Goods transport between WH and Prod area via Material Staging

Gurus,
I got my components from Warehouse to Storage Type 100 (default) using Staging. Now I confirmed my Production Order. So the Storage Type 100 should show my final product and 0 stock of components right?
It still shows all the components in Storage Type 100 and no FINAL Product. Also in the Prod Order Confirmation screen it does not show any Goods Movements. I read it should show "5 transactions processed and 0 failed" on Prod. Order Confirmation, but I do not see the message on co15.
Look forward to your replies
Regards,
Vikas

Hi,
Storage location control should be able to take care of your problem.
If you want to stage the material to a different IM location then the WM location then make the following settings
If location xxxx is your WM location and location yyyy is your Production location.
You have defined Production storage type ZZZ for production storage location YYYY and have maintained the supply area for the same
In WM configuration - For interfaces - IM interface-Control of Assignment "Plant / Stor.Loc. - Whse Number"
Assign location XXXX as the Standard Location. Maintain entry donot copy sloc in TR for location YYYY
In WM configuration - For interfaces - IM interface- Storage Location control for WH
This entry ensures that there will be a WM tarnsfer Posting between your WM and Production storage Location automatically when you confirm your TO. You can have this done via a btach job also if you want cumulative posting. (schedule job RLLQ0100)

Similar Messages

Performance problems between dev and prod

I run the same query with identical data and indexes, but one system takes a 0.01 seconds to run while the production system takes 1.0 seconds to run. TKprof for dev is:
Rows Row Source Operation
1 TABLE ACCESS BY INDEX ROWID VAP_BANDVALUE
3 NESTED LOOPS
1 NESTED LOOPS
41 NESTED LOOPS
41 NESTED LOOPS
1 TABLE ACCESS BY INDEX ROWID VAP_PACKAGE
1 INDEX UNIQUE SCAN SYS_C0032600 (object id 51356)
41 TABLE ACCESS BY INDEX ROWID VAP_BANDELEMENT
41 AND-EQUAL
82 INDEX RANGE SCAN IDX_BE2 (object id 53559)
41 INDEX RANGE SCAN IDX_BE1 (object id 53558)
41 TABLE ACCESS BY INDEX ROWID VAP_BAND
41 INDEX UNIQUE SCAN SYS_C0034599 (object id 53556)
1 INDEX UNIQUE SCAN SYS_C0032549 (object id 51335)
1 INDEX RANGE SCAN IDX_BV1 (object id 53557)Tkprof for Prod is :
Rows Execution Plan
0 SELECT STATEMENT MODE: ALL_ROWS
1 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'VAP_BANDVALUE' (TABLE)
52001 NESTED LOOPS
26000 NESTED LOOPS
26000 NESTED LOOPS
26000 NESTED LOOPS
1 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'VAP_PACKAGE' (TABLE)
1 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'SYS_C0018725' (INDEX (UNIQUE))
26000 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'VAP_BANDELEMENT' (TABLE)
26000 INDEX MODE: ANALYZED (RANGE SCAN) OF 'IDX_BE2' (INDEX)
26000 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'VAP_BAND' (TABLE)
26000 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'SYS_C0030648' (INDEX (UNIQUE))
26000 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'SYS_C0018674' (INDEX (UNIQUE))
26000 INDEX MODE: ANALYZED (RANGE SCAN) OF 'IDX_BV1' (INDEX).The row count varies greatly. But it shouldn't as the data is the same.
Any ideas?

