Grideview Bind Event - Place data in column depending on result

Hi,
I wonder if anyone can help?
I need to bind a Gridview to an SQL query (easily done) but when I bind the data, I need the data to appear in a specific column depending on the date field.
So essentially the Gridview will hold a financial report, and the value can be a past value received or a future value to be processed, this value is held in the same column in the SQL database and there is nothing to determine whether it is past or future
value other than the date the report was generated on (I didn't design the database)
So in case that doesn't make sense, when I run a report in July, I need all fields pre-July to appear in Column A but all fields for July to appear in Column B.
Thanks in advance for any help
G

Hello GRJ28,
GridView can stands for the following:
1.ASP.NET GridView(System.Web.UI.WebControls.WebControl GridView)
https://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.gridview%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
2. WPF GridView(System.Windows.Controls.GridView GridView)
https://msdn.microsoft.com/en-us/library/system.windows.controls.gridview(v=vs.110).aspx
Can you specific your project?
If it is ASP.NET project, you have to post on ASP.NET forum as "CoolDadTx " mentioned.
If it is WPF project, here is
WPF forum and please consider whether you need a button or something to refresh the data. The two-way binding in WPF seems will not trigger when in your scenario. What's more, since you want your GridView change when data changed, you may need to change
your property of GridView with that button or any event.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Getting past days data based on DATE data type column

I am trying to extract last 2 days data using date data type column with below query,
select * from tbl
where col < col -2;
this is not showing me any data. please help where i am making mistake. guide please. thx

Hi,
When you say "last 2 days" do you mean the 48 hours right before run-time?
If so, you want to compare col to SYSDATE:
select *
from    tbl
where   col > SYSDATE - 2
and     col <= SYSDATE
;If you mean the "last 2 days" before some other event, then replace SYSDATE with that date in both places above.
If you were trying
where   col > col - 2then you should have been getting all rows that have a non-NULL col. If you were getting no results, then something is very wrong.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
If the results depend on when you run the query, then give a couple of different examples, with the run-time. for example "If I run this at 03:00:00 on July 1, 2012, then I should get ... but if I run ir at 15:00:00 on July 1, 2012, then the results should be ...".
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using.
See the forum FAQ {message:id=9360002}

Shading certain columns depending on start day of week.

