to fix this - contact me if screen shots would help)
    Nick

  • My computer uses Windows XP.  The latest Apple Update for iTunes ruined everything.  It won't load the software, and I'm getting flooded with error messages.  Is this latest update a bunch of crap?

    My computers uses WindowsXP.  The latest Apple Software Update put the latest version of iTunes on my computer, and now iTunes doesn't work.  I've tried that instructions on the Apple homepage (delete program, reinstall, etc.), and nothing works.  What's worse is that I'm getting error messages every time I log on to my computer.  Is this latest version a pile of pooh?  Anybody know how to fix this?  Or do I need to wait for Apple to figure out where they screwed up?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • OVS - getting dump with the message Subnode/attribute INPUT already exists

    Hi All,
    I am using OVS for the field Shopping cart number.whenever i click on F4 help, icon i am getting the dump with the following message  'Subnode or attribute INPUT already exists ' .. Any idea / clue regarding this dump.please advise me.
    Thanks & Regards,
    Lakshmi.

    Also check this link:-
    Regarding select options
    It also talks about the same problem.

  • MessageDriven Beans not getting called with new messages

    I have a system in which data is collected by a number of applications and sent as messages to JMS topics. I also have message-driven beans hosted on weblogic that receive these messages and convert some of the data into entity beans for storage in the database. The problem I have is that occasionally some of the message-driven beans will stop processing messages, which will lead to messages 'backing up'. If left unchecked, the messages start to consume a lot of memory, so I have put message quotas in place to limiit this growth, but the fundamental problem is that the messages are not getting processed. I considered that the MDBs that stop working may be hung up on something internal or are hung up in the database (Oracle 10), but the DB enterprise manager says that there are no blocked sessions, and the monitor data for MDBs says that there are no active objects.
    What is happening here? I am using the monitor pages for the Weblogic console, so from that I can see that messages have not been processed, and that there are no MDBs currently processing messages, but there doesn't seem to be enough clues to pin down what is happening. Where should I be looking?

    Tom:
    Thanks for the very quick reply. I have looked in the logs, and only see error messages when the message quotas are reached. I have looked at the transaction statistics in the monitor console, and it gives zero rollbacks and timeouts. However, I have not tried a thread dump, and will try that when I get into work tomorrow.
    Here are some answers to your questions:
    * What is your version and service-pack? (I recall that there were one or two long since fixed bugs that could cause stalls.)
    I believe my version is 9.22.
    * Are the problem topics running on the same weblogic server as the MDB?
    Yes
    * Are subscriptions durable?
    No
    * Are you using "distributed topics"?
    I think so; the applications that are sending the messages are on processors other than the weblogic server. Is that what you mean by distributed topic?
    * You write that you are using multiple MDBs but only some stall. Is it the same ones each time?
    Not sure. We want to make sure that we get all the diagnostic information we can before restarting the server because we're not sure if this problem will happen again within 5 minutes, or if it will run weeks. It had run stints of a couple weeks before this point without having this problem.

  • Explorer.exe error on windows 8 with blank message and a yellow warning with ok button

    Whenever i boot my laptop the attached screenshot is always popping up, it shows a window with "Explorer.exe" with a yellow warning sign and a "OK" button. 

    ok, I found a possible solution here:
    [FIX] Getting “Explorer.exe” Error On Windows 8 Start Up
    http://www.kapilarya.com/fix-getting-explorer-exe-error-on-windows-8-start-up
    Open regedit.exe, go to
    HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
    and delete the highlighted string "Load". This should fix the issue.
    "A programmer is just a tool which converts caffeine into code"

  • What do i need to get started with windows messages?

    Hello, i've searched these forums and found no answer. I would like to know how i can get started sending and recieving windows messages in labVIEW. Thanks

    LabVIEW does not support direct acces to the Windows Message Queue. I asume that you are asking this in regard to enqueued events. There are certain events which are of interested for LV and therefore they will be "passed on to LV" (simplified expression).
    If you want to have access to the Windows Message Queue manually, you have to create your own interface using MFC-based C++ wrapper. I think there are examples available for such things, but they are most often focused on specific tasks, so maybe (if available at all) they will not help you.....
    hope this helps,
    Norbert 
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • PDF file gets open with blank page behind in IE7

