Give out dynamic IP only within certain range ...

I currently have the airport express' IP to be 10.0.1.1
Is there a way to tell it to only give out IP addresses in the 10.0.1.100+ range.
I have static IPs set for 10.0.1.2-10 and every time a DHCP client logs in, it kicks off one of these IPs.
any help would be great.

I have static IPs set for 10.0.1.2-10 and every time a DHCP client logs in, it kicks off one of these IPs.
Why not change them to 10.0.1.202-210 ?

Similar Messages

How to select data from excel within certain range?

hi all, i am having an application where i am reading data from an excel sheet. in my case i am taking the date as an input from the user in range i.e starting date and end date in dd-mm-yy format( or to to from)and then i have to read the data of all dates which come between given range by the user....
how can i do it????
can anyone help......
thanks in advance.........

Did you get the solution for your question ?
I have the same requirement,
1. Here, the user will provide the range like maximum and minimum values, then the VI should capture the data within the given range. ( from CSV file as attached )
2. Then VI should calcluate the average value for captured data and export it to excel.
This is my requirement can anyone help me on this.
Many thanks in advance
rc_cks
Attachments:
sample_short.csv ‏2439 KB

How do I print out a picture only within an e-mail. It is not an attachment to the e-mail.

I know how to print out a picture from an attachment but this particular picture is included in the body of the e-mail and that's where I'm lost.
Thanks, June

Hi
Its a pleasure ....Say Thanks by Clicking on Kudos
Click the KUDOS star on the left to say 'Thanks'

Blackberry email give out "No entry" symbol

Hello,
Blackberry email give out "No Entry" symbol on certain emails. Model phone is blavkberry Q10. There is no issue with my service provider. Just some emails cannot send out and having the symbols. Many thanks in return to whom could provide the solution to this.

what email provider?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Getting last-day-of-week dates within certain date range

Hi all,
I have the following Challenge:
I want to know the dates of the last day of all the weeks within a certain range of dates.
For instance if my range would be 01-jun-2002 - 31-jun-2002
then the returned days should be (lastday of the week is sunday):
. 02-jun-2002
. 09-jun-2002
. 16-jun-2002
. 23-jun-2002
. 30-jun-2002
I want to accomplish this by only using sql (no pl/sql) in a ora 8.0.x rdbms
How would I do this? (if it's possible)
Tia,
Martin

Christian's solution returns
01-JUN-02
08-JUN-02
15-JUN-02
22-JUN-02
on my system. The first day of the week is dependent on NLS settings.
SELECT MAX(realdate)
FROM (
SELECT TO_CHAR(TO_DATE('31-may-2002','dd-mon-yyyy') + ROWNUM,'IW') weekno,
TO_DATE('31-may-2002','dd-mon-yyyy') + ROWNUM realdate
FROM all_objects
WHERE rownum <= TO_DATE('30-Jun-2002','dd-mon-yyyy') - TO_DATE('01-Jun-2002','dd-mon-yyyy')
GROUP BY weeknoThe IW format model give ISO standard week numbers and a week always starts on Monday.

I have an array in which I want to check and see if it falls within a certain range with about 7 different ranges. I have tried the range and coerce function but something is going wrong.

Also, I have a timer that lets me know how long the trigger has been active. I want to know if it is possible if that time would be reset everytime the trigger goes off.
Attachments:
Code.vi ‏113 KB

1. Do not run using the Continuous Run button! This is intended only for certain types of trouble shooting and not for normal operation.
2. Put a while loop around your entire program. Add a stop button wired to the stop terminal of the loop.
3. Then you can replace all the feedback nodes with one shift register with the input expanded to five elements. Sum the three bottom ones for your averaging.
4. Nothing is wrong with the In Range and Coerce. You should only check it when you have data. That is what the Data Available output from Trigger and Gate is for.
5. I am not sure what you want to reset for your timer or exactly when, but it should be possible.
6. I did not try to figure it all out but you may not need the timer while loop once you wrap the loop suggested in 2 around the rest of the code. You may be able to move the shift registers to the outer loop.
Lynn

All the data that is equal within a certain range to be defined as equal in array

Hi, I need to get some help!
In edge detection, I get the result of all edges found in an array. When two or more edges is found close to eachother, I need to get them defined as one edge found.
As an example, if the VI locate 10 edges, but 5 of them is close to eachother within a certain range, there will be only 6 result on the output.
I'm quite new to Labview and will appreciate any sort of help

