Getting "Unable to write cache file" message in DW CS4

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws.  If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
-Steve

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws.  If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
First of all, only delete cache files when DW is shutdown.
Also, there are a few different caches. That article only addresses 1 of them. Take a look at this TechNote to be able to find the Site .dws cache files:
http://kb2.adobe.com/cps/598/5989f7f4.html
HTH,
Randy

Similar Messages

  • Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

    Hi,
    Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
    **sys-package-mgr: can't write cache file for**
    and have lots of cache file errors for different packages
    Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
    SOA 11.1.1.5 install got can't write cache file
    So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
    Thanks

    Hi,
    I don't see python.cachedir in config.sh. Here is config.sh
    #!/bin/sh
    mypwd="`pwd`"
    # Determine the location of this script...
    # Note: this will not work if the script is sourced (. ./config.sh)
    SCRIPTNAME=$0
    case ${SCRIPTNAME} in
    /*)  SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
      *)  SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
    esac
    # Set the ORACLE_HOME relative to this script...
    ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
    export ORACLE_HOME
    # Set the MW_HOME relative to the ORACLE_HOME...
    MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
    export MW_HOME
    # Set the home directories...
    . "${SCRIPTPATH}/setHomeDirs.sh"
    # Set the config jvm args...
    CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
    export CONFIG_JVM_ARGS
    # Delegate to the main script...
    "${WL_HOME}/common/bin/config.sh" "$@"Thanks

  • SOA 11.1.1.5 install got can't write cache file

    Hi,
    I installed 2 node cluster of SOA 11.1.1.5 on linux and during domain configuration I got errors i.e.
    **sys-package-mgr: can't write cache file for**
    Installation was done and all the servers start/stop fine am able to deploy the processes, am able to access all the urls fine everything coming up fine BAM, SOA, OSB etc . Just wondering if the error above have any effect on the installation or any piece that might not work. As I have already did the installation and ignored those errors above so just wanted to see if anything I need to look for.
    Thanks

    Hi,
    It's a cluster install and took sometime to do the full install so it will be a pain to re-install everything over. Currently have tested the processes and seems to be working fine.
    Also I don't find
    /var/tmp/wlstTemp
    I do see wlstTemp appended with linux users who did Oracle SOA install.
    Also in-future when creating a new environment besides the above chmod 777 on /var/tmp/wlstTemp is there any parameter we can supply when running config.sh. I read some where that in-order to get by these errors at the time of domain creation we can also pass some parameter.
    Thanks

  • Error in LSMW Unable to write to file 'C:\ZSIGCO_CP_ZSIG

    Hello,
    In the Step 9  'READ DATA'  I get the Error:  'Unable to write to file 'C:\ZSIGCO_CP_ZSIGCO_CP_ZSIGCO_CP.lsmw.read'
    I do not know what the Problem is and how should I solve this Problem.?
    Can any body help me sort out this Issue..?
    Regards,
    Deepak.

    Thats right the file specification should look like this :-
    ZXX - XX - ZXX Test
    Files
    Legacy Data          On the PC (Frontend)
    Legacy Data          On the R/3 server (application server)
    --   Imported Data        File for Imported Data (Application Server)
    Imported Data                  ZXX_XX_ZXX.lsmw.read
    --   Converted Data       File for Converted Data (Application Server)
    Converted Data                 ZXX_XX_ZXX.lsmw.conv<<<----
    destination file where to write
    Wildcard Value       Value for Wildcard '*' in File Name
    Reagrds
    Dhirendra

  • Sickbeard fails to start. "Unable to write PID file" [Solved]

