Goods send for quality testing

hi,
sap gurus,
good morning to all,
what type of business process can v identify as the goods will send for LAB TESTING/QUALITY
TESTING and they are excised.
can anybody send the steps for the following.
regards,
balaji.t
09990019711

Hi Balaji
there are two kinds stock 1) internal manifacture 2) extranal stock comming from vendor.
1) if it si internal finished goods it willlbe send it for quality testing after every thing is fine then it will go to un-restricted stock with momennt type 561
2) if it external stock it is comming from vendor.with ref to po MM people they do MIRO and MIGO (invoice verification) then it will go to unresticted stock. otherwise it will send it back to vendor.

Similar Messages

Output for Quality test certificate

Hi mates
Can anybody help me out in Configuring Output type for Quality test certificate while creating Outbound delivery.
Thanx
regards..,
Karthik

Hi..
Go to QA11 or QA31..
system will ask for Inspection lot.. do the user status(UD completion) wid ststus "A"
and save..
go back and check tab Message type..
hope this will help u...
correct me if i m wrong...
thanks..
mk

Good source for quality album art

A good source for getting good quality album art, which has a higher resolution than Amazon, try http://www.coveralia.com/ which eventhough it is in Spanish, simply type the artist in "BUSCADOR:" at the top, and it is obvious from there. I've been using it for five minutes, and looks impressive. My iPod has not arrived yet, so cannot test that part, but I assume it will work as it goes into iTunes ok....

This is the same as copy & pasting from Amazon, which has lower quality. As long as you own the CD, I think you are OK. Anybody else able to comment.

Needs maintain Quality testing condition type in order

Hi,
There is a scenario for maintaining the quality testing charges after PGI. in cash sales customer. after they are updating in the invoice. so there is difference in order value and invoice value,
This difference needs to avoid.
This condition type (like ZQTC) needs to indicate the user at the time of sales order processing.
Please help me for configure the same,
Note: this condition type should be maintained only for Quality testing charges applicable for cash sale customer.
Thanks and Best regards,
Muralidharan S
9841381700.

resolved by self

Client creation on XI on development server for Quality

Dear All ,
I have configured scenarios on one of the client in development server . <b>I want to create new client for quality/Testing on the same development server</b> .Can somebody guide us how to create new client on the same server .
Thanks in advance
Regards
Prabhat

My question was meant to determine whether you had any CPU licenses. In retrospect, it doesn't matter.
You cannot use your Production licenses on your Dev system without violating your contractual obligations with SAP. i.e. both system cannot run in parallel using the same license keys.
You might be able to use the quarterly Test licenses that SAP makes available without violating your contract. I am uncertain of the terms of the test licenses.
You should probably talk to your Account Manager on this.

How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?

If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5.

Goods receipt for sales order (sample for inspection)

Hi Experts
Is it possible to enter goods receipt for a sales order?
This process is required for collecting sample from customer for carryingout testing of the sample.
Please suggest the doc types and process steps.
warm regards
ram

Hi Lakshmipathi
Thanks for your reply.
This is a sample received from a client for carrying out analysis and furnishing the laboratory test results as a Quality certificate
So, the sales order is for execution of service (Testing service).
The sample to be received in ref with the sales order and test result to be delivered to customer.
Please suggest the best possible process
warm regards
ram

Job Opening for Labview Test engineer and Senior Labview Test engineer in Honeywell Automation India Limited,Pune

Job Openings at Honeywell Automation India Ltd., Pune
Honeywell Automation India Ltd, Pune is currently looking Senior and Junior Labview Test Engineers.
Position -Permanent
Job Location: Pune,India.
Job description is as follows:
For Senior Labview Test engineer Position: (4-6 years)
Primary Skills:
• Should be an expert in NI Labview.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW RealTime/FPGA toolkit etc
• Experience on hardware test automation using NI and third party hardware
• Candidate should have knowledge on various protocols such as RS-232, GPIB, MODBUS, Ethernet,Devicenet, Profibus using NI LabVIEW.
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Ability to work independently with our clients for gathering requirements, preparing various test plans, coding & testing, Installation & support
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Knowledge of Project Development Life Cycle
• Experience in NI Teststand/ LabWindows
• Good Communication Skills
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLD (certified labview developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate to Pune
For Junior Labview Test engineer Position: (2-4 years)
Primary Skills:
• Candidate should have worked in NI LabVIEW for atleast 2-4 Years.
• Should be familiar with various NI toolkits and add-on modules like NI LabVIEW Report generation toolkit, LabVIEW Database toolkit,etc..
• Should have functional test development experience using various NI hardware modules (PCI, PXI, cDAQ, cRIO etc)
• Candidate should have good communication skills, presentation skills and interpersonal skills.
• Knowledge of analog and digital electronics that includes schematic reading and understanding
• Knowledge on Database, driver development, communication protocols
Niche Skills:
• Requires cross-functional engagement with Operations, Engineering, and Manufacturing.
• Project deployment at client site
• CLAD (certified Labview associate developer)
Added Advantage:
• Ready valid passport / VISA will be a plus point.
• Candidate need to travel abroad depending on project requirements.
• Shorter joining period.
• Ready to relocate toPune,India
Please Forward your updated profile to [email protected]