Good Afternoon,
I have reason to edit the calendar wizard to make it completely automated. And before anyone says that this isn't used anymore, we've received 2 separate calendar files over the last made from our Finance departments, each making them with Word calendar
wizard highlighting year end dates. So believe me, the calendar wizard is still very much in use!
Last September, I finally figured out how to automate the first day of the week, though. I have 2 templates now, one for Monday as first day and one for Sunday being the first day of the week.
The only thing missing is to automate the shading so that the columns for Saturday and Sunday are shaded with light grey, and since it's automation we're talking about, only those cells in the columns with a number in them.
I know it's do-able, I'm just not a vb expert, only being able to handle editing simple macros.
But I understand that since I had some help with the macros and they might have changed from the original to some degree, that I should post the code. Is this correct? I hope that it is.
' WORD 97 WIZARD
' Calendar Wizard Specific Code
Option Explicit
' CONSTANT DECLARATIONS
'=============================== LOCALIZATION BLOCK ===============================
' Localization Note: iWeekStartDay is the starting day of the week (Sun = 0, Mon = 1, ...Sat = 6)
Public Const iWeekStartDay As Integer = 1
' Banter strings
Public Const strWarnYearReq As String = "Both starting and ending years are required."
Public Const strWarnMinExceeded As String = "The year can not be before 1900."
Public Const strWarnMaxExceeded As String = "The year can not be after 4095."
Public Const strWarnRangeExceeded As String = "The calendar is limited to 120 months (10 years)."
Public Const strAppCaptionPart1 As String = "Calendar: "
Public Const strAppCaptionPart1b As String = ""
Public Const strAppCaptionPart2 As String = ", "
Public Const strAppCaptionPart3 As String = " to "
Public Const strAppCaptionPart4 As String = ", "
' Status messages
Public Const strStatusIntro As String = "Creating Calendar..."
Public Const strStatusPart1 As String = "Creating "
Public Const strStatusPart2 As String = ", "
Public Const strStatusPart3 As String = "..."
' Assistant
Public Const strCallBackHeading As String = "Do more with the calendar?"
'Margins for A4 size (if wizard changes pagesize to A4)
Public Const sA4_SHORT_MARGIN As Single = 28.8
Public Const sA4_LONG_MARGIN As Single = 57.6
'Margins for Letter size (if wizard changes pagesize to Letter) in pts
Public Const sLETTER_SHORT_MARGIN As Single = 36
Public Const sLETTER_LONG_MARGIN As Single = 36
'========== END LOCALIZATION BLOCK - DO NOT MAKE CHANGES BELOW THIS LINE ==========
Public Const iYearMin As Integer = 1900
Public Const iYearMax As Integer = 4095
' Bookmark Names - DO NOT LOCALIZE
' Note: No spaces allowed in bookmark names
Public Const strBkMkMonth As String = "Month"
Public Const strBkMkDays As String = "Days"
Public Const strBkMkDayNames As String = "DayNames"
Public Const strBkMkYear As String = "Year"
' Calendar Style Names and Constants
Public Const wzBOXES As Integer = 0
Public Const wzBANNER As Integer = 1
Public Const wzJAZZY As Integer = 2
' Form Control
Public Const wzPAGE_START As Integer = 0
Public Const wzPAGE_STYLE As Integer = 1
Public Const wzPAGE_DIRECTION As Integer = 2
Public Const wzPAGE_MONTHS As Integer = 3
Public Const wzPAGE_FINISH As Integer = 4
'orientation
Public Const iORTN_PORTRAIT As Integer = 0
Public Const iORTN_LANDSCAPE As Integer = 1
' Assistant
Public Const iMAX_PANEL As Integer = 4 ' Number of last panel in MultiPage (First=0)
Public Const iCALL_BACK_COUNT As Integer = 3 ' Number of items in CallBackBalloon (First=1)
'postwizard balloon document variable
Public Const strPOST_WIZ_BLN As String = "Calendar post wizard balloon"
' VARIABLE DECLARATIONS
' General
Public rgstrMonthName(11) As String
Public rgstrDayName(6) As String
Public rgiDaysInMonth(11) As String
Public fDateError As Boolean
Public fCheckValidity As Boolean 'if set then the dates are checked for validity
'variables used in doc. creation
Public str1_TO_28 As String
Public rgsDaysHeight(2, 1, 1) As Single
Public rgsMonthNamesHeight(2, 1, 1) As Single
Public rgstrDaysStyle(2) As String
Public rgstrMonthNamesStyle(2) As String
Public strSTY_BANNER_HDG3 As String
' Assistant
Public rgstrAssistantMsg(iMAX_PANEL + 1) As String
Public rgstrCallBackMsg(iCALL_BACK_COUNT) As String
Public rgstrCallBackTip(iCALL_BACK_COUNT) As String
' Page 1
Public iCalendarStyle As Integer
Public iSavedStyle As Integer
' Page 2
' Page 3
' Page 4
Public Sub InitWizardName(fDummy As Boolean)
strWizName = "Calendar Wizard"
strWizLongName = strWizName
strWizShortName = "Calendar"
End Sub
Public Sub InitWizardStrings(fDummy As Boolean)
Dim i As Integer
On Error GoTo FatalError
'=============================== LOCALIZATION BLOCK ===============================
' Note: this list is indexed 0 - iMAX_PANEL
rgstrAssistantMsg(0) = "The Calendar Wizard helps you create a monthly calendar that you can customize with pictures and events. If you want to track and be reminded of events, you should probably use Microsoft Outlook, Microsoft Schedule+, or Microsoft Exchange."
rgstrAssistantMsg(1) = "Select the look you want for your calendar. The Jazzy style uses the Algerian font. If it is not installed on your system, copy alger.ttf from the Valupack folder on the Microsoft Office CD to your hard drive."
rgstrAssistantMsg(2) = "If you leave room for a picture, Word will insert a placeholder picture that you can replace with any picture you want."
rgstrAssistantMsg(3) = "Your calendar can start on any month, and you can make your calendar shorter than or longer than 12 months. Each month will appear on a different page."
rgstrAssistantMsg(4) = "To change any settings, click Back."
' Note: change constant iCALL_BACK_COUNT if number of items in list changes
rgstrCallBackMsg(0) = "Add, remove, or replace a picture"
rgstrCallBackMsg(1) = "Enter information into the calendar"
rgstrCallBackMsg(2) = "Get Help on Something Else..."
rgstrCallBackTip(0) = "To remove a picture, click on it and then press Delete. To add a picture, click where you want to insert the picture, point to Picture on the Insert menu, and then click From File."
rgstrCallBackTip(1) = "To enter information, click where you want to insert the text and start typing. To move between different dates in the calendar, press Tab to move forward or press Shift+Tab to move to the previous date."
'Load Month Name array
rgstrMonthName(0) = "January"
rgstrMonthName(1) = "February"
rgstrMonthName(2) = "March"
rgstrMonthName(3) = "April"
rgstrMonthName(4) = "May"
rgstrMonthName(5) = "June"
rgstrMonthName(6) = "July"
rgstrMonthName(7) = "August"
rgstrMonthName(8) = "September"
rgstrMonthName(9) = "October"
rgstrMonthName(10) = "November"
rgstrMonthName(11) = "December"
'Load Day Name array LOCALIZATION NOTE: DO NOT CHANGE THE ORDER IN WHICH THESE APPEAR!
' TO CHANGE THE WEEK START DAY, CHANGE THE CONSTANT iWeekStartDay
rgstrDayName(0) = "Sun"
rgstrDayName(1) = "Mon"
rgstrDayName(2) = "Tue"
rgstrDayName(3) = "Wed"
rgstrDayName(4) = "Thu"
rgstrDayName(5) = "Fri"
rgstrDayName(6) = "Sat"
'Load Days In Month array
rgiDaysInMonth(0) = 31
rgiDaysInMonth(1) = 28 'Will not be used - must be calculated for leap year accuracy
rgiDaysInMonth(2) = 31
rgiDaysInMonth(3) = 30
rgiDaysInMonth(4) = 31
rgiDaysInMonth(5) = 30
rgiDaysInMonth(6) = 31
rgiDaysInMonth(7) = 31
rgiDaysInMonth(8) = 30
rgiDaysInMonth(9) = 31
rgiDaysInMonth(10) = 30
rgiDaysInMonth(11) = 31
rgstrDaysStyle(wzBOXES) = "Boxes"
rgstrDaysStyle(wzBANNER) = "Banner"
rgstrDaysStyle(wzJAZZY) = "Jazzy"
rgstrMonthNamesStyle(wzBOXES) = "Boxes Heading2"
rgstrMonthNamesStyle(wzBANNER) = "Banner Heading2"
'we dont set the style for month names in Jazzy style
'the Banner style landscape calendar with picture uses Banner Heading3 style for month names
strSTY_BANNER_HDG3 = "Banner Heading3"
rgsMonthNamesHeight(wzBOXES, iORTN_PORTRAIT, 0) = 55
rgsMonthNamesHeight(wzBOXES, iORTN_PORTRAIT, 1) = 55
rgsMonthNamesHeight(wzBOXES, iORTN_LANDSCAPE, 0) = 36
rgsMonthNamesHeight(wzBOXES, iORTN_LANDSCAPE, 1) = 36
rgsDaysHeight(wzBOXES, iORTN_PORTRAIT, 0) = 56
rgsDaysHeight(wzBOXES, iORTN_PORTRAIT, 1) = 102
rgsDaysHeight(wzBOXES, iORTN_LANDSCAPE, 0) = 72
rgsDaysHeight(wzBOXES, iORTN_LANDSCAPE, 1) = 71
rgsMonthNamesHeight(wzBANNER, iORTN_PORTRAIT, 0) = 60
rgsMonthNamesHeight(wzBANNER, iORTN_PORTRAIT, 1) = 60
rgsMonthNamesHeight(wzBANNER, iORTN_LANDSCAPE, 0) = 55
rgsMonthNamesHeight(wzBANNER, iORTN_LANDSCAPE, 1) = 51
rgsDaysHeight(wzBANNER, iORTN_PORTRAIT, 0) = 64
rgsDaysHeight(wzBANNER, iORTN_PORTRAIT, 1) = 110
rgsDaysHeight(wzBANNER, iORTN_LANDSCAPE, 0) = 81
rgsDaysHeight(wzBANNER, iORTN_LANDSCAPE, 1) = 81
rgsMonthNamesHeight(wzJAZZY, iORTN_PORTRAIT, 0) = 73
rgsMonthNamesHeight(wzJAZZY, iORTN_PORTRAIT, 1) = 73
rgsMonthNamesHeight(wzJAZZY, iORTN_LANDSCAPE, 0) = 62
rgsMonthNamesHeight(wzJAZZY, iORTN_LANDSCAPE, 1) = 59
rgsDaysHeight(wzJAZZY, iORTN_PORTRAIT, 0) = 40.5
rgsDaysHeight(wzJAZZY, iORTN_PORTRAIT, 1) = 81.8
rgsDaysHeight(wzJAZZY, iORTN_LANDSCAPE, 0) = 58.2
rgsDaysHeight(wzJAZZY, iORTN_LANDSCAPE, 1) = 57.5
str1_TO_28 = ""
For i = 1 To 28
str1_TO_28 = str1_TO_28 & CStr(i) & vbTab
Next i
'strip off last tab
str1_TO_28 = Left$(str1_TO_28, Len(str1_TO_28) - 1)
' Location in registry DO NOT LOCALIZE
strRegSettingsKey = strREG_SETTINGS_BASE_KEY & "Calendar Wizard"
Exit Sub
FatalError:
ReportError Err
End Sub ' InitWizardStrings
Public Sub InitWizard(fDummy As Boolean)
' Global Vars
fWizardCallBack = False
fDateError = False
iCurrentPanel = 0
' Initialize strings
InitWizardStrings (True)
' Create a new instance of the form
Set formWizard = New formWizDlg
If formWizard Is Nothing Then GoTo FatalError
formWizard.lblWizName1.Caption = " " & strWizLongName & " "
Exit Sub
FatalError:
DisplayErrorMsg strERR_INIT_FORM
ReportError Err
End Sub
' fDummy prevents sub from appearing in Word Tools/Macro list
Public Sub SaveDialogValues(fDummy As Boolean)
On Error GoTo FatalError
' Display status
Application.ScreenUpdating = False
System.Cursor = wdCursorWait
StatusBar = strSAVE_SETTINGS
' Assistant
System.PrivateProfileString("", strREG_SETTINGS_BASE_KEY, strREG_ASSISTANT_TIME_STAMP) = Format$(Now, "General Date")
StoreValPref strREG_ASSISTANT_HELP, iLocalState
' Page 1
StoreValPref "iCalendarStyle", iCalendarStyle
' Page 2
StoreValPref "optPortrait", formWizard.optPortrait.Value
StoreValPref "optPictureYes", formWizard.optPictureYes.Value
' Page 3
StatusBar = ""
System.Cursor = wdCursorNormal
fSettingsSaved = True
Application.ScreenUpdating = True
Exit Sub
FatalError:
ReportError Err
End Sub
Public Sub RestoreDialogValues(fDummy As Boolean)
Dim i As Integer
On Error GoTo FatalError
' Display status
Application.ScreenUpdating = False
StatusBar = strRST_SETTINGS
System.Cursor = wdCursorWait
' Page 1
iCalendarStyle = IRestorePref("iCalendarStyle", 0)
Select Case iCalendarStyle
Case wzBOXES
formWizard.optBoxes.Value = True
