Grant access to data cubes

Hi all,
I've got an SCSM 2012 R2 CU5 instance with a healthy Data Warehouse registered. I'm attempting to configure user roles so that I can grant non-administrative users the ability to open data cubes via the SCSM console.
By default, Authenticated Users are added to the Data Warehouse Report Users user role. Unfortunately, this role does not grant visibility of the Data Warehouse workspace, and the Cubes view contained within.
The Data Warehouse also does not allow for the creation of custom user roles (in the way that the SM Administration workspace does), so creation of a cut-down Report Administrator appears to be off the table too.
Is it possible to grant a non-administrative user access to only the Data Warehouse | Cubes view (and also the tasks contained within)?
Cheers,
Adrian

Hi,
You may need to grant permissions from SQL level.
Analysis Services security consists of two major aspects:
1.Administrative permissions to Analysis Services database objects.
2.User permissions for viewing cube data.
You may check below article for more details:
http://www.mssqltips.com/sqlservertip/2776/configuring-permissions-for-sql-server-analysis-services/
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Error accessing selected data source: PAS Cube not available

Hi all,
we were running SSM 7.0 SP04 and updated to SP05. After that accessing to PAS cubes is not possible anymore. We have tried from de SSM administrator (set kpi option), and also from the user interface (scorecard tab).
I have check the model connections (manage models) and test has been succesful.
Any help on this matter will be appreciated.
Thanks in advance.
Regards,
Alfonso

Hello Alfonso,
Have you checked the Set Scorecard Defaults option in the Admin interface? Is the PAS model still assigned to the context?
If the Model Connection test was successful, the only other option would be that you are using PAS security and your user is not associated with any PAS user under the existing Application Server Connections for that Model.
As of SP5 HF3, the application displays clear messages when encountering model connection problems. Perhaps upgrading to this HF or to SP6 it will be easier for you to troubleshoot this situation.
By the way, the SP6 is already released for customer (See SAP Note 1308704).
Hope this helps!
Best regards,
Ricardo Vieira

Shared Services access to Essbase cubes

I'm having several problems with user access to Essbase (non-Planning) cubes. The first problem is that I have granted Read access to the users (using a group) to these Essbase cubes in Shared Services. The security has been refreshed, and if you view the properties of any of the databases to which I've granted access, it shows that the group has read access. However, the users do not see these applications in Smart View Data Source Manager. Does anyone know why they are not showing up in Smart View? Using my own id, I added all of these applications to the pre-defined view, and if the users use the pre-defined view, they can see the databases, but if they try to connect it says they don't have access.
The second issue is that only the Essbase cubes that existed at the time that we upgraded to version 11 are showing up in Shared Services. We have since created several more cubes, but I am unable to get them to show up in Shared Services. What am I missing? Shared Services Help is not particularly helpful in either of these instances.
Thanks,
Sabrina
P.S. Just venting, but I hate Shared Services.

John,
I have two problems with your suggestion. The first is that when I go to the "Assign Access Control" page, I can't select users/groups, but can only select users. I could do each user separately, I suppose, but doesn't that sort of defeat the purpose of having groups? I'm on version 11 - do you know of any reason why I can't choose groups at this point?
My second problem is that I can't set them as essbase/planning users, if by that you mean there should be a choice that is both. I can do either one, but not both together. They are currently set to Planning. Will it mess anything up with their Planning access if I set them to Essbase?
Thanks,
Sabrina

Restricting access to a cube while it is being maintained

Hi,
We are trying to restrict access via discoverer/excel add in to a CUBE while cube is being maintained. We were able to achieve this by revoking privileges to certain roles before the start of the cube build.
I would like to know if there is any better way or built in functionality(out of box) that restricts access to a cube a while it is refreshing? Any help is appreciated.

Ragnar is correct, the best way to do this is to attach the AW in exclusive mode. You can either do this manually yourself before starting your load job, or automatically by scheduling the job and using mutiple processes to load and solve the cube.
The problem is removing users currently viewing data via Excel/Disco when the job starts. If you can ensure there will be no users accessing the AW when the job starts, then the exclusive attach mode will prevent any users from attaching the AW during the processing. If you cannot guarantee this, then there is a problem because the job will fail when it tries to attach the AW in exclusive mode. Obviously you could put this in a loop and wait until a user exits the front end application and releases the AW. Alternatively, you could write a SQL script to disconnect/kill all sessions accessing the AW - not very nice for the users though if they are building a report because they will lose all their unsaved changes.
When the AW is attached in exclusive mode, bad news is that Discoverer/Excel will probably generate a nasty Java error message when a user tries to connect using Discoverer/Excel.
Therefore, overall not an ideal situation. But I cannot think of a really good way to manage this at the moment. Sorry I can't be more helpful.
Keith Laker
Oracle EMEA Consulting
OLAP Blog: http://oracleOLAP.blogspot.com/
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
DM Blog: http://oracledmt.blogspot.com/
OWB Blog : http://blogs.oracle.com/warehousebuilder/
OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

How to give planners read only access to Planning cube for ad-hoc analysis?

