GOODS RECEIPT IS NOT COMPLETE FOR ITEM

Dear Friends,
Created Repai Order having sublet (external service) and then did complete purchase process for same. I have crated PR / PO did Goods recipt for whole quanity and also did invoice for this PO.
Now when trying to do blling getting error GOODS RECEIPT IS NOT COMPLETE FOR ITEM.....
Also in dosument fow its showing PR / PO / GR nos.
But in STAS OVERVIEW showing Goods Receipt as OPEN
any suggetions ???
Regards

Hi
In transaction code you are checking and whats excat error message system is giving ?
You can tick Delivery Completed" Indicator in PO and see whether it helps ?
Check
Kishor Rudani

Similar Messages

Goods Receipt is not completed but Outbound deliveries are getting create.

Hi,
I have a Cross Dock issue.
In cross dock scenario, after completing inbound process, outbound delivery needs to process.
in our case there is batch job running in the background, which is creating Outbound deliveries without completing the Inbound process.
This should not happen. Customer getting confused with this process,
process as follows:
SO-> PR-> PO-> Inbound delivery-> MIGO.
then we go to VL10C and create the Outbound delivery.
i check the availability check at delivery level, all setting are correct.
Please letme know what setting needs to be done for this, to restrict this process.
We need output like, 1st GR needs to be done , then using VL10C, outbound deliveries needs to create.
awating for your help.
Br,
Hari.

Hi...Krishna,
Can you explain the process for Inbound delivery creation.
Rgds

Good Receipt (movment type : 161) for a PO (PO with Return items) -- Error

Hi,
When i post a good receipt (movment type : 161) for a PO (PO with Return items), i have this Error Message :
" Account 61522200 requires an assignment to a CO object "
Note : in this GR i have already : Profit center, Funds center and Order (CO objects)
So please what could be the reason ? and how to resolve it ?
Please advise
Regards.

Please check first the field status of the account in FS00. If this account requires CO object as mandatory then check whether a cost element is created or not , this error normally occurs when CO object is mandatory but relevant cost element is not created.
(or)
Goto OKB9 : The u201CChage View u201CDefault account assignment: Overviewu201D appears. Enter the company code, cost element, and default cost object. The cost object could be a cost center, internal order or profit center.
Edited by: m_n_novice on Sep 2, 2009 5:51 PM

Goods Receipt PO (Service Type) for generate accruals

Hi,
Just wonder that Service type of Goods Receipt PO possible write to the G/L or not? for item type of Goods Receipt PO, it can generated accruals.
I want to generate accruals by Goods Receipt PO., else how am i going to generate accruals?
Thanks.
Regards,
Danny

Subject is discussed in this link with no answer
Generating Accruals from Service type Goods Receipt PO's

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

WM staging of materials not completed for entire quantity

Hi all,
I get this warning when I try to stage materials for a production order:
WM staging of materials not completed for entire quantity
The system allows you to continue with the process but in the end you find that some of the materials are not staged and you may need to create regular TOs for them.
Can anyone suggest how I can fix this problem??
Thank you very much.

Hello,
Please try setting the Complete material staging indicator for the PP interface via:
SPRO->Logistics Execution->Warehouse Management->Interfaces->Define Porduction->Whse Number --> For you warehouse, tick the complete matl staging indicator.
SAP helps do state that " When the system generates transfer orders for transfer requirements from production (PP), this indicator controls whether a complete staging of materials must take place. This means that the system must generate transfer orders for the total quantities of all items in the transfer requirement."
So hopefully, this should help.
Thanks,

"Post Goods Receipt" is not allowed in VL32N

Hello,
I have a problem with GI in VL32N for an Inbound Delivery with several HU's.
The message I get is:
"Post Goods Receipt" is not allowed (HU 1835717)
What I have already checked:
1. The status of all HU's in this delivery seems to be correct
2. All HU's are assigned to the delivery
3. There was already an Inbound delivery created with reference to the Purchasing document (in our case Scheduling Agreement).
4. There was never a HU with the same number before in the system.
5. Inbound Delivery seems to be properly packed
Now I have no idea what to do.
Any suggestions appreciate.
Regards,
Grzegorz

Thanks a lot for the suggestion.
I put the breakpoint in the FM STATUS_CHECK and noticed it raises a STATUS_NOT_ACTIVE event after the following query:
READ TABLE JEST_BUF WITH KEY MANDT = MANDT OBJNR = OBJNR
STAT = STATUS BINARY SEARCH
TRANSPORTING INACT.
The field values are
OBJNR HU0001835716
STATUS I0512
which is strange as it point on a different HU then one visible in the error message.
On the other hand I have no idea where to find I0512.

"Post Goods Receipt" is not allowed (HU 2023125)

HI,
I want to post goods receipt (VL32N) the batch with HU but there is a error log ""Post Goods Receipt" is not allowed (HU 2023125)
". Could any one tell me what happen and how to fix the error ?
Thank's & Regards,
Saiful arif

Hi!
I have the same problem, but in my case it is because I have one HU with 2 subordinated HU. I have created the OT for the main HU, and when I try to post good receipt, It show me this error:
"Post Goods Receipt" is not allowed (HU 362640)
Message no. BS007
Diagnosis
The current status of object 'HU 362640' prohibits business transaction
    'Post Goods Receipt'.
Procedure
To process business transaction 'Post Goods Receipt', you first have to
    change the status of object 'HU 362640' to allow the transaction 'Post
    Goods Receipt'.
This gives you an overview of the system and user statuses that affect
    the transaction. A transaction can only be executed if there is at least
    one status that allows it and there is no status that forbids it.
Transaction analysis"
Please, do you know what can I do???
I can't chage the HU subordinated status, how can I do that???
Thanks a lot!

