Gnucash startup "cannot find default values"

I keep getting the error "cannot find default values" when launching gnucash 2.4.8-1.
I tried "Setup" and "update search path" and "install into home directory" options, but neither of them seem to fix the problem - the error message keeps reappearing after launching gnucash.
Any idea how to fix this?

I am using FM10 in Windows 8 (I occasionally get this error whenever adobe products are updated on my machine)
If you work in a more controlled environment (Federal Subcontractor with administrative controls everywhere), I contact my IT department , or if you have the administrator rights, perform the following steps:
Launch command prompt as administrator.
Type “appwiz.cpl” press enter
Right mouse click on Adobe Acrobat Pro and select change
Select repair and click next.
If necessary enter administrative credentials when requested.
Reboot workstation

Similar Messages

How to find default value of a column ?

hi , alok again,
i have to find default value of a column.
Acutally i have found , column's max width, its nullability, precision, scale, type, but NOT default value.
I will have to use the default value and nullability while validating user's input.
ResultSetMetaData doesnot contain any method any such method...
Pls help,
how can i do so.
Any idea will be highly appreciated.
Thanks in adv.
Alok

Hi,
After you get the resultset from DatabaseMetaData.getColumns() as shown by sudha_mp you can use the following columns names to retrieve metadata information:
Each column description has the following columns:
TABLE_CAT String => table catalog (may be null)
TABLE_SCHEM String => table schema (may be null)
TABLE_NAME String => table name
COLUMN_NAME String => column name
DATA_TYPE int => SQL type from java.sql.Types
TYPE_NAME String => Data source dependent type name, for a UDT the type name is fully qualified
COLUMN_SIZE int => column size. For char or date types this is the maximum number of characters, for numeric or decimal types this is precision.
BUFFER_LENGTH is not used.
DECIMAL_DIGITS int => the number of fractional digits
NUM_PREC_RADIX int => Radix (typically either 10 or 2)
NULLABLE int => is NULL allowed.
columnNoNulls - might not allow NULL values
columnNullable - definitely allows NULL values
columnNullableUnknown - nullability unknown
REMARKS String => comment describing column (may be null)
COLUMN_DEF String => default value (may be null)
SQL_DATA_TYPE int => unused
SQL_DATETIME_SUB int => unused
CHAR_OCTET_LENGTH int => for char types the maximum number of bytes in the column
ORDINAL_POSITION int => index of column in table (starting at 1)
IS_NULLABLE String => "NO" means column definitely does not allow NULL values; "YES" means the column might allow NULL values. An empty string means nobody knows.
SCOPE_CATLOG String => catalog of table that is the scope of a reference attribute (null if DATA_TYPE isn't REF)
SCOPE_SCHEMA String => schema of table that is the scope of a reference attribute (null if the DATA_TYPE isn't REF)
SCOPE_TABLE String => table name that this the scope of a reference attribure (null if the DATA_TYPE isn't REF)
SOURCE_DATA_TYPE short => source type of a distinct type or user-generated Ref type, SQL type from java.sql.Types (null if DATA_TYPE isn't DISTINCT or user-generated REF)
Regards,
bazooka

Cannot find default font

Hi,
When booting I can see the message "Cannot find default font" just below the Arch logo. Nevertheless everything works fine afterwards but it's an annoying message that started appearing just a few days ago after I changed the consolefont in rc.conf to lat10. Can anyone help me to get rid of it?
Thanks

I also thought that that was the problem, but my rc.conf is right:
LOCALE="es_ES.utf8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Madrid"
KEYMAP=es
CONSOLEFONT=lat0-16
CONSOLEMAP=
USECOLOR="yes"
I have another computer with the same settings and the message does not appear.

Cannot find default repeat settings for iPod nano 6th generation

Previous individual with problem last year had this problem and was told to go to the setting to set repeat defaults. When I go to settings I cannot find a setting for repeats anywhere. I have a couple of subscribed podcast that seems to always repeat. Can anyone help?