I think I need help to solve the problem from scratch. As you can see in the picture it has been detected several edges in the middle of the picture. To the right in the picture you can see the array showing the Y-position of each edge detected. I need all edges that is within 30 pixels to eachother to be considered as one edge, and then compute the new array showing the position of the edges.
Attachments:
example.JPG ‏95 KB

Best practice for having an access point giving out only a specific range

Hey All,
I have an access point which is currently set to relay all dhcp request to the server DC-01, However the range that has been setup is becoming low on available IP addresses so I have been asked if it is possible to setup another range for the AP only.
Is there a way to set the DHCP up with a new range and say anything from that access point it will then give out a 192.168.2 subnet address as apposed to the standard 192.168.1 subnet?
Or would it be easier / better to create a superscope? and slowly migrate the users to a new subnet with a larger range?
Any help suggestions would be appreciated
thanks
Anthony

Hi,
Maybe we could configure a DHCP superscope to achieve your target.
For details, please refer to the following articles.
Configuring a DHCP Superscope
http://technet.microsoft.com/en-us/library/dd759168.aspx
Create a superscope to solve the problem of dwindling IP addresses
http://www.techrepublic.com/article/create-a-superscope-to-solve-the-problem-of-dwindling-ip-addresses/
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

How to give browse and monitor only options of an ICM script to a certain group?

I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

Hello Praveen,
This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
Thanks.

Counting the number of pixels in a certain range within an ROI

I am using Vision 6.0 for Visual Basic.
I would like to get a count of the number of pixels within a particular region whose value falls within a certain range (e.g., the number of pixels with values between 86 and 255).
Can anyone tell me how I can do this?
Thanks.

bep -
Have you looked at the Histogram example? It should be under the Analysis directory wherever the examples are.
After doing the Histogram like the example does, you will have a CWIMAQHistogramReport object (let's call it HistogramReport) that contains the result of the Histogram. To access the 1-dimensional array containing the count in each bin, use the Histogram property on the CWIMAQHistogramReportItem that the HistogramReport contains.
To use this array, however, you will need to assign it to a variant. So, to find the number of pixels that are in the 5th bin (with the default options, this will be the pixels that have exactly the value 4), do
Dim Histogram As Variant
Dim HistogramReport As New CWIMAQHistogramReport
CWIMA
QVision1.Histogram2 CWIMAQViewer1.Image, HistogramReport
Histogram = HistogramReport(1).Histogram
' Now Histogram(5) contains the number of pixels in the 5th bin.
Let me know if this helps.
Greg Stoll
IMAQ R & D
National Instruments
Greg Stoll
LabVIEW R&D

Telnet can't figure out route to host, but only on certain ports?

This only occurs under 10.5. In 10.4.11, I can hit the server on both ports through telnet.
telnet <server> 510
Trying <server>...
telnet: connect to address <server>: Connection refused
telnet: Unable to connect to remote host
telnet <server> 80
Trying <server>...
Connected to <server>.
Escape character is '^]'.
fetch
HTTP/1.1 400
Date: Sun, 06 Jul 2008 03:06:15 GMT
Content-Type: text/html
<html><head><title></title></head>
<body>
fetch: 0
</body></html>
Connection closed by foreign host.
Here's the strangest part:
ping <server>
PING <server> (ip): 56 data bytes
ping: sendto: No route to host
^C
--- <server> ping statistics ---
1 packets transmitted, 0 packets received, 100% packet loss
How come it can figure out the route when using port 80, but not when using port 510? And is the inability to figure out the route the reason why Wireshark shows ZERO outgoing packets on port 510 when it fails to connect?
And why only on certain IPs? If I use "edu.yorku.ca", I can connect via telnet on both 80 and 510.

orangekay wrote:
So it works if you supply a FQDN but not an IP? Are you certain that the IP you're using is valid? There may be some DNS trickery going on behind the scenes.
No, it only connects when I hit the server on port 80. Using IP or FQDN doesn't seem to make a difference.
If I try to use Network Utils to do a trace route, it too says no route to host.
I've got a G4/ppc running 10.4.11 attached to the same router, and it has no issue hitting the server on any port, and can do a trace route as well.

How do I get this loop to give me numbers within a range?

