Goods return to adjust open qty on Sales/Purchase Order as option

It would be handy to have an option (setting) that allows a return to adjust the open quantity on a sales order (and re-open the sales order if it was closed) if the delivery was based on a sales order. And the same functionality on the purchasing side as well.
This will allow for using the open items list to see what is still due in/out.

Hi Vivek,
I tried as per your given direction but it won't worked
What I required is for E.g.
Process Order No 11111
Material No           Mat-A   
Batch No              Bat-A
Storage Loc          PM01
Requirement Qty which is coming from BOM                        120 KG
Withdrawl Qty either using COR6 or MB1A (261 mov type)     120 KG
Consider that Process Order is already confirmed and due to some reason All the materials issued against Process Order has to be returned to Store for another Process Order
When I used MB1A and entered movement type 262 with storage location PM01 then click on To Order Button to enter Reference : Order and click on Tick Button
It then displayed only those materials which is not yet issued and required to be issued and automatically Movement Type changed to 261
Please guide
Kunal

Similar Messages

  • Table to get MRP open tqy for a purchase order

    Hi,
    Can anyone suggest a table to get the MRP open qty when the purchase order is given instead of the tables j_abdsi, J_3ABSSI, or j_3adbba??
    Thanks
    Keshi

    thanq
    working out.
    as its-vgbel not primary key, Do we have any FM to pull the LIPS entry, by passing VGBEL value?
    thanq

  • Assigning Manual Cost/Profit Center in Sales/Purchase Order

    I don't really know how to describe my problem, so I will instead describe my situation of what I need to do.
    We have all our G/L accounts associated with Cost elements with no Cost/Profit centers set as default.  The cost elements represent our services (ex: internet sale, hardware sale, software sale) and our cost/profit centers represent our employees.  My question is how/where do I assign a cost/profit center manually when creating the sales/purchase order?  Basically I would preferably like to assign the cost/profit center based on the corresponding sales person to the sales order.  For the purchase order we are acting as a middle man between vendor and customer, so how would we assign a manual cost/profit center that pertains to us?
    If you have a good solution to this, please provide detailed steps or instructions with t-codes and walkthroughs as I have very little knowledge about how the cost/profit centers work.  I do understand sales/purchase orders though.

    Hi Lee
    There is a transaction code OKB9 for automatic assignment of Cost Element, Cost Center, Profit Center for a Company Code. There you have to assign the Cost Center and Profit Center combination to a particular cost element.
    I hope this will work out for your problem
    Please let me know it is working or not
    Regards
    Surya

  • Consumption of PIR  for Internal sale Purchase order

    Hi
    Our client has 2000  Production plant which he enter reqmts  on monthly basis per year.
    Internal sale Purchase  orders are created for the FG materials to one common vendor 5000 to plant 2000.
    we are in ECC6.0. Produced qty are delivering using mvmt type:653.
    we have used strategy 10 .Presently  during MRP run for these Internal sale purchase order remts is not considering PIR..
    My requirment is i want to consume Internal sale purchase orders  by PIRs.
    what settings i have to do?
    Thanks & Regards,
    srihar.M

    Hi
    Purchase order is created using purchase order type internal sales purchase.
    vendor 5000  supplying plant  1000 Plant., Purchase orag 1000..
    Shipping point is 2000(This is production plant).
    so in MD04 for the FG material in 2000 plant against Purchasing document delivery/receiving plant :1000 appearing.
    OBD is creating against Purchasing document by mentioning shipping point as 2000.
    PGI is happenign from 2000 plant.. using movement type:643 (Transfer to cross company).
    GR is happening in 1000 mvmt type:101.
    Now my issue is the Plan Ind requirments in 2000plant should consume these Purchase order qty..
    As these reqmt(Target plant) is includive of these PO qty expected.
    Please suggest me..
    Waiting for yur responce..eagerly.
    Thanks
    srihari.M

  • Tables for sales & purchase order data relating to delivery

    hi all,
    i am writing a report to download all the delivery data after the delivery is created.i have to download the sales order data & purchase order data relating to this delivery also.
    i am using likp & lips table for delivery.which tables i
    should use to get the sales order data & PO data for the same delivery (likp-vbeln). i.e i need the sales & purchase order related tables which has link with delivery tables like likp & lips etc.
    plz advice me. it is very urgent.
    any idea is highly appreaciated.
    Regards
    pabitra

    in Addition to NM ,
    in case of STO there is no Sales Order , Process will be like this
    PO-->Delivery->PGI--->Billing  then u have to
    link
    *getting the History data of the PO
            select ebeln
                   ebelp
                   belnr
                   menge
                   from ekbe
                   into corresponding fields of table  w_ekbe
                   where ebeln eq w_lips-vgbel
                     and ebelp eq w_lips-vgpos
                     and bewtp eq 'L'.
    Regards
    Prabhu

  • Goods Issue Qty More than Purchase Order Qty ( Intercompany Stock trans. PO

    Hi All,
    I have following Issue,
    I can do Goods Issue more than qty which is in Intercompany stock transport
    purchase Order.
    I want to restrict this Process, It should not allow more than PO Qty.
    In the STPO Setting, Checking rule field is blank.Is this the reason for
    the Issue.
    Thanx in Advance.
    Key.

