Getting started again with recording songs

I have written several songs and I want to record, mix & edit them on my computer; I may also want to add video to some of the songs. I don't want to buy something like cakewalk if I can use an Adobe product that will work with PP CS4.
I already have PPCS4 that I have used to make a guitar set-up and adjusting tutiriol HD DVD that I am selling on Ebay. It comes with a tool kit and the video turned out great. Being somewhat familiar with Adobe products........,
my first, of what may be many question is: Can I use PP CS4 like a multi-track? Or do I need another application software, like Soundbooth or.........?
I will ty to keep my questions single bases, so I don't get confused with a lot of stuff all at once. LOL
Thanks
Jim

My advice is don't try to use Premiere Pro for recording audio. It has multiple audio tracks, but those are for editing, not recording. Soundbooth CS4 and CS5 do multi-tracks pretty well and the software is easy to use. But for heavy-duty editing with a lot of effects, racks and so forth, then use Adobe Audition. Soundbooth is mostly for light-duty editing and for editing the sound tracks of videos. Audition is a much more professional-quality tool and will interface with your instruments and other electronics. Just make sure to buy version 3.0 and not an older version on eBay (unless you're doing it just to qualify for an upgrade). Versions 1 and 2 have serious issues and might not even run on your machine.

Similar Messages

I am in subscription center because my billing information expired. I updated my billing information but how do I get my account to get started again?

I am in subscription center because my billing information expired. I updated my billing information but how do I get my account to get started again?

Hi Eric ,
You can log in to Adobe.com with your credentials ,i.e Adobe id and password .
By clicking on the manage account tab you can easily update the information and get started .The manage account tab will prompt you for the password ,that password is same as your Adobe password.
You may want to refer to the following link for the same.
https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
Regards
Sukrit Dhingra

I am getting a message with some songs in my itunes library that has a different user id and says my computer is not authorized to play this song. ***?

Since transferring my iTunes library to a new computer, my library is just a mess. There are lots of songs that are duplicated 2, 3 and 4 times although all but one of the songs will get a message saying iTunes cannot find the file. Now I am getting a messages with some songs that shows a different user id for iTunes and wants the password. I have spent lots of $$$ and time trying to resolve these issues but really want to know what the heck is going on here?

Maybe you purchased some of the other songs using a different itunes account.
Could this be?

Using Getting Started VI with HP54845 scope

I'm trying to run the supplied "Getting Started" IVI with the Agilent HP54845 scope that is included in the download package for the hp548xx device. The instrument input is GPIB::7::INSTR and the Initialize with Options portion of the subVI returns an OK when run. The series of VIs in the subVI "hp548xx Acq Wfm Edge Triggered" also return OK values up to the "Read Wfm" VI. I then get a timeout error (Error number BFFF0015). Am I using the wrong instrument handle and, if so, what is the correct handle. This is the default format when I create an input to this "Read Wfm" VI. The Plug & Play VIs work for this device and I am able to display scope traces in LabView when I use the supplied P&P VIs so I am able to talk to t
he device.

Probably the most common reason for timeout (BFFF0015) in an oscilloscope read waveform is failed trigger event. Most likely the Getting Started VI uses edge triggering. Check the edge trigger level setting and verify that it is set to be within the range of your expected signal.

[Forum FAQ] Get started quickly with the Visio 2013 trial

Recently, some customers encountered the problems when trying to download the Visio 2013 Trial via TechNet Evaluation Center. Generally, we can download and install Visio Professional 2013 trial by the following steps:
1. Click “Get Started Now” on
http://technet.microsoft.com/en-us/evalcenter/hh973399.aspx
2. Fill out the online form and choose the right version of the software.
3. Save your trial key. Once signed in, you will receive a trial product key along with an option to download the trial package.
Please note:
32bit and 64bit version has different product key.
Make sure you have choose the desired language before you click “Download”

