Geturl in specified window

I know how to use the geturl to open up a web page, however,
it opens outside of my flash site.
I would like to create a window in my flash site which is
coded to open the geturl.
How would i go about doing this?
Thanks in advance

Tramaine2004 wrote:
> I know how to use the geturl to open up a web page,
however, it opens outside
> of my flash site.
> I would like to create a window in my flash site which
is coded to open the
> geturl.
> How would i go about doing this?
>
> Thanks in advance
in your flash as if within the SWF file ?
No can do, flash has no browser capabilities.
Regards
Urami
Happy New Year guys - all the best there is in the 2006
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Similar Messages

The system cannot find the file specified.Windows sockets error code:2.

Hi All,
I am on MDM 5.5 SP6.
I am getting the following error message when trying to logging in to the DM.
The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
Runtime Error :
Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
R6025.
-Pure virtual function call.
And in console also the MDM server is stopped after getting the above error message.
Can anybody tell me what could be the problem?
Thanks & Regards
Sireesha.

Hi Sireesha,
According to me, there can be 3 problems,
1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
Along with this, please refer to the link below :
[[The system cannot find the file specified.Windows sockets error code:2.;]
Hope it helps.
Thanks and Regards
Nitin jain

GetURL - javascript - popup window

Hi!
I need to get a button to open a new, fixed-size, pop-up
window.
This is what I used:
on (release) {
getURL("javascript:window.open('ponuda_tjedna.html','Ponuda
tjedna','width=350,height=250')");
It works just fine, opens a new window etc. but the main
window where the button is (where the site is) goes blank, white..
and in the upper lef corner it says: [object Window]. If I click
BACK, it restarts the entire site.
What can I do to keep the main window where it is?
I've also tried writing a function in javascript directly
into the <head> tag of index.html and call the function from
within Flash, using getURL. That did open a new window and the main
site didn't go blank, but in IE nothing happened.
Thanks,
Igor

> on (release) {
>
getURL("javascript:window.open('ponuda_tjedna.html','Ponuda
> tjedna','width=350,height=250')");
> }
>
> It works just fine, open a new window etc. but the main
window where the
> button is (where the site is) goes blank, white.. and in
the upper lef corner
> it says: [object Window]. If I click BACK, it restarts
the entire site.
You need void(0) with window.open because it returns stuff
and if you don't void
the request it will do exactly what it does to you. Not the
case if you are using
NewWindow function. Anyway, try this instead:
getURL("javascript:n_name=window.open('ponuda_tjedna.html','Ponuda_tjedna','width=350,heig ht=250');void(0);");
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

GPO don't run specified windows applications doesn't work to in win 8.1. any ideas why?

GPO "don't run specified windows applications" doesn't work to in win 8.1. any ideas why? it is enabled and list of progs is entered however I can still run all progs on list. This is a local machine not on a domain. I must
have this work to disable games, IE, MSpaint, etc. Computer has been restarted since enabling the GPO and also have enforced the GPO via CMD prompt. worked fine on windows 8 and 7.

Any success ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Screencapture of a specified window

Hello,
Can anyone help me figure out a way use the screencapture command to take a screen capture of a specified window with out take a screen capture of the entire desktop or interactively.
Specifically here is what I am trying to do:
I have a 6 monitors with many different things going. I always have one Safari page open that displays charts and graphs that are displayed in Flash. Because most of the page is a Flash movie, there is no way I can think of to print that specific Safari page to a file without using screencapture. Plus, I need this to be automated.
Does any one know of a way to accomplish this? As always, thank you in advance for any help.
iBook G4 Mac OS X (10.4)

Since I am still getting some follow-up on this, I will consider it answered. I took several tips from people on this thread as well as others on related Applescript threads. Here is what I did, just in case anyone else needs to know.
I made the monitor with the Safari page I wanted to capture my primary monitor. Then I just used the very nice screencapture command that I was inquirying about in this thread, to capture the screen. Next I used an applescript to change the URL of the Safari page so that I could screencapture another Safari page with a flash movie. I used an automator action to download other non-flash Safari pages as PDFs and then combined them all with the built in automator action.
Even though this is the UNIX forum here is the applescript I used and a link to the Automator action just in case anyone ever needs any of this info. In the end I used the UNIX command screencapture, Applescript and Automator to get the job done. Thank you for all the help!
tell application "Safari"
-- get reference to document by url
set d to first document whose URL is "someurl"
set URL of d to "newURL"
end tell
http://www.apple.com/downloads/macosx/automator/downloadurlsaspdfs.html

I keep getting this message "A dublicate file name was specified Windows"

I've tried everything, this has been going on for months, and now I really need help.
I just bought an album on itunes, had to send it to myself as a gift, to make it work. It did, but now I can't download it, because I keep getting this error: "A dublicate file name was specified".
I'm using windows 7.
I really hope someone can help me. The support wasn't very helpful....

