Goods Reversal Urgent...............VL09

Dear All,
I have tried to do the reversal of stock that I wanted to transfer from one plant to another (via Stock Transfer Order Process). The purpose of doing this is I want to make separate delivery documents instead of single delivery. Now I am not able to do the reversal because system is showing the error that is u201CAccount 58012000 requires an assignment to a CO objectu201D.
Now the material is in transit.
Please guide me to solve the Error.
Regards,
Sachin

Hi Sachin,
You have a cost account defined in accounts determination (OBYC). But every cost account must have a cost object associated (internal order, cost center, and so on).
You must decide what is the cost object to 'receive' the cost value on the account.
Go to OKB9, insert the account (can be plant dependant) and the cost object, then repeat GR.
Then check out the financial documents for you to have an ideia.
Thanks,
Raja

Similar Messages

STO Post goods issue reversal using vl09 not happening.

hi
user has done following cycle
1.ME21N-PO document type UB and Item cat I.
2.VL10B- Outbound delivery
3.VL06G-goods issue using automatic MVT 647 and 101)
4.VF01-Performa Invoice(billing Type JEX)
5.J1IIN- Excise invoice.
In billing base price is missing because of that all duties and net price zero.now user wants to cancel entire cycle. he has done excise cancellation using J1IH. we are not able to reverse billing using VF11, we are not able to PGI reversal using Vl09. it giving error "No dat available for your selection".
Note: is it problem of JEX because we have not assigned cancell billing type and doc pric procedure to JEX?
any solution for the above issue.

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

Post Goods Receipt Reversal with VL09 for customer returns in WM

Hi,
We have performed Goods receipt and stock was putaway with a TO confirmation in WM. Now we want to reverse the goods receipt and the quantity is not in 904 area for returns. How can I get the stock back to 904 from regular storage type with same dynamic bin number as my customer return delivery number? Basically When I do VL09 system complains that it canot find the dynamic bin number which is same as my delivery number. Answer will be rewarded.
thanks,
Sarvesh

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

Sales Return: credit memo Should generate automatically with goods reversal

DEAR SD GURUS N EXPERTS,
Currently we are using following system of Sales return.
VA01: (Order Type: RE) --> VL01N (Return Delivery) --> VL09 (Goods Reversal) --> VA01 (Request 4 Credit Memo or remove billing bloc) --> VF01 (Credit Memo)
But, now my client want a such configuration that entry of Credit memo should happen along with Goods Reversal (VL09) - Automatically. They don't want to carry out VF01 separately.
Reason behind it: Customers has credit Limit, Suppose a customer has a Credit limit of 5,00,000 and we have delivered the Material of same amount. It means all the credit limit has been used. But now He has returned the material of 2,00,000. But it will not affect the credit limit until we pass Credit memo.
Please suggest the required configuration and what we can do in such scenario. Thanks in Advance.
DSC

Again I can tell you that the process what you were following (reversing the goods receipt) is totally wrong and it will have a serious negative impact on inventory. Either you should not create a return delivery or take the stocks into parent plant. If you dont want to show in inventory, then scrap it which is a standard process.
Coming to the requirement, there is no standard way to achieve this. Check these threads where the same topic was discussed
[Re: How to set up in SAP to have automatic billing after PGI |Re: How to set up in SAP to have automatic billing after PGI]
[automatic billing|automatic billing]
You have to apply the same logic for credit note also.
thanks
G. Lakshmipathi

Wrong goods reversal date

Hi all,
I am facing a case where the the GI was done on 27/03/2010 but the user for changing the quantity in the document
reversed the goods issue by VL09 on 03/04/2010.The problem here is now we want the reversal to happen at 27/03/2010 and then carry out the GI with required qty.
How to reverse the G R document?
MBST t code doesn't support this as it done from VL09 T code not through Inventory Management transaction.
Please suggest some solution.
Lakshman

Hi Sidi
Please find the error details :
GI FOR DELIVERY CANNOT BE CANCELLED FOR THE FOLLOWING REASONS
CANCELLATION DATE 27.03.2010 IS BEFORE THE GI DATE 07.04.2010.
i checked the omsy settings its is ABp is ticked and DBp is unchecked.
thanks for help.