From DEV you show the Row Source Operations for the query. The column named "Rows" signifies the actual number of rows processed with each step.
From PROD you show the Execution Plan for the query; that is, tkprof was executed with the EXPLAIN option which generates the execution plan as of the time when tkprof was run. The "Rows" column in the Explain Plan output comes from the PLAN_TABLE.CARDINALITY, which represents an estimate by the CBO for the number of rows [expected to be] processed with each step.
So, if by <quote>The row count varies greatly</quote> you meant these "Rows" columns outputs then you're are comparing actuals from a database with estimates from another. Get the Row Source Operations from both.
"Identical data and indexes":
1. data may be the same, but it is not necessarily stored physically the same way.
2. Indexes being the same means their definitions are the same; again, physically they are not necessarily identical
In other words, data in PROD (the way it is stored on disk) may have evolved as a result of discrete deletes/updates/inserts ... in DEV it could be, for example, stored more compact if you took a copy of PROD and moved into DEV. So, the number of blocks for your segments will likely be different between PROD and DEV, the clustering factor for your indexes are likely different, etc ... things which could [and do] influence the CBO. The statistics may be different.
I guess what I'm saying is ... it is quite hard, if not outright impossible, to get two identical databases/instances/load ... hence, don't expect the executions to be 100% identical, even if you have "identical data and indexes". By all means compare between DEV and PROD (make sure you compare the same thing though) and use the observed differences as an indicator for further investigation ... don't chase the goal of 100% identical behavior.
Now, by all means look at that query taking 1 second in PROD ... I have only addressed <quote>The row count varies greatly. But it shouldn't as the data is the same.</quote>

Consistency between dev and prod systems!!!!

Hi All,
I wuld like to check the consistency between Dev and Prod systems for all the Data model and other objects existing. I would like to do this sanity check to see whether the two systems are in sync. Are there any tools or transaction codes within SAP framework which can guide me in this direction.
Kind Regards,
Surya Tamada.

Hi Surya ,
First build whole data flow :
1 .Create Infoarea ,Infoobjects & Masterdata ,Infoproviders ,Infoobject Catelog under Infoarea,MetaData - Characteristics MeteData - Key Figures
2 DSOs ,Infocubes ,Infosets, Multiproviders ,Views in the development system ,Datasources for BW system,Flat File Datasources,Transformations
then get data from the se11 tables as per your requirement :
like RSDVCHA ,RSDBCHATR,RSDCUBEIOBJ,RSDICMULTIIOBJ etc and built view on it as per your requirement .
then built flat file data sources and transformation .
get all data downloaded to flat file in ur PC .In the same way from other system.
make flow from PC File Datasource -> DSO -> Infocube and build queries for different objects .load the downloaded files to them and then run query .
ex : query to compare cube will take cube name and systems name as input and compare objects .
Regards,
Jaya

Urgent :Relation between vendor and business area

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hi ,
Is there any table or transaction which will give an one-to-one relation between vendor and business area?
Thnks and Regards,
Anand

hi
in this situation u have to creat new Z table and Z transaction with link of this both . it will solve ur problem . better to take abaper help other wise u can use T-CODE se11 to creat table.
se93 for transaction code .

Relation between Responsibility and Business Area

Hi,
I have a requirement wherein i have to make a particular workbook available in specific responsibilities.
Now when i have to create a folder then how do i know in which Business Area should i create the folder.
Basically i need to know the relation between Responsibility and Business Area i.e which Business Area i should create the folder so that it is visible in desired responsibilities.
Is there any way possible i can know this.
Regards,
Shruti

Hi,
You can do that in two ways:
1. Go to the administrator and check the sharing BA for each responsibility you require.
2. Query the database to retrieve the sharing.
Do whatever you find easier.
For the database option you can run the following (change it to your own schema name):
select distinct
t.ba_name,
t.ba_id,
t.ba_description,
case when substr(t.ba_created_by,1,1)='#' then fu.user_name else t.ba_created_by end as CREATED_BY,
disco_users.eu_username,
case when instr(disco_users.eu_username,'#')=0 then disco_users.eu_username
when instr(disco_users.eu_username,'#')>0 and instr(disco_users.eu_username,'#',2)=0 then (select fu.user_name from fnd_user fu where fu.user_id=substr(disco_users.eu_username,2,5))
else (select resp.responsibility_name from fnd_responsibility_tl resp where resp.responsibility_id=substr(disco_users.eu_username,2,5))
end as "Shared Name / Responsibility"
from eul_us.eul5_bas t,
apps.fnd_user fu,
eul_us.eul5_access_privs disco_shares,
eul_us.eul5_eul_users disco_users
where substr(t.ba_created_by,2,10)=to_char(fu.user_id(+))
and t.ba_id=disco_shares.gba_ba_id
and disco_users.eu_username(+) NOT IN ('EUL5', 'PUBLIC')
AND disco_users.eu_id(+) = disco_shares.ap_eu_id
Hope it helps
Tamir

