Unable to write to File Server

Hi,
I am trying to write a file from the app server (Unix OS) onto a windows based file server using the following program.
DATA: file TYPE string VALUE `
Pwdf1053\temp\test.dat`,
      wa   TYPE spfli.
OPEN DATASET file FOR OUTPUT IN BINARY MODE.
SELECT *
       FROM spfli
       INTO wa.
TRANSFER wa TO file.
ENDSELECT.
CLOSE DATASET file.
Though the return code of open dataset is 0, the file is not written. Any idea why or how else I could write the file onto the server?
Thanks

hi
good
go through these links which ll give you teh detail idea about the open dataset than you can use in your requirement .
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/79/c554dcb3dc11d5993800508b6b8b11/content.htm
thanks
mrutyun

Similar Messages

Error in LSMW Unable to write to file 'C:\ZSIGCO_CP_ZSIG

Hello,
In the Step 9 'READ DATA' I get the Error: 'Unable to write to file 'C:\ZSIGCO_CP_ZSIGCO_CP_ZSIGCO_CP.lsmw.read'
I do not know what the Problem is and how should I solve this Problem.?
Can any body help me sort out this Issue..?
Regards,
Deepak.

Thats right the file specification should look like this :-
ZXX - XX - ZXX Test
Files
Legacy Data          On the PC (Frontend)
Legacy Data          On the R/3 server (application server)
--   Imported Data        File for Imported Data (Application Server)
Imported Data                  ZXX_XX_ZXX.lsmw.read
--   Converted Data       File for Converted Data (Application Server)
Converted Data                 ZXX_XX_ZXX.lsmw.conv<<<----
destination file where to write
Wildcard Value       Value for Wildcard '*' in File Name
Reagrds
Dhirendra

Getting "Unable to write cache file" message in DW CS4

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
-Steve

I was having some issues with a Javascript message, so looking for possible solutions, I came across “Deleting a Corrupted Cache File” in the Index to Dreamweaver FAQ located on this forum. I decided to give it a shot and carefully followed the instructions on my Windows XP, deleting the suggested cache file in my Configuration folder. That didn’t help make my Javascript message go away, though I did eventually find a work-around for that issue.
However, after deleting this cache file, I began to get the following message every time I close my program or change sites in local files, “Unable to write cache file ‘C:\Documents and Settings\...” the message ends with the site name and the extension .dws. If I go to Manage Sites and turn off the Enable Cache button for that particular site, I no longer get the message. But if I turn the Enable Cache Button back on, I get the message again. It gives this same message for all the sites.
I’m hoping others have had this issue and there is a simple fix. I can’t say for sure that deleting the cache file in the configuration folder caused this, but it was only after that I began noticing the problem, so it would make sense the two are likely related.
Also, I wonder how important the cache is. I could just turn off the Enable Cache Button for all the sites as a work-around if there's no quick fix and if it’s no big deal.
First of all, only delete cache files when DW is shutdown.
Also, there are a few different caches. That article only addresses 1 of them. Take a look at this TechNote to be able to find the Site .dws cache files:
http://kb2.adobe.com/cps/598/5989f7f4.html
HTH,
Randy

Sickbeard fails to start. "Unable to write PID file" [Solved]