Dear Sir,
With reference to the website of your company I came to know that there always are the vacancies for the suitable candidates and hence I wish to apply for the same.Currently working in hydraulic environment I am approaching you through this application with great enthusiasm, that I have scope and chance to show my ability and contribute my efforts in well direction. I am enclosing here with my complete Curriculum Vitae .
I am currently working with M/s Minar Hydrosystems PVT. LTD. in Nagpur which is one of the largest manufacturers of hydraulic/pneumatic cylinders, jacks etc. I am In charge for quality department having complete knowledge of instruments with level II in non destructive and automated non destructive techniques. Also handling SAP module in current company with effective administration.
If you need further information regarding my candidature please do write/call me.
Thanks & Regards
Rushikesh P. Deogade
Nagpur, India
Ph.:- +91 9923858523
Attachments:
B.E. Mechanical with 3 years exp as a QC Incharge.doc ‏25 KB

Hi all ,i need a good documentation for a beginner in WORK FLOW ?

hi all ,
i need a good documentation for a beginner in WORK FLOW ?
please,try to send the attached documents as much as u can apart from giving the weblinks ?
hope you will send it soon ....
thanks & regards
vishnuvardhan k.v.

Hi
Developing a simple application using steps "User Decision" and "Mail"
Basic terminology used in the workflow:
The workflow definition is the set of rules that determine the path that the process takes. For example, how a purchase requisition is processed, from the initial request to the creation of the purchase order
A Workflow Instance, which is often simply referred to as the workflow, is a single workflow run. For example, the processing of a single purchase requisition for computers.
The Tasks are the steps in the process, which have to be performed either by people or automatically by the software. For example, to check for the availability of the spare computers in the company.
A Work item is the task instance that is performed as a single workflow step. For example, check that there are no spare computers available in the company.
Agents are the people who process the tasks (via the work items). For example, requisitioner and a member of the purchasing department.
Container is the place where all the data used in the workflow is collected.
Binding is the set of rules that define which data is passed to which part of the process.
Building a simple workflow application
The central tool for creating, displaying and processing a workflow is the workflow builder (Transaction SWDD). Within the workflow builder you can create all components of a workflow, including all the containers you need for getting the data from one step to another.
Generally, most of the workflows are started by an event (for example, when a material is created or when a new purchase requisition arrives). You define which data from this event needs to be passed to the workflow via binding.
However you can also start any workflow directly. Let us create a simple workflow and start the workflow directly, using the testing tools.
Call transaction SWDD. When the workflow builder is called for the first time, a newly created initial workflow definition appears or else last created workflow appears. In such cases you can opt to create a new workflow by pressing Create New Workflow(ctrl + shft + F5). The following screen appears.
The initial workflow screen has the following parts:
a. The start of the workflow definition, indicated by .
b. The end of the workflow definition, indicated by .
c. The area in which you insert the new workflow definition is indicated by .
Now select the undefined step and select Create step or double click the undefined step. Now among the different steps chose the User Decision by double clicking on it.
Developing a simple application using steps "User Decision" and "Mail"
Previous
Now enter the title for the user decision Please make a decision. Also enter the decision texts as Approve and Reject. On pressing enter, the outcome values default to the Decision texts but you can specify your own names, if desired. Now we need to select the agent. Agent is the person to whom the work item needs to be sent.. Since this is just a beginning, we would hardcode the user name. Select the User from the drop down list and enter the user name to whom the work item needs to be sent. In general, this type of agent assignment is not done. Agents are generally assigned using the expression, agent assignment rule or organization object (job, position etc.).
Now select Transfer and to graphic button. Following screen appears:
Now we need to include a mail step to be sent to the requestor. Now select the line Approve and do a right click. Different options on shown on the context menu. Select Create.
Now select the step Send Mail from the list.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
Now enter the subject and the body of the message for the mail to be sent.
Do not change the recipients. Our mail is intended for the persons who triggered this workflow. &_WF_INITIATOR& contains the value who executed the workflow. Since this is a test object, we are using &_WF_INITIATOR&. But we wouldnt be using this variable in real time scenarios. We would discuss about this in the coming documents.