The repeat setting can be found from the Nano's Now Playing screen. While playing a track, swipe to the left to bring up additional controls including the repeat and shuffle settings. See page 21 of your iPod's User Guide for more assistance on the repeat setting.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock

Cannot find metadata values in workflow queue

I need some help customizing workflow action menues in WF_INQUEUE_LIST.
What I´m trying is show actions depending on a customized metadata value.
I´m able to put certain javascript code in order to modify standard behavior if conditions involve workflow metadata (i.e. wfStepName, wfName) but what i need is doing the same based on custom metadata (i.e. xMyMetadata).
I have been looking for some information in doc but functions like wfCurrentGet or GetValue don´t work.
I´ve created a custom component with an html resource overwriting setup_workflow_action_popups.
Basically is the same code that original. There´s only a little change: in the Approve Link creation section I have put this code (is stupid i know)
+<$exec rsAppendNewRow("PopupProps")$>+
+<$exec setValue("PopupProps", "label", lc("wwApprove"))$>+
*<$if strEquals(dWfStepName, "TheStepName")== true$>*
*<$exec setValue("PopupProps", "function", "javascript:{alert('Workflow Step is <$dWfStepName$>');document.Approve_<$dID$>.submit();}")$>*
+<$else$>+
*<$exec setValue("PopupProps", "function", "javascript:{alert('Step is not desired one but <$dWfStepName$>'); document.Approve_<$dID$>.submit();}")$>*
+<$endif$>+
+<$exec setValue("PopupProps", "ifClause", "AllowReview")$>+
+<$exec setValue("PopupProps", "class", "workflow")$>+
+<$exec setValue("PopupProps", "id", "workflowApprove")$>+
This change works. But i need make the action depending on a custom metadata value i.e. xMyCustomMD
*<$if strEquals(xMyCustomMD, "")== false $>*
*<$exec setValue("PopupProps", "function", "javascript:{alert('<$xMyCustomMD$>');document.Approve_<$dID$>.submit();}")$>*
+<$else$>+
*<$exec setValue("PopupProps", "function", "javascript:{alert('Value not find');document.Approve_<$dID$>.submit();}")$>*
+<$endif$>+
I am not capable of retrieve the value of xMyCustomMD
How can i get access in this page to this metadata?
Thank you very much
Edited by: user9510270 on 28-feb-2011 7:52
Edited by: user9510270 on 28-feb-2011 7:53
Edited by: user9510270 on 28-feb-2011 7:55
Edited by: user9510270 on 28-feb-2011 7:56
Edited by: user9510270 on 28-feb-2011 8:01

Can you check what metadata you can see?
I gathered that you have an access to dWfStepName, and dID, but not to other metadata values - sounds like the values you can see are taken from workflow temporary files and if you want to have all the metadata of the item you will have to run a search query to get them. I would suggest to follow to other workflow screens (workflow_review_frames template), because there it is possible to see all metadata and you can get an idea what needs to be done.

Cannot find default Portal error iView DedicationAlerter

Hi,
I would like to have the default portal error iView collapsed as per default to avoid showing a long stack trace. The path to the default iView can be set here:
a.      Choose System Administration -> Support ->Support-Desk -> Portal Runtime -> Workload Distribution Configuration.
b.      Click on folder Workload Distribution Configuration.
c.      Go to edit mode for service DistributionConfiguration.
d.      In the field Default Alert iView Name enter the desired iView path and click on Apply.
I can see here that the current default error iview is called: com.sap.portal.supportability.isolde.DedicationAlerter
But where in my PCD can I find this iView so that I can either change a property on it or make a copy to customize? I have done a PCD search and it does not seem to exist.
Or is there another way I can accomplish the same? I know about the Visual Admin settings like DEVELOPMENT_MODE and DetailedErrorResponse but the problem is that they also remove the first line of the stack trace. I would still like to display that line to help support.
Br Jan

From the setting as you have mentioned previously I think it is directly calling the portal component.
Probably you can have you custom component name in there and see. (download the existing par, do necessary modifications and upload with a different name)
Regards,
Mahesh

GNUCASH STARTUP PROBLEM (solved)