    Hi -
    This is controlled by setting at item level in purchase order / sto creation transaction i.e, ME21N.
    Go to item --> Delivery tab.
    You will see under delivery tolerance and over delivery tolerance.
    Please reward points if youfind this information useful.
    Thanks,
    Ramesh

  • Goods receipt through Inbound delivery for Sub-Contracting Purchase order

    Hi
    I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
    Thanks in advance for your immediate response.
    with regards,
    Joseph Anand B

    Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
    In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
    You can fix this by maintaining correct batch in the PO component list.
    But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the  recevied stock shouldn't have been processed to do reversal of inbound delivery.

  • Error during Post Goods Issue of Material in VL02N for STO Purchase Order

    I am getting one error message during Post goods issue of Material for STO Purchase order.
    I am doing the Post goods issue in T code VL02N
    Error is " Account type D is not defined for Document type WL"
    What is the settings required to be done.
    Thanks,
    Shailendra

    Please check Plant customer master reconsilation account properly maintained or not in XD03 transaction.

  • Goods Recipient and Unloading Point on an Blanket purchase orders

    Hi,
    I am trying to maintain value in the fields Goods recipient  and Unloaing point in an account assigned purchase order or purchase requisitin. However when I select item category B (Limit) these fields are greyed out.
    I know that these fields are driven from the account assignment category fields slection. I checked in configuration. In configuration it was found that these two fields are configured as optional. Still I am unable to identiy which config derives this fields selection.
    If any one of you faced this weird situatioin or do I missing any thihg here..?Please let me know
    Thanks
    Uamakanth

    Hi Uamakanth,
    Did you get to a resolution on this one? I am having the same problem.
    Let me know...
    JC

  • Sales Order/ Purchase Order Approved option

    Dear Friends,
    In System Init-> Document Settings-> Per document tab page-> sales order and purchase order documents have PO Approved/ SO Approved options. When we keep these options unchecked then any SO or PO even if saved cannot be copied to delivery/grpo unless we select the same checkbox in SO/PO logistics tab.
    My question is if I keep the options unchecked in document settings and then any SO/PO is created it will be unapproved. Please let me know if during authorization i can disable this option for the user and enable the option for the manager i.e the checkbox at logistics is disabled for the user and enabled for the approving manager. If yes please give me exact path in authorization window.
    Edited by: Philip Eller on May 13, 2008 9:05 AM

    Hi,
    If you want to control the user from creating PO/ SO, then you can create Approval procedures to them. You can create Approval procedures giving any conditions.
    As per my understanding, for your case, you need to control each and every document (ie., PO / SO documents creation). For that you can set Approval for these documents whenever they create.
    For that Administration --> ApprovalProcedures --> Approval Templates
    1. Enter the Approval Procedure Name and its Description.
    2. Originator Tab : In this choose the user's name from which  these documents will be created.
    3. Documents tab: In this select the Document type to which you are setting the Approval procedure (ie., PO or SO)
    4. Stages tab : Select the Approver name (Senior user name who approves the Document)
    5. Terms Tab : If you want to set approval for every document then select "Always" option. If you generated query to set approve then select "When following Applies" option and link the query you have generated.
    Now your Approval procedure will be set.
    Raja.S

  • Same message code & function for both Sales & Purchase order idoc.

    The same message code and function be used to send both sales order and purchase order idoc?

    Hello,
    You can use the same message code and function to send for both sales orders and purchase orders provided if you use different message types i.e., output types in the outbound partner profile configuration for processing these transactional data.

  • Customizing for Back to Back Sales & Purchase Order

    Dear Gurus,
    Can anybody give me detailed customizing steps so that I can create a back to back sales and purchase order ? How does this process work ?
    Would really appreciate if you dont just paste the SAP help URL over here.
    Thanks

    Dear,
    Please check: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/business_maps/guid/eg1slxvyat1odhrwoi8vc29sdxrpb25jb21wb3nlci5zyxauy29tl3nvy292awv3l21jcgdl%0d%0adc5hc3a/cgfja2fnzwlkpsz2awv3pxnty3jlbmrlcjimawq9muu2rtqwmjk5mue2nduwmzk0m0fg%0d%0aqtnfnjg1rjbgmkymjnhzbc1iyxnlpwh0dha6ly9zb2x1dglvbmnvbxbvc2vylnnhcc5jb20vc29j%0d%0ab3zpzxcvbwnwz2v0x21pbwuuyxnwp3vybd1zzg5fbmv3lyymd2vilxvybd1odhrwczovl3nvbhv0%0d%0aaw9uy29tcg9zzxiuc2fwlmnvbs9zb2nvdmlldy9ty3bnzxrfbwltzs5hc3a/dxjspsymehnslwxp%0d%0ac3q9c2rux2dlbmvyywxfcmvuzgvylnhzbhq7c2rux2xpbmtyzxdyaxrpbmcuehnsddtnzw5lcmf0%0d%0azuhutuxfu0rolnhzbhqmjnbhy2thz2utawq9jizyzxnvdxjjzxr5cgu9c2rux3nvbhv0aw9ux2nv%0d%0abxbvc2vyx2z1bgxwywdljizwyxjlbnrssuq9l3dlymnvbnrlbnqvd2vicgfnzxmvynb4lzqwielu%0d%0azhvzdhjpzxmvuhvibgljifnly3rvci9cdxnpbmvzcybqcm9jzxnzifbsyxrmb3jtigluifb1ymxp%0d%0ayybtzwn0b3imjnrpdgxlpckgr2xvymfsifryywrlie1hbmfnzw1lbnq6iejhy2stdg8tqmfjaybu%0d%0acmfkaw5nifbyb2nlc3mmjnzpcnr1yww9dhj1zq==;jsessionid=(J2EE3417300)ID0462866350DB00827079450451046937End?prtmode=default
    http://help.sap.com/bp_cp1600/CP_Global/Solution_Map/1E6E402991A64503943AFA3E685F0F2F.htm
    http://help.sap.com/saphelp_gts71/helpdata/en/0b/333a426ea5b26be10000000a155106/frameset.htm
    Regards,
    Syed Hussain.