    I've installed sickbeard from the AUR but can't seem to get it started.
    when running "sudo systemctl start sickbeard.service" I get the following output:
    Job for sickbeard.service failed. See 'systemctl status sickbeard.service' and 'journalctl -xn' for details.
    'systemctl status sickbeard.service' provides:
    sickbeard.service - SickBeard daemon
          Loaded: loaded (/etc/systemd/system/sickbeard.service; disabled)
          Active: failed (Result: exit-code) since Sat 2013-02-23 14:49:19 CST; 1min 4s ago
         Process: 11518 ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config $SB_CONF --datadir $SB_DATA --port $SB_PORT --pidfile=/run/sickbeard/sickbeard-8081.pid (code=exited, status=1/FAILURE)
    Feb 23 14:49:18 arch systemd[1]: Starting SickBeard daemon...
    Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
    Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
    Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
    Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
    And it looks like 'journalctl -xn' provides about the same info:
    -- Logs begin at Tue 2013-01-08 17:25:44 CST, end at Sat 2013-02-23 14:53:29 CST. --
    Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
    Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
    Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
    -- Subject: Unit sickbeard.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/li … temd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
    -- Unit sickbeard.service has failed.
    -- The result is failed.
    Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
    Also, here is the current systemd file for sickbeard, if that helps:
    [Unit]
    Description=SickBeard daemon
    After=network.target
    [Service]
    EnvironmentFile=/etc/conf.d/sickbeard
    User=sickbeard
    Group=sickbeard
    ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config "$SB_CONF" --datadir "$SB_DATA" --port "$SB_PORT" --pidfile=/run/sickbeard/sickbeard-8081.pid
    Type=forking
    TimeoutStopSec=20
    PIDFile=/run/sickbeard/sickbeard-8081.pid
    [Install]
    WantedBy=multi-user.target
    So I guess obviously the important part is "Unable to write PID file: No such file or directory [2]", but I'm not really sure what that means or how to fix it. I've played around with the PIDfile configuration for the systemd service (tried renaming from sickbeard to sickbeard-8081) but I always get the same error.
    Any ideas?
    Edit: Solved by teekay
    Last edited by spurious_access (2013-02-24 08:09:01)

    The sabnzbd systemd unit file doesn't use a pidfile. Not sure why. It would make more sense there than it does for sickbeard, because IMHO sickbeard should run as the user who owns the target tv-series media folders. Using tmpfiles.d just causes a headache when you are going to update it using the AUR package.
    I installed it once using sickbeard-git from AUR, changed the systemd unit file and /usr/lib/tmpfiles.d/sickbeard.conf to match my user, chown -R'ed /opt/sickbeard, ran "pacman -R --dbonly sickbeard-git", and ever since use "git pull" to update. That also works directly from web interface.
    Last edited by teekay (2013-02-24 08:47:42)

  • WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

    WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

    Margaret
    Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
    1. The usual Premiere Elements 8 drill.
    a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
    For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
    b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
    c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
    Apple - QuickTime - Download
    2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
    a. Is computer opitimized, defragmented, etc.
    CCleaner - PC Optimization and Cleaning - Free Download
    b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
    required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
    3. Project Specifics
    For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
    a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
    b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
    c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
    See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
    Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
    Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
    Video
    video compression
    audio compression
    frame size
    frame rate
    interlaced or progressive
    pixel aspect ratio
    If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
    Photos
    Pixel dimensions and how many photos?
    Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
    Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
    ATR

  • "When updating I get "Unable to extract downloaded file .... U44M11210".

    "When updating I get "Unable to extract downloaded file .... U44M11210". Wins server 201 2R2
    UPdated previously - but recent After Effects CC Flash, Premiere InDEsign and Prelude updates show this message

    See the following
    U44M1I210 - Creative Cloud Help / Error U44M1I210 | Install updates :
    http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

  • "Unable to open project file" message in final cut express 3.5.1

    I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

    Thank you for the response, but it hasn't worked yet...
    I read the link. I am working off my internal drive.
    I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
    Where did I go wrong???

  • Unable to write to File Server

    Hi,
    I am trying to write a file from the app server (Unix OS) onto a windows based file server using the following program.
    DATA: file TYPE string VALUE `
    Pwdf1053\temp\test.dat`,
          wa   TYPE spfli.
    OPEN DATASET file FOR OUTPUT IN BINARY MODE.
    SELECT *
           FROM spfli
           INTO wa.
      TRANSFER wa TO file.
    ENDSELECT.
    CLOSE DATASET file.
    Though the return code of open dataset is 0, the file is not written. Any idea why or how else I could write the file onto the server?
    Thanks

    hi
    good
    go through these links which ll give you teh detail idea about the open dataset than you can use in your requirement .
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/content.htm
    thanks
    mrutyun

  • Why do users get "unable to set template properties" message?