Or, you can also click the download URL to download it directly.
Note:
The TechNet trial of Visio 2013 is no longer to be downloaded as .img format, it has changed to .exe format. We can install it directly.
Troubleshooting
Can’t open the download link or get 404 error
We'd better check the IE's settings, try the following steps:
1. Install the latest updates.
2. Clear your browser's cache.
3. This issue is related to permission, you may run IE as administrator for a test.
4. Ensure that the Internet Explorer security settings are not set to high. Also disable
enhanced protected mode.
5. May be one of your add-ons that causing this. Manage add-ons in Internet Explorer:
http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7
6. You could add these addresses to the browser's list of Trusted sites. To do this, click
the green tick and then the button marked Sites, and paste an address into the box that says "Add this website to the zone.
7. Also temporary disable or uninstall the security software such as anti-virus software
to see whether the issue occurs.
No response after clicking the download command with IE
Make sure we have chosen the language version.
Make sure you've not set block the pop-up windows in IE, because we need to install the "Akamai NetSession Interface" add-on.
Can’t find the download file
The TechNet trial of Visio 2013 is no longer to be downloaded in .img format, it has changed to .exe format. We can install it directly. Please find the exe file with the
following names:
32 bit: VisioProfessional_x86_en-us.exe
64 bit: VisioProfessional_x64_en-us.exe
Can’t get the trial key
Run IE as administrator
Check the IE add-ons (http://windows.microsoft.com/en-us/internet-explorer/manage-add-ons#ie=ie-10-win-7)
Add these addresses to the browser's list of trusted sites
Clear your browser's cache
Change a browser (Such as Firefox, chrome. Eg)
To see the previous Blog, go to
http://blogs.office.com/2013/10/07/get-started-quickly-with-the-visio-2013-trial/
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

What hardware, software, etc. is required to get started developing with iOS?

What hardware, software, etc. is required to get started developing with iOS? Looking to get started...
Thanks!

You need an Intel Mac, at least OS X 10.6.8 (Lion if you intend full capability) and Xcode.
See http://developer.apple.com/

Three Getting Started Questions with RV180

I recently purchased the RV180 router. I have a few quick "getting started" questions about using it:
1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
Thanks!

Hello,
1. Is the "Static DHCP" the screen I need to use in order to reserve DHCP addresses (see attached)? That's where I've been reserving all my DHCP addresses with. I'm just making sure I have the correct screen.
Yes, that is the correct location to set DHCP reservations.
2. Do I need to do anything to "backup" my configuration, or will my settings still be around when the RV180 reboots?
Whenever you hit save after making a change you configuration is saved and will survive a reboot.
If you would like to save backup copy of your configration file just go to Administration >> Backup/Restore settings.
3. Do I need to run a check for firmware update on the RV180, and how do I update the firmware on the RV180 (as well as the SG200-18), or does it usually come with the latest firmware out-of-the-box? If I go ahead and put a service contract on the RV180 and SG200-18, will I receive my firmware updates automatically? Are the part numbers for the service contracts the same for the RV180 and SG200-18?
You will need to manually update the firmware on the RV180. That firmware is available here:
RV180 Firmware
It is simply one file, that you upload under Administration >> Firmware Upgrade. There is no bootcode for the routers (like there was with your switch)
You can locate this in the future the same way you did the SG200 firmware (because this link may change) on the Cisco website.
As for the service contract, the part number for both of those devices will be CON-SBS-SVC2.
Hope that helps, and I will try to get to your other questions sometime today as well. Also since you just bought there you are of course welcome to call in and get some support over the phone, both your devices do come with 1 year of technical support, and it sounds like you are getting or have contracts, so I guess make that 3 years.
Cisco Small Business Support Center Contact Numbers
Thanks again for choosing Cisco,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Anyway to 'start again' with the N95? In a sense f...

My N95 hasnt been running at its best recently. Its seems to be slower here and there, my maps have disappeared, the gps doesnt connect, wifi doesnt always work properly etc and all these little glitches get on your nerves! Is there anyway to, in a sense, start again? Like a computer can be formatted. Is there a way to completely re-install the firmware or anything of such?
Thanks.

01-Jul-2008 03:11 PM
psychomania wrote:
If you want to totally start from scratch format your memory card then hard reset the phone.
This will return it to an out-of-the-box state. Backup anything you want to keep.
The hard reset is the most complete method of doing this, other than getting it flashed at a nokia care point. It's also safe compared to reinstalling the firmware.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers!
Message Edited by psychomania on 01-Jul-2008 02:12 PM
Mostly you can make the hard reset by dialing *#7370# with the code 12345.

Getting Started PDF with V3 images

Hi Guys
We supply all our clients with a BC pdf document made a few years ago called "Getting Started Guide". I note that there is no new guide and a lot of the content on the Knowledgebase still references V2 menus. I really want to give clients a tailored PDF rather than get them looking at the KB and seeing a lot information that is not necessary. Has anyone made a V3 guide they want to share?
Kenton

+1 - This is a big miss for me. Having to explain that our GSG is being updated as we onboard new clients puts a ***** in our armor that I'd rather not have. I'm not against creating my own, but a sanctioned copy would be nice. Any ETA, ABC friends?

