Glpibr() in Posting running long in General Ledger.

Normally when two periods are open glpibr() runs a bit longer than when just the current period is open. Now with two periods open glpibr() has started taking more time than usual. Is it because two periods are open and there might be lot of records which are getting processed? Also we run the posting programs in parallel.Due to this if one of the program is in glpibr() then the other will have to wait before its glpibr() can start. But is there a reason for gap between glpibr.concurrency() and glpidb() that is once glpibr.concurrency() completes;glpidb() does not start immediately. Earlier when two periods were open this time interval used to be 8 to 12 mins but now it has incerased to 13 to 17 mins. Is it becuase records processed might be more? Please let me know.

974156 wrote:
Normally when two periods are open glpibr() runs a bit longer than when just the current period is open. Now with two periods open glpibr() has started taking more time than usual. Is it because two periods are open and there might be lot of records which are getting processed? Also we run the posting programs in parallel.Due to this if one of the program is in glpibr() then the other will have to wait before its glpibr() can start. But is there a reason for gap between glpibr.concurrency() and glpidb() that is once glpibr.concurrency() completes;glpidb() does not start immediately. Earlier when two periods were open this time interval used to be 8 to 12 mins but now it has incerased to 13 to 17 mins. Is it becuase records processed might be more? Please let me know.Duplicate post -- Posting Program performance issue in General Ledger
Please update your other thread instead of creating a new one.

Similar Messages

Posting of CarryForward New general ledger

Hi financial wizards,
our client uses new general ledger. The accounting block has been extended with some ZZ user fields carrying results determined via substitution exits during posting.
The additional customer fields are added to the accounting block and are stored on item level (BSEG) as on aggregate level (FAGLFLEXT).
After the run of transaction FAGLGVTR - 'Balance Carryforward (New)' we have the correct values in the carryforward column of the target account, but values from customer fields are not transfered.
SAP will not help us with a note at this time; the features may be integrated in a later release.
Now my question: How to post the carryforward values manually or by program? I know the SAP Carryforward does not create any documents but after the run the Carryforward period (period 0 in former times) is filled with the sums of previous years P+L accounts. Carryforward works correct i.E. for profit center but not for the additional clients fields.
We need some good ideas as how to overcome this obstacle.
Regards,
Clemens

Dear Peter,
I am afraid that you are mistaken. There is lot of difference between the New GL Accounting and COPA. They are entirely different and its utility is also different.
Here in New Gl, Characteristics means, segment characteristics, for example, business area, profit center, functional area, segment.
Trust this answers your query!
Cheers,
Ashok SINGH

ACCOUNTING IDOCUMENT CREATED FROM XI IN R/3 NOT CREATING GENERAL LEDGER

Hi,
When accounting document created through the message type ACC_DOCUMENT we are using basic type ACC_DOCUMENT01 for posting the document in inbound process accounting document gets created in r/3 side but without updating the New General ledger (FAGLFLEXA) but suprisingly it gets populated only in Classical Ledger..
1. What needs to be done on XI SIDE so that it starts posting Documents to NEW GENERAL LEDGER (FAGLFLEXA).
2. We also need to update the New General Ledger (FAGLFLEXA) Table for the postings made earlier.

Hi Pradeep,
to get a response to your post you will have to provide more detail for this scenario and explain clearly where it fails.
Regards
XI/PI SDN Moderator

BAPI for General Ledger Accounting.

Does anyone knows if a BAPI or function that can create and posts documents for GL (general ledger accounting) exists?
I have been looking on the BAPI explorer but I'm not sure is one of the Bapi's listed under GL can do that.
I wrote a program using a batch input for trans FB01 but when process the session found some inconsistencies. The behavior of the the screens and fields is different when I process the BI session as when I did the recording.
So I decided to find a BAPI that can do that instead of a Batch Input.
Any help will be appreciated,
Orlando.