Hi Everyone,
I am trying to issue smartview reports to the planners. Most of the reports are coming off Essbase (reporting) application. However, we have to generate one report from planning server because of the text fields. Currently, on planning server, planners have access only to the forms. They dont have access to the planning cube. But to make them able to refresh this report, we need to give them access to the planning cube.
But we dont want them to do ad-hoc data write on planning cube. So my question goes like this - Is there a way for planners to have write access on the web forms but only read access to the cube through samrtview ??

The access permissions will match between planning and smart view if a planning connection is used.
Cheers
John
http://john-goodwin.blogspot.com/

Update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow.

update to IOS 6 has been a nightmare. Facebook would allow me to save pictures unless I granted access to my foto album. Does this mean my pictures are going be planted all over the web? The safari keeps crashing and loading is slow. Most infuriating is that YouTube was deleted from my entertainment apps and I now have to pay for it if I want it back!! This is a bloody disgrace.

Back up all data.
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Grant access to all the views created in user schema to another schema

How to grant access for all the views created in own HAGGIS schema to comqdhb schema on the HAGGIS database.
Oracle Grant Privileges
===============
Object privileges assign the right to perform a particular operation on a specific object
I read that we can use select 'grant select on' ||view_name||'HAGGIS' user_views where owner='COMQDHB'
Is this right
Oracle System Privileges
===============
System privileges should be used in only cases where security isnt important,because a single grant statement could remove all security from the table
Role based security
============
Role security allows you to gather related grants into a collection-since the role is a predefined collection of privileges that are grouped together.privileges are easier to assign to users.
[http://www.dba-oracle.com/art_builder_grant_sec.htm]
can we grant select update to all the views at a time to the other schema.
Are there any other ways to secure the data other than creating users and assigning roles.
Thank you
Edited by: Trooper on Dec 23, 2008 9:24 AM

I think what was suggested was that you use SQL to generate the grants on each and every view, that is, you use SQL to generate SQL where the SQL being generated is "grant select on view_name to role'"
If you users to connect to Oracle you have to create usernames for them though if the users only connect via an application the application might run just as one user and access to the application is controled via application security. The control on the application can be via Directory Services such as OID or MS Active Directory. User access to Oracle can also be controlled via OID.
To connect to Oracle you can use OS authenication (not recommended), usernames with passwords, or via Advanced Security Option which supports single sign-on products like Kebros or Oracle Internet Directory etc....
Example using SQL to generate SQL
How do I find out which users have the rights, or privileges, to access a given object ?
http://www.jlcomp.demon.co.uk/faq/privileges.html
HTH -- Mark D Powell --

Cannot access external data , Failed to get the document information.

Hi All,
In my dashboard there are live office connections which has optional prompts defined in SAP BI. I have bound the cells to these prompts in live office object properties.
There are no errors while refreshing the LO connections from excel sheet.
But when i run that dashboard and give BLANK value for that prompt then it throws the error :
Cannot access external data , Failed to get the document information. (LO 26315).
Reply highly appreciated.
Thanks & Regards,
DJ

Hi Hardik,
I am building a similar solution as yours connecting webi reports to Bex queries and reading the webi data through live office into the dashboards. I am using almost similar versions as yours - BW 7.1 SP5, BO 4.1 SP4, Dashboards and Live Office SP4 versions. I am facing issues setting up the live office connections itself. I create the Live office connections within an excel and when I try to import this excel spreadsheet into my dashboard designer, it runs forever and crashes.
Could you please list out the steps you performed to get the Dashboard to preview live office data? Do you have OLAP connections for BW cubes and created WebI reports using these connections or You created a Universe on top of the Bex Queries?
It would be great if you could share the steps performed.
With respect to your issue, check if the report engine service is running. Do you have any error message details apart from this error?
Thanks.
Regards,
Rohini.

Enterprise Role grants in jazn-data fail for AD Provider User Accounts?