Now select Transfer and to graphic button.
A popup appears requesting for the abbreviation and the name for this task. Enter the same and press enter.
Now enter the package as local object and press enter.
Follow the steps 5 through 9 for the step Reject. The following screen appears:
Press SAVE to save the workflow application. You need to enter an abbreviation and name for your workflow as shown below. You can change any of these at any later point. After saving, a number is assigned to your workflow starting with WS, as shown below.
Developing a simple application using steps "User Decision" and "Mail"
...Previous
To execute the workflow, activate it by choosing the activate button.
Test the workflow by choosing Test. The following screen appears.
Now choose Execute to start the workflow.
Now the recipient would receive a work item in his SAP® inbox (Transaction SBWP).
Now execute the work item by pressing Execute. The following screen appears:
Choose one among Approve or Reject as part of the user decision. He can select the third option to retain the work item in his inbox and make the decision later. Now suppose that the recipient has chosen one of the first options. Now a mail would be sent to the requestor with the status of his request.
Creating a Container element
This document details about creation of a container element in workflow and using it in the step "Mail".
Pre-requisites:
It is assumed that the reader of this Tutorial is aware of creating a workflow definition with the step Mail. If not, please go through the document on creating the same available, by clicking here.
Steps:
1. Create a workflow definition using the transaction SWDD.
2. Lets create a container element for Carrier id. Click on the Workflow Container on the left side of the screen (as shown in the screenshot below):
3. Now double-click on Double-Click to Create
4. Enter the details pertaining to CARRID here.
5. Click on tab Properties and select Import.
6. Click on Confirm (Enter).
7. Now the element created could be seen on the left side, below the Workflow Container.
Creating a Container element
Previous
1. Create a Mail step by double-clicking on Undefined step in the workflow.
2. Enter the recipient details in the Recipients box.
3. In the subject line, enter Carrid value entered is: and click on Insert Expression.
4. Select the element Carrid from the list.
5. Similarly enter the content in the Body area.
6. Save and activate the application.
Testing the Workflow application:
7. Test the workflow by clicking F8.
8. Enter the value of the Carrid as shown above and press execute.
9. A mail would be sent to the recipient mentioned earlier with the carrid value entered.
Condition Step
Agenda:
This document details about the steps Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Else.
Do this.
Click on Click here to create a new condition. Following screen appears.
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Enter the outcome names of your choice as shown above.
Click on Transfer and go to graphic.
As shown above, there are two branches here. One navigates to true, if CARRID = AA else the control takes the branch False.
Test the above scenario by inserting mail steps in the above 2 branches and by passing different CARRID values.
Condition Step
Agenda:
This document details about the steps Multiple Condition.
Pre-requisites: It is assumed that the reader of this document has a preliminary understanding of workflow and has worked with the container elements earlier. If not, please go through the first two Tutorials of workflow available in this site. (More details)
Procedure:
1. Create a new workflow definition.
2. Create a container element, CARRID (as demonstrated in tutorial 2).
3. Now click on undefined step and create the step Multiple Condition.
4. Enter the step name of your choice.
5. We would have the following condition here:
If carrid = AA.
Do this.
Elseif carrid = AH
DO this.
Elseif carrid = SQ
Do this.
Else.
Do this.
Select the CARRID using the F4 help for the comparison basis field.
Enter the values of the carrid under the Comparison values with the corresponding outcome name (of your choice)
Double click on Carrid. Next click on = and enter the value AA in the constant field and press ENTER.
Click on Transfer and go to graphic.
As observed above, there are different branches for each value of CARRID mentioned above.
Test the above scenario by inserting mail steps in all the branches and by passing different CARRID values.
Using "Container Operation" step
Agenda: Usage of step Container Operation.
Pre-requisites: It is assumed that the reader of this tutorial has worked in the concepts that are dealt in earlier tutorials. (click here for more details)
Scenario: In this tutorial, we would deal about how to work with the step Container Operation with an example of calculating the available seats by subtracting occupied seats from the maximum seats at the workflow level.
Procedure:
1. Create a new workflow definition using the transaction SWDD.
2. Create two container elements MaxSeats, Occ_Seats with the import property set. You can use the reference fields sflight-seatsmax, sflight-seatsocc for this.
