GL_JE_HEADER table : Posted date not update properly
Hi All,
I have seen that for few of the journals created inside GL, The posted date inside the GL_JE_HEADER table is update with a date instead of time stamp.
i.e the posted date column is updated as '7/08/2013' instead of '7/08/2013 4:40:39 AM'
This has caused some problem in te system.
was wondering if you could help me to get an answer for this.
regards
Amit
i am thinking that you want to include the time when you query the column post_date from table. if you are using SQL*Plus the default display for the date does not include the time. to include the time when you do a select on any data column use the ALTER SESSION SET NLS_DATE_FORMAT command.
e.g.
SQL> select sysdate from dual;
SYSDATE
18-SEP-13
SQL> alter session set nls_date_format = 'dd-mon-yyyy hh:mi:ss am';
Session altered.
SQL> select sysdate from dual;
SYSDATE
18-sep-2013 11:57:17 am
SQL>
Similar Messages
-
Data Not Updating Properly in CUBE
Hello Experts,
There is one critical issue which i am facing in FI - CO scenario. please provide your inputs.
we have a requirement to generate PNL statement report from FI - CO. means the values for Revenue, COGS must be come from FI and Operating expenses like Sales and Marketing, Research & Development, General Administrative must come from CO.
we took two Data Source 0FI_GL_10 and other is 0CO_OM_CCA_9. the entire data flow for FI is 0FI_GL_10 --> 0FIGL_O10 --> 0FIGL_C10 --> ZFICO_M01 and the entire data flow for CO is 0CO_OM_CCA_9 -->ZCO_C01 --> ZFICO_M01. i have initialized data for both the data source. and for delta i have created process chain on hourly basis because our customer runs the report hourly basis means they post some entries in FI and they wanted to see it in BI after an hour.
Now when we load delta records on hourly basis . all entries are not coming means some are missing. but if we check it after 24 hour then it will be come in cube. but after an hour it is not coming.and in that i case i have to refresh entire BI means delete all the data from BI and then load init again and all.
are there any settings in ECC (R/3) side so that we can have right records in BI ?
Regards,
Komik ShahHi Komik,
When there is a process chain to load the data on hourly basis. It would reflect the data in the cube. If u still found the problem then u have to check the process chain in which the info packages have been added. I don't thinks there is a ABAP program for this.
Regards,
Rahul. -
Jazz-n data not updating properly
Hi All,
Jdev 11.1.1.4.0
I am having problem in adf security in Jdev
I have configured adf security in my application, and i am adding users and some roles for them.
While running the i cant see the deployment log in Jdev that the users are updated to weblogic.(because of that its giving incorrect username and password)
But i can see those logs in some sample application, but its not in my application.
why its not showing deployment log while adding in JDev ? any suggestions please..
thanks,
Gopinath JayavelGopinath J wrote:
why its not showing deployment log while adding in JDev ? any suggestions please..Don't know, but you can verify the security deployment in WebLogic by logging in to the WebLogic Application Console (http://localhost:7001/console) by navigating to Security Realms >myrealm >Users and Groups -
Planning area data not updated in infocube in APO system
Hi all,
User is uploading a flat file using addon program to an infocube 1, from this infocube data for sales forecast KF is getting transferred to a planning area KF using standard program RTS_INPUT_CUBE. I can see the updated data in Planning book (which refer the same planning area) data views. In planning book the sales forecast data is also getting copyied to second KF 'Arrangement FC' and its correct.
Now there is a infocube 2 (second) which is getting data directly from this planning area (infocube also contains both KFs). But When i checked this infocube 2 , the updated data is availabe in Sales forecast KF , but arrangement forecast KF is having old data only and user is running query on second KF , so he is getting wrong report.
Since there is no data flow for this infocube 2, and it is getting data from planning area, I feel its remote infocube.
I have also found the datasource for this planning area but don't know how to move further to find why data is not updating properly? Please help on this.
I have information that 2 weeks before data was properly updated, but this time data is not updated,
system version is SAP SCM 4.0Hi Vivek
it is advisable to run the background jobs when the planning books are not being accesses by the users to prevent such inconsistencis. Hence i would advise you to run the jobs durng non-working hours. and if you have a global system, then you may restrict to run the jobs based on regional levels.
in addition, it is also a good practice to run consistency jobs before and after your have completed the background jobs. i hope you are using process chains to execute the sequeuce of jobs. if yes, then you can add consistency check jobs in the process chains.
some of the consistency check reports are :
/SAPAPO/OM17 - liveCache Consistency Check
/SAPAPO/TSCONS - Consistency Check for Time Series Network
/SAPAPO/CONSCHK - Model Consistency Check
and so and so forth..
you can find these conssistency jobs under APO Adiminstration --> Consistency checks in APO.
let me know if this helps.
