GR posting with Under/Overdelivery Flag

Hi,
when posting a GR (Inbound-Delivery) where an info record is behind the material,
and for the info rec the under/overdelivery flag is maintained it comes to following situation:
The overdelivery flag is recognized proper, means it works, whereas for the underdel-flag it doesnt work:
I can enter what I want, each delivery quantity is accepted.
Does anyboday have an idea??
Regards
Thomas

Hi,
Would you please refer the IMG documentation of these tolerance keys
in customizing path?
Txn OLMB>Goods Receipt >Set Tolerance Limits
click on IMG documentation.
The different types of variances are defined by tolerance keys. For
eachtolerance key, tolerance limits can be set per company code.
The following variances are checked in Inventory Management:
o   Variance in the purchase order price quantity
     (Explanation)
     For this variance, two tolerance keys are provided:
     -   Tolerance key B1 (error message)
         You use tolerance key B1 to define the maximum percentage
         variance. If the variance is greater than the maximum variance,
         the system creates an error message. The user cannot post the
         goods receipt.
     -   Tolerance key B2 (warning message)
         Tolerance key B2 defines the percentage variance from which a
         warning message is to be issued. It is possible to post the
         goods receipt.
For example, you have PO where orde unit is PC and order price unit is
EA and converstion between these unit is 1 PC = 10 EA/
1. PO order qty 1 PC
price unit EA
Price      10 EUR/ 1 EA
converstion between order unit and price unit     1 PC = 10 EA
2. Now if you do a GR and at quantity tab, you enter qty in price unit
"Qty in PO Price Unit" as 15.00 EA(>10 EA according to converstion
factoer), then over delivry tolernace B1/B2 will be used. If over
delivery tolerance is exceeded then system issues warning or
error message "Message no. M7029 : Order price quantity exceeded by
more than %"
3. If qty in price unit is entered in MIGO lower than 10 EA. For example
,8 EA then system will check underdelivery tolerance B1/B2 and if
any one of these is exceeded then system issues warning or error
message " M7028 Shortfall below order price quantity amounting to more
than %"
Please note these tolerance keys are for varaince in order price qty,
not for order qty. For orde qty, system check overdelivery tolerance
and underdelivery tolerance acccording to PO.
BR
Nadia Orlandi

Similar Messages

Post with No Replies Flagged as Solved

Message #2700875, posted three hours ago in the "AirPort" section of the "AirPort Extreme" area, showed no replies until I posted one. However, not only is it flagged as "Solved", it's also marked as "Helpful" answers available: 2 . "Solved" answers available: 1
How can that be? What am I missing?
Apologies if this has been discussed before.

Dave Sawyer wrote:
The only person who could mark the thread as "answered" would be the original poster, and they can do so without any replies being made. Perhaps the poster found an answer elsewhere and marked the thread without bothering to post anything further. Or perhaps they just marked it "answered" by mistake; I've seen that happen as well.
Thanks for the explanation.

:Due On" date field missing while posting with Spl GL indicator for vendor

Hello,
I am facing a problen while posting a n entry with spl GL indicator in fb01, the issue is Due On date field is missing in the screen.
I am posting an spl GL transaction for a vendor thro FB01 and after entering the posting key 39, vendor code and spl Gl indicator in line item and in next screen, the "Due ON" date field is not appearing.
Both vendor recon account and spl GL alternative account use same field status group and checked the field status group , the due date, payments terms are made optional.
The strange thing is, when I use the same vendor with Spl GL indicator "A" , the Due ON field is missing in next screen, and when I use spl indicator " B" , for same vendor, Due On date field is appearing.
Is there any specfic field status setting for DUE ON date field for Spl GL indicator wise? or please help me how to bring due on date field in the screen when posting spl GL transaction?
Please help me on this.
Regards
Surya