3. Create another container element AvailableSeats without setting either import or export property as this is calculated within the workflow and used within the workflow. You might use any of the above reference fields as data types.
4. Define a new step Container Operation in the workflow definition by double-clicking on the Undefined step.
5. In this step, we would calculate the available seats from the max seats and seats occupied.
I would recommend entering all the container elements from the F4 help instead of typing them manually.
6. Return to the main screen.
7. Create a mail step after this to send the available seats information.
8. Test the above functionality by passing some values to the maximum and the seats occupied.
9. Result would be as follows:
Triggering Events Programmatically
Purpose: This document details the procedure in triggering the business object events programmatically.
Pre-requisites: It is assumed that the reader of this document is aware of the business object concepts and good in ABAP.
Procedure:
In this document, we would take an example of the business object BUS1001006 (Material) and the event CREATED. In general, this event is triggered whenever a material is created using a standard procedure like MM01 or any others. Now we would trigger this event from our own programs.
Following are the screenshots of the business object BUS1001006 and the event CREATED. Go to transaction SWO1 for more information of the business object.
Double-clicking on the key field parameter gives you technical information of the field.
In order to trigger an event programmatically, we would use the function module SWE_EVENT_CREATE.
Following is the sample code to trigger the events programmatically:
REPORT ZDEMO_TRIGGER_EVENT.
DATA: KEY LIKE SWEINSTCOU-OBJKEY.
KEY = '1163'. Material Number (hard-coded)
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
objtype = 'BUS1001006'
objkey = KEY
event = 'CREATED'
CREATOR = ' '
TAKE_WORKITEM_REQUESTER = ' '
START_WITH_DELAY = ' '
START_RECFB_SYNCHRON = ' '
NO_COMMIT_FOR_QUEUE = ' '
DEBUG_FLAG = ' '
NO_LOGGING = ' '
IDENT =
IMPORTING
EVENT_ID =
TABLES
EVENT_CONTAINER =
EXCEPTIONS
OBJTYPE_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
WRITE 'Event Triggered'.
ENDIF.
COMMIT WORK.
In order to test whether the event is getting triggered or not, we can make use of Event Trace. Switch on the event trace using the transaction SWELS.
Press Switch On.
Now execute the program developed earlier. Now switch-off the event trace using the same transaction SWELS.
Now go to transaction SWEL. Here you can list out the events triggered in the particular period of time. Here is the event-trace list:
Deadline Monitoring in SAP Workflow
A major advantage of workflow is the ability to monitor the workflow steps according to a predefined schedule. Following are different deadlines that can be monitored against each workflow step:
Requested Start
Latest Start
Requested End
Latest End
In this example, we will define a deadline to the User Decision example created earlier (click here). Following is the screenshot of the application developed using the User Decision example:
We would extend this example to the deadline monitoring.
In the User Decision step, click on the latest end tab.
By default, No deadline monitoring is active (as seen in the above screenshot).
Choose the Work Item Creation from the list box.
After selecting Work Item Creation, chose an offset of 5 minutes. This means that the work item must be executed within 5 minutes of the creation, if not this would trigger.
Deadline Monitoring in SAP Workflow
Enter recipient details to whom the message to be escalated, if the work item is not executed with in 5 minutes after work item creation.
Save and activate the workflow definition.
Testing the workflow application:
Execute your workflow.
Check for the work item in the SAP Inbox. This time do NOT execute the work item.
Wait for the deadline to be triggered. After that, a deadline message is delivered to the recipient mentioned in the Latest End tab. See the screenshot below.
Dont worry if the deadline message doesnt appear immediately after 5 minutes. This depends on various factors including how the deadline monitoring program is scheduled and also on the availability of the background processors.
Use SWWA to check how the deadline monitoring program is scheduled in program.
For example, assume that our work item has been created at 09:10 hrs and the deadline message is expected to trigger at 09:15 hrs. From the above screenshot, it is understood that the background program is scheduled to execute for every 3 minutes. Assume that the last run of the program is at 09:14hrs and the next run is expected at 09:17hrs. So even our deadline expires at 09:15, the deadline message would appear only at 09:17hrs after execution of the background program.
Some more points
In our above example, we have used the deadline on the Work Item creation time. i.e., 5 minutes after creation time, the deadline message would be sent. Now we would check the other option Expression. Here we can mention the date and time, when the deadline message should appear irrespective of the work item creation date/time.