I've installed sickbeard from the AUR but can't seem to get it started.
when running "sudo systemctl start sickbeard.service" I get the following output:
Job for sickbeard.service failed. See 'systemctl status sickbeard.service' and 'journalctl -xn' for details.
'systemctl status sickbeard.service' provides:
sickbeard.service - SickBeard daemon
   Loaded: loaded (/etc/systemd/system/sickbeard.service; disabled)
   Active: failed (Result: exit-code) since Sat 2013-02-23 14:49:19 CST; 1min 4s ago
   Process: 11518 ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config $SB_CONF --datadir $SB_DATA --port $SB_PORT --pidfile=/run/sickbeard/sickbeard-8081.pid (code=exited, status=1/FAILURE)
Feb 23 14:49:18 arch systemd[1]: Starting SickBeard daemon...
Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
And it looks like 'journalctl -xn' provides about the same info:
-- Logs begin at Tue 2013-01-08 17:25:44 CST, end at Sat 2013-02-23 14:53:29 CST. --
Feb 23 14:49:19 arch sickbeard[11518]: Unable to write PID file: No such file or directory [2]
Feb 23 14:49:19 arch systemd[1]: sickbeard.service: control process exited, code=exited status=1
Feb 23 14:49:19 arch systemd[1]: Failed to start SickBeard daemon.
-- Subject: Unit sickbeard.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/li … temd-devel
-- Documentation: http://www.freedesktop.org/wiki/Softwar … e9d022f03d
-- Unit sickbeard.service has failed.
-- The result is failed.
Feb 23 14:49:19 arch systemd[1]: Unit sickbeard.service entered failed state
Also, here is the current systemd file for sickbeard, if that helps:
[Unit]
Description=SickBeard daemon
After=network.target
[Service]
EnvironmentFile=/etc/conf.d/sickbeard
User=sickbeard
Group=sickbeard
ExecStart=/usr/bin/sickbeard --nolaunch --daemon --quiet --config "$SB_CONF" --datadir "$SB_DATA" --port "$SB_PORT" --pidfile=/run/sickbeard/sickbeard-8081.pid
Type=forking
TimeoutStopSec=20
PIDFile=/run/sickbeard/sickbeard-8081.pid
[Install]
WantedBy=multi-user.target
So I guess obviously the important part is "Unable to write PID file: No such file or directory [2]", but I'm not really sure what that means or how to fix it. I've played around with the PIDfile configuration for the systemd service (tried renaming from sickbeard to sickbeard-8081) but I always get the same error.
Any ideas?
Edit: Solved by teekay
Last edited by spurious_access (2013-02-24 08:09:01)

The sabnzbd systemd unit file doesn't use a pidfile. Not sure why. It would make more sense there than it does for sickbeard, because IMHO sickbeard should run as the user who owns the target tv-series media folders. Using tmpfiles.d just causes a headache when you are going to update it using the AUR package.
I installed it once using sickbeard-git from AUR, changed the systemd unit file and /usr/lib/tmpfiles.d/sickbeard.conf to match my user, chown -R'ed /opt/sickbeard, ran "pacman -R --dbonly sickbeard-git", and ever since use "git pull" to update. That also works directly from web interface.
Last edited by teekay (2013-02-24 08:47:42)

Unable to write trace files in Background dump destination in oracle 10g

Hi All,
OS version : RHEL 5.7
DB version : 10.2.0.4
cluster : 2 node RAC database
Today I faced a strange behaviour for one of our production database. Its a 2-node rac database. On the first node there is no auto generation of trace files in the BAckground dump destination. I am able to see trace files of second in its background dump dest. But the strange behaviour occurs on the first node. I see only Alert log file in the background dump dest . Inspite of getting an error which shows trace file generated but no file occurs in the bdump. The following is the error but physically there no trace file generated:
Errors in file /oracle/db/admin/<sid>/bdump/<sid>j0011558.trc:
ORA-12012: error on auto execute of job 94377
ORA-12008: error in materialized view refresh pathCan anyone have any idea for this strange behaviour. There are no maintenance script for removal of trace files.
Regards,
Imran Khan

ORA-00980:synonym translation is no longer valid
Cause:The synonym used is based on a table, view, or synonym that no longer exists.
Action:Replace the synonym with the name of the object it references or re-create the synonym so that it refers to a valid table, view, or synonym.
Check the following :
From User Number 1 : Osama1
create table osama_table as select empname from scott.emp;
create public synonym osama_tbl for osama_table ;
grant select on osama_tbl to user_b;
From User Number 2 : Osama2
select 1 from osama_tbl;
SMITH
ALLEN
JONES
MARTIN
From User Number 1 : Osama1
drop table osama_table;
From User Number 2 : Osama2
select 1 from osama_tbl;
ORA-00980: synonym translation is no longer valid

I unable to open a file server won't open

Try to open a job application

Hi MTD14S,
What was the format of the url and do you have an example of a website where opening this url failed?
Also I would recommend resetting Firefox. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