formWizard.shpShadowBoxes.Visible = True
Case wzBANNER
formWizard.optBanner.Value = True
formWizard.shpShadowBanner.Visible = True
Case wzJAZZY
formWizard.optJazzy.Value = True
formWizard.shpShadowJazzy.Visible = True
Case Else
iCalendarStyle = wzBOXES
formWizard.optBoxes.Value = True
formWizard.shpShadowBoxes.Visible = True
End Select
' Page 2
If FRestorePref("optPortrait", False) Then
formWizard.optPortrait.Value = True
formWizard.shpPortraitShadow.Visible = True
formWizard.shpLandscapeShadow.Visible = False
Else
formWizard.optLandscape.Value = True
formWizard.shpPortraitShadow.Visible = False
formWizard.shpLandscapeShadow.Visible = True
End If
formWizard.optPictureYes.Value = FRestorePref("optPictureYes", False)
' Page 3
formWizard.cboMonthStart.ListIndex = Month(Date) - 1
formWizard.cboMonthEnd.ListIndex = Month(Date) - 1
formWizard.txtYearStart = Year(Date)
formWizard.txtYearEnd = Year(Date)
fCheckValidity = False
StatusBar = ""
System.Cursor = wdCursorNormal
fSettingsRestored = True
Application.ScreenUpdating = True
Exit Sub
FatalError:
ReportError Err
Exit Sub
End Sub ' RestoreDialogValues
' fDummy prevents sub from appearing in Word Tools/Macro list
Public Sub CreateNewDoc(fDummy As Boolean)
Dim iMonthCurr As Integer
Dim iYearCurr As Integer
Dim lYearMonthCurr As Long
Dim lYearMonthEnd As Long
Dim iDaysCnt As Integer
Dim iDaysInMonth As Integer
Dim iCnt As Integer
Dim strAutoTextName As String
Dim objTableDays As Table
Dim iRow As Integer
Dim iCol As Integer
Dim ocboMonthStart As ComboBox
Dim ocboMonthEnd As ComboBox
Dim otxtYearStart As TextBox
Dim otxtYearEnd As TextBox
Dim strJazzyDayNames As String
Dim objFps As PageSetup
Dim objRng As Range
Dim sShortMargin As Single
Dim sLongMargin As Single
Dim strCaptionTxt As String
Dim iOrientation As Integer
Dim iNoPicture As Integer
Dim i As Integer
Dim strDays As String
On Error GoTo CreateNewDoc_Error
System.Cursor = wdCursorWait
Set ocboMonthStart = formWizard.cboMonthStart
Set ocboMonthEnd = formWizard.cboMonthEnd
Set otxtYearStart = formWizard.txtYearStart
Set otxtYearEnd = formWizard.txtYearEnd
With Application
.ScreenUpdating = False
.StatusBar = strStatusIntro
End With
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
If (formWizard.optPortrait) Then
iOrientation = iORTN_PORTRAIT
Else
iOrientation = iORTN_LANDSCAPE
End If
iNoPicture = Abs(formWizard.optPictureNo.Value)
'the margins have to be changed if papersize was changed in Common
If (fChangeToA4 Or fChangeToLetter) Then
Set objFps = ActiveDocument.PageSetup
If iOrientation = iORTN_LANDSCAPE Then
objFps.Orientation = wdOrientLandscape 'setting paper size in common
'resets orientation to Portrait
If fChangeToA4 Then
sShortMargin = sA4_SHORT_MARGIN
sLongMargin = sA4_LONG_MARGIN
Else
sShortMargin = sLETTER_SHORT_MARGIN
sLongMargin = sLETTER_LONG_MARGIN
End If
Else
If fChangeToA4 Then
sShortMargin = sA4_LONG_MARGIN
sLongMargin = sA4_SHORT_MARGIN
Else
sShortMargin = sLETTER_LONG_MARGIN
sLongMargin = sLETTER_SHORT_MARGIN
End If
End If
With objFps
.TopMargin = sShortMargin
.BottomMargin = sShortMargin
.LeftMargin = sLongMargin
.RightMargin = sLongMargin
End With
End If
strAutoTextName = StrBuildAutoTextName(True)
objWizTemplate.AutoTextEntries(strAutoTextName).Insert objActiveRange, True
If iCalendarStyle <> wzJAZZY Then
Set objActiveRange = ActiveDocument.Bookmarks(strBkMkDays).Range
Else
Set objActiveRange = ActiveDocument.Bookmarks(strBkMkDayNames).Range
End If
strJazzyDayNames = ""
For iCnt = iWeekStartDay To 6
strJazzyDayNames = strJazzyDayNames & rgstrDayName(iCnt) & vbTab
Next
For iCnt = 0 To (iWeekStartDay - 1)
strJazzyDayNames = strJazzyDayNames & rgstrDayName(iCnt) & vbTab
Next
'Strip trailing Tab
strJazzyDayNames = Left$(strJazzyDayNames, Len(strJazzyDayNames) - 1)
objActiveRange.Text = strJazzyDayNames
If iCalendarStyle <> wzJAZZY Then
If (iCalendarStyle = wzBANNER) And (iOrientation = iORTN_LANDSCAPE) And (iNoPicture = 0) Then
objActiveRange.Style = strSTY_BANNER_HDG3
Else
objActiveRange.Style = rgstrMonthNamesStyle(iCalendarStyle)
End If
objActiveRange.Select
Selection.ConvertToTable wdSeparateByTabs, 1, 7
End If
Set objActiveRange = ActiveDocument.Content
objActiveRange.Copy
iMonthCurr = CInt(ocboMonthStart.ListIndex) + 1
iYearCurr = CInt(otxtYearStart.Text)
lYearMonthCurr = (CLng(iYearCurr) * 100) + CLng(iMonthCurr)
lYearMonthEnd = (CLng(otxtYearEnd.Text) * 100) + (CLng(ocboMonthEnd.ListIndex) + 1)
'Create each month of the calendar
Do Until lYearMonthCurr > lYearMonthEnd
Application.StatusBar = strStatusPart1 & rgstrMonthName(iMonthCurr - 1) & strStatusPart2 & CStr(iYearCurr) & strStatusPart3
'Set month
If iCalendarStyle = wzJAZZY Then
ActiveDocument.Bookmarks(strBkMkMonth).Range.Text = CStr(iMonthCurr)
Else
ActiveDocument.Bookmarks(strBkMkMonth).Range.Text = rgstrMonthName(iMonthCurr - 1)
End If
'Set year
ActiveDocument.Bookmarks(strBkMkYear).Range.Text = CStr(iYearCurr)
'Determine number of days in month
If iMonthCurr = 2 Then
iDaysInMonth = DateSerial(iYearCurr, 3, 1) - DateSerial(iYearCurr, 2, 1)
Else
iDaysInMonth = rgiDaysInMonth(iMonthCurr - 1)
End If
'Set Column of First Day Of Month by using Weekday function. The 8th
'is used (to start with) instead of the 1st to allow for offsetting (via
'iWeekStartDay) for localization since the 8th will always fall on the
'same day (of the week) as the 1st.
iCol = WeekDay(DateSerial(iYearCurr, iMonthCurr, 8 - iWeekStartDay))
ActiveDocument.Bookmarks(strBkMkDays).Select
If iCalendarStyle <> wzJAZZY Then _
Selection.MoveDown wdLine 'the bookmark is now in the first cell of the table
strDays = ""
For i = 1 To iCol - 1
strDays = strDays & vbTab
Next i
strDays = strDays & str1_TO_28
For i = 29 To iDaysInMonth
strDays = strDays & vbTab & CStr(i)
Next i
'to get a 6 * 7 table always
For i = iDaysInMonth + iCol - 1 To 41
strDays = strDays & vbTab
Next i
Set objActiveRange = Selection.Range
objActiveRange.Text = strDays
objActiveRange.Style = rgstrDaysStyle(iCalendarStyle) & iOrientation & iNoPicture
objActiveRange.Select
Selection.ConvertToTable wdSeparateByTabs, 6, 7
Selection.Cells.Height = rgsDaysHeight(iCalendarStyle, iOrientation, iNoPicture)
Selection.Tables(1).Rows(1).Height = rgsMonthNamesHeight(iCalendarStyle, iOrientation, iNoPicture)
'========================================================
' Mn.Sept.01.2014; 08h21
' TABLE GRIDLINES CODE: Automatically creates printable gridlines in the table.
With Selection.Tables(1).Borders
.InsideLineStyle = wdLineStyleSingle
.InsideLineWidth = wdLineWidth100pt
.InsideColorIndex = wdAuto
.OutsideLineStyle = wdLineStyleSingle
.OutsideLineWidth = wdLineWidth100pt
End With
'========================================================
ActiveDocument.Bookmarks(strBkMkDays).Delete
'Advance the current month
If iMonthCurr = 12 Then
iMonthCurr = 1
iYearCurr = iYearCurr + 1
Else
iMonthCurr = iMonthCurr + 1
End If
lYearMonthCurr = (CLng(iYearCurr) * 100) + CLng(iMonthCurr)
If lYearMonthCurr <= lYearMonthEnd Then
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
'Insert Page Break
objActiveRange.InsertBreak wdPageBreak
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
objActiveRange.Paste
End If
Loop
Application.StatusBar = ""
strCaptionTxt = ""
'Set Application caption
strCaptionTxt = " - " & strAppCaptionPart1 & strAppCaptionPart1b & ocboMonthStart.Text & strAppCaptionPart2 & otxtYearStart.Text & strAppCaptionPart3 & ocboMonthEnd.Text & strAppCaptionPart4 & otxtYearEnd.Text
ActiveDocument.UndoClear
With ActiveWindow
.Caption = .Caption & strCaptionTxt
With .View
.TableGridlines = False
.ShowDrawings = True
End With
End With
'Position cursor at the top
Selection.HomeKey wdStory
CreateNewDoc_Exit:
Exit Sub
CreateNewDoc_Error:
ReportError Err
GoTo CreateNewDoc_Exit
End Sub ' CreateNewDoc
Public Sub InitCallBack(fDummy As Boolean)
Dim i As Integer
Dim objCallBackLabels As BalloonLabels
On Error GoTo ErrorCallBack
If Not (fBlnInitialized) Then
Set objPostWizBln = Assistant.NewBalloon
fBlnInitialized = True
With objPostWizBln
.Heading = strCallBackHeading
.Mode = msoModeModeless
.Button = msoButtonSetCancel
.BalloonType = msoBalloonTypeButtons
.Callback = "Calendar.fnCallBack"
End With
Set objCallBackLabels = objPostWizBln.Labels
objCallBackLabels.Count = iCALL_BACK_COUNT
For i = 1 To iCALL_BACK_COUNT
objCallBackLabels.Item(i).Text = rgstrCallBackMsg(i - 1)
Next i
End If
objPostWizBln.Show
If (Assistant.BalloonError) Then GoTo ErrorCallBack
fPostWizBlnOpen = True
Set objDocBln = ActiveDocument
Set clsBln.app = Application
ActiveDocument.Variables.Add strPOST_WIZ_BLN, "1"
Exit Sub
ErrorCallBack:
DisplayErrorMsg strERR_INIT_CALL_BACK
fPostWizBlnOpen = False
Set objDocBln = ActiveDocument
Set clsBln.app = Application
ActiveDocument.Variables.Add strPOST_WIZ_BLN, "0"
End Sub
Public Function fnCallBack(objBln As Balloon, iBtn As Integer, lPrivate As Long)
On Error GoTo ErrorCallBack
Select Case iBtn
Case Is < 1 'Exit
objBln.Close
fPostWizBlnOpen = False
ActiveDocument.Variables(strPOST_WIZ_BLN).Value = "0"
RestoreAssistant (True)
Case 1 'Remove existing picture
DisplayTip rgstrCallBackTip(0)
Case 2 'Enter information into calendar
DisplayTip rgstrCallBackTip(1)
Case 3 ' Get help
Assistant.Help
End Select
Exit Function
ErrorCallBack:
DisplayErrorMsg Err.Description
End Function
Private Function StrBuildAutoTextName(fDummy As Boolean) As String
Dim strATName As String
On Error GoTo BuildAutoTextName_Error
'Select base AutoText Name NOTE: DO NOT LOCALIZE
Select Case iCalendarStyle
Case wzBOXES
strATName = "Boxes"
Case wzBANNER
strATName = "Banner"
Case wzJAZZY
strATName = "Jazzy"
End Select
strATName = strATName & CStr(Abs(formWizard.optLandscape.Value))
strATName = strATName & CStr(Abs(formWizard.optPictureNo.Value))
StrBuildAutoTextName = strATName
BuildAutoTextName_Exit:
Exit Function
BuildAutoTextName_Error:
StrBuildAutoTextName = ""
Resume BuildAutoTextName_Exit
End Function
'displays a tip during post-wizard options
'assumes that Assistant is present since it is called from post-wizard balloon
Private Sub DisplayTip(strTip As String)
Dim objBlnTip As Balloon
On Error GoTo FatalError
Set objBlnTip = Assistant.NewBalloon
With objBlnTip
.Mode = msoModeModal
.Heading = strWizName
.Text = strTip
.Button = msoButtonSetOK
End With
objBlnTip.Show
If Assistant.BalloonError <> msoBalloonErrorNone Then GoTo FatalError
Exit Sub
FatalError:
Err.Clear
End Sub
The above is from the module labelled "Calendar". I don't believe anything was altered in the module labelled "Common", but please let me know that I should post it.
To recap, in this wizard file, the first day of the week is set for Monday. So the Saturday and Sunday columns always fall as the last 2 columns in the calendar table (Sunday as first day has the 1st and last column as the ones that would need shading).
How can that syntax be added to shade the last 2 columns in the Monday calendar wizard, and the 1st and last column for the Sunday calendar wizard and hopefully shading just those particular cells in either with numbers in them?
Thank you! Very much appreciated.