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

Error "Data packet not complete; for example, 000013" when reading from PSA

Dear all,
I have an issue with my data loading, when i execute my infopackage, i specify that it should be loaded into PSA before going to the data target. in my infopackage request i notice that i have got missing data package
e.g.
Data package 1 : everything OK
Data package 2 : everything OK
Data package 3 : everything OK
Data package 8 : everything OK
Data package 10 : everything OK
Data package 12 : everything OK
Data package 13 : everything OK
what happen to data package inbetween e.g. DP4, DP5 etc etc?
In my "step by step analysis" under the status tab everything is green and nothing seem to have went wrong, no short dump, no job cancelled, nothing.
Since everything "seems" to be alright, when i try to update subsequently to the data target, i get the following errors below.
Data packet not complete; for example, 000013
Request has errors / is incomplete
I got 2 questions here...
1. why do i have missing data package and it still showes me a green idicator?
2. how can i solve this and is this something i should be worried about?
Thank you very very much!

Hii SCHT,
you encounter these type of errors rarely...
but in RSMO screen, check for any TRFCs struck..
also go to the JOB in Source System and analyze the JOBLOG,
there you can find some information about what tht particular job did..!!!
and after that check for the same in the BW system...
perhaps while transferring?extracting the recordsthrough data packages, it might have missed ..
Force the request RED and repeat the IP again...
you dont need to worry about anything...simply force the request red and reload.. just let us know if the problem still persists after repeating the load...
Regards
Prince

LSMW Sales unit ****** 1 is not defined for item 000000 2

Hi, all,
I am trying to create order using LSMW with
Object 0090 Sales documents
Method 0000
Program Name RVINVB10
Program Type D Direct Input
The issue is at the Sales Unit.
I prepared the unit as PC in the folloiwng 3 fields
ZIEME      Target quantity UoM
VRKME      Sales unit
MEINS      Base Unit of Measure
But get the following error, any thoughts?
                               Start of processing
                               V1                   384
Sales unit ****** 1 is not defined for item 000000 2
Data from this document has not been saved ***

Alright Koffer,
I'll give U the place, from where this error can occur, check which is applicable to you:
1) In FV45PF0M_MARM_SELECT, after calling the FM MATERIAL_READ.
2) In Include, FV45PF0V_VBAP-UMVKZ_ERMITTELN, after calling the FM : MATERIAL_UNIT_CONVERSION.
3) In Include FV45PF0V_VBAP-VRKME_PRUEFEN, after material unit conversion.
4) In Incl. FV45PFAP_VBAP_FUELLEN_MAAPV, after call to the FM : F4_ALLOWED_QUANTITY_UNIT.
If U understand German( Ich Keine Deutsch lernen ), U might go to these programs and check the description.
However, all these point to the Sales Unit as U already know.. check all the data related to the Sales Unit and whether this unit is allowed for the material being used.
Rgds,
Raghu.

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

When I download Adobe free trial, download completed, then no more information pop up, why? I mean it is not complete for installation yet.

Flash was designed for computers with cooling systems, it runs fine on my single core Atom netbook even.
The new iOS devices come with dual core Atom-like A4 netbook processors, but atlas! no Flash.
It's because Flash needs cooling and those iOS devices don't have it.
So dump the phone if the lack of Flash is such a bother, it's a overpriced, over rated phone that has little purpose that a regular phone with text messaging, a laptop, a GPS, a camera and a iPod can do so much better and cheaper as they are separate devices with more abilities.
Check out this poll.

Goods Receipt Screen: Not to show PO's with no more items to be confirmed

Dear SRM Gurus,
The Goods Receipt screen is supposed to list your PO's that are opened for receipt. When I have a po for 10 items but I only received 8 and that's the final delivery, I check the "Final Delivery" flag as I create the confirmation in SRM. For me the receipt is complete and no more delivery/receipt is expected.
The next time I go to confirm goods, the po is still listed in the list of opened po eventhough I'm not able to receive any more goods against it. Is there a way to 'remove' or hide this type of PO from the goods receipt screen?
Regards,
SN

hi,
if its a material PO, the PO should have been removed from the search list. however the service PO continue to exist and you would be able to do any more confirmation.
To remove it from the list implement BADI BBP_WF_LIST
cheers
Iftekhar Alam

Wanted to block the Goods Receipt but not the Invoice Receipt

Hi
After the partial delivery of the Goods Receipt, i am manually setting the "Delivery completed" indicator in the PO. I dont want any future delivery against this PO. But it is allowing me to do a GR even though the Delivery Completed Indicator is set.
How can i stop all the future deliveries agains the PO. But at the same time, is should not block the IR. I tried this by locking the PO item. It is not allowing me to do any GR after locking the same. But at the same it is not allowing me to do the IR also.
Is there any way i can stop the GR, but do the IR for the purchase order ? Please clarify. Points assured.
Thanks
Venkat.

Hello,
If u maintain the latest GR date as a current date in the PO item level - delivery tab, then system will not allow to do further GR in future.
Latest Possible Goods Receipt
This is the latest acceptable date for goods receipt (GR).
If goods are received after this date, you will receive either a warning message or an error message, depending on the system setting.
If you receive an error message, you will not be able to post the GR.

GOODS RECEIPT IS NOT COMPLETE FOR ITEM

Similar Messages

Maybe you are looking for