ORA-27072: File I/O error, OSD-04008: WriteFile() failure, unable to write

Hi,
Im using oracle 10.2.0.1 on the Windows server 2003,
Every day at 03:30AM my database goes down, with following entry in the alert log.
=======================================================================================
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_lgwr_7708.trc:
ORA-00340: IO error processing online log 1 of thread 1
ORA-00345: redo log write error block 21111 count 12
ORA-00312: online log 1 thread 1: 'F:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCLINT\REDO01.LOG'
ORA-27072: File I/O error
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 33) The process cannot access the file because another process has locked a portion of the file.
Thu Nov 24 03:36:46 2011
LGWR: terminating instance due to error 340
Thu Nov 24 03:36:46 2011
Errors in file f:\oracle\product\10.2.0\admin\orclint\bdump\orclint_pmon_8236.trc:
ORA-00340: IO error processing online log of thread
=================================================================================
We have raised the SR with ORACLE, after uploading the trace & alert log, reply from oracle as follows:
Generic Note
I couldn't find any issue in the trace file.
I think you need to open a ticket to the O/S vendor to identify which process is locking the file.
====================================================================================
We have move the database from F: to G:, problem got resolved, but we cant keep the database in G: for more time as the space issue, We have to move the database back to F: , and we are facing the issue on F:
can any body help, how to monitor the windows process locking the database files,
or the utility that can log the errors at the same time when database goes down.
Thanks,

Hello,
You can have a look to the windows Event Viewer, see if something happens around 03:30.
Do you have an antivirus on your server ?
At what time does your backup run ?
Regards,
Sylvie

Insufficient quota - unable to write to controlfile

I am getting what is probably a typical error using Ora9.201 on Windows 2000 Server. It seems to happen after reboots - rendering Oracle Unavailable.
From trace file...
ORA-00221: error on write to controlfile
ORA-00206: error in writing (block 3, # blocks 1) of controlfile
ORA-00202: controlfile: 'C:\ORACLE\ORADATA\ORA9201\CONTROL03.CTL'
ORA-27072: skgfdisp: I/O error
. repeats this for each of my other 2 controlfiles
OSD-04008: WriteFile() failure, unable to write to file
O/S-Error: (OS 1453) Insufficient quota to complete the requested service.
Restarting in the Service Manager clears it up, but I would like to understand what is going on here.
Thanks,
Steve

If all your controlfiles are damaged you have to use the option befored mentioned by me:
CREATE CONTROLFILE
Caution:
Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
Purpose
Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
All copies of your existing control files have been lost through media failure.
You want to change the name of the database.
You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
Note:
If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database.
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203
Joel Pérez