Thanks, Doug! Works beautifully. I tried them again this morning, really incredible!
I'm going to keep the Monday and Sunday wizard files as separate files because I realized that I don't have the skills (or the time) to try to figure out how to modify it so the user is requested the starting day. It'll be beyond my meager skills,
I'm sure, especially since there are all those dialogue boxes to contend with at the wizard's start. I was forgetting about those. So leaving these as 2 separate files where one chooses the starting day as per the title, the Monday one for Monday
and the other, the Sunday one, for a Sunday start day.
However, the only difference between them at this point is that one has a "0" for Sunday and the other a "1" for Monday, at the appropriate spots in the code. being the starting week day and the other a "1" for Monday.
That's it. They're beautifully the same in the rest of the code. And a further benefit is that only one module was touched at all for all of this, the Calendar module (leaving the one labelled "Common" untouched.
So anyone with a calendar wizard file can just change the piece of code below (begging the group's indulgence, if I may, in posting the modified code (??):
' WORD 97 WIZARD
' Calendar Wizard Specific Code
Option Explicit
' CONSTANT DECLARATIONS
'=============================== LOCALIZATION BLOCK ===============================
' Localization Note: iWeekStartDay is the starting day of the week (Sun = 0, Mon = 1, ...Sat = 6)
Public Const iWeekStartDay As Integer = 1
' Banter strings
Public Const strWarnYearReq As String = "Both starting and ending years are required."
Public Const strWarnMinExceeded As String = "The year can not be before 1900."
Public Const strWarnMaxExceeded As String = "The year can not be after 4095."
Public Const strWarnRangeExceeded As String = "The calendar is limited to 120 months (10 years)."
Public Const strAppCaptionPart1 As String = "Calendar: "
Public Const strAppCaptionPart1b As String = ""
Public Const strAppCaptionPart2 As String = ", "
Public Const strAppCaptionPart3 As String = " to "
Public Const strAppCaptionPart4 As String = ", "
' Status messages
Public Const strStatusIntro As String = "Creating Calendar..."
Public Const strStatusPart1 As String = "Creating "
Public Const strStatusPart2 As String = ", "
Public Const strStatusPart3 As String = "..."
' Assistant
Public Const strCallBackHeading As String = "Do more with the calendar?"
'Margins for A4 size (if wizard changes pagesize to A4)
Public Const sA4_SHORT_MARGIN As Single = 28.8
Public Const sA4_LONG_MARGIN As Single = 57.6
'Margins for Letter size (if wizard changes pagesize to Letter) in pts
Public Const sLETTER_SHORT_MARGIN As Single = 36
Public Const sLETTER_LONG_MARGIN As Single = 36
'========== END LOCALIZATION BLOCK - DO NOT MAKE CHANGES BELOW THIS LINE ==========
Public Const iYearMin As Integer = 1900
Public Const iYearMax As Integer = 4095
' Bookmark Names - DO NOT LOCALIZE
' Note: No spaces allowed in bookmark names
Public Const strBkMkMonth As String = "Month"
Public Const strBkMkDays As String = "Days"
Public Const strBkMkDayNames As String = "DayNames"
Public Const strBkMkYear As String = "Year"
' Calendar Style Names and Constants
Public Const wzBOXES As Integer = 0
Public Const wzBANNER As Integer = 1
Public Const wzJAZZY As Integer = 2
' Form Control
Public Const wzPAGE_START As Integer = 0
Public Const wzPAGE_STYLE As Integer = 1
Public Const wzPAGE_DIRECTION As Integer = 2
Public Const wzPAGE_MONTHS As Integer = 3
Public Const wzPAGE_FINISH As Integer = 4
'orientation
Public Const iORTN_PORTRAIT As Integer = 0
Public Const iORTN_LANDSCAPE As Integer = 1
' Assistant
Public Const iMAX_PANEL As Integer = 4 ' Number of last panel in MultiPage (First=0)
Public Const iCALL_BACK_COUNT As Integer = 3 ' Number of items in CallBackBalloon (First=1)
'postwizard balloon document variable
Public Const strPOST_WIZ_BLN As String = "Calendar post wizard balloon"
' VARIABLE DECLARATIONS
' General
Public rgstrMonthName(11) As String
Public rgstrDayName(6) As String
Public rgiDaysInMonth(11) As String
Public fDateError As Boolean
Public fCheckValidity As Boolean 'if set then the dates are checked for validity
'variables used in doc. creation
Public str1_TO_28 As String
Public rgsDaysHeight(2, 1, 1) As Single
Public rgsMonthNamesHeight(2, 1, 1) As Single
Public rgstrDaysStyle(2) As String
Public rgstrMonthNamesStyle(2) As String
Public strSTY_BANNER_HDG3 As String
' Assistant
Public rgstrAssistantMsg(iMAX_PANEL + 1) As String
Public rgstrCallBackMsg(iCALL_BACK_COUNT) As String
Public rgstrCallBackTip(iCALL_BACK_COUNT) As String
' Page 1
Public iCalendarStyle As Integer
Public iSavedStyle As Integer
' Page 2
' Page 3
' Page 4
Public Sub InitWizardName(fDummy As Boolean)
strWizName = "Calendar Wizard"
strWizLongName = strWizName
strWizShortName = "Calendar"
End Sub
Public Sub InitWizardStrings(fDummy As Boolean)
Dim i As Integer
On Error GoTo FatalError
'=============================== LOCALIZATION BLOCK ===============================
' Note: this list is indexed 0 - iMAX_PANEL
rgstrAssistantMsg(0) = "The Calendar Wizard helps you create a monthly calendar that you can customize with pictures and events. If you want to track and be reminded of events, you should probably use Microsoft Outlook, Microsoft Schedule+, or Microsoft Exchange."
rgstrAssistantMsg(1) = "Select the look you want for your calendar. The Jazzy style uses the Algerian font. If it is not installed on your system, copy alger.ttf from the Valupack folder on the Microsoft Office CD to your hard drive."
rgstrAssistantMsg(2) = "If you leave room for a picture, Word will insert a placeholder picture that you can replace with any picture you want."
rgstrAssistantMsg(3) = "Your calendar can start on any month, and you can make your calendar shorter than or longer than 12 months. Each month will appear on a different page."
rgstrAssistantMsg(4) = "To change any settings, click Back."
' Note: change constant iCALL_BACK_COUNT if number of items in list changes
rgstrCallBackMsg(0) = "Add, remove, or replace a picture"
rgstrCallBackMsg(1) = "Enter information into the calendar"
rgstrCallBackMsg(2) = "Get Help on Something Else..."
rgstrCallBackTip(0) = "To remove a picture, click on it and then press Delete. To add a picture, click where you want to insert the picture, point to Picture on the Insert menu, and then click From File."
rgstrCallBackTip(1) = "To enter information, click where you want to insert the text and start typing. To move between different dates in the calendar, press Tab to move forward or press Shift+Tab to move to the previous date."
'Load Month Name array
rgstrMonthName(0) = "January"
rgstrMonthName(1) = "February"
rgstrMonthName(2) = "March"
rgstrMonthName(3) = "April"
rgstrMonthName(4) = "May"
rgstrMonthName(5) = "June"
rgstrMonthName(6) = "July"
rgstrMonthName(7) = "August"
rgstrMonthName(8) = "September"
rgstrMonthName(9) = "October"
rgstrMonthName(10) = "November"
rgstrMonthName(11) = "December"
'Load Day Name array LOCALIZATION NOTE: DO NOT CHANGE THE ORDER IN WHICH THESE APPEAR!
' TO CHANGE THE WEEK START DAY, CHANGE THE CONSTANT iWeekStartDay
rgstrDayName(0) = "Sun"
rgstrDayName(1) = "Mon"
rgstrDayName(2) = "Tue"
rgstrDayName(3) = "Wed"
rgstrDayName(4) = "Thu"
rgstrDayName(5) = "Fri"
rgstrDayName(6) = "Sat"
'Load Days In Month array
rgiDaysInMonth(0) = 31
rgiDaysInMonth(1) = 28 'Will not be used - must be calculated for leap year accuracy
rgiDaysInMonth(2) = 31
rgiDaysInMonth(3) = 30
rgiDaysInMonth(4) = 31
rgiDaysInMonth(5) = 30
rgiDaysInMonth(6) = 31
rgiDaysInMonth(7) = 31
rgiDaysInMonth(8) = 30
rgiDaysInMonth(9) = 31
rgiDaysInMonth(10) = 30
rgiDaysInMonth(11) = 31
rgstrDaysStyle(wzBOXES) = "Boxes"