Hmm, I'm most familiar with that message in the context of syncing devices when it usual means a problem with the iPod Photo Cache. Any chance of a screenshot of the error message? What exactly do you do before it appears?
Also try this post from b noir, he seems to know most about quirkly iTunes for Windows installs. It may be we need to track down another of his posts that covers how to completely remove iTunes and all other traces of Apple software before reinstalling.
tt2

GetURL spawned new window doesn't have a parent

I have a Flash application that is opening a new window via
getURL.
getURL("
http://www.microsoft.com",
"EMMWindow");
The new window has a link that triggers a javascript that
attempts to redirect the parent window via
opener.location.href='x';
However, when that javascript is called, it returns an error
that shows that the opener is undefined - e.g., the window that was
opened is effectively an orphan - it doesn't know its parent.
Is this an issue with getURL or am I doing something wrong?
Any help would be appreciated.

I think this is an html/javascript issue. I don't think
GetURL is not going to create a child window, just a plane ole
window, so there is no opener associated with it. That window would
have to have been opened by the other window and named EMMWindow
before getURL filled it up with something.
You may have to communicate via javascript to get the page to
open the window as an opener.
Of course, I could be wrong.

Powershell, Open Explorer.exe at a specified window location and specified size

Is it possible for powershell to open explorer.exe at a specified location (i.e. top 0 left 0) and a specified size (i.e height 400, width 600)? There are a number of options for IE but (that I can see or work out none of there transpose into the File
Explorer (also none of the properties (membertype) fit with location or sizing ).

This is not a script question but is a question about how to use Windows programs.
Search for "Explorer command line"
¯\_(ツ)_/¯

Flash pop up window

Hello,
Ive made, what i call, a 'mini site' in flash.
I want this mini site to be opened up from a flash front end,
so when the user clicks on the "lauch site" button, the mini site
opens up over the front end page, and also, so the the mini site's
pop up window size is constrained so the user cannot change the
size of the window.
Im a begginer, so details would be very helpful indeed.
thanks

pleslie wrote:
> Hi: That code does not work in Flash 8. Do you know why?
I can only get it to work if I publish in Flash 7.
on (release) {
getURL
("javascript:n_window=window.open('some.html','newWin','width=400,height=300,left=0,top=0 ,toolbar=No,location=No,scrollbars=No,status=No,resizable=No,fullscreen=No');void(0);");
and make sure you test it on server, not locally
Also, you can remove all parameters set to NO, you only use
them if you want to
set them to YES, NO is the default setting, does not require
to be specified.
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Javascript popups that open in same window causing focus problem

I have been using javascript popups in actionscript buttons
for some time with no issues. However, on a specific movie I have 2
button links, each of which opens a pdf file. I need each pdf to
open using the same new window to avoid multiple new windows
opening.
This works fine on the first link I open - the new window
appears on top of the main window. The second link, however, opens
underneath the main window despite the focus() code. This only
happens in IE - works fine in Firefox.
Code used:
link3_btn.onRelease = function() {
getURL
("javascript:NewWindow=window.open('docs/first.pdf','newWin22','width=700,height=500,left =1
0,top=10,toolbar=No,location=No,scrollbars=Yes,sta
tus=Yes,resizable=Yes');NewWindow.focus();void(0); ");
link4_btn.onRelease = function() {
getURL
("javascript:NewWindow=window.open('docs/second.pdf','newWin22','width=700,height=500,lef t=
10,top=10,toolbar=No,location=No,scrollbars=Yes,st
atus=Yes,resizable=Yes');NewWindow.focus();void(0) ;");
Any help would be appreciated. Thanks.