Relation between Company and Personnel Area

Hello friends,
Which table i can find the relation between companies and personnel areas ?
I found T001P, but this table has only the relations between personnel area and personeel subarea...
Thanks for your help.

Hi,
Personnel area - company code assignment : V_T500P
Company - company code assignment : V_001_Y
Regards,
Dilek

What is the difference between Structure and Work area

Hi Guys,
What is the difference between Structure and work area?
Are they same with different names?
Thanks,
mini.

hey buddies,*
i had this same doubt for a long time and i have my finds with me ie wa and structure are the same but wa can hold a single record but structure cannot hold data in it but according to the previous posts folks say structure too holds data as wa does but i guess when debugging wa holds data and structure doesnt hold bcoz i tried.
types : begin of str_mara,
             matnr type mara-matnr,
            ernam type mara-ernam,
            end of str_mara.
data it_mara type table of str_mara.
select matnr ernam from mara into it_mara where matnr = '100-101'.
*********************if folks say wa = structure,this should work,isn't it?*********************************
loop at it_mara into str_mara.
write:/ str_mara-matnr , str_mara-ernam.
endloop.
*******************but it throws an error saying that str_mara is not a wa*******************************
i may not be correct too plz let me know if i'm wrong
Edited by: arun_aime on Feb 12, 2010 4:41 PM

Automation of transports between DVL and QAS environments

Hi,
Does anyone know how to automate the transports between the DVL and QAS environment ? When we release a transport in the DVL environment, we would like this transport to be copied in the QAS environement automatically, without having to copy it manually from DVL to QAS.
Thanks,
Julien

Hi
if this is generally about transporting PI content through the landscape then your solution is very likely to use CTS as transport system for PI. Further information can be found on https://wiki.sdn.sap.com/wiki/display/SL/SoftwareChangeManagement
Especially the section 'What is CTS' and 'SAP NetWeaver Exchange Infrastructure (XI / PI)' will be interesting.
If you are already using CTS and the question is if and how the automation can be configured then the answer is: yes, it can and it has to be done in the same way as for ordinary ABAP transport - even for PI content - via a scheduling.
Regards
Frank
Edited by: Frank Misch on Apr 29, 2009 4:31 PM

Field Status review between Dev and Prod.

Hello All,
During solving one of the ticket, I found that there are some difference in selection of some of fields as suppress,optional and compulsory for account groups with screen layout (customers) - (T. Code - OBD2) between Development and Production server. Now I would like to test for all account groups between Prod and Development.It is taking lot of time to see screen by screen.
Can any body throw some light on this regarding any alternative way or can we download table information ?
Thanks in advnace for your cooperation.
Regards,
santosh

Try this:
transaction: SE16
Table: T077D
Execute
Do same in both systems and compare.
Once you identified differences go back into the transaction as mentioned - OBD2- for detail analysis.
GL
Hein
Please assign points if helpful.

Can I begin service with $100.00 card good for one year and what are the usage terms?

Can I begin prepaid service with a $100.00 card good for one year and if so what are the usage terms?

Yes; phone is for Verizon PREPAID plans. Sri I did not state that correctly. I see that there are prepaid plans with monthly usage etc. I see some offers on line for a $100.00 card that's good for one year. Trying to determine if that is available from a Verizon store to begin a new plan. Checked with two different Verizon stores and got two opposite answers and neither was sure of the terms. Simply trying to get a low cost backup. Thank you for responding.

Any way to video chat between Messages and older Mac via iChat?