As seen in the above screenshot, we can provide the target date and time by which the task should be finished. Container elements could be used in this case. Please refer to our example on creation of container elements (click here).
Personal Substitute in Workflow
Requirement: Need to have at least one substitute who can act upon work items in your absence.
Important: The appointed substitute would be able to see all your work items. A substitute cannot be assigned for only particular area of organization or any other item. So need to ensure that the substitute have the necessary authorizations to act upon the work items.
Procedure:
1. Go to SAP Business Work Place (TCode: SBWP)
2. Now from the menu bar, select Settings à Workflow settings à Maintain Substitute
3. Highlight/Select the name on the window, in this case SAPDEV02 and click on Create Substitute.
4. List of users available in the system are displayed.
5. Select the required substitute user name. Following screen appears.
Validity field describes about the period in which the setting would be active. Note that the dates on the screen would range from the current date to 31st Dec 9999.
Regarding the checkbox Substitution active, it is advised to leave this checkbox unchecked for system performance reasons. A check in this box indicates that the substitution is permanent and if left unchecked it is treated as as-needed. A permanent substitute will automatically receive the primary users work items in their own box. In the case of as-needed, substitute must manually adopt the work items from the primary users inbox.
6. Save the entries
7. Click Enter to leave the screen.
Adopting a Substitute in Workflow
If you have been designated as an as-needed substitute, you must manually adopt the substitution. If you are designated as a permanent substitute, the work items would automatically appear in the inbox.
Before adopting a substitution, there are 19 work items in the inbox. See the screenshot below:
To adopt a substitution, select Settings à Workflow settings à adopt substitution.
Select the corresponding User-id (if you have been assigned as a substitute for multiple people, then this option would allow you to select the user name of whom you would to check the work items)
The corresponding users work items would appear in our inbox now.
You can end the substitution, by selecting settings à Workflow settings à End substitution.
Note: Substitutes can only adopt work items that are directly routed to the person for whom they are a substitute. If you are a substitute for a user (SAPDEV02) who has been made a substitute for another user (SAPDEV01), you will only see work items for user SAPDEV02 and not of the user SAPDEV01.
Notification of Work Items via e-Mail
SAP provides us with a facility of notifying the user via the email address of your choice when there are any pending work items in the SAP Inbox..
1. Go to Transaction SO13.
2. Click on Automatic Forwarding tab.
3. Click on Create icon .
4. Enter the details in the above screen.
5. Click ENTER to complete the entries.
6. Now the notification would be received at the provided email address if there are any pending work items in the inbox.
Filtering the Work Items in the SAP Inbox using BADI
This document details about the procedure in filtering some of the work items from the SAP inbox using a BADi.
Following is the screenshot of the SAP inbox, before implementing BADi:
The BADi that is used in filtering the work items is WF_BWP_SELECT_FILTER. To implement the BADi, go to transaction SE18. From the menu, select Implementation à Create. (See the screenshot below)
Enter the implementation name and press ENTER
Enter any meaningful short text for the implementation and click on the tab Interface
The implementing class, ZCL_IM_BWP_SELECT_FILTER, is automatically proposed. Double click on the implementing class name.
You are now navigated to the class builder. Now double-click on the method name shown on the screen (see the snapshot below)
Now let us filter out the work items belonging to the task TS2000066. See the code below:
Activate the method and also the implementation. In the state of active, you wouldnt be able to make any changes. To make any changes, we need to deactivate it and then make the changes.
Now check the inbox and would notice that the work items related to that task are no more appearing.
To notice the differences, try activating and deactivating the BADi implementation.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/42/c14a9b55103116e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
http://www.sapgenie.com/workflow/
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
http://www.sap-basis-abap.com/wf/sap-business-workflow.htm
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2857887
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2855919
https://forums.sdn.sap.com/click.jspa?searchID=791580&messageID=2735228
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMSTART/BCBMTWFMSTART.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPM/BCBMTWFMPM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
debug a workflow.
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440