Hello Surya,
To make field baseline date for payment (BSEG-ZFBDT) ready for input for
posting the down payment, the following Customizing setting is
necessary:
Financial Accounting -> Accounts Receivable and Accounts Payable ->
Business Transactions -> Outgoing Payments -> Automatic Outgoing Payment
-> Payment Method/Bank Selection -> Configure payment program -> All
company codes -> double-click on corresponding company code -> under
Customer -> 'Sp. G/L transactions to be paid' the letter A should be
entered.
The field "Due On (BSEG-ZFBDT)" cannot be controlled with field status.
It is contolled by field attribute of screen painter (Tcd: SE51). If
you look at element attribute for "Due On" field, a flag for required
entry is activated. In this case, field status has no control over
the field.
As of release 3.1G, field BSEG-ZFBDT is hardcoded in most FI screens
to be mandatory and cannot be influenced by any field status
changes. This situation is only valid when posting with special G/L
indicator (ie PK 29/39).
SAP development team has determined that this is a critical field. The
reason behind this is that this special GL screen and the data entered
here are very important to many other programs. This data affects
liabilities and receivables where due date is necessary almost
everytime. Thus, we changed this field in this screen in order to
prevent problems in many other areas. The reason is explained further in
note 95079.
545944    FAQ, down payment, tax code, baseline date
above Field is controlled through SE51 only.
Tcode : SE51
Program (screen)     SAPMF05A
Screen number        304
Eliment list press display.
special attributes.
BSEG-ZFBDT - Required.
Other options are below.
     The attribute "Input" can have the following values:
     o    Not possible
         The input/output field cannot be supplied with an input - that
         the screen element can only be used for outputs.
     o   Possible
         The input/output field can be supplied with an input at runtime
         the remainder of the transaction, an input is not required.
     o   Recommended (Optional Field)
         The input/output field should be supplied with an input at runt
         The system, of course, does not check immediately whether there
         been an input. During the remainder of the transaction, however
         input is necessary.
         To mark this kind of target field, the input template starts wi
         special character that is represented in the Screen Painter by
         question mark ('?'). The question mark will be suppressed only
         the field is in a table control or a step loop.
         You use the "target field", for example, if inputs cover severa
         screens and only at a later stage are subject to a common check
o   Required Field
    The input/output field must be supplied with an input at runtime.
    The system checks this property immediately, and very definitely
    when the event is processed (PROCESS AFTER INPUT).
    So that such a required field is marked accordingly, its input
    template must begin with a special character that is represented in
    the Screen Painter by a question mark ('?'). The question mark is
    suppressed only if the field is in a table control or a step loop.
I hope above information will resolve your issue.
Kind Regards,
Fernando Evangelista

While F-92 posting with T type 210 not possible (No acquisition posted)

Hi
Asset Retirement Not Possible
We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
Posting with trans.type 210 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
Ajay
yes we are using Group Assets for income tax depreciation
when checked at AS83 no values found under taken over value for the group asset
***. aquistion val - 0
and all other values are zero
Edited by: johnrambo on Oct 4, 2010 12:09 PM
Moderator: Don't repost threads which were locked by moderator

Hi
As I said, go to AS82 and upload the Income tax values for this group asset....
Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
Regards
Ajay M

ABUMN: Posting with trans.type 300 not possible (No acquisition posted)

Hello everyone,
I have seen a few threads on this topic, however I am still not finding a resolution to my issue. I am very new to the FICO configuration scene and probably need a little more hand holding than the others who have asked this question.
I am having and issue using ABUMN while transfering a Capital Investment Project (CIP Asset) under a asset class of AUC, to a standard fixed asset. The CIP has been capitalized. However, when I try to perform the transfer I am receiving the following error:
Posting with trans.type 300 not possible (No acquisition posted)
Message no. AA324
Diagnosis
Transaction type 300 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
Procedure
Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
I have read through SAP NOTE 327088 (for retirements transfer variant 4) and it just doesn't help me with the issue. I know it probably should, but I do not know enough about this process in order for it to make a whole lot of sense.
If anyone can help me with this, it would be greatly appreciated. Again, I am very new, so I will probably have several follow-up questions as well.
Thanks in advance for the help!
Rhonda

Okay...
I have finally figured this out on my own.
When trying to transfer a capital investment project asset with an AuC class (asset under construction), ABUMN is not to be used.
1st. The internal order needs to be fully settled (KO02). Create a settlement rule "FUL" for the designated fixed asset.
2nd. Run "Actual Settlement" run via KO88.
This should transfer everything from the CIP asset to the fixed asset. You can double check this via the S_ALR_87011967 - ... by Plant report. Run this report prior to performing the steps above and the money will show in the CIP asset account, run it again after the above steps. The CIP should be zeroed out and the fixed asset should now carry the amount.