HELP: flarcreate fails with ERROR: unable to write archive

Greetings,
Having trouble trying to create flar file.
I am using the following syntax, but the -X seems to be ignored and I can't find what the format for that file should be.
appdev03 # flarcreate -n appdev03 -S -H -a "author" -X /tmp/exclude /tools/appdev03.flar
Full Flash
Checking integrity...
Integrity OK.
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
Running precreation scripts...
Precreation scripts done.
Creating the archive...
cpio: "var/tmp/21502_00000001" ?
cpio: "var/tmp/28914_00000001" ?
cpio: "var/tmp/28939_00000001" ?
cpio: "var/tmp/26624_00000001" ?
cpio: "var/tmp/26627_00000001" ?
cpio: "var/tmp/04733_00000001" ?
cpio: "var/tmp/29298_00000001" ?
cpio: "var/tmp/13627_00000001" ?
cpio: "var/tmp/13628_00000001" ?
cpio: "var/tmp/02531_00000001" ?
cpio: "var/tmp/02532_00000001" ?
cpio: "var/tmp/04735_00000001" ?
cpio: "var/tmp/xsauthn" ?
cpio: "var/tmp/27491_00000001" ?
cpio: "var/tmp/08868_00000001" ?
cpio: "var/tmp/08869_00000001" ?
cpio: "var/tmp/20269_00000001" ?
cpio: "var/tmp/20270_00000001" ?
cpio: "var/tmp/27492_00000001" ?
cpio: "var/tmp/xsauthz" ?
cpio: "var/tmp/16103_00000001" ?
cpio: "var/tmp/16104_00000001" ?
cpio: "var/tmp/29964_00000001" ?
cpio: "var/tmp/03913_00000001" ?
cpio: "var/tmp/09305_00000001" ?
cpio: "var/tmp/10454_00000001" ?
cpio: "var/tmp/10505_00000001" ?
cpio: "var/tmp/07839_00000001" ?
cpio: "var/tmp/08129_00000001" ?
cpio: "var/tmp/00574_00000001" ?
cpio: "var/tmp/00694_00000001" ?
cpio: "var/tmp/05611_00000001" ?
cpio: "var/tmp/05612_00000001" ?
cpio: "var/tmp/01281_00000001" ?
cpio: "var/tmp/06672_00000001" ?
cpio: "var/tmp/06674_00000001" ?
cpio: "var/tmp/14242_00000001" ?
cpio: "var/tmp/14243_00000001" ?
cpio: "var/tmp/13904_00000001" ?
cpio: "var/tmp/13924_00000001" ?
cpio: "var/tmp/25133_00000001" ?
cpio: "var/tmp/25159_00000001" ?
cpio: "var/tmp/27648_00000001" ?
cpio: "var/tmp/27649_00000001" ?
cpio: "var/tmp/29284_00000001" ?
cpio: "var/tmp/29287_00000001" ?
cpio: "var/tmp/12637_00000001" ?
cpio: "var/tmp/12640_00000001" ?
cpio: "var/tmp/13947_00000001" ?
cpio: "var/tmp/03944_00000001" ?
cpio: "var/tmp/03945_00000001" ?
cpio: "var/tmp/13950_00000001" ?
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141450.log", errno 2, No such file or directory
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141440.log", errno 2, No such file or directory
22708784 blocks
54 error(s)
Unable to write archive file.
ERROR: Unable to write archive.
my -X file /tmp/exclude is as follows, yet it seems ignored:
appdev03 # more /tmp/exclude
/var/tmp/.oracle
/var/tmp/[0-9*]
/var/tmp/xsauthz
/var/crash
/tlg
/tacp
/depot
/tools
/toolsdb
/development
/opt/orca/var
/usr/local/CAcrypto/cacrypto_solaris.tar
/usr/local/CAcrypto/cacrypto_sun4_solaris.tar
/usr/local/CAcrypto/cacrypto.tar
/var/opt/oracle/jre/jre.tar
/var/opt/oracle/oraInventory.09252003.tar
/var/opt/oracle/oraInventory.10212003.tar
/var/opt/oracle/oraInventory.11032003.tar
/var/opt/oracle/jre.tar
/opt/ca/harvest/harvest.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20-compat.tar
/opt/ca/caiptodbc/odbc511.tar
/opt/appworx/UWClient/web/images.tar
/opt/appworx/jre.tar
/opt/appworx/apache.tar
/opt/appworx/apache_dev.tar
/opt/appworx61/jre.tar
/opt/appworx61/apache.tar
/opt/appworx61/AWjars.tar
/opt/appworx61/AWutil.tar
/opt/appworx61/install/v61/apache.tar
/opt/appworx61/install/v61/awjars.tar
/opt/appworx61/install/v61/awutil.tar
/opt/appworx61/install/v61/jre.tar
/opt/appworx/log/RmiServer1106141450.log
/opt/appworx/log/RmiServer1106141440.log
/emc/2312fcode_2_00_6.tar
the file is there but not sure of its accuracy:
appdev03 # flar -i appdev03
files_archived_method=cpio
creation_date=20110621221025
creation_master=appdev03
content_name=appdev03
creation_node=appdev03
creation_hardware_class=sun4u
creation_platform=SUNW,Netra-T12
creation_processor=sparc
creation_release=5.9
creation_os_name=SunOS
creation_os_version=Generic_118558-39
files_compressed_method=none
content_author=author
content_architectures=sun4u
type=FULL
system is Solaris 9 04/03 with Generic_118558-39 V1280.
plenty of space in the directory being written to and I can touch a file there as well.
Any advise is appreciated, thanks.
Jeff
Edited by: user13021352 on Jun 21, 2011 3:40 PM

What report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion

Administrators unable to write to a text file created by another Administrator on Windows Server 2008.