Cancel Goods Issue using VL09

Hi,
My Client have created a Delivery Order along with the Transfer order, the Goods Issue has been posted. When he tried to reverse the Goods Issue using VL09, it promoted the error: GI for Delivery XXX cannot be canceled for the following reason, Document (Material Movement Document: GI) does not contain any selectable items. Can anybody please help me?
Thanks.

Hi,
Make sure your User has created the Delivery only or Invoice also for that particular order if there is invoice also exist to that particular order he has to check first the Document Flow Status and he has to cancel the invoice by using tocode vf11, he has to cancel the shipment cost if there is vi02, he has to cancel the shipment vt02n then he can do goods reversal vl09 and Delivery.
This may help you Inshallah
Regards,
Mh

Credit memo link with Goods reversal

Hi,
Does anyone know of any process or method either in R/3 or in SRM that can be used to link Goods reversal with automatic credit memo creation for a PO ( when invoice is already posted ). We have SRM 4.0 and not using GRBasedIV status checked for most of the POs.
Can a customized movement type or workflow achieve this.
Thanks in advance,
Viv

Again I can tell you that the process what you were following (reversing the goods receipt) is totally wrong and it will have a serious negative impact on inventory. Either you should not create a return delivery or take the stocks into parent plant. If you dont want to show in inventory, then scrap it which is a standard process.
Coming to the requirement, there is no standard way to achieve this. Check these threads where the same topic was discussed
[Re: How to set up in SAP to have automatic billing after PGI |Re: How to set up in SAP to have automatic billing after PGI]
[automatic billing|automatic billing]
You have to apply the same logic for credit note also.
thanks
G. Lakshmipathi

Regarding Goods Reversal and Goods Issue process for Production orders

Hi,
I have a issue regarding Goods Reversal and Goods Issue process for Production orders.
Actually I am having a Z - Function Module in that i am passing production order number other details to
make the Goods Reversal happen.
The code for the above is as below:
 i_mvtit-material = wa_mdfa-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = 'ZWIP'.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg. "New
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = '262'.
 i_mvtit-xstob = 'X'.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = '03'.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
The Above code does the Goods Reversal but then i will update one Z Table with fields like
Production Order Number[AUFNR], Number of Reservation[RSNUM], Item Number of Reservation [RSPOS], Material Number [MATNR], Requirement Quantity [BDMNG], WBS element[PSPNR] etc. If Above BAPI runs sucessfully.
That is happening correctly.
But Then actual issue is i have do Goods Issue for those Z-Table records.
There i will give Production order Number's & Storage Location in Selection-Criteria.
Then i need to do Goods Issue for that order.
The code i had written as follows.
* POPULATE VALUES FOR BAPI CALL
 i_mvtit-material = i_zpsi7603_01-matnr.
 i_mvtit-plant = i_resb-werks.
 i_mvtit-spec_stock = 'Q'. "New
 i_mvtit-stge_loc = p_sloc.
 i_mvtit-stge_type = i_resb-lgtyp. "New
 i_mvtit-batch = i_resb-charg.
 i_mvtit-orderid = i_resb-aufnr.
 i_mvtit-spec_stock = i_resb-sobkz.
 i_mvtit-entry_qnt = i_resb-enmng.
 i_mvtit-entry_uom = i_resb-erfme.
 i_mvtit-entry_uom_iso = i_resb-meins. "New
 i_mvtit-wbs_elem = v_frwbs.
 i_mvtit-move_type = c_261.
 i_mvtit-mvt_ind = 'F'. "New
 i_mvtit-xstob = c_x.
 i_mvtit-gr_rcpt = i_resb-aufnr. "New
 i_mvtit-reserv_no = i_resb-rsnum.
 i_mvtit-res_item = i_resb-rspos.
 APPEND i_mvtit.
* HEADER ELEMENTS
 k_gmvt_code-gm_code = c_03.
 k_gmvt_head-pstng_date = sy-datum.
 k_gmvt_head-doc_date = sy-datum.
* CREATE GOODS MOVEMENTS
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = k_gmvt_head
 goodsmvt_code = k_gmvt_code
 TABLES
 goodsmvt_item = i_mvtit
 return = i_return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 wait = c_x.
 READ TABLE i_return INDEX 1.
 IF i_return-type EQ c_s.
 DELETE FROM zpsi7603_01 WHERE aufnr = i_resb-aufnr AND
 rsnum = i_resb-rsnum AND
 rspos = i_resb-rspos.
 ENDIF.
If i run above code for Goods Issue it is giving error can anybody tell me what changes i need to do to make it work.
The Error Message i am getting is as below:
Qty and / or "delivery completed" ind. or final issue ind. are missing
Error Number for the above is : 264.
Can anybody solve my issue.
Any help will be appreciated.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi,
Thanks boss.
It is working now correctly.
The issue is the i_mvtit-XSTOB should be equal space in case of Goods issue while incase of Reversal it should be equal to X.
Thanks for ur efforts.
I had awarded you points.
Thanks a lot.
Thanks & Regards,
Rayeez.