Which tool do you use for load testing?

Which tool do you use for load testing for J2EE application?

hi,
i use jmeter for without issues..
first make sure that the system from where you are doing load testing is in the same lan(without firewall) to that of server. Here you are testing the capacity of server and not the network bandwith.
So assuming very good network connection what is the servers performance level...
If u have to decide which tool is decent enough to load testing,
i would suggest go for jmeter. its reliable and i have used it without problems.
Here is my quick tutorial for jemeter which i made for my teams reference.
REFERENCE
     For Getting Started refer to any tutorial for Jmeter
     You can refer to introduction on
          http://jakarta.apache.org/jmeter/usermanual/
RUNNING LOAD TEST
     Extract jakarta-jmeter-2.3RC4.zip in c:
     install jdk-1_5_0_12-windows-i586-p.exe
     Run C:\jakarta-jmeter-2.3RC4\bin\jmeter.bat
     In Test Plan add Thread Group
     Right Click Thread Group -> Add->Sampler->HTTP Request
     Select HTTP Request added fill details
          Serverip:www.xyz.com
          Port:80
          Path:/xyz-webapp/index.jsp
          Use KeepAlive: Checked
          Retrive All Embeded images from HTML: Checked(For geting images inside html)
     Right Click Thread Group -> Add->Listner->Graph Results
     Click on Thread Group Fill details
          No of Threads:3(This means no of simultaneous users)
          Ramp Up Period:1(3 Request will be made in 1 second period)
          Loop Count:5(Above process should be repeated how many times)
     Save TestPlan
     Run -> Clear All
     Run -> Start
          Click on Graph Results for Output
     Try adding different listener in Thread Group
          Thread Group -> Add->Listner->Summary Report
     Listeners coud be added at thread group level or HTTP Request Level
RECORDING A TEST.
     Add a HTTP proxy server in workbench by right clicking on it and selecting Add->Non test Element->HTTP Proxy Server.
     In Test Plan Add Thread Group
     In HTTP proxy server select Target Controller as Test Plan > Thread Group.
     Go to Internet Explorer and go to internet settings and set proxy server as localhost and the port
          which is configured in Jmeter proxy server.Save Settings.
     In Jeter proxy server start by Clicking on Start button in the HTTP Proxy Server Flap.
     In browser navigate the application which you want to test.
     The nodes will be added in the Thread Group.
     Once Navigation is done stop the proxy server and save the test plan from file menu.
LOGGING INTO APPLICATION.
     When we have to login into system and then navigate the system
          we need a cookie to be tracked after login. This could be achieved
          simply by Add -> Config Element -> HTTP Cooie Manager.
     After adding the HTTP Cooie Manager simply run the test.
LOOPING COUNTER.
     When a request is made multiple parameter is sent to server.
     Parameters are sent from the HTTP Request node added in the Thread Group
          in "Send Parameter with the request" table.
     If we run the loop count 10 times the parameters will be sent same in every request.
     If you have to send parameters like user1,user2,user3,user4....
          then add -> Pre processor -> Counter.
     Put start as 1 and and Maximum as 10 or whatever required.
     Put Referene name as iCtr or whatever.
     In the "Send Parameter with the request" in value column put user${iCtr}

Looking for quality, hard to find instrument samples

Hello,
I'm a traditional (acoutic) Korean drummer/musician looking at going going electric (both for composing and later performing these virtual instruments on stage).
I would like samples of Korean instruments in my computer to trigger and/or make loops.
I can try making samples by recording my instruments on my own, but I'm willing to pay for quality rather than make them on my own. Also I don't have all the instruments I would like.
Can you tell me where there might be even the possibility of quality Korean instrument samples?
Thank you in advance for you help.