Posting with MM Movement Type 309 material to material: Error in WM

Hello,
i post an MM-Movement type (Bewegungsart) 309 (material to material).
The MM-goods movement works, but then in warehouse mangagement there is a problem:
The creation of the transfer order (Transportauftrag) stops in many cases.
The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
capacity of the bin location is not enough.
The Problem is that I do a posting for example:
001 010101 to 922 Umbuchungzone --> Transfer order Pos 1
922 Umbuchungszone to 001 010101 --> Transfer order Pos 2.
And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
I hope anybody can help me.
Thanks.

Hello Kevin,
I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
Success and thanks beforehand for any credits!
Kind regards,
Bart

My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?

My computer keeps defaulting from a GB format to US format keyboard with a US flag in the top bar. How do I get it to go back to a GB flag and stay with a GB flag?
This only started 2 days ago.
I have seen much on line as this seems to be a common problem, however none of the suggestions posted seem to work.

Thanks Drew,
On clicking the US flag I had previously then unchecked the US box. It has rechecked itself, and I have unchecked it again. The GB English remains checked.
The flag icon has now gone completely from the top bar (just replaced with character and keyboard viewer) -but that's fine. That's different to previous attempts to fix the issue.
Hopefully now I will remain able to type a £ sign on the keyboard rather than get the criss-cross symbol. It may well default back in about an hour (which is what has been happening since this started 2 days ago). If it does I'll come back on here. Many thanks in the mean time for your help.

E Recruitment Job Posting Description under

Hi All please see below my issue
Job Posting Description under These are published with the basic data in the job posting.
My client asking to change the naming conversation In BSP application showing is u201CProjectu201D
They are asking u201CJob Summary u201C
2) Task change to Responsibilities
How to do this issue pleases any one guide me.
Regards
Eshwar

Find out the OTR text assigned to the element you want to update from the Property -> Text
Ex: PAOC_RCF_UI/Task
Go to tcode SOTR_EDIT and find the OTR for PAOC_RCF_UI/Task then go into Edit->Context->Change to make the required changes.

Unable to make posts with account - Receive website unavailable message

I have two accounts. One prior to being an oracle employee (kevinp), and one for after leaving oracle and having my Oracle account mapped to my current account (Kevin Pinsky). Almost everytime i try and make a post with my current account, i get the error:
The website you are attempting to access is currently experiencing network connectivity errors. The problem is being worked on and will be resolved as soon as possible. We apologize for any inconvenience this may cause and thank you for your patience.If i sign in with my old account, i don't seem to have any problems. Can one of the administrators please contact me at the email address listed under either of my account. I am unable to provide assistance to users in the Identity Management forum.
Thanks!
-Kevin

If you are using IE 9 (maybe also IE 8), could you try File > New session (then log in) as a temporary workaround?
It sometimes works for me when there seem to be some single sign-on related issue.

Error while posting with Tax code

Dear All,
I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
Customization for RIL j_1iindcus missing in table
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Regards
Suresh

Dear Suresh,
If you are using versions below 4.7 execute T_Code J1IT, go to India Localization Menu->Global Settings->Company Settings and add an entry for your Company Code and save.
If you are on higher versions use the following path:
SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.
This should solve the issue.
Kindly let me know if it was useful.
Regards,
Mary Sofia