Regarding Goods Reversal & Goods Issue Process for PO

Hi Experts,
           Could you any one tel me what is Goods Reversal and Goods Issue process for PO...
How to create the FM & detailed Procedure Pls?....
Please any one tel me.......
Thanks & Reagards
HB

Hi Hans,
SOURCE : HELP.SAP
Purpose
Inventory Management uses this process in such a way that the goods issue posting is divided into two parts that run in separate systems. Posting the GI document in the supplying plant results in a message to the receiving plant. The receiving plant then performs a complementary posting. The physical goods receipt takes place as usual.
Prerequisites
When using batch processing, the following prerequisites must be fulfilled:
Both the original and target systems have the same batch definition level.
The batch definition level is either the material or the client.
An ALE scenario exists for materials and classes (characteristics).
Unique batch numbers exist cross-system.
Batches can only be changed in their original system when they are not decoupled. From an organizational point of view, this must also lead to the batch status being changeable in a local SAP R/3 system. For example, this is impossible when transfer posting to a new batch and results in further actions, for example, relabeling containers, palettes and so on.
Characteristics
As for the purchase order in a one-system situation, the system should automatically post the material into the stock in transit at the receiving profit center and the corresponding Profit Center Accounting using intra-CC transfer prices at goods issue for the purchase order and the unchecked delivery. This requirement is valid for one-system situations as well as for two-system situations where there is an ALE interface. No internal billing document should be created.
In a two-system case, the receiving profit center should be derived at goods issue from the unchecked delivery. Profit Center Accounting then takes place with
Stock change transfer price to stock
Internal expense to internal sales
Internal clearing account to stock change transfer price.
Account determination in a purchase order for an intra-company-code transaction must be different from account determination in external transactions. Automatic GR/IR account clearing is required in both one-system and two-system situations.
The stock in transit must be visible in the receiving profit center.
The system must send a shipping notification at goods issue in one-system and two-system situations.
You need to create an invoice document for the internal and external trading statistics for cross-boundary deliveries as well as for customs purposes.
GR/GI slips are created.
Process Flow
Goods Issue Posting for Stock Transfers
The delivery triggers the goods issue in the issuing system.
The call contains the stock transport order data known in the delivery, including the PO item and the logical system of the recipient.
The transaction (quantity and value updates) is selected using the movement type:
Movement Type
Function
641
Goods issue with UB logic (Creation of stock in transit at recipient, immediate value posting).
647
As 641, however the goods receipt line (movement type 101) is added automatically, so that the goods receipt is posted at the same time as the goods issue (one-step procedure).
You determine the movement type according to the schedule line category in Sales and Distribution. The goods issue for a cross-system stock transfer must be different from the integrated transaction. This is achieved by adding a new movement type.
You post quantities and values at goods issue in the same way as a goods issue for a sales order. That is to say, the quantity is posted in the supplying plant and the value is adjusted to that of the stock account. The offsetting posting is made to a clearing account. The known data from the delivery is copied to Accounting to balance the account where necessary.
The system creates a message to the appropriate receiving system for all items with reference to a cross-system purchase order. The system does not perform any validity checks on the recipients data before posting begins. Incorrect Customizing results in the update being terminated.
If a goods issue has receiving plants in different logical systems, an IDoc is sent for each system.
In order that the goods receipt is able to use the values on the receiver side, you must add the values used to post the goods movement, in particular the transfer prices, to the IDoc.