rgstrDaysStyle(wzBANNER) = "Banner"
rgstrDaysStyle(wzJAZZY) = "Jazzy"
rgstrMonthNamesStyle(wzBOXES) = "Boxes Heading2"
rgstrMonthNamesStyle(wzBANNER) = "Banner Heading2"
'we dont set the style for month names in Jazzy style
'the Banner style landscape calendar with picture uses Banner Heading3 style for month names
strSTY_BANNER_HDG3 = "Banner Heading3"
rgsMonthNamesHeight(wzBOXES, iORTN_PORTRAIT, 0) = 55
rgsMonthNamesHeight(wzBOXES, iORTN_PORTRAIT, 1) = 55
rgsMonthNamesHeight(wzBOXES, iORTN_LANDSCAPE, 0) = 36
rgsMonthNamesHeight(wzBOXES, iORTN_LANDSCAPE, 1) = 36
rgsDaysHeight(wzBOXES, iORTN_PORTRAIT, 0) = 56
rgsDaysHeight(wzBOXES, iORTN_PORTRAIT, 1) = 102
rgsDaysHeight(wzBOXES, iORTN_LANDSCAPE, 0) = 72
rgsDaysHeight(wzBOXES, iORTN_LANDSCAPE, 1) = 71
rgsMonthNamesHeight(wzBANNER, iORTN_PORTRAIT, 0) = 60
rgsMonthNamesHeight(wzBANNER, iORTN_PORTRAIT, 1) = 60
rgsMonthNamesHeight(wzBANNER, iORTN_LANDSCAPE, 0) = 55
rgsMonthNamesHeight(wzBANNER, iORTN_LANDSCAPE, 1) = 51
rgsDaysHeight(wzBANNER, iORTN_PORTRAIT, 0) = 64
rgsDaysHeight(wzBANNER, iORTN_PORTRAIT, 1) = 110
rgsDaysHeight(wzBANNER, iORTN_LANDSCAPE, 0) = 81
rgsDaysHeight(wzBANNER, iORTN_LANDSCAPE, 1) = 81
rgsMonthNamesHeight(wzJAZZY, iORTN_PORTRAIT, 0) = 73
rgsMonthNamesHeight(wzJAZZY, iORTN_PORTRAIT, 1) = 73
rgsMonthNamesHeight(wzJAZZY, iORTN_LANDSCAPE, 0) = 62
rgsMonthNamesHeight(wzJAZZY, iORTN_LANDSCAPE, 1) = 59
rgsDaysHeight(wzJAZZY, iORTN_PORTRAIT, 0) = 40.5
rgsDaysHeight(wzJAZZY, iORTN_PORTRAIT, 1) = 81.8
rgsDaysHeight(wzJAZZY, iORTN_LANDSCAPE, 0) = 58.2
rgsDaysHeight(wzJAZZY, iORTN_LANDSCAPE, 1) = 57.5
str1_TO_28 = ""
For i = 1 To 28
str1_TO_28 = str1_TO_28 & CStr(i) & vbTab
Next i
'strip off last tab
str1_TO_28 = Left$(str1_TO_28, Len(str1_TO_28) - 1)
' Location in registry DO NOT LOCALIZE
strRegSettingsKey = strREG_SETTINGS_BASE_KEY & "Calendar Wizard"
Exit Sub
FatalError:
ReportError Err
End Sub ' InitWizardStrings
Public Sub InitWizard(fDummy As Boolean)
' Global Vars
fWizardCallBack = False
fDateError = False
iCurrentPanel = 0
' Initialize strings
InitWizardStrings (True)
' Create a new instance of the form
Set formWizard = New formWizDlg
If formWizard Is Nothing Then GoTo FatalError
formWizard.lblWizName1.Caption = " " & strWizLongName & " "
Exit Sub
FatalError:
DisplayErrorMsg strERR_INIT_FORM
ReportError Err
End Sub
' fDummy prevents sub from appearing in Word Tools/Macro list
Public Sub SaveDialogValues(fDummy As Boolean)
On Error GoTo FatalError
' Display status
Application.ScreenUpdating = False
System.Cursor = wdCursorWait
StatusBar = strSAVE_SETTINGS
' Assistant
System.PrivateProfileString("", strREG_SETTINGS_BASE_KEY, strREG_ASSISTANT_TIME_STAMP) = Format$(Now, "General Date")
StoreValPref strREG_ASSISTANT_HELP, iLocalState
' Page 1
StoreValPref "iCalendarStyle", iCalendarStyle
' Page 2
StoreValPref "optPortrait", formWizard.optPortrait.Value
StoreValPref "optPictureYes", formWizard.optPictureYes.Value
' Page 3
StatusBar = ""
System.Cursor = wdCursorNormal
fSettingsSaved = True
Application.ScreenUpdating = True
Exit Sub
FatalError:
ReportError Err
End Sub
Public Sub RestoreDialogValues(fDummy As Boolean)
Dim i As Integer
On Error GoTo FatalError
' Display status
Application.ScreenUpdating = False
StatusBar = strRST_SETTINGS
System.Cursor = wdCursorWait
' Page 1
iCalendarStyle = IRestorePref("iCalendarStyle", 0)
Select Case iCalendarStyle
Case wzBOXES
formWizard.optBoxes.Value = True
formWizard.shpShadowBoxes.Visible = True
Case wzBANNER
formWizard.optBanner.Value = True
formWizard.shpShadowBanner.Visible = True
Case wzJAZZY
formWizard.optJazzy.Value = True
formWizard.shpShadowJazzy.Visible = True
Case Else
iCalendarStyle = wzBOXES
formWizard.optBoxes.Value = True
formWizard.shpShadowBoxes.Visible = True
End Select
' Page 2
If FRestorePref("optPortrait", False) Then
formWizard.optPortrait.Value = True
formWizard.shpPortraitShadow.Visible = True
formWizard.shpLandscapeShadow.Visible = False
Else
formWizard.optLandscape.Value = True
formWizard.shpPortraitShadow.Visible = False
formWizard.shpLandscapeShadow.Visible = True
End If
formWizard.optPictureYes.Value = FRestorePref("optPictureYes", False)
' Page 3
formWizard.cboMonthStart.ListIndex = Month(Date) - 1
formWizard.cboMonthEnd.ListIndex = Month(Date) - 1
formWizard.txtYearStart = Year(Date)
formWizard.txtYearEnd = Year(Date)
fCheckValidity = False
StatusBar = ""
System.Cursor = wdCursorNormal
fSettingsRestored = True
Application.ScreenUpdating = True
Exit Sub
FatalError:
ReportError Err
Exit Sub
End Sub ' RestoreDialogValues
' fDummy prevents sub from appearing in Word Tools/Macro list
Public Sub CreateNewDoc(fDummy As Boolean)
Dim iMonthCurr As Integer
Dim iYearCurr As Integer
Dim lYearMonthCurr As Long
Dim lYearMonthEnd As Long
Dim iDaysCnt As Integer
Dim iDaysInMonth As Integer
Dim iCnt As Integer
Dim strAutoTextName As String
Dim objTableDays As Table
Dim iRow As Integer
Dim iCol As Integer
Dim ocboMonthStart As ComboBox
Dim ocboMonthEnd As ComboBox
Dim otxtYearStart As TextBox
Dim otxtYearEnd As TextBox
Dim strJazzyDayNames As String
Dim objFps As PageSetup
Dim objRng As Range
Dim sShortMargin As Single
Dim sLongMargin As Single
Dim strCaptionTxt As String
Dim iOrientation As Integer
Dim iNoPicture As Integer
Dim i As Integer
Dim strDays As String
On Error GoTo CreateNewDoc_Error
System.Cursor = wdCursorWait
Set ocboMonthStart = formWizard.cboMonthStart
Set ocboMonthEnd = formWizard.cboMonthEnd
Set otxtYearStart = formWizard.txtYearStart
Set otxtYearEnd = formWizard.txtYearEnd
With Application
.ScreenUpdating = False
.StatusBar = strStatusIntro
End With
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
If (formWizard.optPortrait) Then
iOrientation = iORTN_PORTRAIT
Else
iOrientation = iORTN_LANDSCAPE
End If
iNoPicture = Abs(formWizard.optPictureNo.Value)
'the margins have to be changed if papersize was changed in Common
If (fChangeToA4 Or fChangeToLetter) Then
Set objFps = ActiveDocument.PageSetup
If iOrientation = iORTN_LANDSCAPE Then
objFps.Orientation = wdOrientLandscape 'setting paper size in common
'resets orientation to Portrait
If fChangeToA4 Then
sShortMargin = sA4_SHORT_MARGIN
sLongMargin = sA4_LONG_MARGIN
Else
sShortMargin = sLETTER_SHORT_MARGIN
sLongMargin = sLETTER_LONG_MARGIN
End If
Else
If fChangeToA4 Then
sShortMargin = sA4_LONG_MARGIN
sLongMargin = sA4_SHORT_MARGIN
Else
sShortMargin = sLETTER_LONG_MARGIN
sLongMargin = sLETTER_SHORT_MARGIN
End If
End If
With objFps
.TopMargin = sShortMargin
.BottomMargin = sShortMargin
.LeftMargin = sLongMargin
.RightMargin = sLongMargin
End With
End If
strAutoTextName = StrBuildAutoTextName(True)
objWizTemplate.AutoTextEntries(strAutoTextName).Insert objActiveRange, True
If iCalendarStyle <> wzJAZZY Then
Set objActiveRange = ActiveDocument.Bookmarks(strBkMkDays).Range
Else
Set objActiveRange = ActiveDocument.Bookmarks(strBkMkDayNames).Range
End If
strJazzyDayNames = ""
For iCnt = iWeekStartDay To 6
strJazzyDayNames = strJazzyDayNames & rgstrDayName(iCnt) & vbTab
Next
For iCnt = 0 To (iWeekStartDay - 1)
strJazzyDayNames = strJazzyDayNames & rgstrDayName(iCnt) & vbTab
Next
'Strip trailing Tab
strJazzyDayNames = Left$(strJazzyDayNames, Len(strJazzyDayNames) - 1)
objActiveRange.Text = strJazzyDayNames
If iCalendarStyle <> wzJAZZY Then
If (iCalendarStyle = wzBANNER) And (iOrientation = iORTN_LANDSCAPE) And (iNoPicture = 0) Then
objActiveRange.Style = strSTY_BANNER_HDG3
Else
objActiveRange.Style = rgstrMonthNamesStyle(iCalendarStyle)
End If
objActiveRange.Select
Selection.ConvertToTable wdSeparateByTabs, 1, 7
End If
Set objActiveRange = ActiveDocument.Content
objActiveRange.Copy
iMonthCurr = CInt(ocboMonthStart.ListIndex) + 1
iYearCurr = CInt(otxtYearStart.Text)
lYearMonthCurr = (CLng(iYearCurr) * 100) + CLng(iMonthCurr)