  • Rejected Qty reference in Purchase order

    Dear Gurus
    I have created PO of 100 qty ,i have taken GRN of 100 qty ,in Quality rejection i have rejected 10 qty and accepeted 90 qty
    ========>>>
    Now if you will do the normal rejection i.e Return Delivery
    You will get the reference of this in the PO Created earlier i.e 100 qty PO created ,100 qty GRN done and ret delivery 10
    ==========>>>>
    But here i am doing the return delivery through SD i.e I am sending this 10 qty which is rejected by creating return Order (Return PO)
    i.e i have created PO of 10 qty and marked the return DElivery tick so that th shipping tab in item detail gets activated. and in delivery tab i have to select the block qty.
    I have saved the no and the PO no gets genereated.
    I have to give this PO reference no to SD person and through VL04 he will create delivery and do the POST GOODS ISSUE.
    Till now i think everybody must have understood the scenario.
    ==================
    Now the problem is my cleint wants that he should have the rejected good's reference in the Earlier PO which i have created for 100 goods.So that the Vendor will come to know that he has received the rejected goods against this PO............CAN ANYBODY HELP ME IN THIS ISSUE
    THANKZ IN ADVANCE
    Good reward points will be awarded for all the goods answer
    SHAILESH

    do one thing
    change the same PO
    add the same line item below 100 qty
    which ur rejected qty and tick it as return delivery
    u have the reference in the same PO
    regards,
    snb

  • Post Goods Receipt(PGI) with custom condition types on purchase order(PO)

    Hi all,
    I am trying to post goods receipt with custom conditions on the PO. One of the custom conditions is freight (delivery cost). The value on this condition will post to a different G/L account (freight provision account, rather than GR/IR).
    My problem is, when posting this GR, the cost center assigned in the PO under 'account assignment' is not used for posting the custom condition, which I really need it to happen.
    Simply put, I want all postings from this PO inherit values in 'account assignment'.
    I have been looking into configurations in automatic posting and condition types, but I still have no clue where I can make it happen. Do I have to use BADI?
    Thanks.

    Delivey cost condition will be posted to accrual accounts not to the cost center.

  • Negative discount being generated - Sales/Purchase Order quantity

    Hi All,
    I have an add-on which creates a Child Order (AP and AR) from a Parent Order.  The Parent Order needs to be updated if a Child order created from it has a change of Quantity.
    What I am finding is that twhen I update the Parent with the revised Quantity I am getting (seemingly at random) a negative discount created on the Parent Order line which has been updated.  the only change to the Order line is the Quantity and a UDF.
    Has anyone got any idea why this might be happening?
    Thanks in advance.
    David
                                oOrder.Lines.SetCurrentLine(arrLineNum(intCurrentLine))
                                If oOrder.Lines.LineStatus = SAPbobsCOM.BoStatus.bost_Open Then  '// Check LineStatus of Parent Order
    '// Several lines of validation removed for clarity
                                       oOrder.Lines.Quantity = dblRevisedOrderQty
                                        oOrder.Lines.UserFields.Fields.Item("U_ALP_CalloffOpenQty").Value = dblRevisedOrderQty
                                    End If
                                    Dim lngSuccess As Long = 0L
                                    lngSuccess = oOrder.Update() 

    Hello
    If your B1 was upgraded from 2004 /2005 version, please check the Document Settings in Administration module about the "Calculate the Row Total using the Unit Price" option: Which Method you are using for Calculation of LineTotal?
    If your B1 version is not upgraded, or You using UnitPrice for Row total calculation (this is the default for sap b1 2007) , you has to save the UnitPrice before you touch the qty.
    So I am using the following workaround:
    1. Save Price/Unit price
    2. Save Discount
    3. Modify Qty
    4. Enter UnitPrice/Price
    5. Enter discount
    See SAP Note: 1334050 and 1289493
    The Row Total Calculcation and rounding method is changing your Discount to positive/negative values.
    Regards,
    J.

Maybe you are looking for