The logic for recognizing the profit center switch functions as follows: At goods issue, the system recognizes that the profit center of the issuing plant is different from the profit center of the receiving plant. The system derives the profit center node from the relevant profit center.
Data Transfer
The IDocs sent by the issuing plant trigger the goods issue postings in the receiving plant.
Background Posting in the Receiving System
The goods receipt is posted in the receiving system using the IDoc. The interface receives the data from the goods issue in the supplying plant. The following processes now run at the recipient:
The system finds the update control for the GR part of the posting.
The goods movement is posted with the new movement type.
During valuation of the goods receipt, the system might, where necessary (UB logic), refer to the values (legal value and the value from the parallel valuation type, if you are using the transfer price function) from the IDoc.
The PO history is updated. The PO history is updated with the material document number from the second part of the GI posting. The GI document number is not stored in the supplying plant, because there is no way to display this document.
In two-step procedures the goods receipt is posted to the stock in transit.
Reversal
You can only reverse this goods issue for the PO using the cancellation transaction in SD. You cannot reverse the GI in Inventory Management.
The material document that is automatically created in the receiving system cannot be canceled. This reversal is triggered by the sending system (the actual reversal of the GI document takes place there) and transmits the data, including the reversal movement type, to the receiving system. No actual reversal is posted in the receiving system, because the material document number of the original document does not exist in this system. This scenario is applicable for cases where you use the two-step procedure (with stock in transit).
Distribution of Batch Master Data and Characteristics
The batch information is transported using the message category BATMAS.
When you create a cross-system goods issue, the system creates the corresponding IDoc using the message category BATMAS.
When the delivery arrives in the target system, the batch and all the information is already present in the system.
Changes to the batch data are also distributed using the message category BATMAS.
The batch can be decoupled in the receiving SAP R/3 system. This means that the batch can have a different status in the receiving system than in the original system. By setting an indicator at material level, you decide whether the batch can be decoupled or whether the batch and all its attributes are copied from the original system. "Decoupled" i.e. "locally independent" batches are no longer distributed from its own system.
The batch data does not need to be available before the physical goods receipt takes place. The goods receipt into the stock in transit does not usually refer to the batch unless you are working with batches with assigned active ingredient values.
If the GI cannot be posted for organizational reasons, for example because the goods cannot be loaded onto a truck until 10pm, then you can post the goods into the GR blocked stock. This stock is also non-batch-specific.
In cases where the GI IDoc arrives before the batch IDoc, then the GI IDoc can be subsequently posted by a periodically scheduled report (transaction BD87). A program like this exists in the SAP standard system. In Customizing for MM Inventory Management (activity Copy, Change Movement Types), you should make settings to define that manual creation of batches at goods receipt is not allowed.
Shipping Notification
The shipping notification is required in the receiving system due to its relevance for MRP. In this way, for example, a change in delivery date determined at goods issue is sent to the receiving system using the shipping notification. The shipping notification can also be used when posting the GR batches.
Reward if found helpfull,
Cheers,
Chaitanya.

Restriction of goods reversal with 262 mvt type in MIGO

Hi,
During goods reversal using mvt type 262 with reference to a production order, we are able reverse any amt of qty, I want to restrict the reversal to the extent of other than confirmed qty.
Eg. Order qty 10 EA, GI done 10 EA (BOM 1:1), confirmed qty 5 EA. I should be able to reverse only 5 EA or less and not more, as 5 EA already consumed.
Regards,
Jagadeesh.