Hello All,
I have enterprise roles defined within my jazn-data.xml for my 11.1.1.4 web application. We just recently switched user accounts over to an active directory provider for authentication. So, I have user accounts associated with the active directory provider that are assigned to my enterprise roles. This is working fine because all of my EL expressions of the form #{securityContext.userInRole['EnterpriseRoleName']} are working great.
However, all of the grants in jazn-data.xml for pages that should only be viewable by users with this role are now not working. Users with this role see a "Internal Server 500" error with the message "oracle.adf.controller.security.AuthorizationException: ADFC-0619: Authorization check failed", rather than the related pages. This all used to work when the user accounts were not coming from the active directory provider.
As a work around, I've had to grant test-all view access to all pages, but hide controls and portions of pages that non-authorized users should see using EL like what I printed above.
This can't be right. Why are AD user accounts treated differently by WebLogic Server, when the security context indicates that the user has the proper role?
Thanks

Haha... nice one. This is a low-key production app that is internal to this company. I can't have users with AD accounts, who used to have WLS internal accounts when the jazn grants worked, just stop using the application until some solution comes about. It may take days. I don't understand why you would leave such an unhelpful comment and then leave the discussion. Is this a precedence that you want set within your forum? Please help me to understand why this is a bad workaround. I'm just at the beginning of trying to figure out the root cause of this issue. A search didn't reveal any obvious answers, so I thought I'd reach out to my knowledgeable ADF friends on the forum to see if this was something that could easily be fixed.
Back to your comment -- why is this a mistake? I have always used the rendered attribute value to hide navigation points to pages that are supposed to be accessible to users with the enterprise role (e.g. rendered="#{securityContext.userInRole['EnterpriseRoleName']}"). This still works fine in the context of this problem, because the security context is working properly -- it's picking up user membership to enterprise roles. It's the jazn grants that are not working for the AD provider related users.
In this context, if some really smart user guesses the URL of a page I don't want them on because they don't have the role, then why can't I simply set rendered="#{securityContext.userInRole['EnterpriseRoleName']}" on the PGL that presents the body of the page? The content of the page isn't rendered. That's the point of the "rendered" attribute, right? Better yet, I could have a nice message that says that aren't authorized to view the page, rather than put a Java stack trace in their face. Why, then, as a temporary workaround, is this such a bad idea?
Thank you "sameera.sac" for the links. I'd seen the first one before posting and it wasn't pertinent. But I'll certainly research the others you provided.
Thanks

Fox code: unable to access infocube data

Hi Friends,
Multi planning area consists of 2 basic areas. One infocube based on key figure model and other infocube based on account model.
Now unable to access infocube(keyfigure model) data in multi area. Here my taget cube is based on account model.
Operand display format is
{Key Figure Name,Calendar Year/Month,Key Figure Type,Plng Area}.
I haven't used any fields for condition. Below is excerpt of code.
calmon is global varible with range 04.2006 to 03.2007
DATA BPER TYPE 0CALMONTH. 'begin period
DATA SPER TYPE 0CALMONTH. 'starting period
DATA DPER TYPE 0CALMONTH. 'previous period
DATA COUNTER TYPE I.
SPER = VARI('CALMON',1).
DO.
BPER = TMVL(SPER,COUNTER).
DPER = TMVL(BPER,-1).
IF COUNTER > 0.
Assign previous period closing stock to opening stock
{ZQTY,BPER,000074,CASHFLOW} = {ZQTY,DPER,000079,CASHFLOW}.
ENDIF.
COUNTER = COUNTER + 1.
Production from crushing(28.5%)
{ZQTY,BPER,000076,CASHFLOW} =
{ZCRUSHING,BPER,#,SPROPLAN} * (28.5 / 100).
Raw Closing stock
{ZQTY,BPER,000085,CASHFLOW} =
{ZQTY,BPER,000084,CASHFLOW} -
{ZRAWSUGAR,BPER,#,SPROPLAN}.
IF COUNTER = 12.
EXIT.
ENDIF.
ENDDO.
Could any one of you help me out in this regard..appreciate ur help with points..
thanks,
RP
I also tried by incorporating versions too..
{Key Figure Name,Calendar Year/Month,Key Figure Type,Version,Plng Area}
Plan version
DATA NVER TYPE 0VERSION.
NVER = VARV(PVER). " returns globle variable value
{ZQTY,BPER,000074,NVER,CASHFLOW} =
{ZQTY,DPER,000079,NVER,CASHFLOW}.
{ZQTY,BPER,000076,NVER,CASHFLOW} =
{ZCRUSHING,BPER,#,FPV,SPROPLAN} * (28.5 / 100).
FPV is final version of SPROPLAN(planning application)
{ZQTY,BPER,000085,NVER,CASHFLOW} =
{ZQTY,BPER,000084,NVER,CASHFLOW} -
{ZRAWSUGAR,BPER,#,FPV,SPROPLAN}.
thanks, ...RP
I tried by inserting two fields Fiscal yr & value type in "fields for condition" , still i'm not getting..what might be the reason?
Is there any other way to achieve this?
thanks...RP
I'm already using standard area SPROPLAN in another multi-area, in that multi-area consists of 2 cubes both are based on key figure model only and correctly able to access the data for that application requirement, but here i'm not able to access SPROPLAN cube's data. I checked with different combinations. Any suggestions....
thanks,..RP
Keyfigure ZCRUSHING of SPROPLAN plannning area is already accessed in just above mentioned mulit-area, is because of this, am i getting the problem? Is there any refresing setting i have to mention?...thanks
Edited by: Kumar RP on Mar 27, 2008 1:51 PM
Edited by: Kumar RP on Mar 28, 2008 7:42 AM
Edited by: Kumar RP on Apr 1, 2008 6:53 AM
Edited by: Kumar RP on Apr 2, 2008 11:20 AM