    Hi ,
    We have recently upgraded the IE from IE6 to IE7 version.
    Now when we are tring to open the PDF file ,it opens in Adobe Acrobat reader leaving the blank page in the behind.
    Bur earlier i.e. in IE6 we were able to open the PDF in the browser itself , no additional blank page pops up.
    We need to open the PDF in Popup page(i.e. in IE browser itself ).
    Could you please let me know what settings need to do in Adobe Acrobat Reader/IE7 .
    Regards
    Muzeeb

    per http://kb2.adobe.com/cps/333/333544.html#main_Configuring_the_browser_to_open_PDF_files_wi thin_the_browser_window
    Configuring the browser to open PDF files within the browser window
    When you install Acrobat or Adobe Reader on a system that includes a browser, you automatically configure the browser to open PDF files within the browser window. Acrobat and Adobe Reader install ActiveX plug-in files that allow you to use Internet Explorer or AOL to open PDF files. If either application is installed, but PDF files don't open in the browser window, then work through the following steps to configure the browser.
    Make sure that the ActiveX folder contains files required for web browsing.
    To open PDF files in a browser window, the ActiveX folder must contain the following files: AcroPDF.dll, AcroIEHelper.dll, and pdfshell.dll.
    The ActiveX controls should be located in: Program Files\Common Files\Adobe\Acrobat\ActiveX
    If any of these files are missing, then repair Acrobat or Adobe Reader by choosing Help > Repair Acrobat Installation, or reinstalling the application.
    Restart Windows to make sure all registry changes are registered,

  • I get email with blank "from", blank "subject" and nothing in it! What is i

    Anybody knows why I have started getting emails that have no from, no subject and no body? I'm not sure when it started exactly, I have been getting about one a week and today I got 2 together. Strange behaviour...

    I have been getting these too! They really bother me. And sometimes I get email that has a weird bunch of nonsense letters and numbers as the sender.
    I usually delete these immediately without opening them, but wonder what is going on!

  • Nfragentd.log gets filled with error messages during FS scan

    Hi,
    We are seeing A LOT of error messages like this one in the nfragentd.log files (one scan can generate 4 full log files!):
    less /var/opt/novell/filereporter/agent/log/nfragentd.log
    01 2014-11-06 00:59:57 -18000 3 0006 43591 7f0f49bce700 SRSScanAndCollectFileSystemDataService::GetScanDat aEntryMetaDataAndSecurityInfo() - Called AddSecurityPrincipalToInventory(L"SERVER", 32848, false), Scan ID = "982", Result = 15. {Cr
    eator}
    Is it something to worry about, or is it something benign like the owner of the file has been deleted from eDir? If it is benign, how can this be suppressed?
    Also this seems to delay the scan, so resolving this would improve scan performance.

    On 11/6/2014 9:46 AM, ablovatskia wrote:
    >
    > Hi,
    >
    > We are seeing A LOT of error messages like this one in the
    > nfragentd.log files (one scan can generate 4 full log files!):
    >
    > less /var/opt/novell/filereporter/agent/log/nfragentd.log
    >
    > 01 2014-11-06 00:59:57 -18000 3 0006 43591 7f0f49bce700
    > SRSScanAndCollectFileSystemDataService::GetScanDat aEntryMetaDataAndSecurityInfo()
    > - Called AddSecurityPrincipalToInventory(L"SERVER", 32848, false), Scan
    > ID = "982", Result = 15. {Cr
    > eator}
    >
    > Is it something to worry about, or is it something benign like the owner
    > of the file has been deleted from eDir? If it is benign, how can this be
    > suppressed?
    >
    > Also this seems to delay the scan, so resolving this would improve scan
    > performance.
    >
    >
    ablovatskia,
    What sort of volume are you scanning, in this case?
    -- NFMS Support Team

  • Topic: TCP/IP Message gets Appended with two dots...(Urgent)

    Dear All,
    I am working on a requirement where I am sendind a message
    (underlying protocol used TCP/IP) using a program
    developed using Java Sockets.
    It sends the messgage on desired mechine and port but two dots(..)
    gets appended with this message .
    I am really not able to figure out from where these dots are coming ,
    is it the network that appends these dots.
    Any clue will be helpful.
    An early response is highly appriciable.
    Thanks and Regards
    Dushyant Bhardwaj

    You should use a BufferedWriter instead of a PrintWriter, since you're using a BufferedReader. these streams tend to work best in pairs. The readLine requires a newline, so
    import java.io.*;
    import java.net.*;
    public class TestSW
            public static void main(String[]args)
                    BufferedWriter output;
                    BufferedReader networkBin;
                    Socket socket=null;
                    try{
                            socket = new Socket("127.0.0.1",5050); // connect to echo server
                            output = new BufferedWriter(new OutputStreamWriter(socket.getOutputStream()));
                            networkBin = new BufferedReader(new InputStreamReader(socket.getInputStream()));
                            output.write("testing");
                            output.newLine();
                            output.flush();
                            System.out.println(networkBin.readLine());
                    }catch(IOException e){
                            e.printStackTrace();
                    }finally{
                            if(socket != null){
                                    try{socket.close();}catch(IOException ce){}
    }

  • Mail 3.6 delivering blank messages

    Mail has suddenly started delivering some emails with blank messages. The messages seem to be from businesses (bank, Netflix, library, etc). When clicking on message to open, multi-colored ball rotates for sometime, then black & white circle whirls with 'loading' displayed. The email finally opens with only the heading showing. Message is completely blank. Can receive emails from individuals with attachments without a problem.
    Any suggestions?