    Hi there,
    I am trying to administer a new site that was created with DW and has a .dwt (Templates/ locatedat the site root). I'm creating "Publisher" role connection keys so users can edit their subsections of the site. Users should be able to modify template properties when they edit/create new pages.
    While testing the keys, the users report that they can connect and edit pages. However, when they try to modify template properties on either a new or existing page, they get this message "Unable to set template properties" and are prevented.
    I've tried redefining the site and starting all over, tried CS3 vs. CS4 to see if it was a compatibility issue, looked at forum after forum but can't find any answers. I am experienced with DW but new to Contribute administration so I don't know what else to try. Hoping that someone will have encountered this before and can suggest a solution.
    Thanks in advance!
    ps- Let me know if there's other info I can provide to help troubleshoot.

    I did find this April 9, 2009 post from majtom2grndctrl that suggests the issue is how contribute treats https:// sites. My site is set up as majtom2grndctrl described and I am having the same problem.
    "I've got a problem with not being able to edit Template Properties on our test sites we host on HTTPS servers. I've narrowed down the problem to Contribute CS4 ignoring the website root configuration when it looks for the Templates folder. For example, say you have a site hosted at the following address:
    https://www.yourdomain.com/yourfolder/
    Contribute is configured to know your site is in /yourfolder/, but for whatever reason, when you open or create a page, and Contribute reads the InstanceBegin template="/Templates/file.dwt" tag at the beginning of HTML documents, it looks for a Templates folder at the HTTP server root, not in /yourfolder/. This prevents Contribute from loading the template while editing a document, and any attempt to edit Template Properties will yield the infamous "Unable to set template properties" dialog box."

  • Getting "Unable to submit to queue" message

    I'm trying to run a .mov file through Compressor 3.0.5 to shrink the audio track using a Dolby Digital Pro 2.0 setting. I load the necessary file, destination, and settings info into the job, but when I hit "Submit," I keep getting a dialog box that says "Unable to submit to queue. Please restart or verify that your installation is correct."
    Well, restarting hasn't helped. Neither has trying some different settings, to see if the problem is just associated with one configuration. I don't use Compressor often, but the last time I tried this routine - quite a while ago -- I believe it proceeded without a hitch. All my other FCS apps - Final Cut and Motion, at least -- have been working fine.
    Any suggestions on how to break through this submission barrier? I've got a DVD project that needs to be delivered in 24 hours. Thanks.

    There may be an issue with the installation of Compressor.
    Digital Rebellion also has FCS remover which can assist with properly removing Compressor from your system. You can then reinstall from your discs.
    Due to the shared elements in FCS you will need to feed a large part of the discs to complete the reinstall. You may just want to consider uninstalling all and then reinstalling all of FCS.
    Digital Rebellion also has a preference manager that can save preferences for FC, DSP, etc. You get to choose what you would like to save.

  • Why do I keep getting "unable to locate original file"?

    ...and then when I click "locate"...I can't find them...please help.

    When you originally put the music into iTunes, it didn't copy them into the iTunes media folder. Now, it tries to play the song from the original location, which would be gone if you used an external storage device. Before you import more song into iTunes, make sure you go to edit>preferences>advanced, and make sure the box is checked next to "Copy files to iTunes Media folder when adding to library" and you shouldn't get that message for any music you add after that.

  • Unable to write trace files in Background dump destination in oracle 10g

    Hi All,
    OS version : RHEL 5.7
    DB version : 10.2.0.4
    cluster : 2 node RAC database
    Today I faced a strange behaviour for one of our production database. Its a 2-node rac database. On the first node there is no auto generation of trace files in the BAckground dump destination. I am able to see trace files of second in its background dump dest. But the strange behaviour occurs on the first node. I see only Alert log file in the background dump dest . Inspite of getting an error which shows trace file generated but no file occurs in the bdump. The following is the error but physically there no trace file generated:
    Errors in file /oracle/db/admin/<sid>/bdump/<sid>j0011558.trc:
    ORA-12012: error on auto execute of job 94377
    ORA-12008: error in materialized view refresh pathCan anyone have any idea for this strange behaviour. There are no maintenance script for removal of trace files.
    Regards,
    Imran Khan