Rgds, Sandeep -
Hi Guys,
I have a With CTE table expression ,this cte gets the value from startdate and enddate
I need to insert this startdate and enddate into a table ,while inserting into table,i got the below error,
Derived table 'Datematrix' is not updatable because a column of the derived table is derived or constant.
below is the query i used,
declare @StartDate date='01/01/2013'
declare @EndDate date='12/31/2013'
;WITH Datematrix(AllocationDate)
As
SELECT @StartDate AS AllocationDate
UNION ALL
SELECT DATEADD(D,1,AllocationDate) AS AllocationDate
FROM Datematrix WHERE AllocationDate<@EndDate
Insert into Datematrix(AllocationDate)
select * from Datematrix
any guys update this solution.
Thanks
Bhupesh.R;WITH Datematrix(AllocationDate)
As
SELECT @StartDate AS AllocationDate
UNION ALL
SELECT DATEADD(D,1,AllocationDate) AS AllocationDate
FROM Datematrix WHERE AllocationDate<@EndDate
Insert into Datematrix(AllocationDate)
select * from Datematrix
Hello,
Your CTE bases only on fix value = @StartDate , not on a table/view; here do you want to insert data to? This don't work in any way.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Shockwave will not update properly
Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
Help!I understand the two sites are using different plugins/players. I'm not an idiot. However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
From: SeanWilson <[email protected]>
To: RB Jones <[email protected]>
Sent: Sunday, March 8, 2015 2:34 PM
Subject: Shockwave will not update properly
Shockwave will not update properly
created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
TRM-TM TABLE "DIFT_POS_IDENT" IS NOT UPDATED
When I create a money market transaction, the table DIFT_POS_IDENT is not updated.
Only the securities transactions are updated in the table. I want to know if this is the
correct situation or I can config it in IMG.What is the scenario you are executing ? This table belongs to Transaction manager in the treasury module. This group might not be apt. There is a seperate group for treasury and risk.
-
Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
i might need walked through on a few things if they are too complicated.Have you:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If a PC
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
Data not updating in table ,data transfered using DTW
Hi Everybody,
I had transfered data using DTW, it shows that data imported,but it not updated, that means it not shows in database.
So please so me any solution to this.
Regards,
SrinivasHi suda,
I am giving he detailes of the BusinessObject
BusinessObject =oUserLanguages
template=oUserLanguages.csv
i had copied the oUserLanguage.csv file and entered data into it and saved it(comma deliminated)
steps:
1.i had selected oUserlanguage object from list.
2.i had selected source file (oUserLanguage.csv )
3.the data properly matched and data is displayed when source tab is pressed. and ields are properly matched.
4.three check boxes are checked.
5.i had seen the message you are sucessfully specified required information for imporing data
6.in lost step it shows like below
Total: 2 business object(s)
2 business object(s) imported successfully
0 business object(s) not imported
0 business object(s) updated successfully
0 business object(s) not updated
7.in log files status shows succeeded
But I had cheked the languages , the data imported not shown.
Regards
srinivas -
Hi experts!!
I am using BAPI_ACC_INVOICE_RECEIPT_POST to post a document. When I post a document through the t-code FB01 or F-43, it's being posted by even updating the table WITH_ITEM. When I post through BAPI_ACC_INVOICE_RECEIPT_POST, it's posting document and updating WITH_ITEM table also, but the values being updated are wrong. Below is a brief explanation on my problem:
When I give VAT entry, then QSSHB in BSEG will be the result after the VAT is deducted (DMBTR of the header entry subtracted DMBTR under VAT entry). And the same value will also be updated in WITH_ITEM field WT_QSSHB.
When I use this bapi, it is not being calculated bu the same DMBTR under header entry is coming as WT_QSSHB, which is wrong.
The way to solve this is to calculate by some logic, but I am not sure whether this is the correct way to approach. I couldn't find any calculation done in standard FB01, though I debugged it.
Can anyone help me out? Or any other bapi which meets my requirement will also be so helpful.
Thanks a lot.
Edited by: abapdev on Jun 1, 2009 10:38 AMHi,
once the document posted thru bapi, check with fb03 whether a new line item is created for with holding tax. And check the tax amount is deducted from vendor line item.
Regards,
Ravi. -
Bdoc received but data not updated
Hello,
I am using CRM4.0
I changed the customizing in table CRMC_ACT_DECOM to change values of field KV_DEKO.
Then, I transported the modification usign R3AS4 to CDB.
I can see that the table CDBC_ACT_JOURN is updated correctly with the new values.
My problem is that I don't see the modification on MSA. When I try a select on this table, i just see the old values.
It tried to do an extract on replication object CRM_DNL_ADOCCH for my site, the bdoc is well sent and I can see the new data in it, but even after synchronisation, the data in MSA is not updated...
What am I missing ?
(the strange thing is that I didn't have this issue in dev environnement)
Thanks in advance,
EDIT : ok when I launch this query in query analyser :
SELECT *
FROM dbo.CDBC_ACT_JOURN
WHERE FIELDNAME = 'KV_DEKO'
I get all the data.