I upgraded to Mountain Lion yesterday and am beginning to regret it - I discovered that I will no longer be able to help my parents troubleshoot their MacBook as they have an older MacBook with Leopard 10.5.8, and their MacBook is not upgradeable to Mountain Lion given its heritage (too old). Prior to my upgrade to Mountain Lion, when they needed help we would both launch iChat and I would ask to take control of their screen. Their account setup on iChat was through an AOL AIM username.
I looked into whether I could still launch a video sharing session with them using Messages from my end and they using iChat from their end (still with their AOL AIM username) but can find no evidence that that will work.
I am hoping that someone has figured out how to make all this work. I researched FaceTime and it doesn't appear that it supports video chatting/screen sharing.
My last ditch option will be to see if I can gain access to their machine via internet remote access - but I'd rather steer clear of that.
Anybody know how to make this work - video chat and remote screen control between my Mac running Mountain Lion 10.8.2 and remote Mac running Leopard 10.5.8?

Apologies if this is what you linked to... I cannot open the link on my office PC.
Have you tried the ReelPortal app? This should be able to cover both of your needs: it allows video chat between Playbook and PC, and essentially broadcasts the video chat to a site. (I have not attempted to capture the broadcast). It's not the prettiest app out there, but does what you're looking for.

Horizontal separator line between masthead and tool area

hi all
we have customized the portal masthead with our own background image and all.
however the masthead looks fine in IE but in Mozilla it puts a white horizontal line between the masthead and tool area and since our tool area background is not white it looks wierd.
any ideas how i can fix that.
thanks

Rather than use one of the selection tools, try selecting the object with a mask. With the mask you can hide by painting with a black brush, reveal (and correct) with a white brush. I use PSEv.8, so I have to hijack the mask from an adjustment layer, but your version of the program has a mask buit in.
Here is a stock photo of a brick wall for demonstration
http://www.pixentral.com/show.php?picture=1bPkncRl9f24RslkWKdP0NyaYIt9N1
Try this:
Open you picture file
Duplicate the background layer
Convert the background copy layer to black/white
Apply the mask. Left click on the mask
Paint with a black brush where you want to reveal the color. If you go too far, correct with a white brush

Uniform gap between Caption and Fillable Area

Dear all,
I want to mentain Uniform gap between the caption and fillable area for all the fields.We can adjust the gap manually but it's difficult to mentain uniform for all the fields.Can we do it by Java script or by any other way so that it should exactly same for all the fields.If any body can please help me.
Thanks a lot in Advance
Regards
Rakesh

Dear Jimmy,
Thanks a lot for your quick response.But the size of the caption of the fields i.e. no of letters present in the caption are not same.Suppose one field is Name and another field is Adress.How can I set the the two fields such that the gap between the caption and fillable area for the two fields are same.If the gap will same then the form will look better.I can Adjust this manually but it will not same exactly.
Regards
Rakesh

Java proxy client logical port transport to Q and prod issue in target addr

Hi All,
I have a java proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
Thx
mike

Hi Michael,
I can only help from that point of view that I believe this question belongs to the forum
Service-Oriented Architecture (SOA) and SAP
Please try to raise this question there.
Thanks and Regards,
Ervin