Hi Orlando,
Check if this can serve your purpose
BAPI_ACC_GL_POSTING_POST
Regards,
Ravi

Special Purpose Ledger & Special General Ledger

Hi Experts
Is there any difference between Special Purpose Ledger & Special General Ledger. If so please give me some real time examples.
Points will be rewarded.
Sincerely,
Ali Abidi

Dear Ali Abidi:
The Special General Ledger is making refence to special accounts like "Down Payment" used to issued operations that could not be posted to the "normal" general ledger accounts. And in the other side, the Special Purpose Ledger is a Ledger different from the usual ledger used in FI. The special purpose ledger is into R/3 but I think that the main difference is that the first is an account and the second is a ledger used for special purposes. I have not got a reference of time but we can think that the Special General Ledger is an special account used at any time and the Special Purpose Ledger is a separate ledger used when it is required. The difference I think is not in "time" but in the "substance".
I hope being clear for you. If you needed a time reference I could try find it.
Your Sincerely
Leonardo Lopez

Transfer to General Ledger Process

Hi All,
I am new to Financial and need to run "Transfer to General Ledger" process. I don't see this process in 12i in Payables manager, but its available in 11.5.10 instance. Is there a name change or am I looking at the wrong responsibility.
Thanks in advance.
Thanks
Kumar

The above mentioned Note is giving lot much information.
Still you may want to look at the following too.
http://www.orafaq.com/node/2241
http://www.orafaq.com/node/2240
By
Vamsi

Payment accounted in AP but not posted in General Ledger

Helloo everyone,
I have an issue.
Some Payments have been accounted in AP. However when querying the account in General ledger nothing is found.
As you can see from the above Accounting has been processed and GL date is 26 Feb 2015, However same information cannot be found in GL.
Grateful if anyone can pinpoint me to scripts or oracle docs to resolve this issue as it is impacting on the reconciliation process.

Hello,
Normal: the transfer to GL request was run on 05 Mar 15
Now, let us look for the corresponding Batch Name and Journal Entry Name in GL
Please, in the lines shown in print screen you posted, click the + (show) icon for cash accounting class:
Under General ledger header you should see Batch and Journal Entry Names:
If these values are populated in SLA, then search them directly in Enter Journals from (General Ledger Responsibility) and update this discussion
Thank you

F.05 Posting for general ledger account .......[Error]

Hi expert,
I am running a transaction in F.05 and encounter several error messages such as:
1 Incorrect account determination: ABC 11111 >> No performance Assistant message
2 Enter account number with a maximum of 10 characters No performance Assistant message
3 Posting for general ledger account 11111 amount >>
Performance Assistant message prompt:
Posting for general ledger account 11111 amount 199,999.00 set in batch input
Message no. FR008
Diagnosis
In an evaluation that affects the financial statements, the posting for company code ABC and G/L amount 199,999.00 SGD, could not be carried out.
System Response
The posting is entered in a batch input session.
Procedure
Correct the error, for example, missing account determination, and run the batch input session. This ensures that the posting and the evaluation difference noted in the documents agree again.
Please advise.
Thank you!

1. Financial Accounting (New) > General Ledger Accounting (New) > Periodic Processing > Valuate > Foreign Currency Valuation.
Check your settings
2. Check if how you have defined you account groups in OBD4. Most probabaly you have defined 10 digit account length.
3. Check if the document type is relevent only for batch input.
Rgds
Harmees

Running AP transfer to General Ledger: Complete with Error

Below is the error I got while trying to run : AP transfer to General Ledger and I got Complete with Error:
Starting concurrent program execution...
+-----------------------------
Arguments
p_selection_type='1'
p_set_of_books_id='1'
p_include_reporting_sob='N'
p_batch_name='jginv'
p_from_date='2007/01/01 00:00:00'
p_to_date='2008/12/31 00:00:00'
p_accounting_method='Accrual'
p_journal_category='A'
p_validate_account='Y'
p_gl_transfer_mode='D'
p_submit_journal_import='Y'
p_summary_journal_entry='N'
p_debug_flag='N'
p_trace_flag='N'
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
LOG :
Report: c:\oracle11i\visappl\ap\11.5.0\reports\US\APXGLTRN.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Sob_Ids
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
MSG MSG-00004: After Get_Base_Curr_Data
MSG MSG-00005: Calling Transfer Request
MSG MSG-00005: After calling Transfer Request
MSG MSG-00100: Error occured in Insert_Liability_Balance
MSG MSG-00101: Error Code :-20100
MSG MSG-00102: Error Message :ORA-20100: File o0059033.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log.
ORA-06512: at "APPS.FND_FILE", line 396
ORA-06512: at "APPS.FND_FILE", line 499
ORA-06512: at "APPS.AP_TRIAL_BALANCE_PKG", line 1252
MSG MSG-00005: Insert_Liability_Balance Failed.
MSG MSG-00000: User-Defined Exception
ERR REP-1419: 'beforereport': PL/SQL program aborted.
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2748532.
Review your concurrent request log and/or report output file for more detailed information.
Jon