just visited your website, looks like you have a great group going there.
actually looking at the photos on your site made me think, you'd be best off getting in there and sampling the instruments yourself.
you'll probably find a bunch of stuff out there to buy.. but I think it would be a shame if you just hobbled together a bunch of more or less generic asian percussion samples just because that's all you could find. if you're an expert in these instruments and in the musical tradition of it all, you're in a really great position to really understand the dynamics of the sounds they make and how best to capture it all, so that you get similar playability from your sample set.
I'd start off by doing some test runs and experimenting. record some of the instruments you do have and that you play yourself. get your hands on the best stereo mics you can find, a nice room to do it in, and a nice preamp/converter.
once you've tracked a whole bunch of hits and whatever else you can produce with an instrument, spend some time editing it all up and then try out some mapping in the EXS24 to see how it plays. you'll quickly find out what works best. then once it's all working out for you and you've got a technique down, you could set up a day in a studio and get as many players and instruments in as you can. record the bejeezus out of them, knowing that you can then go and edit and keymap it all later.
it can be a lot of work, but there's nothing quite like roll-your-own sampled instruments, especially when you are someone that really understands what a particular instrument is capable of in terms of range of sound. you'll really be able to get in there and capture so much more of the nuances that these instruments can produce than someone that just stuck a mic in front of something they didn't understand and hit it with a stick. and then with your multisamples and velocity layering, you'll be able to tweak it so much better to play authentically cos you know what to listen for.
also consider this. if you have a clear focus on what kind of positive contribution doing this work could have to the music and performances of your group, you might be able to apply for a community arts grant in order to really do a good job of this. you could afford to get into a nice sounding studio with good choice of mics and an engineer to help it go well, as well as some budget to bring in players to capture the unique sound of their instruments. community arts bodies can be quite positive about funding this sort of thing, when it involves archiving traditional art and culture within your community, and also contributes to the continued development of more creative work at the same time. food for thought anyway.

Is Pages Good Enough For Professional Printing?

I'm looking to do an Large Format Brochure (11" x 17") single fold and I've been using Pages for the mock up and layout. I was thinking that I would need someone to recreate the design in Quark, or Pagemaker, but now I'm wondering if I can do it all in Pages.
The printer that I plan on using is PSPrint (http://www.psprint.com/) and according to their offset printing specs and template, I just have to provide them with a 300dpi PDF. From what I've tested, exporting to PDF with quality set at "Best" I get a 300dpi file.
I haven't tested my output with photographs yet since we haven't purchased the final images and are using comps, but am I wrong in thinking that Pages is good enough for this project?
Template: http://www.psprint.com/DOWNLOAD/templates/brochures/brochurehalffold_11x17front.pdf
Thanks in advance!

There is no way to save out of Pages to pdf without flattening the transparency.
Proposition: In any save path, transparency is flattened in saving.
Test of proposition: Apple Pages '08 and Apple Mac OS X 10.4.11 as platform.
1. Launch system software and application software.
2. Insert first composition frame, select Apple Hoefler antiqua at 24 US pt, enter 'Type', leave default colour, leave default opacity.
3. Insert second composition frame, select Apple Hoefler antiqua at 24 US pt, enter 'Transparency', change default colour to rubrication red, change opacity to 50%.
4. Select e.g. File > Print > PDF > Save as PDF, name file 'Test', and select folder.
5. Launch Acrobat Professional 6 (first version with ISO 15930 PDF/X-3 verification), check the PDF version (: 1.4), check at high magnification (: no rasterisation), check that the source character string can be synthesised (: it can).
As posted previously, if transparency is applied, PDF 1.4 is automatically configured unless the path is ISO 15930 PDF/X-3 that does not support transparency (PDF 1.3 has an opaque imaging model, not a transparency imaging model). This is a simplistic test, but it is nonetheless a test.
Because Apple Quartz has applied transparency since 2000, and because there the matrix of system versions and application versions is somewhat monstrous, the notion of testing is somewhat notional .
/hh

Codec configuration for codec test in term paper

Hi,
After two hours of searching a support email address or form I decided to sign up to this discussing forum - maybe someone can help me here.
Dust Signs
Dear Sir or Madam,
I am writing to enquire about using information on your codec for research purposes.
My name is Andreas Unterweger, I am a student in the degree program "Information Technologies and Systems Management" at the Salzburg University of Applied Sciences. In the winter semester 2006/07 I will be doing research on the video quality that can be achieved with various codecs under certain (challenging) circumstances (low bitrate combined with detailed scenes and/or fast motion).
For this purpose, I also selected your codec "QucikTime Pro for Windows". To achieve the best results possible, it would be helpful for me if I could ask you to send me a configuration for this codec which you think would be ideal to encode a short scene (source and motion velocity varies) with a resolution of 720x576 and a bitrate of about 1000kbps until the mid of October. If it's not possible for you to send me a configuration, I'll try to figure out the most ideal configuration possible myself.
Because your codec is not free of charge, I also wanted to ask you if it would be possible for you to provide a cheaper or free of charge version of the codec for the tests required. The codec will of course only be used for encoding and decoding procedures related with my research.
If you are interested in the results, I will be pleased to send you a copy of my the documentation in my term paper by the end of the winter semester, January 07.
Thanks in advance
Yours sincerely
Andreas Unterweger
Athlon 64 X2 4200+ Windows XP Pro