Why are Administrators unable to write to a text file created by another Administrator on Windows Server 2008?
--- The Administrators already have full control so how do I fix this? ---
Example: On a Windows Server 2008 (SP1): user A (who belongs to the Administrators group) logs in and creates a directory C:\foo and creates a file readme.txt in the foo directory. User B (also a member of the Administrators group) logs in and opens C:\foo\readme.txt in notepad. User B types something and tries to save the file. User B cannot save the file…an option to save as some other file name is presented. The security permissions of C:\foo\readme.txt show that Administrators have full control.
Work around 1: Explicitly add user B to have full control over the foo directory. The problem is that all the all other Administrators still need to be added (current and future).
Work around 2: Change the Users security permission to be full control on the foo directory. (this seems dangerous!)
It is interesting to not that this same procedure is not a problem in Windows Vista. (Any insight about the difference?)
Sincerely,
Ian

so there is no way to change this without literally shutting down the UAC?
I have files that I need to modify all the time, and it is very annoying to have to save as to my desktop modify and then copy and paste the file again.
I would also rather not give myself permissions to the entire C:\ Drive even specified Folders or documents, etc......
You can change these settings without bringing down the UAC

1.    Click Start, type gpedit.msc and press Enter.
2.    Expand Computer Configuration -> Windows Settings -> Security Settings -> Local Policies -> Security Options.

3.    Double-click “User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode” on the right pane.
a.    Choose “Elevate without prompting” and click OK.
b.    Double-Click “User Account Control: Admin Approval Mode for the Built-in Administrator account”, Click Enable, Apply and then OK
c.     Double-Click “User Account Control: Run all users, including administrators, as standard users”,Click Enable, Apply and then OK
Then reboot the Server. You should now have the ability to modify any document, etc....

Unable to delete a file on application server

Hello Experts,
I have gone through couple of post and sample nothing worked that's the reason Iam posting a query here.
Please help me with your valuable suggestions.
I am reading a file from the application server running a BDC program to update my ztable all works fine.
now i wanted to move this file to another folder thats too working perfectly but now when i try deleting the older one it is not getting deleted.
I have closed the dataset and checked the authorization that is not a concern but still it is not getting deleted.
I have pasted the code below.
For READ and CLOSE dataset it returns subrc as 0 but after delete it returns 4.
data : mess type string.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT message mess.
IF SY-SUBRC = 0.
DO.
    READ DATASET ld_file INTO wa_string.
    if sy-subrc eq 0.
        append wa_string to it_string.
        clear wa_string.
    else.
        exit.
    endif.
enddo.
close dataset ld_file.
delete dataset ld_file.
else.
WRITE 'Unable to open source file to move the content'.
endif.
Regards,
Ranjith N

Hello Mr Ghode,
Thaking you for your response on my query.
as you said to handle exception this is what i have done.
kindly verify the same would be of great help.
still iam unable to delete the file.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC = 0.
    DO.
      READ DATASET ld_file INTO wa_string.        "LV_LINE is variable to hold line contents being read
      if sy-subrc eq 0.
        append wa_string to it_string.
        clear wa_string.
      else.
        exit.
      endif.
enddo.
close dataset ld_file.
if sy-subrc eq 0.
try.
    delete dataset ld_file.
    catch CX_dynamic_check into t_ref.
    err_txt = t_ref->get_longtext( ).
endtry.
endif.
endif.
Regards,
Ranjith N

Quicktime would fail to write/export to server windows share with "Error -43: file not found" errors

Summary:
With the combination of Windows 7 and Quicktime 7.x, Quicktime would fail to write/export to server windows share with "Couldn't create output movie storage" and "Error -43: file not found" errors
Steps to Reproduce:
Trying to render to Quicktime files using network shared folders as a destination:
Unable to open file. (-1610153459)
The funny thing: it only happens when there are at least two shared folders mapped on the workstation, and the destination folder used for the rendered movie is not the first one.
If we have only two mapped drives, F: and G: for example, and we try to render something to F:, everything works fine and no error is showed. But, when the destination is the G: drive, rendering never works, the error is showed, but a zero-byte file is created in F: (!!). ODD! If we remap F: drive with a different letter, but a letter BEFORE G:, the problem always happens. If we remap drive F: to any letter AFTER G:, making G: the first available network drive, rendering works. Also, simply unmapping F: and leaving G: as the only connected network folder makes render to work.
We do not have a D: drive in our Windows 7 workstations, they are all C: only.
It is a 100% reproducible problem. We tried with three different Active Directory networks and workstations. It has all of the features of a software bug.
Any help would be appreciated.
Cheers!
Expected Results:
Error -43: file not found
Actual Results:
The workaround seems to be to use the full path to the servers instead of the mapped mount point (ie //server/z/... instead of Z:/...
Regression:
All versions of quicktime 7 in combination with windows 7 client and more than one smb share point mapped in a letter.
Notes:
All software that uses quicktime movie exports showed this error.