Myself corrected code by using operand format as
{Key Figure Name,Key Figure Type,Plng Area}.
regards,
RP

Grant access to application

Hi All,
I am working with Olite 10gR2;
I created and deployed my application with data subsetting parameter using wtgpack; I published the application successfully.
I then created a group and granted access to my application to the group.
I created user's and added the users to the group. This worked fine last week in dev and I was able to add all 90 users to the group.
Problem: I was able to add two users now; when I tried adding a third user I got this error message -
"Error in executing " Save application ":oracle.lite.web.resource.ResourceException: CONS-10049: Consolidator Exception: Closed Statement "
When I tried granting access to my application, to individual users as an alternative to adding users to group with access to the application, I get this error;
Error Message: "Virtual Path Is Null"
I will appreciate any solution on this error message. I need to be able to add more users to the group.
Thanks for your time.

I created a servlet filter for faces-servlet
Don't map filter to servlet.
Use URL mapping, something like:
<filter-mapping>
<filter-name>YourFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
Also have a question about ReadOnlySQLAuthenticator. Mentioning sensitive queries like query to get the password of the user from the table etc, is it secure? will it lead to any type of security threat like if a user get access to console and get the query etc?
Your sql queries shouldn't be 'sensitive'
Best practice is to store secure hash(for example: SHA1 or better) instead of encrypted password.
(ReadOnly)SQLAuthenticator can use encrypted passwords or secure hash(check Provider Specific Configuration). To make this to work, you will need to create secure hash and append {ALGORITHM_TYPE} to begin of hash.
For example: {SHA1}asdsijifndfbj=
And of course, you need to protect your WLS admin console(and enterprise manager, if deployed).
Use strong admin password and restrict access to console url (if possible).
Dario

Grant access to terminated employee's mailbox

How can I easily grant access to a terminated employee's mailbox including deleted items? If I have the terminated employee's mailbox on litigation hold the deleted items are in the recovery folder, but can the recovery folder only be viewed through
e-discovery process?
Thanks!

Hi Viper,
Thank you for your question.
We could run the following command to grant full access permission on terminated user:
Add-MailboxPermission –Identity <terminated user> -User <your name> -AccessRights FullAccess –InheritanceType all
If I have the terminated employee's mailbox on litigation hold the deleted items are in the recovery folder, but can the recovery folder only be viewed through e-discovery process?
A: Yes, we could be granted only viewer to the specific user, we could refer to the following link:
https://technet.microsoft.com/en-us/library/dd298021(v=exchg.150).aspx
Authorized users can perform an In-Place eDiscovery search by selecting the mailboxes, and then specifying search
criteria such as keywords, start and end dates, sender and recipient addresses, and message types. After the search is complete, authorized users can then select one of the following actions:
Estimate search results   This option returns an estimate
of the total size and number of items that will be returned by the search based on the criteria you specified.
Preview search results   This option provides a preview
of the results. Messages returned from each mailbox searched are displayed.
Copy search results   This option lets you copy messages
to a discovery mailbox.
Export search results   After search results are copied
to a discovery mailbox, you can export them to a PST file.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

How Can a User Access Georaster Data Owned by Another User

We are unable to view raster data owned by one user with another user.
Have a user that owns a Georaster table, and a spatial index table.
We create another user, and grant him "SELECT", or "ALL" to these two tables.
We still run into problems where the second user can not see some other table from the first user, so we run until we get an error message about some table, grant access to the table, and the next table, until we finally receive an error when trying to grant access to some table.
"grant select on LGGI_DSC_COL_DBL_DATA_81 to schen;"
ERROR at line 1:
ORA-01720: grant option does not exist for 'LEICASYS.EDSC_VARRAY_DBL'
Here are the users, and tables specific to our example
User A: ORTHO (supplier)
User B: SCHEN (consumer)
We are trying to allow SCHEN view data from the raster table ORTHO.DEMOTB
We grant SCHEN "ALL" on ORTHO.DEMOTB, ORTHO.LGGI_RDT_ORTHO_C1, ORTHO.LGGI_DSC_COL_MAP, then we fail granting access to ORTHO.LGGI_DSC_COL_DBL_DATA_81
What are we doing wrong, it seems like this is a common work flow, we must be missing something obvious.