Thanks for your answer. I know that the Pro upgrade includes everything I need for the test for my term paper. As I already said it's a matter of cost - QT H.264 is not the only codec I'd like to test, so I decided to write an email to the companies producing the codecs I want to test - hoping that some offer cheaper or free of charge versions of their codecs (I don't use them privately - they will only be used for the test for the term paper). If I receive some offers, I'm very glad, if I don't, the amount of money provided by the university will be the selection criteria for the codecs (which I personally would not prefer because it would definitely reduce the number of codecs to the free of charge ones and one or two which can would be purchased).
Dust Signs

This is a good opportunity for individuals that like variety.

Software Developer / Systems Engineer
Small company experiencing growth is seeking a new team member with recent high-end LabVIEW programming experience and an interest in systems engineering and integration. Potential candidates with PC based data acquisition and control experiences are preferred. This is a good opportunity for individuals that like variety.
RESPONSIBILITIES & REQUIRED SKILLS:
• Maintain and update existing LabVIEW applications as updates become necessary.
• Take charge of multiple and concurrent projects pertaining to existing and future software requirements and the related testing for transition to manufacturing.
• Perform training of company service personnel after modifications to existing products or development of new products.
• Develop solutions and assist in the resolution of issues with existing product related software.
• Participate in development discussions and provide engineering assistance in the resolution of technical problems relating to production, user related issues, testing, etc.
QUALIFICATIONS:
To perform this job successfully, an individual will have at least two years of high-end LabVIEW programming experience and a willingness to learn and develop new systems (hardware/software). The requirements listed below are representative of the knowledge, skill, and/or ability required.
• Experience in high-level LabVIEW language programming
• National Instruments, LabView Advanced Applications Development experience a plus.
• Ability to troubleshoot hardware problems at the board level.
• Ability to lead several, concurrent product development projects while maintaining project schedules.
• Knowledge of basic design and experiment methodologies is required.
• Experience with SolidWorks is a BIG PLUS.

Hi
I am interested in this opportunity. What is the email address where I can send my resume to ?
Thanks
Kudos always welcome for helpful posts

Doing a goods receipt for a customer material that is ASEQ status

We are needing to find a way to be able to do a goods receipt for a child part in ASEQ status. Most of our customers will send in their part after disassembling it themselves. Since we can not receive the part our present process is to dismantle so the system status changes to ESTO and we can receive. The problem with this is that the end user forgets to assemble the part back and we end up breaking the linkage.
We have looked into using User Status in the equipment master and have configured that. However the user status button, nor name shows up in the equipment master. I have looked at the field selection in IMG and it is not hidden. I am assuming it is being supressed by a user exit we have.
Can anyone give me any suggestions on how we can improve the process using SAP for material that is ASEQ status and being able to create an inbound delivery so we can receive in our warehouse for this status without dismatling the unit?
We are on ECC

Hello Kimberly
You lost me while describing your current process, so please provide more details as to how you dismantle and reinstall etc. Also how the part goes back to the customer.
However I can provide you clarifications to some questions you raised..
You see both system and user statuses in the field 'Status' itself. This is the 3rd row in the Equipment display screen under Equipment number and Description. If you see carefully you will see 2 sections, the one on left is system status and the one on right is User status. If you click on the i (info) icon, you will be taken to a screen where you see more info like status and business processes etc.
ASEQ is a system status and it is determined by what you did ( example dismantling) and can't be changed by you (user). If you see the 'Business Processes' tab, you will also see the this won't allow assignment to a Delivery and so on. So my point is having a user status will not help you. Based on the combination of system and user statuses, some processes are permitted, some not. For example if Goods Receipts are allowed, may be you can receive without an Inbound delivery. I am mentioning this as a thought initiator, I know you will have a Return/Repair order process including a return delivery.
I guess you have to systematically prevent the user from doing whatever they are doing out of turn, e.g., forgetting to reassemble (install?) and for this User statuses can help.
Let us know your process more in detail and I am sure SAP will have a standard way to receive a child part of a big assembly. Other members will share their practices also.
Take care.

Goods send for quality testing

Similar Messages

Maybe you are looking for