lYearMonthEnd = (CLng(otxtYearEnd.Text) * 100) + (CLng(ocboMonthEnd.ListIndex) + 1)
'Create each month of the calendar
Do Until lYearMonthCurr > lYearMonthEnd
Application.StatusBar = strStatusPart1 & rgstrMonthName(iMonthCurr - 1) & strStatusPart2 & CStr(iYearCurr) & strStatusPart3
'Set month
If iCalendarStyle = wzJAZZY Then
ActiveDocument.Bookmarks(strBkMkMonth).Range.Text = CStr(iMonthCurr)
Else
ActiveDocument.Bookmarks(strBkMkMonth).Range.Text = rgstrMonthName(iMonthCurr - 1)
End If
'Set year
ActiveDocument.Bookmarks(strBkMkYear).Range.Text = CStr(iYearCurr)
'Determine number of days in month
If iMonthCurr = 2 Then
iDaysInMonth = DateSerial(iYearCurr, 3, 1) - DateSerial(iYearCurr, 2, 1)
Else
iDaysInMonth = rgiDaysInMonth(iMonthCurr - 1)
End If
'Set Column of First Day Of Month by using Weekday function. The 8th
'is used (to start with) instead of the 1st to allow for offsetting (via
'iWeekStartDay) for localization since the 8th will always fall on the
'same day (of the week) as the 1st.
iCol = WeekDay(DateSerial(iYearCurr, iMonthCurr, 8 - iWeekStartDay))
ActiveDocument.Bookmarks(strBkMkDays).Select
If iCalendarStyle <> wzJAZZY Then _
Selection.MoveDown wdLine 'the bookmark is now in the first cell of the table
strDays = ""
For i = 1 To iCol - 1
strDays = strDays & vbTab
Next i
strDays = strDays & str1_TO_28
For i = 29 To iDaysInMonth
strDays = strDays & vbTab & CStr(i)
Next i
'to get a 6 * 7 table always
For i = iDaysInMonth + iCol - 1 To 41
strDays = strDays & vbTab
Next i
Set objActiveRange = Selection.Range
objActiveRange.Text = strDays
objActiveRange.Style = rgstrDaysStyle(iCalendarStyle) & iOrientation & iNoPicture
objActiveRange.Select
Selection.ConvertToTable wdSeparateByTabs, 6, 7
Selection.Cells.Height = rgsDaysHeight(iCalendarStyle, iOrientation, iNoPicture)
Selection.Tables(1).Rows(1).Height = rgsMonthNamesHeight(iCalendarStyle, iOrientation, iNoPicture)
'================================================================================================================================
' Tu.Mar.11.2015; 17h56 - MVPEdits/MyEdits
' SATURDAY and SUNDAY cells get shaded in the table (no matter where they fall).
' Doug Robbins - Word MVP; https://social.msdn.microsoft.com/Forums/office/en-US/6ab55be0-adc0-4e37-9565-8cdff089d20a/shading-certain-columns-depending-on-start-day-of-week?forum=worddev
Dim j As Long
With Selection.Tables(1)
If iWeekStartDay = 1 Then
For i = 6 To 7
With .Columns(i)
' For j = 1 To .Cells.Count ' 1 = Cells with SAT and SUN text are shaded
For j = 2 To .Cells.Count ' 2 = Cells with SAT and SUN text are _ NOT_ shaded
With .Cells(j).Range
If Len(.Text) > 2 Then
.Shading.BackgroundPatternColor = wdColorGray20 'wdColorGray_ _ _ (the number following gives the shade of gray, i.e., wdColorGray20 vs. wdColorGray50)
End If
End With
Next j
End With
Next i
Else
For i = 1 To 7 Step 6
With .Columns(i)
' For j = 1 To .Cells.Count ' 1 = Cells with SAT and SUN text are shaded
For j = 2 To .Cells.Count ' 2 = Cells with SAT and SUN text are _ NOT_ shaded
With .Cells(j).Range
If Len(.Text) > 2 Then
.Shading.BackgroundPatternColor = wdColorGray20 'wdColorGray_ _ _ (the number following gives the shade of gray, i.e., wdColorGray20 vs. wdColorGray50)
End If
End With
Next j
End With
Next i
End If
End With
'================================================================================================================================
'================================================================================================================================
' Mn.Sept.01.2014; 08h21 - MVPEdits/MyEdits
' TABLE GRIDLINES CODE: Automatically creates printable gridlines in the table.
With Selection.Tables(1).Borders
.InsideLineStyle = wdLineStyleSingle
.InsideLineWidth = wdLineWidth100pt
.InsideColorIndex = wdAuto
.OutsideLineStyle = wdLineStyleSingle
.OutsideLineWidth = wdLineWidth100pt
End With
'================================================================================================================================
ActiveDocument.Bookmarks(strBkMkDays).Delete
'Advance the current month
If iMonthCurr = 12 Then
iMonthCurr = 1
iYearCurr = iYearCurr + 1
Else
iMonthCurr = iMonthCurr + 1
End If
lYearMonthCurr = (CLng(iYearCurr) * 100) + CLng(iMonthCurr)
If lYearMonthCurr <= lYearMonthEnd Then
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
'Insert Page Break
objActiveRange.InsertBreak wdPageBreak
Set objActiveRange = ActiveDocument.Content
objActiveRange.Collapse wdCollapseEnd
objActiveRange.Paste
End If
Loop
Application.StatusBar = ""
strCaptionTxt = ""
'Set Application caption
strCaptionTxt = " - " & strAppCaptionPart1 & strAppCaptionPart1b & ocboMonthStart.Text & strAppCaptionPart2 & otxtYearStart.Text & strAppCaptionPart3 & ocboMonthEnd.Text & strAppCaptionPart4 & otxtYearEnd.Text
ActiveDocument.UndoClear
With ActiveWindow
.Caption = .Caption & strCaptionTxt
With .View
.TableGridlines = False
.ShowDrawings = True
End With
End With
'Position cursor at the top
Selection.HomeKey wdStory
CreateNewDoc_Exit:
Exit Sub
CreateNewDoc_Error:
ReportError Err
GoTo CreateNewDoc_Exit
End Sub ' CreateNewDoc
Public Sub InitCallBack(fDummy As Boolean)
Dim i As Integer
Dim objCallBackLabels As BalloonLabels
On Error GoTo ErrorCallBack
If Not (fBlnInitialized) Then
Set objPostWizBln = Assistant.NewBalloon
fBlnInitialized = True
With objPostWizBln
.Heading = strCallBackHeading
.Mode = msoModeModeless
.Button = msoButtonSetCancel
.BalloonType = msoBalloonTypeButtons
.Callback = "Calendar.fnCallBack"
End With
Set objCallBackLabels = objPostWizBln.Labels
objCallBackLabels.Count = iCALL_BACK_COUNT
For i = 1 To iCALL_BACK_COUNT
objCallBackLabels.Item(i).Text = rgstrCallBackMsg(i - 1)
Next i
End If
objPostWizBln.Show
If (Assistant.BalloonError) Then GoTo ErrorCallBack
fPostWizBlnOpen = True
Set objDocBln = ActiveDocument
Set clsBln.app = Application
ActiveDocument.Variables.Add strPOST_WIZ_BLN, "1"
Exit Sub
ErrorCallBack:
DisplayErrorMsg strERR_INIT_CALL_BACK
fPostWizBlnOpen = False
Set objDocBln = ActiveDocument
Set clsBln.app = Application
ActiveDocument.Variables.Add strPOST_WIZ_BLN, "0"
End Sub
Public Function fnCallBack(objBln As Balloon, iBtn As Integer, lPrivate As Long)
On Error GoTo ErrorCallBack
Select Case iBtn
Case Is < 1 'Exit
objBln.Close
fPostWizBlnOpen = False
ActiveDocument.Variables(strPOST_WIZ_BLN).Value = "0"
RestoreAssistant (True)
Case 1 'Remove existing picture
DisplayTip rgstrCallBackTip(0)
Case 2 'Enter information into calendar
DisplayTip rgstrCallBackTip(1)
Case 3 ' Get help
Assistant.Help
End Select
Exit Function
ErrorCallBack:
DisplayErrorMsg Err.Description
End Function
Private Function StrBuildAutoTextName(fDummy As Boolean) As String
Dim strATName As String
On Error GoTo BuildAutoTextName_Error
'Select base AutoText Name NOTE: DO NOT LOCALIZE
Select Case iCalendarStyle
Case wzBOXES
strATName = "Boxes"
Case wzBANNER
strATName = "Banner"
Case wzJAZZY
strATName = "Jazzy"
End Select
strATName = strATName & CStr(Abs(formWizard.optLandscape.Value))
strATName = strATName & CStr(Abs(formWizard.optPictureNo.Value))
StrBuildAutoTextName = strATName
BuildAutoTextName_Exit:
Exit Function
BuildAutoTextName_Error:
StrBuildAutoTextName = ""
Resume BuildAutoTextName_Exit
End Function
'displays a tip during post-wizard options
'assumes that Assistant is present since it is called from post-wizard balloon
Private Sub DisplayTip(strTip As String)
Dim objBlnTip As Balloon
On Error GoTo FatalError
Set objBlnTip = Assistant.NewBalloon
With objBlnTip
.Mode = msoModeModal
.Heading = strWizName
.Text = strTip
.Button = msoButtonSetOK
End With
objBlnTip.Show
If Assistant.BalloonError <> msoBalloonErrorNone Then GoTo FatalError
Exit Sub
FatalError:
Err.Clear
End Sub
Thank you once again for all your help!! Very much appreciated. :D