But when I am using the query in SQL Server entrerprise management, I don't see them !!
Edited by: Louis-Arnaud Bouquin on Nov 10, 2009 10:26 AM>
sujith golla wrote:
> Status of the IDOC is "53", so successfully posted
> records that have the status can NOT be reprocessed using BD87
There are some tricks: you can either create a copy of the IDoc in WE19 and then process it or use report RC1_IDOC_SET_STATUS (be careful though) to update the IDoc status.
However, you might want to do some more research and use suggestions above before resorting to these measures. -
Actual GoodsIssue date not updated
Hi
We have a problem in Actual PGI date. For few documents system is not populated the actual PGI date in it's field, later we are able to complete the billing etc.
This is only an incident. What will be the reason, why it is not populated, what will be the data we can check for it, let me know at the earliest.
Thanks in advance
Venkat.Hi Venkat,
As you may be aware that when PGI is done, a Material Document is generated which have all the details like Posting Date, Item posted , movement type and also includes an Accounting Document ( since material inventory accounts are updated at the time of PGI)
Please note your Material Document number from document flow and view it in MB03. Check the Posting date there.
The Posting date is stored in field BUDAT of the Table MKPF.
Try to analyze with this detail.
Hope this helps you.
Reward points if found useful.
Regards,
Gaurav Raghav. -
Table record is not updated correctly after navigate back from detail page
I have 2 jspx pages one (page A) has a table displaying the employee record, another one (page B) is used to update the selected employee record. On page A, when selecting a record and clicking the 'Details' button I can be navigaed to pag B on which I can modify the record information in a form component. I have one table column 'teamName' which is binding to a LOV at VO layer and on pageB I am using <af:inputComboboxListOfValues> to show a editable LOV list for this attribute, when I input a new value here and save it, I can go back to page A but the team name for this record shows empty, by querying the database I do find the record updated successfully with the changed value. And when I reloaded the page the record can show the new team name value. Why it is not updated in the employee table when immediately navigating back from page B? I have set the table iterator refresh attribut to "always" but still failed. Can anyone help on this issue? Thanks!!
BTW, for other columns (not LOV) they are ok, the table can show the changed value correctly.
Edited by: user774592 on Jul 14, 2011 7:56 PM
Edited by: user774592 on Jul 14, 2011 9:59 PMThanks for reply!
I did exactly the same as what you said. I d&d the data control Commit operation on page B to generate a 'Save' commandToolbarButton with the action attribute set to 'save' which is the from outcome for navigating back to page A. Is there any business logic I need to write here? Currently I have no.
Note: In this case I used an editable LOV, I have a requirment that besides selecting a existing value from the lov, user can also input a new value in the LOV. When going back to page A, I do find the LOV list is updated to contain the new vaule. Just the record in the table shows an empty value instead of the new value. Still do not know why. -
Data not updating from psa into Data Targets
Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regardsAre you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB -
Items are not updating properly in DP90
Hi,
As per my requirement , i have to add the items from sales order created by DIP profile. It is updating only one item instead of three when i ran the transaction DP90 with Sales order number and Posting date to. I have passed the required data to ET_DLIA and ET_DLIV1 tables while using the exit 'EXIT_SAPLAD15_005'.
Can any body suggest me if i miss any required input data to above mentioned tables.
Regards,
SK.879035 wrote:
Hi,
I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
The Sales Order header information i was able to enter & generate the Order Number.
R12.1.3 is the version i am using.
Thanks,
Chandra.Have you done all the required setup in OM??
Like system parameters...Imp one would be Item Validation Organization
Make sure item is also available in the price list which you are using in order
Mahendra
Maybe you are looking for
-
IPhone 6, Prius, Bluetooth Calling -- Not Working
I got the iPhone 6 (AT&T). I was able to pair the phone with my Prius (2013 - Plugin Hybrid), and I am able to play audio via Bluetooth, but Bluetooth calling doesn't seem to work. If I try to make a call from the phone, I get no audio (the car displ
-
when i connect my iphone 4s to my windows 7 pc, it says the device has timed out so cannot connect. what do i do? i need to transfer music from my pc to my phone but it wont connect. please help, thank you!
-
Format-number,decimal not giving desired output for PO Print report XSL-FO
Hi All, My requirement was to get the Unit price in european format which is 10.000,00 Iam getting it as 10000,00 but the client needs the thousand's seperator. if have used the decimal seperator but iam getting the Unit Price value as 'NAN' when i s
-
Goods receipt not possible for delivery 800001597: error code 4
Hi, When doing goods recipt for outbound delivery in MIGO, I am getting the below message: Goods receipt not possible for delivery 800001597: error code 4 When going in details of error messgae: For error 4 : Check the delivery and its document . Doc
-
Does Aperture work on my RAW or JPEG files?
When using Aperture only one image appears, although both RAW and JPEG are stored originally. What am I actually editing, RAW or JPEG? How can I tell what is happening? Thanks