Hi friends,
I installed gnucash and its working fine. However, whenever I start gnucash, it gives me a message:
Cannot find default values
The configuration data used to specify default values for gnucash cannot be found in teh default system locations. without this data gnucash will still operate prperly but it may reque some extra time to setup. do you wish to setup the configuration data?
Then if i click "skip," my gnucash file is loaded. When I click "setup" it takes me to the configuration thing and gives me the option to choose method
[code]
1. Update search path
This method will modify the file .gconf.path in your home directory. it will add the gnucash instal directory to this path so that gnucash can find its default settings and their descriptions.
2. Install into home directory
This method wll install the gnucash default settings and descriptions into the .gconf directory within your home directory. the disadvantage to this method is that future updates to gnucash will not update your local settings to add in new keys.
[code]
I chose the first method and it updates the search path and adds the following line in ~/.gconf.path
[code]
xml:readwrite:$(HOME)/.gconf
xml:readonly:/opt/gnome/etc/gconf/gconf.xml.defaults
[/code]
But any when i start gnucash, its the same annoying stuff..
Any help guys.
Thanks in advance
Ravi S Ghosh

ravisghosh wrote:snowman, i guess there is a bug or something with second release 2.0.2-2. It was working fine, but yesterday when I started gnucash, I was amazed to find that 1 year worth of data was gone and now I have data only till December 2005. Startup was normal. There was no problem at all. Also, in few accounts, data older than Dec 2005 is also not there. Do you have any idea bout this. I'm clueless. how can all the entries go just like that..
I'm sorry to hear about that .
I don't know what could've happen. I don't use gnucash. Are you sure the data was there (with 2.0.2-2) before you realised that it was gone? Maybe the data is still on your hard drive but gnucash can't find/display it.
I've practically done no changes to gnucash 2.0.2-2. All I did was rebuild g-wrap against guile 1.8 and then rebuild gnucash against that rebuilt g-wrap. I only changed the location of the gnucash man pages so that shouldn't affect the user's data.
A few days ago, I've uploaded a gnucash 2.0.2-3 to fix the problem that you described in the 1st post of this thread. That version has more changes in it. You could back up your data and upgrade to gnucash 2.0.2-3 to see if it makes a difference.
I don't really know what more to suggest.
Snowman

Core Data, how default value is set @ XCode 4

Hi,
I updated XCode to 4.
Then, in core data modeling mode, I cannot set default value.
I couldn't find "default value" column. (only "Attribute" and "Type")
Where has it gone?
Message was edited by: Rascal3
Message was edited by: Rascal3
Message was edited by: Rascal3

In the upper right corner there is a set of buttons with the label "View" and three buttons, the one on the right has a tooltip, "Hide or show the Utilities", and this is a quick way to slide the panel you are looking at in and out. I can't figure out if I can include a picture.

A question about assigning a default value

Hi guys, I have a question about assigning a default value to a Numeric Decision CO. This Co needs 2 parameters to compare with each other. I wanna assign para1 during runtime and para2 during design time, but I have no idea how to assign a default value to para2 during design time. Can anyone help me solve this question? Thx a lot.
BTW I`m searching an article about Time-off example`s "details". I have read several articles about time-off example, but those are not detailed enough. I wanna know about all details of COs. Can anyone forward such article to me, plz. Thx again.^^

Hi,
You can assign a default value to the parameter of a callable object.
First attach your CO to an Action.At the action level you can assign default values to the CO Parameters.
Select the action in the design time.
Select the parameters tab for that action.
Select the required paramter. At the top, you can find Default value tab, with that you can assign default value.
I think you can achieve your requirements with Business logic CO better.
[Business Logic CO|http://help.sap.com/saphelp_nwce10/helpdata/en/44/3d3936c5c14a8fe10000000a1553f6/content.htm]
Thanks

What is the Best Approach for System Defined Fields and Default values

Hi ,
Please let me know that what can be the best approach for providing a Default value for the System defined fields when creating a User and How can we hide the System defined fields at the time of User creation

You cannot provide default values for any attributes defined in the FormMetaData.xml file. You can only provide default values for fields defined in the User Defined Fields and supply a default value.
You can using entity adapters to populate some of the values, but you must supply an Organization because there is an entity adapter that you cannot modify that verifies the organization name.
-Kevin

How to find a default value to AutoComplete Control

Hi,
I am using AutoComplete control where i populate it with data from an oData service
var control= new sap.ui.commons.AutoComplete({
displaySecondaryValues: true,
items: {
path: "/",
template: new sap.ui.core.ListItem({text:"{NAME}", key:"{HOSPITAL_ID}", additionalText:"{STATE}"})
This is my implementation in fragment and in on after rendering I want to bind a default value to it.How can I achieve this?
for e.g.:
In drop down box I can achieve this with the below code
_myController.dropDownBox.bindProperty("selectedKey","HOSPITAL_ID");
I tried with similar approaches for AutoComplete control but I cannot bind value to it..Anyone can suggest a possible solutions please?
Best Regards,
Amala Suganya