Remember that this problem is from Vision training database and not real life productionIt does not matter whether you have a Vision demo database or fresh database installation.
The APPLPTMP directory does not even exist- Open a new DOS session
- cd c:\oracle11i\visappl
- Run envshell.cmd
- Type "echo %APPLPTMP%", does it return something?

Bapi for posting FI documents for new General ledger accounting

Hi,
We have a requirement for posting FI documents for new General ledger i.e for transaction FB01L. Is there any BAPI for the same so that BDC can be avoided.
The BAPI "BAPI_ACC_DOCUMENT_POST" is used for FB01. Can we use it for FB01L?? As in this BAPI ledger group field is not there. Please suggest.
Thanks in advance.
Regards,
Gaurav

Hi Sandra,
Solved myself using the below options.
If you are using the BAPI - BAPI_ACC_GL_POSTING_POST, you can pass accounting principle field in importing structure BAPIACHE08. The relation between Legder group & accounting principle has to be configured in SPRO by FICO consultant. Once they configured in the system, get the accounting principles and then pass the accounting principle .
Code: s_documentheader-acc_principle = wa_header-acc_principle.
Reward me if this will help you.
Thanks,
Yerukala Setty

General Ledger Posting Error (GLT2 051) No accounting transaction variant

Hello SAP Gurus-
When testing lockbox in FLB2, I received the following error message:
General Ledger Posting Error (GLT2 051) No accounting transaction variant assigned to FB01/ /LB
We are on ECC 6.0
I created a new Document Type LB
I created a new G/L account for Lockbox clearing and AR
How do I fix this?
Thank you!

Hi,
Assign a transaction variant for the document type you created in Transaction code GSP_VZ3. Also, make sure that the GL accounts affected are assigned with item categories in GSP_LZ2.
Thanks
Aravind

Error 131-85 when trying to run general ledger report.

Hello when I try to run the general ledger report in SAP 8.8 I get the following error:
Data is not available; modify the selection criter and re-enter [131-85]. I used to be able to run the report no problem, and I can also run it under other users and my test account with the same criteria and am ok. Can anyone help?

Hi Jessica.....
This error generally comes when your Selection Parameters are not OK.
Please check the parameters or select all for from and to date period.....
Also please check whether to that particular user Accounts are accessible or not for generation this report....
Regards,
Rahul

No accounting rule despite posting to general ledger ERP

Hi expert,
I create a securities transaction and faced this message in TBB1.
No accounting rule despite posting to general ledger ERP
Message no. TPM_TRAC1509
Am I miss somethings in configuration? Thanks for any support!

Hi tap nguyen,
You have to maintain accounting principle in SPRO - Corporate Finance Management - Transaction Manager - General Settings- Accounting - Organization - Assign Accounting Codes and Valuation Areas.
Regards
Gouse

Please help how to undo the post in general ledger?

dear all,,
please help me ?
we have R12 Orcale.
I made a post in general ledger for closing purpose ??
now I want to undo post whatever I posted should return back as it is ??
how I can do it ??
for more clarification
for closing the account period we went to the general ledger than post journal after that we select the period name than we select find ?
after find I made tick to all the transactions there than I posted ?
my question How I can cancel the post or undo and keep it as it is ??
please help

A posted journal batch can not be deleted, You can reverse it to nullify the accounting effects of the posted journal batch.
refer MOS note:
Can a Posted General Ledger Journal Entry be Deleted? [ID 135532.1]
regards,