Delete library from old ipod and start again with whats on another iphone

I'm using my daughter's old computer with itunes.
It has her library on it.
I want to delete the library and sync it with whats on my iphone.
I tried remove program and reinstalling from itunessetup.exe but the old library remained.
How do I get itunes with the songs from my iphone on this computer without having all the songs from my daughter's old library on it as well.

If it's an older ipod, you can physically pull the files from it as though it was another hard drive and then add them to iTunes.
If it's an iPhone/iTouch, you need special software (unable to be discussed here due to TOS - look up "TuneAid" on the web) to get the music off the device and into the library. Without that, you can only overwrite (erase) what is on the iPhone and replace with new music from your library.

After recharging nano starts again with playing first song

on my nano or a couple of hundred songs after some playing time recharging is needed.
after playing again (after recharging) the nano starts with the first song in the playlist and not where stopped.
how can i arrange that after recharging the nano goes on with playing the last played song and so on.
Windows XP Pro
Windows XP Pro

Are you connecting it to the computer to charge? If so, you can't. It will go to the "do not disconnect" screen and so lose it's place.
However, if it's connected via a wall charger, it should resume from where it left off after it's charged.
At least, that's my experience.

HT201401 My little brother has changed my password on my phone, and i cant get on to it.. how to i wipe my phone to start again with out a password?

Need to find out how to wipe my phone so that i can get onto it as my brother changed my password and i cant get onto my phone what so ever.

Then you'll have to force the phone into recovery mode and restore it. Turn your phone off:
Then, leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

HT4623 how to get started connected with laptop with net connection but announcement is to try using wifi ,try again over mobile please help me

Sim card inserted in a new iphone 4s but iphone is not activated and announcing try using wi fi or try again over mobile please help?

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

My macbook (born 2006, mac os x snowleopard) broke down. I started again with DVD, but can not find hard disc, to repair it - can any body help me, pleeeeease?

first time, using that way looking for help (in former times I get it directly from apple...). My problem: my macbook was getting more and more slowly, I turned it off an after turning on again, there was only a question mark. after starting with system-DVD, I could not find the hard disc to repaire it with first aid or do any thng else. I´m writing with macbook pro of my daughter now and ugentnly need to start my macbook as soon as possible. could any body help me??? (sorry, my english is a not so well) andrea from berlin

Since you have the system disks, you can try running the Apple Hardware Test, that should confirm if the drive is dead or not. You'll use the disk that says 'AHT Version x.x' in small print on the label.

Randomly start playback with first song

I have an iPod Touch 5th generation running iOS 6.1.3. I listen to music and audiobooks using iTunes using ear buds, or the lightning USB cable in my car. Every 5 to 10 times I plug it into my car USB, regardless of what I had been just listening to, it will start playing the alphabetically first song on the iPod. If I do not do anything, it will keep working through the songs in alphabetical order.
Why? This is very irritating when I'm listening to an audiobook.
It has been doing this through at least the previous 2-3 iOS updates.

Here it is:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
powerspec4.0k AWRDACPI
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X300 Series\RADEON X300 Series
IDE\DiskSAMSUNGSP1614C________________________SW100-34, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskGENERICUSB_Storage-CFCI16A, Bus Type USB
USBSTOR\DiskGENERICUSB_Storage-MSCI16A, Bus Type USB
USBSTOR\DiskGENERICUSB_Storage-SDCI16A, Bus Type USB
USBSTOR\DiskGENERICUSB_Storage-SMCI16A, Bus Type USB
IDE\CdRomTSSTcorpCD/DVDW_TS-H552B_______________TS04___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
H: TSSTcorp CD/DVDW TS-H552B, Rev TS04
Audio CD in drive.
Found 15 songs on CD, playing time 54:55 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:33:05
Track 3, start time 06:20:27
Track 4, start time 11:20:15
Track 5, start time 14:20:42
Track 6, start time 18:24:17
Track 7, start time 22:53:60
Track 8, start time 26:22:05
Track 9, start time 30:12:02
Track 10, start time 33:05:00
Track 11, start time 37:06:55
Track 12, start time 41:20:57
Track 13, start time 43:31:15
Track 14, start time 47:03:05
Track 15, start time 50:08:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 40.
The drive CDRW speeds are: 40.
The drive DVDR speeds are: 40.
The drive DVDRW speeds are: 40.

Getting started again with recording songs

Similar Messages

Maybe you are looking for