    ORA-00980:synonym translation is no longer valid
    Cause:The synonym used is based on a table, view, or synonym that no longer exists.
    Action:Replace the synonym with the name of the object it references or re-create the synonym so that it refers to a valid table, view, or synonym.
    Check the following :
    From User Number 1 : Osama1
    create table osama_table as select empname from scott.emp;
    create public synonym osama_tbl for osama_table ;
    grant select on osama_tbl  to user_b;
    From User Number 2 : Osama2
    select 1 from osama_tbl;
    SMITH
    ALLEN
    JONES
    MARTIN
    From User Number 1 : Osama1
    drop table osama_table;
    From User Number 2  : Osama2
    select 1 from  osama_tbl;
    ORA-00980: synonym translation is no longer valid

  • When importing from a certain Atmos Ninja Camera, I get a "unsupported or damaged file" message and can't import. Help?

       These files are MOV format from a Apple Pro-rez 422.  I have a pc. Any ideas on how to fix this? The files work fine in Quicktime.

    Hi SkyeRyder,
    These files are MOV format from a Apple Pro-rez 422.  I have a pc. Any ideas on how to fix this? The files work fine in Quicktime.
    Sorry to hear that.
    What you might try is deactivating Premiere Pro, then reactivating it: Features and Sequence Presets missing | Adobe Premiere Pro CS6, CC, CC 2014
    If that does not help, try moving the .mov files to a new folder and then import.
    Also, always import files via the Media Browser, not File > Import
    Thanks,
    Kevin

  • Unable to open RAW files after reinstalling Photoshop CS4

    I recently did a system recovery to my computer due to downgrading to Windows 7; however, after I installed Design Premium back to my PC, I am not able to open RAW files in Photoshop. It prompted "Could not complete your request because it is not the right kind of document." I tried to check for Photoshop updates but no updates are available. I tried re-installing Design Premium but the issue still persists.
    My system configuration is as follows:
    Windows 7 Professional x64 (Yet to install Service Pack 1, but I don't think that really matters)
    Adobe Creative Suite 4 Design Premium (Photoshop Version 11.0)
    Canon EOS 50D (Firmware Version 1.08)
    Anyone may have a clue on how to fix that? Thanks a lot!
    Screenshot as follows:

    When you reinstalled CS4, you  went back to the original release.
    Now you must apply all the updates to Photoshop and to  Adobe Camera Raw manually.
    You cannot rely on the Adobe auto updater to tell you that you are up to date.  That updater was broken for years and years, and that was and is certainly the case with CS4.
    Adobe didn't get their updater act together until CS6.
    You also have to update the ACR plug-in manually.

Maybe you are looking for

  • Selling iMac, how to setup software

    I'm selling my G3 iMac, and would like to install the software so that no name is on the computer, just like when you first buy it. Ideally, I'd like the buyer to get the setup assistant the first time they boot up. I'll be installing 10.2. The other

  • Nokia Messaging: MSN accounts not working

    I have some MSN accounts and I cant sync in Nokia Messaging since last Monday. This is the same problem as the Hotmail accounts? Nokia N8 / N9 / Lumia 920 White

  • 64 bit version of CE trial NW 7.1 SR1

    Is there a 64 bit version of the CE trial? If not why not?

  • Dynamic box resizing

    I was using this FLA as an example to do my own progress bar app. http://www.flashkit.com/downloads/movies/zip/8327/Simple%20Progress%20Bar%20Preloader%20-- %20Dynamic.zip I created a new box -> movie object and naming the instance "bar"... the "setP

  • What are the output specs on the creative car and house charg

    I found a belkin AC to USB adapter and here are the specs: Belkin Model: USB-TC-0 Input: 00~240 VAC, .3A, 50~60Hz Output: 5.5 VDC, A Plugs into US standard wall socket Provides one powered USB port Would this work? What are the output specs of the cr