So for a school assignment I need to get a loop to display all the numbers in a certain range. This range is input by the user with a starting number and an end number. For some reason when i put the code in all its giving me is the end number and not the numbers between the start and end. I was wondering if someone could show me what to tweak to fix it. This is the code so far...
// Add event listener
submit_btn.addEventListener(MouseEvent.CLICK, onClick);
function onClick(event:MouseEvent):void {
// Declare Variables
var startInput:String;
var endInput:String;
var startNum:Number;
var endNum:Number;
// Get Start Value from Text Field
startInput=start_txt.text;
// Convert value from string to number
startNum = Number(startInput);
// Get End Value from Text Field
endInput=end_txt.text;
// Convert value from string to number
endNum = Number(endInput);
// For loop
for (var range:int = startNum; range <= endNum; range++ )
response_txt.text = "The numbers between the inputed integers are " + range + "!";
I've also include the actual program so you can see it if you want to test it..
Thanks for your help,
The Student of Flash

Being that you're a student and this is an assignment, I have to honor what I believe the intentions of the assignment are, which is for you to solve it and get it working, not for someone else to hand you the solution. But I can offer a hint...
It's not a question of slowing it down, it's a question of controlling what gets written to the output textfield when. If you did the trace you saw that it was rewriting the textfield in each loop. So just as a hint, look up the appendText() method of the TextField class.

How to only allow certain users to use internet?

Hello, I've recently taken over the job of overseeing the internet connection here in my building. We have a shared internet connection and I was told to just give out the same WEP key to everyone. The problem now is that many people have canceled, but the WEP key still works. I want to make sure that only people paying for the service are using it. What is the best way of doing this?
1. Generate new WEP keys? I think I can only generate 4. Is there a way of generating more?
2. Block certain "Device Numbers" or "mac addresses?"
I really know very little, so any help would be really appreciated.

change the wep key first and then go to the go to the wireless and then on wireless network access (on the set-up page of your router) and click on the button select MAC address of networked computers and it will display the mac address of the client's that was able to connect using the new key and so you can just easily copy it on the permit only MAC address box to flter the connectoin. So it's much easier than askign each 1 of the client's for the mac address.
Do this right after dissemnating the new wep key to the clients,

"Battery serial does not validate", but the number is within the range

My sister came home from abroad for Christmas, and I checked her PB 12-inch battery serial number. Her battery has the serial number ZZ3480FJPVEA as far as I can see. This falls into the replacement range:
12-inch
iBook G4 A1061 ZZ338 - ZZ427.
On the exchange page, Apple writes: "If the first 5 digits of your battery’s 12-digit serial number fall within the noted ranges, please order a replacement battery immediately." But the battery serial does not validate even if I replace the zero with the letter "O".
Are there batteries within the range that still are ok?
Ingmar
PowerBook G4 12-inch Mac OS X (10.4.8)

I could not post an answer to the topic without marking the question
"answered", though it wasn't!
Strange, because the question is not marked as answered and it is not necessary to mark it in order to reply (simply click on the "reply" link near each post you want to reply to).
However when you feel that your question is answered - or the forum cannot be of further assistance - mark the question as answered and maybe also give some final notes.
If you got helpful replies, then you may award the posters by granting points. You can do so by clicking to "helpful" and "solved" buttons appearing near each post (you need to be logged in).
The buttons mean what they state: "Helpful" in the sense of user gave a useful answer or further information allowing you to solve an issue with some work of your own. "Solved" means that this post of the user is mainly responsible for managing an issue.
You can only mark one posting as "solved" in a thread, and - I hope this is correct - two or three times marking posts as "helpful". With the last, I'm not sure, you may have a look at "Help & Terms of Use".

Set Cell or Row to read only if certain condition is met

Greetings,
As the subject suggest, I need to set Cells or Rows to Read Only or "Gray out" If Certain attribute doesnt contain any value.
The requirement is to search for records of certain range and display it in the table. And the records will not be editable (read only) if certain attribute/field of the record is NULL. In another words that particular row will be gray-ed out.
Right now I am able to extract out the range of records out and display it in the table but I am not able to set the display of the records/ rows to read only. Do note only certain row needs to be set to row only depending on a particular attribute.
I was to code these in WDDOMODIFYVIEW()... anyone have any solution to this? Points will be given of course. ")

Please dont use the DOMODIFY method for such changes.
The Properties mapped to the context are designed for exactly this purpose.
Your context node should be extended with another attribute. Eg attr_y_Read_only.
The read_only or enabled attribute of field y would then be mapped to this attribute.
Depending on cell editor type it may be called enabled or read only.
You then set this new attribute to true or false appropriately for each element in the node.
This new attribute, although inside the node, need not be displayed as part of the table.
It is there to help control fields in the each element.
Regards
Phil.

Give out dynamic IP only within certain range ...

Similar Messages

Maybe you are looking for