Bug between JRockit and X11 forwarding via ssh

I have encountered what appears to be a bug in the interaction of JRockit with X11 ssh forwarding.
When running any Java GUI application on a remote machine using X11 forwarding via ssh, a variety of problems occur. For example:
--- cut here ---
% mitrion-ide
The program '' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAtom (invalid Atom parameter)'.
(Details: serial 189 error_code 5 request_code 20 minor_code 0)
(Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)
--- cut here ---That's the good case. When running the rmmlite application (available at https://rmml.dev.java.net/servlets/ProjectDocumentList?folderID=437&expandFolder=437&folderID=438 ), I experience what appears to be a near-lockup of my local workstation.
Neither of these problems occur if I set my DISPLAY to not use ssh X11 forwarding. Likewise, non-Java applications work just fine with ssh X11 forwarding. Therefore the problem seems to be limited to the Java + ssh X11 forwarding combination.
I have a suitable workaround (i.e. setting the DISPLAY variable to avoid ssh X11 forwarding), but I thought this was worth bringing to BEA's attention. I'd also be curious to know if others have run into similar difficulties.
Here are the configuration details:
Remote X11 client (where applications are hosted)
=================================================
% java -version
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
BEA JRockit(R) (build R27.1.0-109-73164-1.4.2_12-20061129-1418-linux-ia32, compiled mode)
% uname -a
Linux earthling 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:54:53 EST 2006 i686 athlon i386 GNU/Linux
% rpm -qa | grep openssh-server
openssh-server-3.9p1-8.RHEL4.12
This is a vanilla RedHat Linux RHEL 4 Update 3 system, with all other versions of Java removed.
Local workstation (i.e. X11 server)
===================================
% uname -a
FreeBSD somewhere.sgi.com 6.2-RELEASE FreeBSD 6.2-RELEASE #5: Mon Jan 15 08:41:01 CST 2007 [email protected]:/usr/obj/usr/src/sys/somewhere i386
% ssh -v
OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.7e-p1 25 Oct 2004
% pkg_info -Ix xorg-server
xorg-server-6.9.0_3 X.Org X server and related programs
Thank you,
Brent Casavant

Brent,
it would be nice to know if this problem is specific to the JRockit JDK or
if you also can reproduce it using the corresponding Sun JDK 1.4.2. Please
do also try with a later version such as latest JRockit JDK 5.0.
Thanks
/Robert
<Brent Casavant> wrote in message news:[email protected]...
I have encountered what appears to be a bug in the interaction of JRockit
with X11 ssh forwarding.
When running any Java GUI application on a remote machine using X11
forwarding via ssh, a variety of problems occur. For example:
--- cut here ---
% mitrion-ide
The program '' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAtom (invalid Atom parameter)'.
(Details: serial 189 error_code 5 request_code 20 minor_code 0)
(Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)
--- cut here ---That's the good case. When running the rmmlite application (available at
https://rmml.dev.java.net/servlets/ProjectDocumentList?folderID=437&expandFolder=437&folderID=438 )
, I experience what appears to be a near-lockup of my local workstation.
Neither of these problems occur if I set my DISPLAY to not use ssh X11
forwarding. Likewise, non-Java applications work just fine with ssh X11
forwarding. Therefore the problem seems to be limited to the Java + ssh X11
forwarding combination.
I have a suitable workaround (i.e. setting the DISPLAY variable to avoid ssh
X11 forwarding), but I thought this was worth bringing to BEA's attention.
I'd also be curious to know if others have run into similar difficulties.
Here are the configuration details:
Remote X11 client (where applications are hosted)
=================================================
% java -version
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
BEA JRockit(R) (build R27.1.0-109-73164-1.4.2_12-20061129-1418-linux-ia32,
compiled mode)
% uname -a
Linux earthling 2.6.9-34.ELsmp #1 SMP Fri Feb 24 16:54:53 EST 2006 i686
athlon i386 GNU/Linux
% rpm -qa | grep openssh-server
openssh-server-3.9p1-8.RHEL4.12
This is a vanilla RedHat Linux RHEL 4 Update 3 system, with all other
versions of Java removed.
Local workstation (i.e. X11 server)
===================================
% uname -a
FreeBSD somewhere.sgi.com 6.2-RELEASE FreeBSD 6.2-RELEASE #5: Mon Jan 15
08:41:01 CST 2007
[email protected]:/usr/obj/usr/src/sys/somewhere i386
% ssh -v
OpenSSH_4.5p1 FreeBSD-20061110, OpenSSL 0.9.7e-p1 25 Oct 2004
% pkg_info -Ix xorg-server
xorg-server-6.9.0_3 X.Org X server and related programs
Thank you,
Brent Casavant

Goods transport between WH and Prod area via Material Staging

Similar Messages

Maybe you are looking for