Losing Events, Places, Faces and other problems in iPhoto

Bought the new iMac in January; carefully transferred photos from old G4 and took ages updating the details using the great events/places/faces etc facility. Recently 2 things happened - I bought a new camera (Nikon D500); imported and updated event/place/face etc; all working fine. Days later got an upgrade iPhoto message - dutifully did so. Next time opened iPhoto got message to upgrade database - did so. I think there was a message reporting that this was necessary to secure the database; but I was not really concentrating on this merely assuming that my "new" software would not create any problems (how wrong could I have been?!)
RESULT?
- lost ALL place/face details;
- photos still grouped as Events folder but only with with the old camera date format.
- "Albums" directory with titles from old iPhoto version on G4 machine re-appeared!
- In Finder file-path from root Pictures>iPhoto>Library>[subdirectories by year etc] replaced by a single iPhotodatabase that can only be accessed by opening using iPhoto
- iPhoto created a "recovered photos" subfolder in "albums".
I also notice that the Browse facility used to attach photos in Mail is also rendered useless - clicking one photo fails to attach a photo; i can click and drag one photo into an e-mail; but this goes into the e-mail body rather than as an attached item.
Any suggestions that allow me to recover the information so painstakingly entered will be useful.
I notice a lot of comments suggesting problems with iPhoto 8.1.1 - but I cannot see anything on the site similar to my problem - is this something that Apple are aware of and working on?
Steve

Welcome to the Apple Discussions.
Lets clear some things up first:
In Finder file-path from root Pictures>iPhoto>Library>subdirectories by year etc replaced by a single iPhotodatabase that can only be accessed by opening using iPhoto
This is normal. Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. (See below for details on how to access your files)
I also notice that the Browse facility used to attach photos in Mail is also rendered useless - clicking one photo fails to attach a photo; i can click and drag one photo into an e-mail; but this goes into the e-mail body rather than as an attached item.
This is normal. That's how Mail works with Photos in an Email. Altering that is a matter for Mail. Elect to send Plain Text Emails. Note that how the email looks on your Mac has very little bearing on how it will appear on the receivers machine. It's pretty much 100% dependent on the setting on their email client.
As to the missing Faces/Places etc. This sounds like a damaged database file:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Failing that, restore from your back up.
As promised:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Regards
TD

Want to display a date in column heading.

Hi all,
Will be thankful, if anyone can tell me how to solve one of the issue i am facing in webi variable display.
In universe, i am creating one prompt for date and user will enter the desired date, and with respect to that date, the previous date and previous month last working date will come. In my Webi report , i have 3 dates and one measure(Quantity) with other dimensions like Product and Subproduct.
I have one cross table in which in want to show the 3 dates as Column heading, Product as row heading and Quantity(measure) in the table body. I have one more dimension as Area... which i want to show in horizontal way, for each Area, i want to show prompted date, previous date and previous month last date. I have created 3 variables....
1. Current date = Max(date) In Report
2. Previous date = Min(date) In Report
3. Previous Month last day = (date) where (Rank = 2) ForEach(date)
By this way, I am able to show Current date and Previous Month last day in column heading, but not Previous day. Will appreciate if anyone can help me on the issue. let me know if any other information is required.
Thanks
Archit Sarwal

Hi,
The previous date is the previous business day, it can be dynamic. And previous month's last day is last business day, it can also be dynamic. And Previous daye can also be previous month's last business day in one of the scenerio.
Actually i am using 3 filters with prompts (common prompt) in universe side. User will enter the date and corrosponding previous business day and previous month's last business day will come. 3 filters are:
1. Current_Day = @prompt('Enter Date(YYYYMMDD)','A',,Mono,Free,Persistent)
2. Previous_Day = (SELECT TOP 1 Date from [TableName] where Date < @prompt('Enter Date(YYYYMMDD)','A',,Mono,Free,Persistent) Order By Date Desc)
3. Prior_Month last Day = (SELECT TOP 1 Date from [TableName] T where Month(T.Date) = Month(DateAdd(mm,-1,@prompt('Enter Date(YYYYMMDD)','A',,Mono,Free,Persistent))) Order By T.Date Desc)
Dates are coming correct from Universe. In Webi, i have created variables...
CurrentDate = max([Date]) In Report
LastDate = Min([Date]) In Report
PriorDate = [(Date]) where ([Rank]=2) ForEach ([Date])
I have calculated Rank for Date, and Rank 2 shows the Prior Date. Also, i have Entity, and want to show these dates for each entity along with 2 -3 more columns that depends on these 3 dates values. I am attaching the screenshot for the sample.
Thanks
Archit Sarwal

How to get data with out having any date/timestamp columns by year wise

hi,
how can i select years wise rows from tables,if that have not any date/timestamp column.