Derrick,
I suppose mashing up both Dan's answer and mine in this case is your best (and only option). The error, ORA-01720: grant option does not exist for 'LEICASYS.EDSC_VARRAY_DBL', is pointing to the fact that you not only have a GeoRaster table with GeoRaster and other native Oracle types, but also some extra user defined types (UDT) which your group has built to store nested arrays of information. Because the UDT in the table is its own object (just like a table is its own object) you must ALSO grant privileges to the UDT in order to use them in a cross-schema setup.
In other words, this is not a simple "how do I use GeoRaster across schemas" question; this is a "how do I use GeoRaster, plus other UDTs that I have defined myself, across schemas" question.
In this case you will have to login as a DBA or the user who created the EDSC_VARRAY_DBL type (LEICASYS), and specifically grant privileges on this type. Does that make sense? I know it's more work than what I alluded to before, but this is a different problem outside of the scope of GeoRaster.
Finally, I work for Leica Geosystems, and noticed that your schema is called LEICASYS. If you would like to contact me directly you may do so at Justin dot Lokitz at lggi dot com.
-Justin

Unable to access the data and table fields from handheld

Hi,
I've created a Testing.sdf file on the local pc using SQL Server Management Studio, creating table, fields and insert some data. in local pc i can access the the data as normal. the problem is after i moved the file to handheld device i
cannot access the data within the table, it shown error 'Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)' . I tried to google it, but still got no solution.
Thanks,

'Name Space
Imports System.Data.SqlServerCe
'String Connection
'Data Source = D:\SKUDWN3 .sdf'
Public Sub CreateDB(ByVal StrConn As String)
        'Declaration
        Dim cn As SqlCeConnection = Nothing
        Dim cm As SqlCeCommand = Nothing
        Dim SQLEngine As SqlCeEngine = Nothing
        Dim rs As SqlCeResultSet = Nothing
        Dim rec As SqlServerCe.SqlCeUpdatableRecord = Nothing
        'Tables -
        Const TB_SKUDWN3 As String = "SKUDWN3"
        'Fields TB_SKUDWN3
        Const FL_SKUDWN3_UPC As String = "UPC"
        Const FL_SKUDWN3_SKU As String = "SKU"
        Const FL_SKUDWN3_LD As String = "LD"
        Const FL_SKUDWN3_SD As String = "SD"
        Const FL_SKUDWN3_AN As String = "AN"
        Const FL_SKUDWN3_Price As String = "Price"
        Const FL_SKUDWN3_GST_FLAG As String = "GSTFLAG"
        'Create Database
        SQLEngine = New SqlCeEngine(StrConn)
        SQLEngine.CreateDatabase()
        SQLEngine.Dispose()
        'Open Connection
        If IsNothing(cn) Then cn = New SqlCeConnection(StrConn)
        If cn.State = Data.ConnectionState.Closed Then cn.Open()
        cm = cn.CreateCommand
        'Create Table, Fields
        cm.CommandText = "CREATE TABLE " & TB_SKUDWN3 & " (" & FL_SKUDWN3_UPC & " NVARCHAR (13)," & _
            " " & FL_SKUDWN3_SKU & " NVARCHAR (9), " & FL_SKUDWN3_LD & " NVARCHAR(30)," & _
            " " & FL_SKUDWN3_SD & " NVARCHAR (18), " & FL_SKUDWN3_AN & " NVARCHAR(15), " & _
            " " & FL_SKUDWN3_Price & " NVARCHAR (10), " & FL_SKUDWN3_GST_FLAG & " BIT)"
        cm.ExecuteNonQuery()
        'Close Connection
        cm = Nothing
        If Not IsNothing(cn) Then
            If cn.State = ConnectionState.Open Then cn.Close()
            cn.Close()
            cn.Dispose()
        End If
    End Sub
'The DB was successfully created, but after moving to Handheld the fields of table can't be accessed

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

Grant access to data cubes

Similar Messages

Maybe you are looking for