Not sure what file your are referencing? Thanks for your suggestion, however, it's not relavant.
It renders fine if you render to either the UNC path or the first mapped drive.
i.e. If you have two mapped drives G: and H:
they both point to \\fileserver\share1\folder
If you render to H: it will fail, if you render to G: it works! Same path, same user, same permissions.
The only difference is H comes after G, so it fails... BUG. If it was to do with anything else, underscores, permissions etc, it would fail on both.

Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

when trying to download new messages into Thunderbird, I keep getting the error message:
Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
what does this mean and how do I correct it???
thanks

I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
The site you recommended is "having difficulties".
May 4
I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

XMII 12.0: Unable to write file...

Hi all,
lately we are facing some problems using xMII. One point is that you can easily move file or folder inside the xMII 12.0 workbench because there is no confirmation popup when clicking on a folder and move it by chance.
Apparently I have moved a folder, and it seems that I produced a Catalog Server Error according to the log. Now xMII seems to be confused, because we are now getting lots of error of the kind "Unable to wirte file..." like this:
Unable to write file D:\usr\sap\MES\JC00\j2ee\cluster\server0\apps\sap.com\XMIIEnterpriseApplication\servlet_jsp\XMII\root\CM/Development/USER/xml/treestructure.xml
Have you already encountered such an error? Is it because of the "/" and "\" signs that are mixed inside the URL? Or could it be the Catalog Error mentioned above?
Thanks for a hint!
Best regards
Michael

Jeremy,
we are using xMII in combination with Adobe Flex. So xMII is going to talk to the database, and Flex as the presentation layer is calling xMII transactions to get the data.
The HTML wrapper that Flex creates and the SWF-Files are stored in the CM folder of xMII so that we can include it in the xMII Portal using the navigation wizard of xMII.
In xMII we have set up a sandbox project, so the file structure in xMII is "xMII-Root\Sandbox\Data" (Catalog) and "xMII-Root\Sandbox\WEB\Data" (Web).
When using the xMII workbench we are importing the SWF-Files into "xMII-Root\Sandbox\WEB\Data". In Flex-Builder we have set up an ant-file that deploys the SWF-Files directly into the "xMII-Root\CM\Sandbox\Data" folder after changing them. However, when only using the ant file, the copied files are gone the next day, when the WebAS restores the contents, I guess.
Using the ant files of course is much easier than using the import feature of the workbench. Maybe you can recommend a better way of deploying?
Best Regards
Michael

Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

Unable to install Windows Server 2012 Feature - [Tools] File Server Resource Manager Tools.
Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
Does anyone have any idea's on why this Feature can not be installed ??
Scott

Hi Shaun
Tried both of your suggestions, however neither strategy worked.
Strategy 1
Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"
Feature un-installed itself during the restart.
Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services". However
this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
PACKAGE SERVICING COMMANDS:
/Add-Package - Adds packages to the image.
/Remove-Package - Removes packages from the image.
/Enable-Feature - Enables a specific feature in the image.
/Disable-Feature - Disables a specific feature in the image.
/Get-Packages - Displays information about all packages in the image.
/Get-PackageInfo - Displays information about a specific package.
/Get-Features - Displays information about all features in a package.
/Get-FeatureInfo - Displays information about a specific feature.
/Cleanup-Image - Performs cleanup and recovery operations on the image.
Strategy 2
Tried installing via powershell, using the following command DISM
/online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
All up back to where I started?

Unable to write to File Server

Similar Messages

Maybe you are looking for