Jagadeesh,
This check can only be possible using user exit "EXIT_SAPMM07M_001" of Enhancement MBCF0002, you can write your logic in Include ZXMBCU02.
Regards,
Prasobh

Unable to do Goods reversal

Hi,
I am unable to do goods reversal of an outbound delivery. Error message shows "Enter Movement type".
Typ Message text                                                           LTxt
    GI for delivery 1085154084 cannot be canceled for the following reaso
    Enter Movement Type
Please provide your valuable inputs to solve the above issue.
Thanks
Rama

Hi,
Rama as our other friends has suggested u pls check the schedule line assignment for the return sales document type RE.
And also the movement type there are two type 651/653 choose the required and carryout the returns delivery in vl01n if it is manaually.
Pls check if it works.
Regards,
Ramesh.

CIN : Capital goods reversal

Hi
Can someone give the steps for capital goods reversal process in CIN, with the transaction codes.
Regards,
R.Srinivas

see first u have to do cancellation of ur G R N doc in MIGO after that go to J1IEX here select POST & give vendor excise no. then press enter --> now in front of u a screen appears in which all details are displayed , now click on SIMULATE button on top , a small box appears in cenvat reversal is written for part1 & part 2 click on continue & then click on POST CENVAT Button.then u can check in T CODE = FB03 Ucan see that all ur J1IEX Entries i.e CIN entries are reversed , tell to Check in FI FOR T CODE FB03 .
reward for efforts.
sap11
Edited by: sap11 on Jan 24, 2008 10:49 AM

Error while reversing goods issue using VL09

Hi All ,
user is getting the error " 4902546971document does not contain any selectable items " when reverse the GI using VL09.
Please find the below document flow.
Free of Charge 70475917 / 10
. Purchase order 9900099037 / 10
. Delivery Standard 80721176 / 10
.. Shipment 199662 / 1
.. WMS transfer order 12862453 / 1
.. Pro Forma Invoice 90070497 / 10
.. GD goods issue:delvy 4902546971 / 1
Regards,
Amar

Hi,
Try to reverse the gods issue, with VL09, for document "Delivery Standard" with number 80721176
Free of Charge 70475917 / 10
. Purchase order 9900099037 / 10
. Delivery Standard 80721176 / 10
.. Shipment 199662 / 1
.. WMS transfer order 12862453 / 1
.. Pro Forma Invoice 90070497 / 10
.. GD goods issue:delvy 4902546971 / 1
Regards,
Amar

Unable to reverse goods ..using vl09

Hi Experts,
we have created order , bill and delivery in production and we made one small mistake and cancelled the bill when we try to cancel the delivery using vl09 - goods movement reverse i am getting the message no data available when i check the billing status it says C-completed and also movement status aslo C. how can i reverse the goods its there any other way ....
Thank you for your help in advacne....
Regards,
Venki

Hi
one small mistake and cancelled the bill
If you are sure that your first bill is cancelled there will be another bill having the cancelleation number
Are you seeing that in document flow
If that has happened the original invoice will have a posting status as E and not C as per your thread
when i check the billing status it says C-completed
I feel that your cancellation process has not been done properly
Once this is cancelled properly the delivery status will be set to BEING PROCESSED from COMPLETED
Then you can reverse it in VL09
Make sure that you have executed cancellation properly
Regards
Raja

Error when trying to reverse a goods receipt using vl09

Hi All,
I'm trying to reverse an inbound delivery using vl09. Getting a message that
"Error at central message handling" . After this the system is throwing me out of the tcode vl09.
Any idea why this is appearing and how to overcome this.
Regards,
Ashwin

Hello
Please refer the previous thred
"Inbound delivery reversal issue
and also the SAP notes mentioned in earlier reply.
warm reards
Ramakrihsna

Goods Reversal Urgent...............VL09

Similar Messages

Maybe you are looking for