    HI Wanda,
    This is the Safari forum.
    Post over in the Leopard / Mail forum here.
    http://discussions.apple.com/forum.jspa?forumID=1223
    Carolyn

  • High processor use and blank messages in Yosemite mail

    Hello
    I am noticing very high processor use from Yosemite Mail, and I am also having problems with blank messages.
    Under Mavericks, I had a problem where I double click on a mail message to open it.  The message would flash on the screen for a moment and then disappear.  The message in my inbox would be marked as read.  I could then open it again and read it normally.  Over time, I tracked this down as having to do with Mail doing anything else when I requested to open the email.  For instance, if I delete a message and then immediately try to open the next message, the problem would occur.  If I waited 5 seconds or so, then opened the next message, the problem would not occur.
    Now, under Yosemite, I find that if I open a message quickly after performing another task, the message window is blank and never fills in.  I can close that message window and open it again, it may work, or it may still be blank.  I have found where certain messages appear to be stuck and will open blank until I open a different message and then come back to the problem message.
    I have also noticed that Mail under Yosemite appears to use very high percentages of processor time.   Checking the activity monitor, Mail is third behind WindowServer and kernel_task for processor usage.  And I have another question on the community about my system running hot with the fan spooling up and down constantly under Yosemite, something that almost never happened under any of the previous OS's going back to Snow Leopard.
    Any idea what is going on with the Mail app in Yosemite?  I was excited about Mail finally advancing in capability, but it seems to have come at a cost.....  Come on Apple - Mail needs to catch up with Outlook!

    I also have this problem since Yosemite upgrade. Infuriating because I can't just read incoming emails anymore. It seems to be specific to one email account and doesn't necessarily cause a problem with others. When this happens, (showing the content for a second then disappearing), there is a segmentation fault reported in the error log.
    For me, this is a category one critical business problem. If I can't read and reply to incoming email reliably on my computer, I will need to switch to another system or device that can.
    24/10/2014 14:51:34.839 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
    24/10/2014 14:51:36.262 com.apple.xpc.launchd[1]: (com.apple.WebKit.WebContent.A9C826DA-A925-4168-ADFD-46A9B4012097[6900]) Service exited due to signal: Segmentation fault: 11
    Good news is that the email app does seem to work a bit quicker than before using Mavericks where it could hang for 10-20 seconds for no particular reason.
    Hope this can be fixed or a workaround posted soon.

  • Job SM:EXEC SERVICES  gets cancelled with  SYNTAX_ERROR

    Hi,
         The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
    Syntax error in program "RDSVASAEA_ROOT_____________050 ".
    I performed a syntax check on the program in the ABAP Editor and it gives the following result :
    Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
    specified tables nor defined by a "DATA" statement. "DATA" statement.
    Can you let me know, how to solve this problem.
    My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
    ST-SER and ST-ICO are with the latest support pkg level,
    Regards,
    Anil.

    These steps can be done easier as of Support Package Stack 15:
    >
    Amit Devale wrote:
    > Step 1:
    > Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
    > in the service definition tables
    >
    > Step 2:
    > Execute a 'Refresh service definitions' task session in transaction
    > SDCCN ->Task ->Create ->'Refresh service definitions'
    >
    > Step 3:
    > Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
    > _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
    Hi Amit,
    Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
    [SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
    This offers an easy way to update the service definitions and to generate the logfunc Includes.
    Step 0: Ensure that optimizer statistics exist for table D010INC.
    Step 1-3 :You can use functionality in SDCCN to execute these steps.
    Perform:
    - Path: SDCCN -> Utilities -> Maintain Service Definitions
    - Select 'Delete and Replace Service Definitions -> Confirm this selection
    - Confirm that you want to delete the definitions
    - Confirm that a new task 'Service Definition  Refresh' was created
      (Take a note of the task id -> Review the log for this task id when it is completed)
    You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
    Best regards,
    Ruediger
    P.S.: Great, that you start to share your rich experience here in SDN.

Maybe you are looking for

  • Examples of hwo to insert an XML file into a field which is of type CLOB

    I am trying to use the following command, but it does not work, due to a type issue, anyone have another example? INSERT INTO TEST VALUES (xmltype(bfilename('c:\', 'c:\test.xml') , nls_charset_id('AL32UTF8')));

  • Trouble restoring Iphone 5s

    i have forgotten the password for my iPhone 5s and i put the phone into recovery mode and restore and update. everything goes well until the end of the update. It will say "The software for the iPhone "iPhone" was corrupted download. I have tried to

  • Drop shadow on tex?

    I'm sure this as easy as can be- but I can not find the "enable shadow" in the HUD when I have my text selected. I need a simple drop shadow on text against photo. please help.

  • Change itune format to MP3

    How do I change the itunes format of a song to MP3 or WAV format

  • Weblogic Server Domain Metrics

    Hi, using the solaris 10.2 agent, i added two weblogic domains running in a windows box (there are no 10.2 agents for windows yet) i'm missing some metrics, maybe because the agent is not running on the same machine, but there are two targets that ar