Unable to clear open items through post with Clearing F-04

Hi Experts,
I want to clear one GL code through transaction F- 04 Post with Clearing.
When I clear the open items throgh f-04, (Document types UA , KR , MJ ) it posts the document but again it makes a new line item as a open item with same amount.New line item shows in a list as a open item. ( I tryed F-03 as well)
I am unable to unable to understand the exact functionality of transacion F-04.
Can anyone explain me please ? Please advice if I am missing anthing on this.
Thanks,
Manasi

Hi Manasi,
As the name suggest, F-04 allows you to POST to one account by CLEARING another account.
For example you have a provision account which needs to be adjusted when the actual expense is paid - this how it will be done -
Give the document header details, select "Transfer posting with clearing", enter the posting key (40), give the GL account (expense account as per the example) and go to the next screen.
Give the amount and other details for the line items and then select "choose open item" from the menu. The new screen will ask you to give an account where you will give the provision account (the account from which the open item needs to be cleared).
Press enter and you will get the list of open items for the GL account from where you can proceed like any other clearing.
Hope this clarifies. Do revert in case of any further queries.
Thanks and Regards,
anit

F-04 post with clearing

Hi,
I have made 2 jv transaction posting in fb50 those are reflecting in fbl3n as open items but if i want to clear it through F-04 post with clearing those line items are not appearing pls suggest the solution what might be reason for the same.
waiting for early reply.
Regards
Pramod

Dear Satwik,
ever doc. have 2 ways to clear
1) post with clearing
2)post with out clearing
post with clearning : if u have a invocie and u r passing the payment for that invoice if u chose post with clearning system clear the invoice against that payment.
2)post with out clearning: if u have a invoice and ur passing gthe payment for that invoice if u chose post with out clearning that time system is not clearing the invoice amount
and its showing as 2 line item one is invoice and 2nd is payment line item, after that u can clear both line item against each other
Regards
radha

RANT: Please post with a meaningful subject line

This is an SQL and PL/SQL forum. Almost all posts will be people needing help with a query, or in a PL/SQL procedure, so subject lines like
Stored Procedure
Please share your valuable experience
Need help on the below query
error while running PL/SQL
Query
Help need in this query
PL/SQL
Query - Help
Help
are essentially meaningless (those just in the last few hours).
If you're getting an error, put the error in the subject line.
If your query is slow, first read When your query takes too long ... and if that doesn't help then post with something in the subject line to indicate it's a performance related question.
If it's a "how to" question, use that e.g "how to calculate a rolling average".
Oh, and if your question is how to find the second highest salary in the department, don't bother posting at all.
Just a pet peeve brought to a head by this morning's threads.

Agree and disagree with your comments APC.
Yes, the clueless and unwashed will not even bother reading this posting - just as they will not be bothered by using a totally meaningless subject for their posting.
But, I do not think we should simply 'let it be' (only John/Paul made that work and in a song). The forum is what we, the members, make from it.
I think my continual rants on using "urgent" for a subject header have made a difference and many "got the point". So I do not see Dave's rant as pointless - simply addressed at the wrong audience. He should instead post a small rant to an applicable posting and "spread the message" that way.
As for what we choose to read and not read.. some of us are here because we want to help. And a poster with a meaningless subject has a lessor change of getting his/her posting read by those who want to help.. as it is simply a nameless problem amongst other nameless problems.

Recurring Posting with Tax Code

Hi Experts,
When i am trying to execute a recurring posting with some Tax Code system is giving error "location is missing".
So kindly tell me is it not possible to execute a recurring posting with tax in SAP Business one
Thanks in Advance

Hello,
You should try directily select your reccuring template on JE form, because form also have Location fields in header and row level.
Actuly tax info(Sales tax information) totally depend of what is location you have selected.
then you will find easly your issue.
Thanks
Manvendra Singh Niranjan

Error : Posting with trans.type 200 not possible (No acquisition posted)

Dear All,
Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful.
Posting with trans.type 200 not possible (No acquisition posted)
Message no. AA324

Dear Bird,
Already asset has been posted , but then also it shows the same error.
pls help on this.
regards
Ranjit..

GR posting with Under/Overdelivery Flag

Similar Messages

Maybe you are looking for