This is how the code should look:
link3_btn.onRelease = function() {
getURL
("javascript:NewWindow=window.open('docs/first.pdf','newWin22','width=700,
height=500,left=10,top=10,toolbar=No,location=No,scrollbars=Yes,status=Yes
,resizable=Yes');NewWindow.focus();void(0); ","_self");
link4_btn.onRelease = function() {
getURL
("javascript:NewWindow=window.open('docs/second.pdf','newWin22','width=700,height=500,lef t=
10,top=10,toolbar=No,location=No,scrollbars=Yes,st
atus=Yes,resizable=Yes');NewWindow.focus();void(0) ;","_self");
}

How do i use variables for javascript pop up window?

hi,
i want to open a popup window from flash,
as advised before i used this line :
getURL("javascript:NewWindow=window.open('imylink.html','title','width=890,height=660,left =10,top=5,toolbar=No,location=No,scrollbars=Yes,status=No,resizable=Yes,fullscreen=No');
void(0);");
BUT, in flash, the URL that has to be open as do the height
and wdth are stored as variable... imageURL, imageWidth,
imageHeight, since i have quite a few different pages that have to
open and they change. how can i use the values of the variables in
the javascript code??
is it possible at all?

try:

ITunes 10 on Window 7 64 bit copys CD quickly then freezes for 1-2 minutes

I have new and well specified Windows 7 64 bit machine with iTunes 10 installed.
When I copy a CD, it copies very quickly compared to my old XP machine, but when it finshes copying teh last track, iTunes always freezes for 1-2 minutees and then returns to normal useability.
All advice would be appreciated.
Thanks,
Steven Lyall

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Is it possible to install Adobe Web Premium CS5.5 on a Windows 8?

I have purchased Adobe Web Premium CS5.5 as a Student version.
Currently I run it on a Windows 7 PC.
I want to buy a new notebook and wonder whether it is possible to install my Adobe Web Premium CS 5.5 on a Windows 8 PC?
Alternatively, is it possible to use my Adobe Web Premium CS 5.5 on a MAC?

Dear Eshant_Jindal,
thanks for your answer.
And is it possible that I use my current license for a MAC? I am not sure whether I have bought a WIN license or a general license?
I know that the system requirements of Adobe Web Premium CS 5.5 do not specify Windows 8.
This is why I have contacted you. So there is no better answer than “Try it”? Does it work on an average Windows 8 computer? Which system constraints need to be regarded?
As I have not bought the new computer, I could pay attention to any system constraints that could endanger the installation of Adobe Web Premium Cs 5.5.
Best regards
Von: Eshant_Jindal
Gesendet: 25 December 2014 13:49
An: Tobias Mohr
Betreff: Is it possible to install Adobe Web Premium CS5.5 on a Windows 8?
Is it possible to install Adobe Web Premium CS5.5 on a Windows 8?
created by Eshant_Jindal <https://forums.adobe.com/people/Eshant_Jindal> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7043306#7043306>