Well Govind it quite depends on what is the data type of that column and the format in which it is stored.
If the data type is varchar2/varchar and all the values are in a uniform format then there is no problem. All you need to use is the to_date function to convert the supplied strings to default date format and then use to_char function to only extract the YY or YYYY or RR or RRRR aspect of the data.
For example: If the column is called 'hire_date' and it's data type is varchar2 and the entries in this column are all in a uniform format, say month,date,year like January,12,1999. What you need to do is convert this string to a default date value using to_date function, like to_date(hire_date,'format_model') In the format model mention the format of the hire_date string. The out put of this function can be fed into to_char to extract the year, like to_char(output_of_to_date,'YYYY')
I hope you got what I meant. Let me know if it was of any use.

Display last 12 months data in column chart

Hi All,
I have one dashbord requirement in list box i have (example:): "oct-11" i need to display previous 12 mnth data in column chart anybody help in excel formula how to display last 12 mnths based on list box selection.
example: if i select oct-11 from list box i need to display in chart like
nov-10 dec-10 nov-10...................................oct-11
please provide how to write in logic in excel

Hi Shankar,
Try this formula in excel : DATE(YEAR(A1),MONTH(A1)-1,DAY(A1))
A1 will be your cell which is the destination of your List box. & then drag it till 12 months.
If you are not having day from your list box then manually enter 1 in any cell and map that cell in place of A1 for day.
HTH.
Neeraj..

Find Sum of grouped events by date

I'm using Report Builder 10.50.2500.0
I've been trying to do this for awhile and have run out of ideas to try. I think it's a simple solution but I can't figure it out.
I have a database that is used for events. A booking can have several different events associated with it, even on the same day at different times. The events can be classified as breakfast, lunch or dinner events.
The report is grouped by type of event, then by event date (not datetime, the overall date), then grouped by booking.
Basically, I need the sum the total attendance of each breakfast, lunch, and dinner event by date and by booking.
For breakfast events I have this code on the Event Classification group row:
=iif(Fields!EventClassification.Value = "Breakfast",SUM(Fields!CurrentAttendance.Value),0) and the same for lunch and dinner. This works except when when there is more than one event per day.
For example, on 6/11/13 there is one lunch event and one dinner event. The report shows
Date
EventName
Breakfast
Lunch
Dinner
6/11/13
EventName
0
50
0
6/11/13
EventName
0
0
50
When what I want is:
Date
EventName
Breakfast
Lunch
Dinner
6/11/13
EventName
0
50
50
Any ideas? I've tried using group variables and passing to a report variable and acting on that but that didn't work out properly.

Hi Jmelinda,
In order to achieve your requirement, we can refer to the following steps:
In the Row Groups pane, right-click the Details group to add a parent group grouped by Date field.
Right-click the Date group to add a parent group grouped by Date field.
Right-click the Date group to add a total row after the group.
Delete the second and third columns with “Delete columns only” option for Date field.
Type the expression below to the total row for Breakfast column, and the same for lunch and dinner:
=sum(iif(Fields!EventClassification.Value = "Breakfast", Fields!CurrentAttendance.Value, 0))
Set the visibility of second row to Hide.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Substr of date as Column name

Hi All,
Can we have substr(date) as column name. I am trying to create a query where in I need to achieve something like this
select s.xyz Today,
s.abcd "6 Months ago" || to_char(add_months(sysdate,-6),'Mon rrrr') ||')'
from sales_tab s
Any idea.
Thanks,

BarbaraBoehmer wrote:
SCOTT@orcl12c> CREATE TABLE sales_tab
2    (xyz   NUMBER,
3      abcd NUMBER)
4 /
Table created.
SCOTT@orcl12c> INSERT INTO sales_tab VALUES (1234, 24563)
2 /
1 row created.
SCOTT@orcl12c> VARIABLE g_ref REFCURSOR
SCOTT@orcl12c> DECLARE
2    v_sql VARCHAR2(32767);
3 BEGIN
4    v_sql := 'SELECT xyz "Today",
5              abcd "6 Months ago ('
6              || TO_CHAR (ADD_MONTHS (SYSDATE, -6), 'Mon YYYY')
7              || ')"
8           FROM    sales_tab';
9    OPEN :g_ref FOR v_sql;
10 END;
11 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> PRINT g_ref
     Today 6 Months ago (Feb 2013)
      1234                   24563
1 row selected.
Ok.
Exactly what I was talking about. Creating a customized, date dependent column header in the report.

Place Holder Formula column in reports doing problem

Hi
I am working on some existing reports where there are many palceholders formula coloumns using no return values and they are blank and giving me errors
can anybody tell me what should i write on that place holder formula columns for the return values
should i write return 0 fro number and return null for char
or any other values from some package or field
please guide me
Thanks
Junaid

palceholders formula coloumns Are they placeholder Items or formula items ? As you say they are missing return values i would guess its formula-items.
should i write return 0 fro number and return null for char In general, formual items should return some meaningful value depending on the requirement behind the report, if they do not:
Are they used somewhere in the report ? If not, delete them instead of returning some useless value. If they are used, you're up to the requirement again and have to check whats the sense behind it.

Binding Datagrid XML Data

Hi,
Summary: I cannot get my DataGrid binding with XML data.
Specifically, I cannot bind a DataGridColumn with a child of a
child using the dataField property. However, I can bind with a
direct child.
I'm currently building an application where I retrieve data
from a XML database and contact it through posting a XQuery to the
database. I set the resultFormat of my HTTPServer to "e4x".
quote:
<mx:HTTPService id="searchRequest" url="
http://localhost:8080/exist/rest/db/"
contentType="application/xml" useProxy="false"
method="POST" resultFormat="e4x" />
I receive this data:
quote:
<exist:result exist:hits="1" exist:start="1"
exist:count="1" xmlns:exist="
http://exist.sourceforge.net/NS/exist">
<schedule>
<tournament>
<sport>Testing Our DTD</sport>
<tname>Well-formed Document</tname>
<match>
<mdate>Oct. 12, 2007</mdate>
<competitor>
<cname>sd</cname>
<score>2</score>
</competitor>
<competitor>
<cname>sdgs</cname>
<score>3</score>
</competitor>
<location>
<city>San Luis Obispo</city>
<state>CA</state>
<country>USA</country>
<stadium>Test Stadium, OPTIONAL</stadium>
</location>
<tv>SVN</tv>
<description>Basic testing...</description>
</match>
</tournament>
</schedule>
</exist:result>
I receive the data fine however, I cannot nested
elements of the XML nodes I retrieve. Here is my data grid.
quote:
<mx:DataGrid id="grid" width="446" height="100%"
dataProvider="{searchRequest.lastResult.schedule.tournament.match}"
enabled="true">
<mx:columns>
<mx:DataGridColumn headerText="Tournament" />
<mx:DataGridColumn headerText="Match Date"
dataField="mdate" />
<mx:DataGridColumn headerText="Sport" />
<mx:DataGridColumn headerText="City"
dataField="location.city"/>
<mx:DataGridColumn headerText="State"
dataField="location.state"/>
</mx:columns>
</mx:DataGrid>
The 'mdate' shows up however, 'location.city'
and 'location.state' do not. I am not sure how the dataField works.
Does it get the 'current' node and allow me to drill down in the
XML node?
I will note that I can get it working with a labelFunction
and an ItemRenderer. I feel that using either of those methods for
this is a bit verbose.

The default DGColumn picks up the property value by doing
data[dataField]. Due to this the nested value would not be picked
up.
By extending DGColumn and overriding the itemToLabel function
it is possible to get the desired functionality by adding code to
detect "field1.field2" kind of dataField value and returning the
nested value.
This custom DGColumn can be used whererever the functionality
is desired.

Summing Selected Rows in Column Depending on Value in Another Column

I'd like to sum only the values in selected rows in a given column depending on the value of another column in the same row. For example, suppose I have a table (please disregard the underscores, needed for correct alignment):
___A____B____C___D
1__5___10___15___0
2_20___25___30___1
3_35___40___45___1
4_50___55___60___0
5__sum(D=1)
In cell B5, I'd like to compute the sum of only rows in column B for which the value of the corresponding column D is 1. In this case B5 would be 65.
How can I do this using functions? Is it possible to do it for a variable range of rows without specifying each row individually?
Thanks,
Dave

You should place your formula to other collumn then calculated ones or in another table. You will be able to calculate whole collumns with: =SUMIF(D;“=1”;B)
Formula for your example is: =SUMIF(D1:D4;“=1”;B1:B4)
VB

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Training and Event Management Data Load

Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
Thanks

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

Grideview Bind Event - Place data in column depending on result

Similar Messages

Maybe you are looking for