General Ledger Accounting (New): Line Items 0FIGL_O14 Performace issue

Dear Forum,
We are facing a performance issue while loading the data to 0FIGL_O14 General Ledger Accounting (New): Line Items from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO.
Please see my requirement below for updating the data to 0FIGL_O14 DSO.
This report is generated to display Dry Dock and Running Repair expenses for the particular Purchase orders with respective G/L's.
1) The G/L DSO will provide us the 0DEBIT_LC and    0DEB_CRE_DC Foreign currency amount with signs (+/-) amounts and.
2) ZMMPRC01 Cube   will provide us the 0ORDER_VALUE (Purchse order value)and    0INVCD_AMNT Invoice amount.
While we are loading the data from CUBE ZMMPRC01 -> ODSO 0FIGL_O14 DSO ,we have created nearly 19 InfoObject level routine to derive the below mentioned fields data for MM Purchase Order related records.
0CHRT_ACCTS    Chart of accounts
0ITEM_NUM      Number of line item within accounting documen
0AC_DOC_NO     Accounting document number
0GL_ACCOUNT    G/L Account
0COMP_CODE     Company code
0COSTCENTER    Cost Center
0CO_AREA       Controlling area
0COSTELMNT     Cost Element
0SEGMENT       Segment for Segmental Reporting
0BUS_AREA      Business area
0FUNC_AREA     Functional area
0AC_DOC_NR     Document Number (General Ledger View)
0AC_DOC_TYP    Document type
0POST_KEY      Posting key
0PSTNG_DATE    Posting date in the document
0DOC_CURRCY    Document currency
0LOC_CURTP2    Currency Type of Second Local Currency
0CALQUART1     Quarter
0CALYEAR       Calendar year
For reference Please see the below logic to derive the data for PO related record.
DATA:
      MONITOR_REC    TYPE rsmonitor.
$$ begin of routine - insert your code only below this line        -
    ... "insert your code here
    types : begin of ty_FIGL,
                CHRT_ACCTS type /BI0/OICHRT_ACCTS,
                ITEM_NUM type /BI0/OIITEM_NUM,
                AC_DOC_NO type /BI0/OIAC_DOC_NO,
                GL_ACCOUNT type /BI0/OIGL_ACCOUNT,
            end of ty_FIGL.
    data :it_figl type STANDARD TABLE OF ty_figl,
          wa_figl type ty_figl.
    SELECT single CHRT_ACCTS
                    ITEM_NUM
                    AC_DOC_NO
                    GL_ACCOUNT from /BI0/AFIGL_O1400
                      into wa_figl
                      where DOC_NUM = SOURCE_FIELDS-DOC_NUM and
                            DOC_ITEM = SOURCE_FIELDS-DOC_ITEM and
                            /BIC/Z_PCODE = SOURCE_FIELDS-/BIC/Z_PCODE
                            and
                            /BIC/Z_VOY_NO = SOURCE_FIELDS-/BIC/Z_VOY_NO
                            and
                            FISCYEAR = SOURCE_FIELDS-FISCYEAR.
    if sy-subrc = 0.
      RESULT = wa_figl-AC_DOC_NO.
    ENDIF.
    clear wa_figl.
Please note the same kind of logic is applied for all the above mentioned fields.
Here is my concerns and issue.
For the all above all routines i am referring BI0/AFIGL_O1400
DSO and finally loading to the Same DSO(BI0/AFIGL_O1400
The worried part is my DSO 0FIGL_O1400 is currecnly having nearly 60 Lacks records and MM cube is having nearly 55 requests which are required to update to the Above DSO for PO related PO value and Invoice amount.
The big issue here is while uploading data from MM cube to DSO say for example if the request is having 25,000 records from this nearly 500-600 records will be updated to DSO.
But here it is taking huge time ( nearly 3 days for request ) for updating these records , like this i have to pull 50 more requests from Cube to DSO as per the requirement.
Please note as of now i haven't created any indexes on DSO to improve this loads.
Please note am facing this issue in Production environment and need your help ASAP.
Thanks & Regards,
Srinivas Padugula

Hi,
If selecting data from 0FIGL_O14 is taking long time then you can create secondary indexes on DSO.
0FIGL_O14 would be huge as data volume directly corresponds to data volume in BSEG.
But for you requirement, I think what you can do is,
1. create multiprovider on top of DSO and Cube and create Bex report to give you the fields requried from both the infoproviders, you can then use open hub or APD approach to keep the data in the staging table or direct update DSO and then load the data to the DSO
2. Create secondary indexes on DSO so that fetching would be faster.
3. Do the enhancment at R/3 level to fetch fields from MM during load of G/L
Regards,
Pravin Karkhanis.

Glpibr() in Posting running long in General Ledger.

Similar Messages

Maybe you are looking for