Error while integrating Windows System - Share into KM

Hi Experts,
I am new to KM and there is a requirement of Integrating Windows System into KM.
Portal System : a.xyz.com
Remote System: b.xyz.com
Share -
b.xyz.com\d_share$
Both systems reside in the same domain and share is created on the remote system which needs to be accessed from Portal. User xyz\Rob has given R/W access to the share.
The steps I followed are:
1. Created a Network Path.
    - Specified Network Path as given above.
    - Added credentials for xyz\Rob
2. Created Windows System in KM Systems Landscape.
3. Created File System Repository.
    - Specified Share as Root Direcory.
    - Specified Windows Landscape System as the system defined in the above step.
    - Security Manger as W2kSecurityManager
Now when I saved it, default trace logs are giving following dump :
#1.5 #000E0CB1BAAE005E0000000E000017F000046821B68B46BA#1240393912559#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###Error mounting drive ,path \\\\b.xyz.com\\d_share$#
#1.5 #000E0CB1BAAE005E0000000F000017F000046821B68B617E#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration (New path) failed to mount network path \\\\b.xyz.com\\d_share$ - com.sapportals.wcm.service.fsmount.RemoteAccessException: Error Mounting Drive: \\\\b.xyz.com\\d_share$
     at com.sapportals.wcm.service.fsmount.FSMountService.mountDrive(FSMountService.java:91)
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:346)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000010000017F000046821B68B6F1C#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration failed to get configuration of network path CaesarNetworkPath - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:351)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
#1.5 #000E0CB1BAAE005E00000011000017F000046821B68B72C8#1240393912575#com.sapportals.wcm.service.fsmount.FSMountService#sap.com/irj#com.sapportals.wcm.service.fsmount.FSMountService#Guest#0##n/a##4bd037e02e7211dec03e000e0cb1baae#Thread[ConfigurationEventDispatcher,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Warning##Plain###FSMountService Reconfiguration Failed to get configuration on network paths to mount - com.sapportals.wcm.service.fsmount.RemoteAccessException:
     at com.sapportals.wcm.service.fsmount.FSMountService.updateConfigurables(FSMountService.java:359)
     at com.sapportals.wcm.service.fsmount.FSMountService.reconfigure(FSMountService.java:286)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToReconfigure(CrtThreadSafeComponentHandler.java:302)
     at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.handleReconfigure(CrtThreadSafeComponentHandler.java:148)
     at com.sapportals.wcm.crt.CrtComponentManager.reconfigureComponent(CrtComponentManager.java:343)
     at com.sapportals.wcm.crt.CrtConfigurationEventListener.notifyComponentConfigChanged(CrtConfigurationEventListener.java:79)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEvent(CmConfigurationProvider.java:1257)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.sendChangeEventOrRestart(CmConfigurationProvider.java:1209)
     at com.sapportals.wcm.repository.runtime.CmConfigurationProvider.configEvent(CmConfigurationProvider.java:302)
     at com.sapportals.config.event.ConfigEventService.dispatchEvent(ConfigEventService.java:227)
     at com.sapportals.config.event.ConfigEventService.configEvent(ConfigEventService.java:112)
     at com.sapportals.config.event.ConfigEventDispatcher.callConfigListeners(ConfigEventDispatcher.java:308)
     at com.sapportals.config.event.ConfigEventDispatcher.flushEvents(ConfigEventDispatcher.java:251)
     at com.sapportals.config.event.ConfigEventDispatcher.run(ConfigEventDispatcher.java:110)
I have gone through the help.sap.com documentation but I found it quite confusing.
Please suggest.
Br,
Nilz

Hi,
Check whether you are able to access the same file share form the Portal server where your J2EE is installed.
And also if you have used
b.xyz.com
d_share in the network path try using //b.xyz.com/d_share in the network path as mentioned here.
https://www.sdn.sap.com/irj/scn/thread?messageID=1283643
Regards
~Hussain

Windows 2008 R2 Standard side by side error

I have a Dell Poweredge 310 running Windows 2008 R2 Standard. I have update the bios to the latest version and the bios update did take but now all of my 32bit software will not run. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail”
I have looked over other posts and most have stated to install the C++ redistribution 2008. I was able to install the 64 bit version but I cannot install the 32bit version. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.”
So I am not able to install any 32bit software. I have tried to enable the WOW64 feature with the command DISM /online /enable-feature/featurename:ServerCore-WOW64 but get this Error: 0x800f080c Feature name ServerCore-WOW64 is unknown.
I have also tried to use this command to setup WOW64 start /w ocsetup ServerCore-WOW64 I get this “The specified windows component could not be found: ServerCore-WOW64.
I have looked at the .Net 3.5 that comes installed in the Windows Features and it is installed. I do not want to uninstall and reinstall the feature because it will take down the AD and I really do not want to rebuild the AD
Is there some setting I am missing?

Airwikg
You can refer the following similar thread solution to do the further troubleshooting:
SideBySide errors event ID 33
https://social.technet.microsoft.com/Forums/windows/en-US/db028072-a3b7-46f5-981e-b40d9f7d0fa8/sidebyside-errors-event-id-33?forum=w7itproappcompat
The application has failed to start because its side-by-side configuration is incorrect’ error related to MMC.EXE programs and weird cause & simple solution
http://blogs.msdn.com/b/cesardelatorre/archive/2011/03/27/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorrect-error-related-to-mmc-exe-programs-and-weird-cause-amp-simple-solution.aspx
Can any kind expert out here help me diagnose what is wrong under event viewer. Details below.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/can-any-kind-expert-out-here-help-me-diagnose-what/8b542c41-a8b6-4f52-adf4-efdfb2378a1a
More information:
About Side-by-Side Assemblies
https://msdn.microsoft.com/en-us/library/windows/desktop/ff951640%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Geturl in specified window

Similar Messages

Maybe you are looking for