Hi,
if you want to display default value in AutoComplete then you can do it as below,
                var oAuto1 = new sap.ui.commons.AutoComplete("TextField-1", {
                                tooltip: "This is an Auto Complete TextField",
                                change: onChange,
                               value: aData[5].name,
                                maxPopupItems: 2,
                                ariaDescribedBy: "MyDesc",
                                ariaLabelledBy: "MyLbl"
value property is used to display default value. alternatively you can use setValue method.
also refer this example AutoComplete - sap.ui.commons
Regards,
Chandra

After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on "get more search engines" I cannot find Google or Bing or -

Problem with search
After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …

I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
All default search engines are now available.

Default value in Find field of CRMD_ORDER

Hi folks,
Is there a way of changing the default value of the Find field in the Find tab of transaction CRMD_ORDER to the value "1 All"?
Many thanks for your help.

Hello Steve,
Did you try setup settings of this window using extras ->settings ? If you check field 'open last transaction last processed' than will be open last processed message.
Also check this post http://scn.sap.com/thread/1362888 maybe if you can use crm_dno_monitor with variant or solman_workcenter tcode (it depends of solman version).
BR,
SAPFan

TS2570 Hi, MacBook Pro & Snow Leopard- startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode, and finally trying to get to archive&install the o/s, but it cannot find the destination volume. IsAn erase the only

(10.6.8 Intel core duo 2009)
Hi,
I have a grey screen and grey rotating wheel startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode (which gave a subset of the errors that 'disk repair' did- namely- 'invalid sibling link,invalid record count, invalid node structure, invalid key length) and finally trying to get to archive&install the o/s, but it cannot find the destination volume. Is an erase the only option? PS I have backed up most files individually, but my daughter did not back up any from her user account. Any help would be appreciated. J

Gray, Blue or White screen at boot, w/spinner/progress bar
Why is my computer slow?
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

IBook G4 cannot find system after update to 10.4.8 the first startup

Hi,
I recently updated the iBook G4 of my girlfriend from Mac OS X 10.4.6 to 10.4.8. After restart the iBook showed up the icon for not being able to find a system to startup from. I then turned the iBook off and turned it on again, now the iBook started up just fine from the previously updated system.
But since then, every time the iBook becomes started up it's the same procedure: First it cannot find a system to start up from, then we turn the iBook off and on again and then it starts up just fine. Any ideas why?
Additonally, we now found some error with disk utility on the start up disk. I started the iBook from an 10.4.6 installation disk, checked and repaired the disk. The checked it again, no error found anymore... Started up from the iBooks hard drive, checked with the disk utility from the 10.4.8 system there and this one found error again. Does this make sense?
Any ideas are really appreciated!
Regards, Canubis
PowerBook G4 15'', iMac G3 333MHz Grape Mac OS X (10.4.4) Cinema Display 20", .mac, highlighted keyboard

Go to System Preferences > Startup Disk and reselect the system you want to use to startup the computer and then select Restart which should resolve the startup problem.
Started up from the iBooks hard drive, checked with the disk utility
from the 10.4.8 system there and this one found error again. Does
this make sense?
Not sure if this is considered a bug but this has been reported by others which you can ignore.
I use Disk Utility from the Startup volume to repair disk permissions only, never to Verify Disk which you shouldn't use to check the boot volume for any directory errors with Disk First Aid repair via Disk Utility when booted from your Tiger install disc either.
When doing so, better to select Repair Disk right off the bat and if no problems are reported, you are done. No point in selecting Verify Disk to verify again.
If a problem is reported via Verify Disk and you run Repair Disk to repair the problem and if successfully repaired, no point in running Verify Disk again in this situation either. Best to run Repair Disk only and if any problems are reported and successfully repaired, run Repair again until no problems are reported which saves a step/time and is more efficient.
http://www.thexlab.com/faqs/durepairfns.html

Gnucash startup "cannot find default values"

Similar Messages

Maybe you are looking for